How to define the Previous Year Up to Date in BI 7?

Dear Expert,
I have got a BI 7 report requirement which needs to restricted a key figure with Previous Year Up to date.
I have found a time variable as Current Year Up to Date but not able to find the one for Previous Year Up to Date.
Is it possible that I can use it as below to restrict the Key Figure:
ZMP_CTYD (Current Year To Date) -1 (current year to date with the off set set to -1)?
If this is not a right way, could you let me know what is the correct way to restrict the Key Figure for Previous Year Up to Date?
Further information about the requirement:
I need to get the difference between current year up to date and previous year up to date for a key figure.
For example, to get the difference between the amout related to the preiod between Jan 1, 2008 and May 22, 2008 and the amount related to the period between Jan 1, 2007 and May 22, 2007.
Thank you very much!
Arthur

Hi,
YTD and CTD are different. One is all the way till year end and the other one is through current period. One way of doing this is to define your restricted KF definition. You can use the existing Variable that you already have and insert / restrict posting period from 'time dimension" 1 - 16, in most cases there are 16 period, or 1 to "latest period" depending on what you have. The key here is your " POSTING PERIOD" restriction
Hope this helps
assign points if helpful

Similar Messages

How to display the Previous years

Hi
CJE0 - 12KST1A costs:budget/actual/commt/rem.plan/assd
How to display the previous years budget in above mentioned report. at present the report is showing only cumulative value of previous years,2009 and 2010.....
My requirement is from 2005 to 2009 i want display the value in this report, please through some light on this.
Thanks
S.Murali

Hi
But i want check the previous years budget for some number of projects not one by one, because the number of project are more.
The above mentioned solution is for one by one i can check the pervious years budget. But my requirement is collective.
Thanks
S.Murali

How to calculate the previous year YTD balance in profit & loss statement

Dear all,
I would like to seek for advice on how to calculate the previous year YTD (Year to date) balance in profit & loss statement
For example, if I enter May 2009, the YTD value should be a sum up of value from Jan to May.
I have tried the current year YTD could be set in column selection dimension "financial period"
FACT PER( Code = YearFirst(@Per):@Per ) Order By PER.Code Descending
Then, I tried the previous year YTD in another column using
FACT PER( Code = YearFirst(@Per-12):@Per-12 ) Order By PER.Code Descending
But it failed -> Abnormally display three column, while the financial period I enter 200903 in parameter @Per
Would anyone kindly help me on that?
Regards,
Simon Chiu

Dear Jim,
Thanks for your reply.
However, the problems still cannot be solved.
My expected output is 1 column listing the YTD value from previous year.
I have tried two times using both the Code = YTD(@Per-12) and Code = YearFirst(@Per)-12:@Per respectively. However, the Excel display various column.
I am using Financial Period 200903. In the last three column, it display the data in Financial Period 200901, 200902 and 200903 respectively.
For the current year, the YTD is correct and show 1 column listing the sum of account in the Financial Period 200901, 200902 and 200903
Would you kindly advice the code setting and how to set? Also, how I can access the syntax builder?
Regards,
Simon Chiu

How to get the previous state of my data after issuing coomit method

How to get the previous state of some date after issuing commit method in entity bean (It should not use any offline storage )

>
Is there any way to get the state apart from using
offline storage ?As I said the caller keeps a copy in memory.
Naturally if it is no longer in memory then that is a problem.
>
and also what do you mean by auditlog?
You keep track of every change to the database by keeping the old data. There are three ways:
1. Each table has a version number/delete flag for each record. A record is never updated nor deleted. Instead a new record is created with a new version number and with the new data.
2. Each table has a duplicate table which has all of the same columns. When the first table is modified the old data is moved to the duplicate table.
3. A single table is used which has columns for 'table', 'field', 'data' and 'activity' (update, delete). When a change is made in any table then this table is updated. This is generally of limited useability due to the difficulty in recovering the data.
All of the above can have a user id, timestamp, and/or additional information which is relevant to the data being changed.
Note that ALL of this is persisted storage.
I am not sure what this really has to do with "offline storage" unless you are using that term to refer to backed up data which is not readily available.

