How to define source value for filtered recordset (ASP)

Hi,
I'm using ASP & CS4. I have a search page which upon submission sends form parameters to a results page. The results page matches the search parameters to a recordset and returns the appropriate record/s.
How can I take one of the values from the returned filtered recordset (which wasn't one of the original variables/parameters), and use it as a value to filter another recordset from another table? Do I have to create a parameter from that value, or can it be done in a SQL statement?
Many thanks

How many results are returned from the first recordset? Where is the second recordset to be displayed?
If the first RS returns a single row and the second RS is displayed on the same page, you don't need to create anything. Just use the value of the column you want in the SQL statement. If you need to pass the value to another page, you can either set a session variable or pass the value in the querystring.

Similar Messages

  • How to define a Value for an Attribute of an Class

    Hi,
    How to define a Value for an Attribute of a Class ...
    ( I need to change the value of an Attribute of a class in standard program ....
    Ex...
       cl_hrce_masterswitches=>infotype_framework_is_active
    Here infotype_framework_is_active is the attribute .. its value in standard program is 'X'... Now i need to change it as '  '.
    How to define it and set value as ' '.

    Hello Surendar
    The static attribute INFOTYPE_FRAMEWORK_IS_ACTIVE is read-only and there is not SETTER method to manipulate its value.
    However, the attribute is filled in the CLASS_CONSTRUCTOR:
    METHOD class_constructor.
        IF ce_is_active                 = true OR
           global_payroll_is_active     = true OR
           mngmt_global_empls_is_active = true.
          infotype_framework_is_active = true.
          perid_infotype_is_active     = true.
        ELSE.
          infotype_framework_is_active = false.
          perid_infotype_is_active     = false.
        ENDIF.
    ENDMETHOD.
    Thus, you need to analyze how attribute CE_IS_ACTIVE, GLOBAL_PAYROLL_IS_ACTIVE and MNGMT_GLOBAL_EMPLS_IS_ACTIVE are filled in the CLASS_CONSTRUCTOR.
    For sure you will find customizing settings that are responsible for this.
    Regards
      Uwe

  • How to define a schema for fixed length consisting of multiple records of different types having header detail and footer at positions 22 and 23 namely having 10 for header 20 for detail and 30 for footer

    how to define a schema for fixed length consisting of multiple records of different types having header detail and footer at positions 22 and 23 namely having 10 for header ,20 for detail and 30 for footer.
    here is the sample file
    DDWTYBILL13092502572 1000000112\\NHLSFS\ORACLE\ORACLE\BILLING\VERIFY\            2013/09/25 01:19:08 BILLEND     
    DDWTYBILL13092502572 2000000212PRIVATE             PRIVATE             STY5572142     010700         INV                              12STYD000789                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNM    DIMPHANA,CN,CELESTE NERINA                                                                                                        09-JAN-1964                              TYG       A2        DR DU PREEZ                                                                                         5602181             63301345       TB731543                                           Suspect TB ?CA, (L) EMPIEEM                                           Ward A2                                           TYGERBERG HOSPITAL                                                                                  Z03.0                                                       Z03.9                                                          05-AUG-201305-AUG-201324-SEP-2013FEND    113.60
    DDWTYBILL13092502572 2000000312PRIVATE             PRIVATE             STY5572149     010700         INV                              12STYD000789                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNM    DIMPHANA,CN,CELESTE NERINA                                                                                                        09-JAN-1964                              TYG       A2        DR DU PREEZ                                                                                         5602181             63301345       TB731548                                           Empyema BPF                                                           Ward A2                                           TYGERBERG HOSPITAL                                                                                  Z03.9                                                       Z03.9                                                          05-AUG-201305-AUG-201324-SEP-2013FEND    113.60
    DDWTYBILL13092502572 2000000412PRIVATE             PRIVATE             STY5572351     010700         INV                              12STYD000789                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNM    DIMPHANA,CN,CELESTE NERINA                                                                                                        09-JAN-1964                              TYG       A2        DR DU PREEZ                                                                                         5602181             63301345       TB731584                                           Suspect TB ?EMPIEEM, ?CA                                              Ward A2                                           TYGERBERG HOSPITAL                                                                                  Z03.0                                                       Z03.9                                                          05-AUG-201305-AUG-201324-SEP-2013FEND    113.60
    DDWTYBILL13092502572 2000000512PRIVATE             PRIVATE             STY5572352     010700         INV                              12STYD000789                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNM    DIMPHANA,CN,CELESTE NERINA                                                                                                        09-JAN-1964                              TYG       A2        DR DU PREEZ                                                                                         5602181             63301345       TB731585                                           Suspect TB ?EMPIEEM, ?CA                                              Ward A2                                           TYGERBERG HOSPITAL                                                                                  Z03.0                                                       Z03.9                                                          05-AUG-201305-AUG-201324-SEP-2013FEND    113.60
    DDWTYBILL13092502572 2000000612MAJOR               MAJOR               STY5577530     010700         INV                              12ZTYG000009                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNS    ZOZI,S,SIYAMBONGA                                                                                                                 27-MAR-2010                              TYG       D3        DR MAHOMED                                                                                          5602181             113799662      TB731663                                           Lymphadenitis                                                         Ward D3                                           TYGERBERG HOSPITAL                                                                                  I88.9                                                       Z03.9                                                       H1 07-AUG-201307-AUG-201324-SEP-2013MEND     58.52
    DDWTYBILL13092502572 2000000712MAJOR               MAJOR               STY5577537     010700         INV                              12ZTYG000009                  06-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNS    DLAMINI,N,NTLANTLA                                                                                                                09-OCT-1976                              TYG       F1        DR WZESE                                                                                            5602181             135524676      TB731666                                           Suspect TB                                                            Ward F1                                           TYGERBERG HOSPITAL                                                                                  Z03.0                                                       Z03.9                                                       H1 07-AUG-201314-AUG-201324-SEP-2013MEND     58.52
    DDWTYBILL13092502572 30003034120000003032END

