How to define Shipping Type as Item Level?

Hello all,
Currently the Shipping Type field (VBKD-VSART) is defined as Header Level.
What to do in order to modify Shipping Type as Item Level?
Many Thanks,
Barbara

Hello all,
I will try to be more clear in my doubt of this tread:
Current when we create a Sales Order the Shipping Type data (Sls Order/Header/Shipping TAB) is a HEADER LEVEL Data.
I need to modify that. The Shipping Type data I need to be a ITEM LEVEL Data.
Reason: In a order with several ITENS. I need to have the possibility of having different types of Shipping Type for each item.
Shipping Type table/ field name = VBKD-VSART
Thanks,
Barbara

Similar Messages

Inter company PO Shipping Tab in item level.

Hi Everybody,
I want to make Inter company PO but I am not getting the Shipping Tab in item level. All Sales view is maintained in Material Master for both the Plant and Material. Could anybody help regarding the Settings of Shipping point to get Shipping tab while creating the PO.
If any Sales module setting if required please inform.
Already for one Plant it is getting, but same I have to maintain for another Plants.
At backend supply plant & receiveing Plant for Doc type is maintained and checking rule is also assinged.
regards,

have u dont the setting for shiping date for plants
do the setting for the plant
create a customer for a plant and assign in following
spro-- mm-purcpur ordset up sto
Define Shipping Data for Plants
ur issue will be solved
Message was edited by:
Umakant Bhangale

How to define the detail "Condition" item for sales order?

Hi, I checked the condition information of a sales order, the following contents were displayed:
PR00 Price 230.00
 Gross Value 230.00
 Discount Amount 0.00
 Net Value for Item 230.00
 Net Value 2 230.00
 Net Price 230.00
I can understand that the price 230.00 can be maintained via tcode: vk11, what I want to know is:
How to define/control the following items such as:
Gross Value 230.00
Discount Amount 0.00
Net Value for Item 230.00
Net Value 2 230.00
Net Price 230.00
and how to control their currency?
Thanks.

Hi, Dear Ferry Lianto,
Thank you very much.
Commonly I know the total pricing procedures.
But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
For example, I can see the following kind of
contents in the Tab:condition of a sales order:
PR00 Price 130.00000 TEST 100
 Gross Value 20.12 USD 100 <-how to
 Discount Amount 0.00 USD 100
 Rebate Basis 20.12 USD 100
 Net Value for Item 20.12 USD 100
 Net Value 2 20.12 USD 100
 Net Value 3 20.12 USD 100
VPRS Cost 27.22 HKD
 Profit Margin 16.61 USD
The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
Thanks and regards.

How to find the header and item level status of a CRM contract ?

Hi,
Few questions
A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
B. How to get the BPs associated with a contract ?
Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
Note:
1.     It doesnt store the Business Partner
       responsible for the transaction. To
       get the Partner No, link it with
       CRM_ORDER_INDEX.
2.     This table can be used for search
       based on the Object Id(Business
       Transaction No).
CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
CRMD_LINK     Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
Note:
1.     It doesnt store the Business
      Transaction No (Object ID).
      To get the Business Transaction No
      link the table with
      CRMD_ORDERADM_H
2.   This table can be used for search
      based on the Partner No
CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
Pl.reward points.......

Please help me how to define step by step multi level a hierarchy in BW?

Hi expert.
Please help me how to define step by step multi level a hierarchy in BW?
HieuLM
Edited by: hieulm_VietNam on Oct 11, 2011 11:21 AM

Hi all,
I want to create a Hierarchy base on Product hierarchy attribute in 0Material characteristic.
I want 4 level :
1. SBU
2. BRAND
3. SUBBRAND
4. Material Number
In Product hierarchy I have a string store 4 level like 01.001.0001
Ex :
01 : is BUNS (SBU)
001 : is ALOHA (BRAND)
0001 : is FRESH (SUBBRAND )
Please help me how to capture this information like that, I want to drill down by level examble drill down from SBU to BRAND,...
Thanks
HieuLM

Shipping point at Item Level of a Sales Order

Dear Gurus,
Can anyone explain to me step by step how can I copy:
1- The shipping point
2- The route
At Item level of a Sales Order in VA01
Many thanks
Regards
Chris

