How to define the same font size,color for a text field label

hi all,
In my project i need to define the same font size & color for all the text field lables in the application.how do we can achieve this?
Thanks & regards,

...or you could use declarative components....
Not sure if skinning would prevent developers from overriding a look and feel??? hmmm not sure..
Grant

Similar Messages

  • How to export the same mb size of my cr2 files into jpg or tiff files in Lr?

    How to export the same mb size of my cr2 files into jpg or tiff files in Lr?
    Let's say my file size is 22mb, when i export the file to tiff or jpg, although Iam careful with the settings- file size, dimension, resolution, I can't manioukate how I want it.
    With jpg I tried everything, no matter what i do or change in files size or resoltion it remains the same size- 7mb as opposed to 22..
    Please advise,
    Best wishes,
    T

    I would noramlly opt for a tiff file, sending such a high res through the nest a nightmare
    This is probably just an improper use of terminology, but the resolution of a JPG, DNG and TIF should all be the same.
    The files differ in size, not resolution and not number of pixels.
    Jpg is not that bad, but its a pitty they have to be edited under a jpg format..
    Your raws are edited as raw. There is no loss of quality in the editing process. The files are then exported as JPG, which will cause a loss of quality. For just about any use, the loss of quality in the image when you export a JPG at quality level 12 is NOT noticeable. For many uses, exporting a JPG at a quality level of 8 will not be noticeable either, unless you intend to print the photo at a very large size. As twenty_one (not his real name) said, "Jpeg compression is fantastically effective".

  • How to change the default font size in X11?

    I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
    Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).  
    The default font size in the Xterm is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
    Is there a way to change the default font size "permanently" in XQuartz/X11 ??
    This may be a stupid question to ask in the developer forum but i cant really solve it.
    There's only config. file ~/.Xdefaults they have mentioned so far on Google but i really cant find it regarding to the directorty.
    Thank you very much in advance.

    You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
    It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
    Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
    I wish that Apple would invest more in discussion, and going towards making this more practical.

  • How to change the default font size in XQuartz?

    I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
    Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).   
    The default font size in the terminal is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
    Is there a way to change the default font size "permanently" in XQuartz/X11 ??
    This may be a stupid question to ask in the developer forum but i cant really solve it.
    There's only config. file ~/.Xdefault they have mentioned so far on Google but i really cant find it regarding to the directorty.
    Thank you very much in advance.

    You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
    It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
    Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
    I wish that Apple would invest more in discussion, and going towards making this more practical.

  • How to own the same e-mail-address for different Apple-IDs

    Hello
    I’m under the impression, that I can’t use the same e-mail-address for iCloud I used already in my Apple-ID for iTunes, because I get no verification mail for the iCloud account. Is this correct or did I something wrong?
    Thanks for supporting me
    I already raised this question in the iCloud forum, but till now nobody answered - may be the wrong sub-forum

    Many thanks for the answer - that's what I suspected. Anyway...
    The problem I have now is, that my Apple-ID I used already for some years in order to buy apps is in the "old" format (e.g. duggy832), that means not in the form of an eMail-address. iCloud accept only Apple-IDs in the “new” format meaning in the form like an eMail-address (e.g. [email protected]).
    So it needs to modify the old Apple-ID from duggy832 to [email protected] or to “transfer” – if possible – my shopping from Apple-ID duggy832 to [email protected]
    Which way is possible, which is safe/secure, which is recommended?
    Thanks in advance

  • ADF Mobile: How to change the font size of an Input Text field in .amx view

    Is there a way to change the font size of the input data (not the label) in a text field? Changing the font size in the Style Font/Text settings doesn't seem to do anything for the label or the value in the input text field. Is this a bug or is there a way to get this to work?

    Hi Anna,
    depending on the UI element there are a range of ways. (and I'm sure people will post plenty of answers to tell you how).
    However, if generically the fonts in you portal/wd applications are too small, you should consider changing your theme so as to have larger texts. Otherwise you will either need to customise all your applications, or you will get quite a lot of inconsistency of presentation between your various WDA applications.
    Do a search on "themes for Web Dynpro ABAP" and you'll find loads of resources.
    Hope this helps,
    Cheers,
    Chris

  • How to define the same FS item in configuration activites of Equity Data ?

    In Portugal the Financial Itens for Equity data are the same for the Fist Consolidation and for the other activities, for example "subsequent Consolidation". Thus, system is displaying message UCF6602 when we try to specify FS items for other activities. How can we repeat the same FS items in "UCWB/Consolidation Functions/Consolidation of Investments/Settings/Location of Values/Equity data /Activity" for the various activities?
    Otherwise can you confirm that if we are able to define FS Itens for Equity data (for example: Consequent Consolidation), and if we do not have
    modifications in Investment data, is enough for the system specify the FS itens for equity data. In conclusion, we only have to post data in investment data when we have changes for FS Investmemt item

    1. the GTIN is generated
    This should be "external" number range only.
    2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
    Unable to understand that why you need same GTIN in two different articles?
    Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

  • How to use the same mask, stencil, etc., for multiple layers? Photoshop equivalent of masked group?