    You can create an nXSD using Native Format Builder and use lookAhead attribute to read values at specific position and use that as the choice. You can find an example here
    http://docs.oracle.com/cd/E11036_01/integrate.1013/b28994/nfb.htm#BGBBAJFD

  • Data source value for data source reportData was null

    hi i'm using struts 2 and jasperreports my problem is
    it generate a pdf file with labels but no data in it..
    and when i try to look at the logs of my sun application server
    it says Data source value for datasource reportData was null.
    reportData is an ArrayList of Personnel object.
    here is my code..
    public class EIS_HR_004_JASPER extends eisSupport {
        private String reportId;
        private String dateStart = null;
        private String dateEnd = null;
        private String pdfFile;
        private final static String _REPORT_FOLDER = "EIS_HR_003";
        private Report thisReport;
        private String dateRange;
        private ArrayList<Personnel> reportData;
        public String execute(ActionMapping mapping,ActionForm form,
                HttpServletRequest request, HttpServletResponse response)
                throws Exception {       
            ReportBean reportBean = new ReportBean();
            setThisReport(reportBean.getReport(getReportId()));         
            reportData=new ArrayList<Personnel>();
            Personnel p1=new Personnel();
            p1.setSurname("Dela Cruz");
            p1.setFirstname("Juan");
            p1.setExamcode("CSC111");
            p1.setExamdate("January 1,2003");
            Personnel p2=new Personnel();
            p2.setSurname("Cruz");
            p2.setFirstname("Miguel");
            p2.setExamcode("CSC222");
            p2.setExamdate("December 2,2003");
            reportData.add(p1);
            reportData.add(p2);
         try {
              JasperCompileManager.compileReportToFile(
                        "apps/reports/templates/hr004.jrxml",
                        "apps/reports/templates/hr004.jasper");
         } catch (Exception e) {
              e.printStackTrace();
              return ERROR;
             return SUCCESS;
        public ArrayList<Personnel> getReportData() {
           // setReportData();
            return reportData;
        here is part of my struts.xml
    <action name="EIS-HR-004_JASPER" class="eis.report.EIS_HR_004_JASPER">
                <result name="error">/apps/reports/ReportNotFound.jsp</result>
                <result name="success" type="jasper">
                    <param name="location">apps/reports/templates/hr004.jasper</param>
                    <param name="dataSource">reportData</param>
                    <param name="format">PDF</param>
                </result>
            </action> i dont know why it doesnt retrieved the data from the ArrayList?
    please help me..Thanks in advance.