How to populate the data or details of only the present year and the previous year with respect to the given RATNG?

Hi All,
I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
But the user wanted the data to be populated from only the present year and the previous year.
So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
PROPERTY PALETTE (ENQACMDTL block)
WHERE Clause
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
ENQNO
RATNG
2013900054
500KC2
2013900047
800KC4
2013520018
750KC6
2012900037
1000KC2
2012520109
500KC2
2012140019
750KC6
2011540036
500KC2
2011100030
1000KC2
2006100007
90KD8
2006750014
750KC6
2006900072
500KC2
The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
So when i query on the field 'RATNG',
Example:For RATNG=500KC2;
I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
Other than 500KC2 RATNG, no other RATNG must be displayed.
The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
Can You Help me or tell me what do i do for this?
Hope I'm clear with my question!!
If my question is not clear, let me know plz.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle forms 6i.

On key-exeqry you have to program. Delete all other trigger codings for checking your condition.
It dint work on key-exeqry.
I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
It did not display the message.
I have a 'PUSH-BUTTON:EXEC_QUERY.
For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
I added the following code:
if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
     message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
     raise form_trigger_failure;
else
     execute_query;
end if;
It is working fine and the message is being displayed.
But again I have a new problem and that is;
On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
How do i solve this?
Thank You Priyasagi.

How can I view my phone calendar for the previous year via my laptop?

I have to extract appointments for tax purposes and as this is my first smart phone (Samsung Galazy S3), I have no clue if this is possible or where to look? I thought when my phone did its back up it backed up everything...now I'm guessing just my contacts?
PLEASE HELP! TIME SENSITIVE!

Help is here, sbsue! Lets see if we can figure this out. Which calendar are you using? Is it the one on your S3? If so, did you back up by going in settings > accounts > Gmail accounts and sync? If the calendar was synced, log on google.com/calendar to view the previous year. Let us know which calendar was used so that we can better assist.
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

How to define the margins of a leaf in numbers 3.2

how to define the margins of a leaf in numbers 3.2
leaves appear without margin and not when moving from one sheet to another

Hi Ariel,
Numbers 3 does not show margins in normal (edit) view. Some help with layout:
Try Alignment Guides and Rulers as suggested here:
Print View workarounds
Use a layout guide:
Layout Guide for Numbers
If you previously had Numbers 2.3 (Numbers '09) it now lives in a folder called iWork '09 inside your Applications folder. It works just as well as it used to, and has a proper Print View.
Regards,
Ian.

Posting of depreciation in the previous year 2008

Hi All,
My client wants to capitalize some expencess in the previous year as assets, and they would like to caliculate depreciation from 01.01.2008 to 31.12.2008, finally they would like to carryforward those amounts to fiscal year 2009. My client is following jan-dec as fianancial year.
The assets involved are product licences and will need to be set up under asset numbers 99009 onwards. The amounts to be capitalised in 2008 are as follows:
XYZ u20AC12,456.89
As a full years depreciation of 10% of the total costs was taken for 2008, the capitalisation date should be set at 01/01/2008 to allow the figures to be calculated correctly and the correct npv to be carried forward to 2009.
Please let me know how to do this activity?
Thanks in advance
Regards,
Prasad

Go to TCode: OAAQ,
Open Fiscal Year 2008 and post the entries capitalization entry through JV in 2008. Now run AFAB for repeat run for 12th period.
Howeve above will change the closing balance of 2008 which may be audited and approved.

How to set the fiscal year period as default in variables

Hi All,
How to set the fiscal year period as default it shoud take previous period when the report is executed.
And also I need to do the same changes in reporting agent.
Could you please any one help me.
Points will be given.
Thanks!
Best regards,
Ajay.

Hi Ajay,
Create a customer exit variable.Write the code in the include 'zxrsru01' using system date.
take the system date from the system date variable and using that you can get the current fiscal year period.use this value and using string commands, you can get period.
subtract 1 from this value.Using this you can get the previous fiscal period..
Please let us know, if you need the coding part
Hope it helps
Thanks,
Teja

Depreciation - Post in the Previous Year

Hi,
I am trying to post the depreciation for Jan 2010, but the system is giving the error that I need to post in the preious year first.
However when i am trying to post the depreciation for the previous year, its giving the error that previous year is closed. Can anybody help me how to resolve this issue. Thanks.
Regards,
S.Sumana.