Dear Gurus,
Can anyone explain to me step by step how can I copy:
1- The shipping point
2- The route
At Item level of a Sales Order in VA01
Many thanks
Regards
Chris
Hi Chris,
Answer to your Question,
Please understand that Shipping Point and Route will be automatically determined based on the configuration settings we make. However we can even override the values manually in sales order screen (Va01 / Va02). See below the config settings to be made for Shipping point and Route:
1. Shipping Point.
Based on the combination of below three parameters, Shipping Point will automatically populate while creating a Sale order. (VA01)
          Shipping Condition
          Loading Group
          Delivering Plant
SPRO- Logistics Exceution - Shipping - Basic Shipping Functions - Shipping Point and Goods Receiving Point Determination - Assign Shipping Points
2. Route
Based on the following Four factors from configuration:
Departure Zone of Shipping Point
Destination Zone of Customer (Shipto)
Shipping Condition from Customer master.
Transportation Group from Material Master.
Hope this Solves your Issue.
Regards,
VBASHA

How to extract tax amount in item level from a Purchase order

Hi experts,
How to extract the tax amount data for each item in a Purchase order.
I am using the data sources 2lis_02_itm, 2lis_02_scl, 2lis_02_S012.
Please provide me which data source brings this tax amount data in item level and also the technical
field name of tax amount.
<Removed by moderator - soliciting points for answers is frowned upon>
Regards,
Bhadri M.
Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

Dear Bhadri
Did you look 2LIS_13_VDKON data source whther it can throw or not for billing related. Here you should look some billing conditions relates to particular document like taxable or not.
(KAWRT, KAWRT_K, BIWGEO)
Those informations will be maintained each with billing conditions.
May not sure. Please look.
Raju Saravanan

No condition types at Item Level

In the header of a sales order the Pricing procedure is triggered but at item level there are no condition types in the condition tab.
I have maintained condition records for few condition types as well but still the condition tab is blank.
What could be the possible cause of it?

Hi Christino,
Please check up whether these condition types for which you have maintained condition records are header condition or item conditions?
Regards
Mohammed Roshan

How to update Shipping Type(LIKP-VSART) of Delivery order

Hi all,
1st, i created a DO by the BAPI : BAPI_DELIVERYPROCESSING_EXEC, but there is no field of Shipping type,
I want to update the Shipping type of delivery Order, one of a field in the header data of DO(VL03N), refrence the DB field LIKP-VSART. can you give me a BAPI or FM to update this field.
Thanks a lot.

Hi,
I'm also facing the same problem, can any one suggest me how to fix this issue with this BAPI
BAPI_DELIVERYPROCESSING_EXEC.
Thanks
Venkat

How to define complex type with table per record?

Hi,
for one of my tasks I'm dealing with XML export. After short investigation of the postings in the forum I found an acceptable solution:
Re: Convert ABAP to XML and Vice versa
The issue is that I need an XML file like this:
<plant>
<material>
 <purchases>data</purchases>
 <purchases>data</purchases>
 <purchases>data</purchases>
 <sales>data</sales>
 <sales>data</sales>
 <sales>data</sales>
</material>
<next material>
</next material>
</plant>
So here are the questions:
1. Is it possible (and how) to define such deep structured type where for each record (means material) there is at least 1 internal table connected to that record? That would let me use a record-2-DOM conversion and a standard DOM-2-XML renderer.
2. Could anyone please provide a very simple and short example?
Of course, I could write my own XML renderer and achieve what I need (without using DOM, simply write to file all the desired XML tags while looping at my *nested* tables), but if there is a way to define such a structured type and further to fill it with data, it would help me learn a little bit more about abap opportunities and would save me a bit more time to create a renderer.
Many thanks in advance.
Regards,
Ivaylo Mutafchiev