    Hi,
    Looking at the code, it seems you are compiling a JRXML and that is all.
    Instead, you should fill it with data and then export the result to PDF.
    No wonder you don't see any result.
    You need to learn more about how JasperReports work. For a start, I can tell you that you could compile JRXML files as part of the application build process using an Ant task, and not dynamically, like you did. But no matter how you compile the report template, you actually need to fill it with data, using the JasperFillManager and then export it to PDF using the JasperExportManager.
    You can see all this in our samples in the /demo/samples folder that is part of our project distribution package. There is even a sample Web application in the /demo/samples/webapp folder.
    I hope this helps.
    Teodor

  • How to select XML value for a namespace when multiple namespaces

    Hi,
    I'm a beginner with this, but I'm doing well with your help from this forum in a recent post selecting out all the detail from my xml
    out into my oracle relational tables. Stumped, though, on how to select a value for xml tag value referenced by a defined namespace.
    Version, XML, what I want to select, and attempted sql is below. Thanks in advance!
    select * from V$VERSION
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
    PL/SQL Release 11.2.0.2.0 - Production
    CORE 11.2.0.2.0 Production
    TNS for Solaris: Version 11.2.0.2.0 - Production
    NLSRTL Version 11.2.0.2.0 - Production
    drop table TRANSCRIPT;
    create table TRANSCRIPT (
    CONTENT xmltype
    <?xml version="1.0" encoding="UTF-8"?>
    <arb:AcademicRecordBatch xmlns:arb="urn:org:pesc:message:AcademicRecordBatch:v1.0.0">
      <hst:HighSchoolTranscript xmlns:hst="urn:org:pesc:message:HighSchoolTranscript:v1.0.0" xmlns:ct="http://ct.transcriptcenter.com">
       <TransmissionData>
          <DocumentID>2013-01-02T09:06:15|D123456789</DocumentID>
       </TransmissionData>
       <Student>
                <Person>
                    <Name>
                        <FirstName>John</FirstName>
                        <LastName>Doe</LastName>                   
                    </Name>
                </Person>
                <AcademicRecord> 
                    <AcademicSession>
                        <Course>
                            <CourseTitle>KEYBOARD 101</CourseTitle>
                            <UserDefinedExtensions>
                              <ct:TranscriptExtensions>
                                 <NCESCode>01001E010456</NCESCode>
                                 <CourseRigor>1</CourseRigor>
                              </ct:TranscriptExtensions>
                          </UserDefinedExtensions>
                        </Course>
                        <Course>
                            <CourseTitle>SCIENCE 101</CourseTitle>
                            <UserDefinedExtensions>
                              <ct:TranscriptExtensions>
                                 <NCESCode>01001E010457</NCESCode>
                                 <CourseRigor>2</CourseRigor>
                              </ct:TranscriptExtensions>
                          </UserDefinedExtensions>                       
                        </Course>
                    </AcademicSession>
                    <AcademicSession>
                        <Course>
                            <CourseTitle>MATH 201</CourseTitle>
                            <UserDefinedExtensions>
                              <ct:TranscriptExtensions>
                                 <NCESCode>01001E010458</NCESCode>
                                 <CourseRigor>2</CourseRigor>
                              </ct:TranscriptExtensions>
                          </UserDefinedExtensions>                                 
                        </Course>
                    </AcademicSession>
             </AcademicRecord>
       </Student>
      </hst:HighSchoolTranscript>
    </arb:AcademicRecordBatch>I want to be able to select the NESCODE associated to each coursetitle (01001E010456, 01001E010457, 01001E010458), with NESCode defined by namespace, but getting out NULL.
    DOCUMENTID     LASTNAME     COURSETITLE     NCESCODE
    2013-01-02T09:06:15|D123456789     Doe     KEYBOARD 101     
    2013-01-02T09:06:15|D123456789     Doe     SCIENCE 101     
    2013-01-02T09:06:15|D123456789     Doe     MATH 201     
    My SQL is below. You'll see where I commented out a couple failed alternatives too. Thanks again in advance for any guidance.
       select x0.DocumentID
             ,x1.LastName
             , x3.CourseTitle
             ,x3.NCESCode
      from TRANSCRIPT t
         , xmltable(                                                                                   
             xmlnamespaces(
               'urn:org:pesc:message:AcademicRecordBatch:v1.0.0' as "ns0"
             , 'urn:org:pesc:message:HighSchoolTranscript:v1.0.0' as "ns1"
            --, 'http://ct.transcriptcenter.com'                               as "ns1b" 
          , '/ns0:AcademicRecordBatch/ns1:HighSchoolTranscript' 
            passing t.content
            columns DocumentID       varchar2(40) path 'TransmissionData/DocumentID'
                       , Student xmltype      path 'Student'     
          ) x0
       , xmltable(
            '/Student'
            passing x0.Student
            columns LastName varchar2(20) path 'Person/Name/LastName'                       
                        ,AcademicRecord   xmltype      path 'AcademicRecord' 
          ) x1          
       , xmltable(
            '/AcademicRecord/AcademicSession' 
            passing x1.AcademicRecord
            columns GradeLevel varchar2(20) path 'StudentLevel/StudentLevelCode'
                  , Courses      xmltype      path 'Course'
          ) x2
              , xmltable(
              xmlnamespaces('http://ct.transcriptcenter.com'  as "ns2b")
              , '/Course'
            passing x2.Courses
            columns CourseTitle varchar2(40) path 'CourseTitle'
                         ,NCESCode  varchar2(20) path 'UserDefinedExtensions/ns2b:ct/NCESCode'
                         --,NCESCode  varchar2(20) path 'UserDefinedExtensions/ns2b:ct/TranscriptExtensions/NCESCode'                     
          ) x3
               