Hello Sumana,
I have encountered similar issue in one of my clients. What you need to do to remedy the situation is that you need to open the Asset fiscal year in OAAQ and then post depreciation month wise till the current year start. For posting depreciation you also need to open the old accounting period but if there were no asset postings in previuos years then you do not have that risk of anything getting posted in books(which are already closed) in those prior fiscal years. This was from books point of view you maintain status quo.
Close the previous asset years and posting years once you are done with depreciation posting for a particular year.
After you come upto date you can run the depreciation normally in current year.
Regards,
Vijay

User wants to see the previous year's W-2 forms, while he is accessing the present year W-2 form

Hi Folks ,
I need your expertise in resolving the issue,
Requirement: User wants to see the previous year’s W-2 forms, while he is accessing the present year W-2 form (2011, 2012 and 2013 years)
Need to get the information whether we could able to get the previous year’s W-2 forms using standard functionality? Or we should use the customize functionality
If we want to use the custom functionality , please let us know how to do it ?
Thanks and Regards ,
Deepak

you can use the Features UTREL and UTRES
Read complete configuration & guide document
W-2 Online User Guide - ERP Human Capital Management - SCN Wiki
Configuring Online W-2 - Online W-2 - SAP Library

NO ANSWER YET. How do I delete previous years from my Calendar?

I use the Calendar as a diary & have deetails from 2005. How do I delete previous years?
Solved!
Go to Solution.

I spent some time looking through my calendar and couldn't find any option/way to delete a whole year's entries and appointments. My suggestion is to make sure to constantly update your calendar as things occur that way you won't have to delete the events one by one. I could be wrong and there could be some special/hidden setting I don't know about to delete a whole year's entries.
C41vin Tirr311
O.O -_-
-Look through the posts before posting a new question.
-Kudo people who posted something you found helpful.

Giving error while creating a sales contact for the previous year (2008)

Hi Friends,
We are currently with SP12. When we try to create a sales contract for the previous year it is giving error like "Schedule line is for the item 100 cannot be after the order's latest delivery date".
i tried debugging and found that that there is a rule created for this (in SP12). I commented the rule and tried to create a contract but, again got an error "Error while saving". This error I can't catch while debugging.
I even didn't find where the schedule line date and header cancel dates are set so that I can change the dates manually.
If any one has any idea, kindly help me.
Best regards,
Swarna Seeta

Hi Wolfhard,
Thanks for the reply.
You are right and I have uncommented the line which assigns true to the return value and the contract got saved now.
Thank you so much.
I just want to know whether commeting this rule effects any of the functionalities of the sales contract.
Best regards,
Swarna Seeta

'You can post in new year only after closing the previous year

Hello Experts,
I am also getting same error while executing depreciation run AFAB ''You can post in new year only after closing the previous year''.
I found one OSS Note 18800 and it is saying solution as below ...
At the first depreciation posting in the new fiscal year after a shortened fiscal year, the fiscal year variants must, in all cases, still be entered in asset customizing and in FI customizing for the affected company code. If necessary, all periods for the following fiscal year must be maintained with the variant of the shortened fiscal year.
Up to 2.2D the following correction must also be installed:
Please carry out the syntax check only in main program SAPLAFAR.
But in my case there is no shortended fiscal year.
Can I apply this OSS note correction instructions ?
Please suggest me.

Hi
I don't think so. Moreover that is applicable till 2.2D.
Moreover depreciation is to be run for all periods you have not run earlier. Please check upto which period dep run has happened. Thereafter close the fiscal years in order thro AJAB.
S Jayaram

How to get the current year??

Hi all,
How to get the current Year??

Hi,
Current Year & month are available in table MARV.
I hope this helps,
Regards
Raju Chitale

How to define the Previous Year Up to Date in BI 7?

Similar Messages

Maybe you are looking for