How to define Substitution rule for Businee area

Hi experts,
Could you please guide me to define substitution rule for Business are.
Below is the requiremnt :
I want to assign different business area for this cost centre.
While posting document in FB01, we are entering cost centre in line itme. Businee area is picking from cost centre master.
Example : Cost centre 11310 and businee area Y020.
Businee area Y020 is picking from cost centre 11310 while posting document.
I want to assign different business area for this cost centre.
For that I want to define substitution rule.
I have defined substitution rule and activated in comapany code but it is not working. Please guide me how to define Substitution rule for the same.
I have defined prerequisit as Comapny code = 2053 and Cost centre =11310 and transaction code = FB01 then
Substitute business area with Y045.
It is not working .
Please guide me where I did mistake and how to rectify the same.
Thanks in advance for your quick response and points will also assign for helpfull answer.
Regards,
Amar

Hi Paul,
Thaks for your reply.
Yes, you are correct. SAP is changing this back to BA from Cost centre.
Why can't we use Substitition for the above issue.
Then what is solution for my issue.Please suggest any alternative solution.
Thanks in advance for your help.
Regards,
Amar.

Similar Messages

Substitution rule for Business area in F-02

Dear SAP gurus,
The client has 2 plants at different locations. 2 plants are created as business areas.
Our requirement is, when users at bus area 1 are posting expenditure in f-02, the field business area should be automatically filled with '1000'(bus area 1). the users need not manually update the field Business area since they only operate and post in that location. Same functionality is needed at plant 2 also.
I came to know that this requirement can be fulfilled with Substitutions in SAP.
Can anybody please tell me how to write a substitution rule for the above requirement. Any other ideas are also welcome.
Please help me in this issue.
Thank you very much in advance.
Regards,
Vishnu
VST-ITPW

Hello,
You have to do two things.
1. First you write the substitution in GGB1
2. Assign the substituion to your comany code OBBH
In OBBH, write substituion at line item level of the document.
If the plant = A
Substitute business area with A
Check if there are any standard substitutions are available in your system
just for your reference.
Hope this resolves your problem.
Regards,
Ravi

FI substitution rule for Business area on New GL view(FAGLFLEXA)

Hi Gurus,
Need a your expertise guidance.
We have a requirement to substitute u2018Business areau2019 field on GL view(table u2013 FAGLFLEXA) for all FI postings.. I am trying to achieve this by OBBH substitution rule using user exit, Is this possible anyway??
I have already worked with my developer, but he is not getting any clue to write a logic in the user exits available in OBBH.. can anyone please guide us..
Actual requirement is to update u2018Business areau2019 field on all FI postings at new GL view for some of the company codes (not all), I am not sure if we can achieve it by activating document splitting by business area field.. we have document splitting active already by profit center and segmentu2026
Please guide me..
Many thanks in advance..
Prasad

HI pampana,
If you add the Business area is document splitting char's with Mandatory check box
then reach and very line will update the business area value in Doc splitting.
But you allready have profit center as a doc splitting char's
If you want to Business area is new doc splitting char's then you need
go for NewGL migration.
Please refer the NewGL migration scenario 6, 7 for your case.
please check the link
http://wiki.sdn.sap.com/wiki/x/JghNCw (NewGL Migration Secnarios)
Regards
Madhu M

Substitution Rule for Assessment Cycle

Hii All,
Can anybody suggest how do i define substitution rule for Assessment Cycle??
Reg
Umesh

I have created a assessment cycle thru KSU1 where i assigned SKF key , Thru SKF key i have to define allocation numbers with receiver cost centers but before that i have to set substitution rule for cycle.
All the common expenses booked under one common cost center
For eg. Expensed booked in GL series 3 - Common Cost Center
in Cycle - Assesment CEle start with 9
In FI - Common Exp GL start with 8
Above Example , when i run the cycle expenses will be allocated in 8 series with receivers cost center
Can ny1 suggest me how to do the process,how to define the rule
REg
Umesh

Substitution rule for STO - changing business area.