    <<I'm assuming there is more to your XML than you showed, since
    StudentLevel/StudentLevelCode
    is not in the XML, but is in your query. >>
    Yes, to simplify, I left out some of the additional XML data, which is typically present, sorry for any confusion. I should have removed those references to that data in my example which was failing to retrieve the NCESCode data which was denoted by that namespace.
    Thank you very much! Your correction worked. I was not understanding until your correction how to properly reference in the XPATH for that namespace value. I'm a newbie at this, and this is my second post. But I've been able to populate quite a few relational tables and that was the first of several namespace tags I will have to deal with next, and with that help, I should be good with that syntax now.
    Thanks again for your help on this.

  • Define Fixed Values for Texts

    Hello,
    Using customizing for text schema, it is possible to define fixed values for texts from SRM document.
    Nevertheless, when you define fixed values for a transaction type, field "Fixed Value for a Text" is a CHAR30 data type.
    Is there a way to add a customer field in order to use it in the drop-down list instead of the standard one ?
    Our aim is to have at header PO level a specific document text and to transmit it to R/3, but those texts can go to CHAR80.
    Previously, i tried to add my specific document text (using a specific search-help) into the text area (in this case, i don't have any fixed values) which is CONTAINER_LONGTEXT.
    But this field is an implementation class, and i don't know how to populate this area.
    Any suggestions are welcome.
    Regards.
    Laurent.

    Hi,
    I tried to update PO for its longtext (with standard function module) using obtained value with my search-help, but i did not succeed yet.
    Any ideas ?
    Regards.
    Laurent Burtaire

  • Define Default Values for Doc type..

    Hi All.
    I set a default value of "ME21N" TO "S21" at Define Default Values for Document Type.
    But, default document type is not "S21" but "NB" in ME21N
    ( system ver. 710)
    Let me know how to correct it..
    Thank you in advance.
    regards..
    nam

    Hi,
    Could u please confirm whether have u created the document type
    in
    IMG...>MM.....>Purchasing.....>Purchase order...>Define Document Types.
    if not please do it.
    and then create the pO.
    I think it will work
    Regards
    Aasif

  • How to define the texts for UI element Dropdownlistbykey?