Hi,
You can declare deep structure as below
TYPES : BEGIN OF ty_address,
 house(10) TYPE c,
 street(10) TYPE c,
 END OF ty_address.
TYPES : BEGIN OF ty_itab,
 name(10) TYPE c,
 age TYPE i,
 address TYPE ty_address OCCURS 0,
 END OF ty_itab.
DATA : i_address TYPE STANDARD TABLE OF ty_address,
 i_itab TYPE STANDARD TABLE OF ty_itab.
DATA : wa_address TYPE ty_address,
 wa_itab TYPE ty_itab.
CLEAR : wa_address,
 wa_itab.
wa_address-house = 'House1'.
wa_address-street = 'Street1'.
APPEND wa_address TO i_address.
wa_address-house = 'House2'.
wa_address-street = 'Street2'.
APPEND wa_address TO i_address.
wa_itab-name = 'Test'.
wa_itab-age = 10.
wa_itab-address[] = i_address[].
APPEND wa_itab TO i_itab.
Also check structure BSPL_GRID_FIELDCAT field CELL_COLOR

How to define different styles to different levels of hierarchical titles?

With difficulty, I found how to define a style for hierarchical titles, i.e.:
1. First level
1.1. Second level
1.1.1. Third level
etc.
But all levels will have the same character parameters (font, size, etc).
What I would like is, e.g.:
1. First level
1.1. Second level
1.1.1. Third level
In MS Word, it is easy: you define a different style for each level. In Pages, I found no way to do this, and no clue in the user's manual.
Is it possible (I guess it should be), and if so, how?
Thanks
Éric

You need to use the Styles Drawer. Go to: View > Show Styles Drawer. To define a Style, highlight the formatted text then click the plus sign at the bottom of the styles drawer. To delete a style, secondary click on the style and choose Delete Style.

Sales order: How to add pricing conditions at item level in BDC of VA01

Hello Experts,
Am writing BDC for sales order, in this process I need to add ITEM PRICING CONDITIONS, so, am selecting item and pressing the DOLLAR symbol button and am adding the conditions by pressing PLUS button in loop!! but am getting this erorr- Field KOMV-KMEIN (2) is not an input field!! when I execute it in we19-BACK GROUND only!! if I execute the same CODE IN we19-Fore ground, I dont have any issue!! I checked this SDN (field status in config), Google, but did not helped me!
Pls. let me know is there any other way to add conditions at item level in VA01 in BDC code?
THank you

Hi,
It is happening because the second row of the item level data screen is becoming display only. Please check whether In foreground mode you are pressing an extra enter to give data in the second row of the item level data after giving data in the first row and in BDC recording you have not recorded that 'Enter'.
Regards,
Gargi

How to define attributes at view object level ?

Hi,
I am defining one attribute at view level and also i am declare a bind variable.
eg: attribute name:days Bind variable: :Enter_The_Days
and In the days attribute-->(scheduledshippeddate-requestdate)
and In the where condition Days>:Enter_The_Days
But at the time of running the application module,It returns error. Can you please help me on tha.

It returns errorWhat error does it return?
John

Hi all How to define data type 'P' in structure.

Hi all,
I need to create data element having type P with 2 decimal pt in se11.
Plz suggest me which type should I use to create such element as there is no data type as P in se11.

Hi,
Yes there is no data type 'P' in se-11 for data element.
there two way you can define the D.E
-one is by define with type 'CURR' and give length and decimal places suppose if you define cust_money as curr length is 12 with in you can give decimal places as 2 or 3 etc a/c your requirement.
-secon one is you can use the type as 'DEC' and give the legth and decimal places as explained above.
before creating the data element you can check r they any built in dataelements avialbe suppose for DEC* give in se11 and press F4 then u can find out the list of D.E like there are already some d.E like dec8_2,dec25,DEC11_2 etc...
Reward with points if helpful.
Regards,
Vijay

How to define action type of a personalised item

I have an existing table in a existing OAF page.it has two column one "Quantity" and one "Amount".I have to add another column"Price" in this table.My requirement is that once "Quantity" and "Price" are entered and tabbed out from the Price field the "Amount" field should get calculated(Amount=price*quantity)and displayed.
Now what I am doing is that I have created price column through personalization but there is no attribute where I can specify the action type or event type for the price column so that I can calculate the amount field by capturing that event.
I have also checked the existing Quantity column if it has such action type defined or not but there is no such action type defined.
Please tell me how it can be implemented and whether it is possible or not.
please reply if you want more clarification.

If there is no action type field for your bean, then You should try to create it dynamically through the controller code. There you will have access to all the properties of bean.
--Shiv

How to define Shipping Type as Item Level?

Similar Messages

Maybe you are looking for