Hello Experts,
We are transferring stock from one plant to another plant. Each plant is business area. We are doing stock transfer at some profit element of Rs. 250. Transfer is done from Business Area D002 to Business Area D001.
When we do outbound delivery, it posts following entry:
Stock A/c... Dr (Business Area D001) Rs.1250
To Stock A/c (Business Area D002) Rs.1000
To Profit on transfer (Business Area D001) Rs.250
However, I want to substitute business area for third line. I want that, business area D001 should be replaced with business area D002. However, there is some substitution rule for the same. Please tell me, how this substitution can be done.
Please help
Deepak

What is your price control for your material for both plant ?
What is the process for your stock transfer ?
However, as of my knowledge, you can't achieve this accounting entry in standard.
See, if you are using MAP for material for both plant, then accounting entry will be
Stock A/C debit for plant D001
Stock A/C credit for plant D002.
If you are using standard price for material, then accounting entry will be
Stock A/C debit for plant D001
Stock A/C credit for plant D002
Price diff account credit or debit (as per the price difference for material price for both plant).

Trigger substitution rule for a background job

Hi all,
I ve written a subroutine in Substitution rules for FI in GGB1 tcode for F110 transaction to replace the section code (bseg-secco) while posting a fi document.
but the substitution rule is not getting triggered as F110 runs a background job to post the document...
The substitution is active and the activation level is active all the time.
Could u please suggest how to get it triggered for a background job...

Measuring External Processes
Use
The runtime analysis allows you to switch into work processes that are already running and to measure the runtime of dialogs running in them as though they were running in the current session. You can have up to ten external sessions, which may be of any type for example, dialog, update, or spool. This runtime analysis variant is ideal for monitoring long-running background jobs.
Filename and Directory
If you do not want to use the default filename and directory to store files, you can change them using the profile parameter abap/atrapath. If the profile parameter does not contain an entry at all, an error occurs when you start the runtime analysis.

Screen layout rules for depreciation areas

Hi Experts,
One quick question. Where do we see screeen layout rules for Asset depreciation areas. SPRO path or transaction code to view this would be helpful.
Regards,
Santosh

Hi Ragini
Thanks for reply. It seems transaction code OA78 is wrong. It says transaction code OA78 does not exist. I am working on SAP R/3 4.7 version.
I know that we can define screen layouts for depreciation areas through transaction AO21.
However I would like to know how can we find out screen layout assigned to a particular asset or particular asset class. In transaction OAOA we can see screen layout rule assigned to asset class, but not screen layout for depreciation areas for that asset class.
Any pointers on this would be highly helpful.
Regards,
Santosh

Define selection rule for Day type

Dear Experts
As I want to "Define selection rule" for "day types" in Time Management-> work schedule-> Day types-> define selection rule, the third and 4th columns are default weekdays of SAP, But weekend is different in our system. How can we handle this subject? Can we change these columns to our needs? How?
For example we want to define that friday is not working day in our company and it should be payed, is there any other option?
Thank you all,...

Hi friend,
Check:
Time Management -> Work Schedules -> Period Work Schedules -> Define Period Work Schedules
btw, you should check factory Holiday calendar (Tcode: SCAL) and generate Work schedule for year.
IMG: Time Management -> Work Schedules -> Work Schedule Rules and Work Schedules -> Generate Work Schedules in Batch
Regard,
Michael.

How to define a Value for an Attribute of an Class

Hi,
How to define a Value for an Attribute of a Class ...
( I need to change the value of an Attribute of a class in standard program ....
Ex...
   cl_hrce_masterswitches=>infotype_framework_is_active
Here infotype_framework_is_active is the attribute .. its value in standard program is 'X'... Now i need to change it as ' '.
How to define it and set value as ' '.

Hello Surendar
The static attribute INFOTYPE_FRAMEWORK_IS_ACTIVE is read-only and there is not SETTER method to manipulate its value.
However, the attribute is filled in the CLASS_CONSTRUCTOR:
METHOD class_constructor.
    IF ce_is_active                 = true OR
       global_payroll_is_active     = true OR
       mngmt_global_empls_is_active = true.
      infotype_framework_is_active = true.
      perid_infotype_is_active     = true.
    ELSE.
      infotype_framework_is_active = false.
      perid_infotype_is_active     = false.
    ENDIF.
ENDMETHOD.
Thus, you need to analyze how attribute CE_IS_ACTIVE, GLOBAL_PAYROLL_IS_ACTIVE and MNGMT_GLOBAL_EMPLS_IS_ACTIVE are filled in the CLASS_CONSTRUCTOR.
For sure you will find customizing settings that are responsible for this.
Regards
Uwe

Wnat to maintain Substitution rule for VF60 tcode.

Hi All,
   I wanted to know that how do i define substitution rulr for FB60 tcode
   after enetr the data of costcenter. It would be trigered after ost center in the
   line item. does any one knows abt the same and how do we configured this
one. I copied standard SAP program 'RGGBS001' to maintain this suitation.
does any one know abt the same please answer ASAP.. it seems to be urgent.
thx
rao..