    Hi everyone,
      I don't know how to define the texts for Dropdownlistbykey. It seems that Dropdownlistbykey has an attribute "selected key", but where can I bind the texts I want to display when user clicks the downwards
    arrow?
    Thanks in advance.

    hi,
    you can use this code :
    method WDDOINIT .
      DATA : node_info TYPE REF TO if_wd_context_node_info,
             value1 TYPE wdy_key_value,
             set TYPE wdy_key_value_table,
             k1 type string value 'M',
             v1 type string value 'MAGO',
             k2 type string value 'S',
             v2 type string value 'Saurav'.
      value1-key = k1.
      value1-value = v1.
      APPEND value1 to set.
      value1-key = k2.
      value1-value = v2.
       APPEND value1 to set.
    node_info = wd_context->get_node_info( ).
    node_info = node_info->get_child_node('FOR_DROP').
    node_info->set_attribute_value_set( name = 'DROP_KEY'   value_set = set ).
    I hope it helps.
    Thanx.

  • How to set default values for boolean columns

    I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
    I've tried to set default value at column level:
    <Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
    Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
    <Default>TRUE</Default>
    </Field>
    and at content type level:
    <FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
    But in any case, when i create a new item with this content type, default value is applied.
    Can anyone tell how to set default values for boolean columns?
    Thanks in advance,
    Regards,
    Sergio

    In the field definition you can set
    <Default>1</Default>
    or
    <Default>0</Default>
    How to set the default value Null?

  • A^b = n ,How to get the value for a ?

    a^b = n ===> n = Math.pow(a,b)
    How to get the value for a ?
    dose Java have API to get the value for a ?
    Thanks for help~~~

    a^b = n
    =>
    a = n^(1/b)
    So,
    a = Math.pow(n,1.0/b)

  • How to insert / Update value for PFAKT in BP Relationship

    Hi Friends / Experts,
    How to insert the value for PFAKT ( Function value ) in BP Relationship in BP tcode , in SAP CRM.
    I have tried it but it BAPI_BUPR_CONTP_CREATE. But I need it with BAPI_BUPR_RELATIONSHIP_CREATE Function Module.
    Please help me out.
    Any Enhancement points in BAPI_BUPR_RELATIONSHIP_CREATE or any user exists. Please let me know.
    Regards,
    KMF.

    you can also acheive this using MERGE( available in sql 2008 and above).
    also, you are referring to DTS. DTS is legacy solution now..are you using sql 2000,  you can use ssis, if you want and it available in sql 2005. as said, there are multiple ways you can do this.. it find the below one a easy solution, since your are
    talking about only one table.. 
    try this example..
    create table test1(sno int primary key,sname varchar(20),scity varchar(20))
    go
    create table test2(sno int primary key,sname varchar(20),scity varchar(20))
    go
    insert into test1
    values(1,'stan','atlanta'),(2,'william','newyork')
    go
    insert into test2
    values(1,'robin','orlando')
    go
    --set this in you sql job and let it run for every half an hour
    MERGE test2 t2
    USING test1 t1
    ON t2.sno = t1.sno
    WHEN MATCHED THEN
    UPDATE
    SET t2.sname = t1.sname,t2.scity=t1.scity
    WHEN NOT MATCHED by target THEN
    Insert(sno,sname,scity)
    values (sno,sname,scity);
    go
    --check this table and clean up
    select * from test2
    go
    drop table test1
    go
    drop table test2
    Hope it Helps!!

  • How to calculate acquisition value for specified day

    Hi,
    in my z program I have a problem how to calculate acquisition value for my asset for specified day.
    Example:
    I have asset created 8.7.2008 with TTYPE 104 (External asset acquisition) with value 5950.
    30.11.2008 there is another TTYPE 272 (Retirement of current-yr acquis., w/o revenue) with value 950.
    So BEFORE 30.11.2008 acquisition value is 5950. After is 5000. Is there any function module (or something else) in SAP system where I can send asset number and date a it return to me acquisition value for that day?
    Many thanks for any answer!

