How to define the PSA in source system

hi ALL:
when i double click the datasource in the source system's datasource overview , there is an message of "Transfer method 'TRFC with PSA' is not supported by the source system ", and prompt me to define the PSA in source system , but i did not known how to define the PSA in source system .can any one tell me.
thanks a lot!

Hi
This becuase of RFC connection problem
go to rsa1>right click on youe sourcesytem>>check
if the connection is not good,contact your basis
cheers,
Swapna.G

Similar Messages

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

How to define the memory leak in stability test

Hi
Usually, we run our system with 70% CPU load for 72 hours for stability test (on solaris 10), because some plugin of our system is using mtmalloc, and we use prstat to monitor the memory of each plugin. But because of the complex memory usage of our application, we don't know when the application will use the Max memory, and because of the "mtmalloc", the memory showed by "prstat" will not released but continually increased.
So fro the test point of view, there is the risk of memory leak, but actually, there may be no memory leak, so my question is how to define the memory leak in such condition.

kevin wrote:
Thank you for the input and all the info.
isn't java heap the same as memory allocated to the java process in my weblogic
starup script ?The heap is sized by the -Xmx and -Xms parameters you pass on the java
command-line. The permanent generation is separate.
>
let me also download jprobe and try to run it and see what it gives me.
I'd start by running with -verbose:gc. I'd want to know whether you're
running out of heap or permgen space.
-- Rob
kevin
Rob Woollen <[email protected]> wrote:
Unfortunately memory leaks are not fun to track down even with tools.
I'd first suggest determining whether you're running out of space in
the
permanent area (where classes are loaded), or you've exhausted the java
help space.
I'd start by adding -verbose:gc. Look at the gc messages right before
you hit the OutOfMemoryError. If there's plenty of space left, I'd
suspect you're running out of perm space. Search these newsgroups and
the web for MaxPermSize, and you should see plenty of info.
If you're running out of java heap, tools like jprobe and OptimizeIt
are
helpful. If you can tell me a little more about your application and
how you're testing it, I can offer some more tips.
-- Rob
kevin wrote:
Iam new to JAVA and weblogic. I have an application that runs out ofmemory time
and again.
please let me know how to pin point this problem and moreover, howto interpret
or understand that there is a problem. I have downloaded JPROFILE tool,but it
is very confusing to understand what is goin on in this tool.
If somebody can let me know how to interpret and understand the memoryleak, that
will be great !!!
thank you.

BI Idoc Type IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE

Hi all,
how can we solve the IDoc miss match in source system (ECC6).
Error :
BI Idoc Type ZSTC029 IS NOT THE SAME AS SOURCE SYSTEM IDOC TYPE ZSTC031
please provide me solutions..
Thanks in advance,
Venkatesh

Hi Venkatesh,
Check here.........
BW idoc type not same as source system idoc type
Thanks,
Vijay.

How can define the cost center (department) manager?

We are on 11.5.0.10
Financials implementation is done(GL,AP,AR,FA,IA)
In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
How can define the cost center (department) manager? Thanks.

I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
Hope this clarifies.
Vinit

How to recover a datasource from source system

Dear Experts,
i am trying to find a datasource(0PS_PRJTYPE_ATTR) in the source system. For some reason, I could only find the text one, not the attribute one. I checked in RSA5, RSA6 and RSA2. I couldn't find it.
What are the possible ways to recover the datasource, not sure if someone has deleted it.
Its really urgent, Please guide me.
Regards
Shanthi

Hi,
The same should be available in the source system (DEV), Surprising how / why the same is available in BW system.
I checked the SAP ERP source system to which I have an access and the same is not available in the source system not in the BW system
My sugession is to go for a generic datasource after identifying the table with the help of functional consultant.
Regards
Venkata Devaraj

How To Display the directories of a System.

How To Display the directories of a System.

Hmm I think you need to be more specific. Do you mean like this:
File f = new File("c:/");
File[] fs = f.list();That lists all the files in that folder, then you can use the method isDirectory to check it. Mind you, you would have to go though every folder.