    Hi I spent more than half an hour to search manual, forums, and Internet and still can't find the answer. Please help!
    For example, in a comp with 5 or more layers I want to use the same mask or stencil or what ever can hide areas of the layers 2,3, and 4 but layer 5 and any other eventual layers below should not be affected.

    Pre-compose the layers you want to mask and apply a track matte to the pre-comp using the mask. Think of pre-composing as an equivalent of creating a layer group.
    Use Set Matte effect on each of the layers you want to mask. This is easiest to do if you apply set matte once and then create an animation preset to apply to the other layers. Just get set matte to do what you want it to do on the first layer, Select Set matte in the ECW or in the Timeline, then go to Animation>Save animation preset. Then select all of the other layers you want to apply the set matte to and apply the preset.
    Put the mask at the bottom of the layers you want to mask and enable the preserve transparency switch, then nest this group in the composition with the other layers.
    Here's another tip. You could define a custom color for all of the layers you want to use the matt on, then use the custom color for a group selection. This may make things easier down the line.

  • How to get the same look as flash for borders?

    Hi i have selected circle and filled the circle with some color. now i want to have border around the circle so i have saelected stroke from the edit menu and applied with one pixel. how ever it is not giving a solid look as in flash. in photoshop the border looks like disolved and transparent. is there a way to get the same look as flash?

    Look at the image. i have described everything there in the image itself. even when we use layer style it is the same problem. is there a way to resolve this? the text in the image is as below.
    if u carefully observe the circle pointed there is a slight gap between the border and the filled color. This is not good. i dont want any gaps between the border and the filled color. I have used bucket to fill the circle and used stroke from edit menu to get the border for the circle.

  • How to run the same procedure in parallel for different parameter value.

    Hi There,
    I am currently working on extracting data in to flat file and I am able to do so for one revenue month (e.g. 200101) using PL/SQL procedure(get_rev_data). it takes almost 1 hour to execute the procedure completely and it generates 400 MB data file. Now I have to run this procedure for last 10 yrs of data (i.e. 120 revenue months) . my prolem here is to figure out a way/logic in such a way that I can run the procedure in parallel for each revenue month and at the same time it will write the data in respective data file for each revenue month. so the final result of this exercise would be 120 flat files, one for each revenue month with file names like
    EXTRACT_00001001 to EXTRACT_00001120.
    where
    first five digits : 00001 will indicate the Extract run number and
    last three digits : 001 will indicate the thread number for each run.
    I am thinking of doing this by creating a table "RevMonth" with two values (revenue_month, thread_num) and calling the procedure in a simple select statement and passing revenue_month as parameter of the procedure like
    SELECT get_rev_data(revenue_month, thread_num)
    FROM REVMONTH;
    But I am not sure if that will do the needful. Any idea on how to achieve this will be of great help. Thank you.

    Hi Smit,
    Thanks for the advise. I am not planning to run for all 120 months at once. actually I am planning to run like 1 year (12 revenue months at a time). I am not sure if that will work well but I was planning to run this through shell script (Unix) and will call the same procedure with different parameter (revenue_month and Thread_number) values and see what happens. I hope that will run in parallel for each revenue month.
    Let me know if you have more knowledge about it. THanks a lot.
    Thanks,
    .

  • How to setup the defaults (font, fontsize, fontcolor) for the Content Editor in Acrobat Pro 11.0.4?

    Hi folks, maby you can tell me if there is a way to edit the default font of Acrobat's Content Editor, especial in the add text mode.
    As default, my Acrobat uses Minion Pro in size 12. This drives me crazy, because i have to change this every time i add Text.
    Thanks!

    Unfortunately there isn't but it would make an excellent Feature Request.

  • How to display the rows in a color for specific dynamic condition.

    Hi,
    I am new to OAF. I created a custom Search Page.My requirement is we need to display a color for specific dynamic condition. Could any one help me how to do this?
    Thanks in Advance
    Sruthi.