    Hi,
    your suggestion means that I have to compute acquisition value by myself (sum all TTYPE 1** - sum all TTYPE 2**). So SAP does't provide such functionality (LDB ADA have it, because it can compute acquisitiob value for specific day)?
    Mant thanks for answer

  • How to define Substitution rule for Businee area

    Hi experts,
    Could you please guide me to define substitution rule for Business are.
    Below is the requiremnt :
    I want to assign different business area for this cost centre.
    While posting document in FB01, we are entering cost centre in line itme. Businee area is picking from cost centre master.
    Example : Cost centre 11310 and businee area Y020.
    Businee area Y020 is picking from cost centre 11310 while posting document.
    I want to assign different business area for this cost centre.
    For that I want to define substitution rule.
    I have defined substitution rule and activated in comapany code but it is not working. Please guide me how to define Substitution rule for the same.
    I have defined prerequisit as Comapny code = 2053 and Cost centre =11310 and transaction code = FB01 then
    Substitute business area with Y045.
    It is not working .
    Please guide me where I did mistake and how to rectify the same.
    Thanks in advance for your quick response and points will also assign for helpfull answer.
    Regards,
    Amar

    Hi Paul,
    Thaks for your reply.
    Yes, you are correct. SAP is changing this back to BA from Cost centre.
    Why can't we use Substitition for the above issue.
    Then what is solution for my issue.Please suggest any alternative solution.
    Thanks in advance for your help.
    Regards,
    Amar.

  • How to define Approval Hirearchy for Fixed Assets?

    Hello All,
    Couls someone please tell me How to define Approval Hirearchy for Fixed Assets which should be different as compared to normal item purchase.Reply me ASAP
    Regards
    Aditya

    Hi,
    The AP invoice approval used AME rules for finding the approver. You can base you AME rules on virutally anything.
    In this particular case, you can base your AME rules on one of the followings:
    1. If any of the Distribution Accounts contain Fixed Assets natural account
    2. You can define a separate document category which should be used with invoices for FA Purchase and use the category in AME rules to find approver
    3. You can have a DFF at the Invoice Header level to indicate that this is a fixed asset purchase invoice and have this DFF to be used in AME rules.
    Gajendra

  • How to assign a value for Unit of measure (like PC, KG...) in ABAP program?

    Hi,
        How to assign a value for Unit of measure (like PC, KG...) in ABAP program?
        I want to assign PC in a field to execute the program, like wa-ENTRY_UOM = 'pc'.
        But the system returen a message that "Unit of measure  is not convertible to stockkeeping unit PC"
        Could anyone tell me how to assign the value??
        Thanks!

    hi,
    first convert the quantity in the same unit  ( like in you case ST to PC )  by using FM :    MD_CONVERT_MATERIAL_UNIT
    CALL FUNCTION 'MD_CONVERT_MATERIAL_UNIT'
        EXPORTING
          i_matnr                    = matnr
          i_in_me                    = entry_uom
          i_out_me                   = out_uom
          i_menge                    = quantity
       IMPORTING
         E_MENGE                     = fp_l_v_quant
       EXCEPTIONS
         ERROR_IN_APPLICATION       = 1
         ERROR                      = 2
         OTHERS                     = 3.
      IF sy-subrc <> 0.
              give error message here
       ENDIF.
    bcoz in ur program somewhere the quantities etc are compared and there units may be different... so that is why it is showing such error.  so just convert convert the quantity in the same unit  .
    regards
    rahul
    Edited by: RAHUL SHARMA on Jun 17, 2009 9:31 AM

Maybe you are looking for

  • Can my mid 2011 macbook air be upgraded to wifi 802.11ac?

    Can my mid 2011 macbook air be upgraded to wifi 802.11ac? I am considering replacing my 802.11n router with the 802.11ac time capsule. Will this effect my download speed on my 802.11n macbook air (mid 2011)? can it be upgraded?

  • How do I use contact groups to easily dial friends and fam

    Hi I set up groups (family/friends) in my address book MAINLY NOT to have to filter through every "Elizabeth" in my phone just to call my sister!  Now, although I have a group of family and friends set up, I cant figure out how to utilize them (the g

  • Stored procedure : how to call SP in sender JDBC adapter for mysql

    HI friends , we have JDBC---->XI-- >SAP  scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call  SP in sender JDBC adapter for mysql . Thanks mojib

  • BPC 7.5 upgrade process - Doubts

    Hi, Once we had the confirmation and approval to upgrade the system from SP00 to SP03 (on .NET server components), we noticed that some functional configurations had been made in the meantime. This new scenario where new things had been done from a f

  • Question about lables and ratings.

    Is there a way to be able to see color labels and star ratings applied to my images in Lightroom (V 1.1) when I look at them in Bridge? I'm on a Mac and using CS3 for Bridge and Photoshop.