Transaction Code - FB60                     Enter Incoming Invoices
Exit Name           Description
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)
F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
FEDI0001            Function Exits for EDI in FI
No of Exits:         14
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Steps to create substitution rule for field BSEG-RECID

MIRO generates FI document. FI document has BSEG-RECID field. I need to apply substitution for BSEG-RECID depending on the value of the RSEG-GEBER field in MIRO. The substitution must be activated only if account to be booked is PL account in FI and derived MM document based on ZNPP PO type.
Field values are as follows:
RSEG-GEBER     BSEG-RECID
No value                          No value
N                              N
D                              D
A                              A
Could anyone please let me know the steps to create the above substitution rule for the FI document
Thank You

Hi,
You can do it as below:
Prerequisite : Select the document type for which you want check, here you have to select the BKPF-BLART = " " (Give the document type for the MIRO)
Substitution: Use the User exit with the logic as you said.
If you want you can use the user exit in both PREREQ & SUBSTITUTION. It will be applicable in your case
VVR

How to set Legislation rule for Enhanced Retro

how to set Legislation rule for Enhanced Retro
How can i setup Enhanced Retro for Global HR International.
Iam implementing HR/Payroll on latest 12i. I am using HR International.
when i execute the following query , there is no records
select * from pay_legislation_rules
where rule_type like '%ADVANCED%RETRO%'
and legislation_code = 'IQ'
I have created events, event groups, enable dynamic triggers for my business group and legislation(IQ) and enter the corresponding event group and retro element in the Element screen(retro component).
And i update one allowance in the back period , and I found one row has been inserted in pay_process_events table. But i am not able to run enhanced Retro Notification report and not able to find any Enhanced Retro concurrent request.
Any one have any idea?
thanks,

There are no specific concurrent programs for Enhanced/Advanced retropay. The old ones still do, and derive under the hood the method of retropay.
I do not recall by hard the setting to activate enhanced retro (but it is a legislation rule), but it should show already in the element type screen. If you have the retro tab in the screen, and first you have to specify the method (Adjustment, ...) before specifying the retro element type (and time span), then you know that enhanced retro is configured correctly.

Trigger a substitution rule for a background job

Hi all,
I ve written a subroutine in Substitution rules for FI in GGB1 tcode for F110 transaction to replace the section code (bseg-secco) while posting a fi document.
but the substitution rule is not getting triggered as F110 runs a background job to post the document...
Could u please suggest how to get it triggered for a background job...

Hi,
Please mainatain another substitution rule.
PREREQUISTE : 40(POSTING KEY )=SPARE PARTS(gl) and 50(posting key )=Inventory write off
Sustitute : Dtype = VA
Regards
jabeen

How to define Approval Hirearchy for Fixed Assets?

Hello All,
Couls someone please tell me How to define Approval Hirearchy for Fixed Assets which should be different as compared to normal item purchase.Reply me ASAP
Regards
Aditya

Hi,
The AP invoice approval used AME rules for finding the approver. You can base you AME rules on virutally anything.
In this particular case, you can base your AME rules on one of the followings:
1. If any of the Distribution Accounts contain Fixed Assets natural account
2. You can define a separate document category which should be used with invoices for FA Purchase and use the category in AME rules to find approver
3. You can have a DFF at the Invoice Header level to indicate that this is a fixed asset purchase invoice and have this DFF to be used in AME rules.
Gajendra

Asset substitution rules for mass changes

Dear all,
I create worklist in order to use substitution rule for mass change.
But when running transaction AR31 I have following error message:
No administrator found for the task
Message no. 5W141
I found transaction OAWF but what must I do with this?
Thanks for your help.
David

Hi David,
In sight of resolving the error 5W141 when running the workflow in AR31, maybe following information can help.
1- Transaction OAWF: check if the responsible users are assigned to the workflow tasks
Menu path: Basic Functions
                               Assign tasks to agent
                                         Correct worklist
                                                  Release worklist
                                                            Correct and release worklist
2- Then also check if the users are assigned to the workflow-tasks in the basis-component (transaction PFTC).
   Menu path: Task type: TS   - Standard task
                         Task     : corresponding task
Also check the minimum customizing for workflow: SWU3 => automatic customizing
Maybe the following SAP Notes help you in addition:
127931 Workflow for Mass change in FI-AA from 40B on
322526 Analysis for workflow problems
152871 Release Upgrade considerations for workflow
Best regards,
Brigitte

How to define Substitution rule for Businee area

Similar Messages

Maybe you are looking for