    Hi,
    Sruthi wrote:
    I am new to OAF. I created a custom Search Page.My requirement is we need to display a color for specific dynamic condition. Could any one help me how to do this?------I think we can display colours at coloumns level only,nt at row levevl.
    ------use CSSStyle to set the colour, via webBean.
    Co-ProcessRequest:*
    import oracle.cabo.style.CSSStyle;
    CSSStyle oraaniltext = new CSSStyle();
    oraaniltext.setProperty("color", "#F6358A");
    oraaniltext.setProperty("background-color", "#000000");
    OAMessageTextInputBean comCode = (OAMessageTextInputBean)webBean.findChildRecursive("InvoiceIdTI");
    comCode.setInlineStyle(oraaniltext);
    http://www.computerhope.com/htmcolor.htm
    Regards
    Meher Irk
    Edited by: Meher Irk on Oct 25, 2010 9:46 PM

  • How to set the 4th Y axis color for a line graph

    Hello experts,
    I have developed a multiple y axis line graph using oracle reports 10g.
    It has got 1 x axis and 4 axes. I am able to set the color of the the first three y axes
    but the reports designer automatically assigns yellow color to the 4th axis.
    I mean there is no option in the graph wizard for changing the 4th color)
    How to change the color of this 4th y axis to a desired color?
    Cheers
    Sri

    Assuming you mean that your graph has 4 series, not 4 Y axes, you might try something like this:
    1. Save a backup copy of your current report in case the changes you are about to make don't work out and you want to revert to the backup copy.
    2. Using the Property Inspector, display the current value of the Graph Settings property for your graph. The value of the property should be something like:
    <rw:graph id...
    </rw:graph>3. Look for a <SeriesItems> tag and a matching </SeriesItems> tag in the property value. If you don't find them, add the following two lines immediately before the </Graph> tag.
    <SeriesItems>
    </SeriesItems>4. Between the <SeriesItems> tag and the matching </SeriesItems> tag, add (or update) a <Series> tag for each series that you want to specify the color for. For example, to specify the color of the fourth series as red, you would use a <Series> tag like this:
    <Series id="3" color="#ff0000"/>Note that the id numbers start at 0 for the first series, 1 for the second, and so on. The color value is a hexadecimal number specifying the RGB value of the color.
    You can also use the <Series> tag to specify other features like the marker shape.
    For more information on what you can do using the Graph Settings property, see this FAQ and Technical Note.
    Hope this helps.

  • How to solve the mail box size limit for thunderbird

    Hi,
    I tried to do archiving for my mails but everytime it will prompt me mail box size limit has reached and ask me to delete older mails and the problem is my HDD is more than enough to contain those archives so am asking if there's anything which i can get this solved for good?
    Regards.
    Andrew Koh

    Background info:
    Emails are downloaded and stored in the Inbox file written one after the other.; they are not stored as individual emails in their own file. So the Inbox folder in the FolderPane is actually a file.
    Any email you delete is marked as deleted and from your point of view it disappears from eg: Inbox and reappears in 'Deleted' folder. In reality it is still in the Inbox taking up space, marked as deleted and hidden from view. Compacting removes all traces of 'marked as deleted' emails and reduces the file size. If a file becomes corrupted and you compact that file you may lose good emails. this can occur if you do not compact on a regular basis.
    It is wise to create a backup on a regular basis.
    * http://kb.mozillazine.org/Profile_backup
    '''RE: Archiving'''
    Archiving is not a backup. It is a means of storing old emails in smaller files accessible within your Profile mail account. So releasing space in other folders.
    If you have been archiving all emails into just one Archives folder, then you are putting all of your emails into one file.
    Did you set up Archive Options?
    See info at these links:
    * https://support.mozilla.org/en-US/kb/archived-messages
    * http://kb.mozillazine.org/Archiving_your_e-mail
    Did you choose to archive by month and retain folder structure?
    By using these options, if you archived last months Sent emails and say you had another folder called 'Family' and you did the same, they would be stored as follows into smaller files, so you should not reach a mailbox limit.
    There will be no emails stored in the actual 'Archives' folder, nor the '2014' or '2014-5' folders, they will be in the relevant folder name - see below
    eg:
    > Archives
    >->2014
    >->->2014-05
    >->->->Family (one month of emails here)
    >->->-> Sent (one month of emails here)
    Suggest you do the following and in this order:
    * create a backup
    * delete any emails not required
    * compact folders
    * set up Archive options and organise emails as shown above, so that emails are only in that months eg: Sent archive Folder.
    * Create another backup when everything is organised.

  • How to define the boolean - String value mapping for SelectBooleanCheckBox?

    I have a SelectBooleanCheckBox component whose value is bind to a bean property of type String.
    <af:selectBooleanCheckbox text="State" label="State" id="sbc1"
    value="#{viewScope.myBean.stateText}" autoSubmit="true"/>
    The expected value for the Bean property is "Accepted" (for true) and "Rejected" (for false).
    Currently, the component return String value "true" for checked and "false" for unchecked.
    How do I set up the component so the boolean value can map to my expected String value?

    Sumit,
    Thanks for the response.
    I read that post too. However, I don't have any binding in my case because the component is bind to a bean property instead of an attribute of a view object.
    Without the binding in the page definition, I can't find a place to define the mapping between the Boolean value and the expected String value.
    Pricilla

Maybe you are looking for