How to take the data from sage system to sap r/3

hi expects,
how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?

hi rohit,
the data transfer can be done by using SOAP adapter
do chk this link
http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
thanx
Sampath

How to define the date format for this date string

2006-11-13 00:00:00.0
How to define the date format in control file for sqlldr. "yyyy-mm-dd hh24:mi:ss" or "yyyy-mm-dd hh24:mi:ss.FF1" does not work
thanks,

SQL> desc t
Name Null? Type
TS TIMESTAMP(6)
SQL> !cat t.ctl
load data
into table t
truncate
(ts timestamp "YYYY-MM-DD HH24:MI:SS.FF1")
SQL> !cat t.dat
2006-11-13 00:00:00.0
SQL> !sqlldr userid=scott/tiger control=t.ctl data=t.dat log=t.log
SQL*Loader: Release 10.2.0.3.0 - Production on Fri Sep 7 11:19:28 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 1
SQL> select * from t;
TS
13-NOV-06 12.00.00.000000 AMBest regards
Maxim

How to change the language of administrator system message in outlook

I wonder where is the option which changes the language of the text
related
to : Your mailbox is over its size limit send by the system
administrator ?
Some mailboxes get this message in French and other in
English ?
Is anyone can help me ?
I work with French Outlook 2003 sp2 and
English Exchange server 2000 sp3
I try to change the regional setting on the
server but nothing has changed.
Thanks,

Hi,
Please refer to this duplicate thread below:
http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to define the application parameter 'sap.xss.BaseConfigurationID'

Hello All,
I am developing a webdynpro ESS custom self service application. I have completed the development of the DC. But at the end when I am creating the application for the DC, I am not able to figure it out how to define the application parameter 'sap.xss.BaseConfigurationID' for the application. I have defined remaining all the parameters as specified in the following link.
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/43/3b95dab4ab1800e10000000a1553f6/content.htm]
Could any one please detail the process to define the parameter 'sap.xss.BaseConfigurationID' ?
Thanks a lot.
Regards,
Seshu.

Pick a representative file.
Get info. (Command-i)
There you will see a place "Open with" where you can select the application for that file.
Hit the "Change all..." button to do this for all files of this type.
charlie

How to define the default activity for an unbounded task flow?

In the new "Fusion Developer’s Guide for Oracle Application Development Framework 11g Release 1" documentation at the bottom of page 14-3 it states "An unbounded task flow .... contains a default activity, an activity designated as the first to run in the unbounded task flow, because an unbounded task flow does not have a single point of entry."
What I can't find is how to define the default activity in an unbounded task flow and where this is recorded? Can we set this via the task flow diagrammer, and which configuration file is it stored?
I note the first time I run the application with an unbounded task flow a dialog asks me which of the activities in the adfc-config.xml file to make the default, but I can't find where this is recorded.
Anybody have any ideas?
Thanks,
CM.

Chris,
In fact this information is nothing that belongs into the taskflow meta data because unbounded taskflow have more than one entry point and there is no notion of default. Its a tools setting (JDeveloper) we had before
Frank
Message was edited by:
Frank Nimphius

How to define the margins of a leaf in numbers 3.2

how to define the margins of a leaf in numbers 3.2
leaves appear without margin and not when moving from one sheet to another

Hi Ariel,
Numbers 3 does not show margins in normal (edit) view. Some help with layout:
Try Alignment Guides and Rulers as suggested here:
Print View workarounds
Use a layout guide:
Layout Guide for Numbers
If you previously had Numbers 2.3 (Numbers '09) it now lives in a folder called iWork '09 inside your Applications folder. It works just as well as it used to, and has a proper Print View.
Regards,
Ian.

How to define the dynamic navigation between two component in web ui

Hi All,
I have a requirement to create a new assignment block in accounts overview screen .
1.Created new view(Table view) in the BP_HEAD component.
2.Created new button on the table view toolbar .
3.If the user clicks the new button it should navigate to interaction log component(BT126H_CALL).
Please hekp me step 3 how to do .
I have checked planned activity assignment block in the account but is dynamic navigation.
Please explain me how to define the dynamic navigation between two components.
What is window delegate .
Thanks,
Venkyy

Hi ,
Kindly follow the link , this will be helpful for your issue :
http://wiki.sdn.sap.com/wiki/display/CRM/CRM-NavigatingtoyourcustomBSP+component

How to define the PSA in source system

Similar Messages

Maybe you are looking for