How to define "User defined" palette in IMAQ Display?

When I select the "User defined" palette in the display, it just shows the regular grayscale palette. I want to replace this with the "Rainbow" palette but slightly modified in range. How do I do this?
Thanks!
MK
Solved!
Go to Solution.

Thanks Greg, I will try that, looks like that's the ticket!
Also, something I haven't been able to figure out yet is how to find (let LabView create?) the enumerated lists that match up to whatever port needs it (in this case "Palette Type"). i've tried wiring up a blank enum but it doesn't get filled out, where can I find them or create them (without having to make them manually?)
Thanks again

Similar Messages

How to create user defined button in alv report

how to create user defined button in alv report
thnks in advance.

Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using    p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
    exporting
      i_list_type     = 0
    importing
      et_events       = p_i_eventcat
    exceptions
      list_type_wrong = 1
      others          = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
    move 'TOP_OF_PAGE' to i_event-form.
    append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
    move 'SET_PF_STATUS' to i_event-form.
    append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
    move 'USER_COMMAND' to i_event-form.
    append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
   exporting
     i_callback_program                = v_progname
     i_callback_pf_status_set          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_grid_title                      = v_gridtitle
     i_save                            = 'A'
     is_layout                         = i_layout
     it_fieldcat                       = i_fieldcat[]
     it_sort                           = i_sortinfo
     it_events                         = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    tables
      t_outtab                          = it_final
   exceptions
     program_error                     = 1
     others                            = 2
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform.                    "SET_PF_STATUS
endform.                    " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha.

How to use user-defined packages in JAX-RPC web service

I am trying to use Object of my class located in my package in jax-rpc webservice,the code is
package supercomputer;
import Hello.*;
public class SuperImpl implements SuperIF
public String sendParam(String data)
Temp ob=new Temp();
int i=ob.get1(10000);
return data+"returned by supercomputer";
Temp is located in Hello package,I have jar the Hello package as Hello.jar and has set its classpath in targets.xml of Ant tool.
The code compiles well and service is deployed successfully,but when i try to call the service from the client its gives me following error.
[echo] Running the supercomputer.SuperClient program....
[java] java.rmi.ServerException: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:357)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:228)
[java] at supercomputer.SuperIF_Stub.sendParam(SuperIF_Stub.java:60)
[java] at supercomputer.SuperClient.main(Unknown Source)
I dont know if it deploys why it gives error on client side.
Please tell how to use user-defined packages and class in jax-rpc service code ,i am not talking about passing user-defined parameters i am just talking about making objects of user defined classes in jax-rpc service.I think there is some problem in classpath.
Please guide me in doing that.
Thanks,
Farrukh

Farrukh,
I don't know if your error is about a missing class from your custom package, ... what track did you followed to say that?
To use your package in the implementation of you web service, you should only follow the rules of making a web application: put your package jar in your \lib directory inside WEB-INF/ or your package classes unjared in classes (also in WEB-INF/).
As I already said, I have doubts that your error should be originated from a missing class from your package, but:
-try to see the logs (errors?) when you deploy your web service that could give a hint about the problem.
-try to see if you can access your endpoint through your browser to see if there is a online status
-display your config/WSDL file, and the steps you did to build your web service.
regards,
Pedro Salazar.

How to import user defined class in UIX page?

Does anyone know how to import user defined class in UIX page so that the class can be called in the javascript in the UIX ?
Thks & Rgds,
Benny

what you are referring to is not javascript.
it is JSP scriptlets. These are very different.
In order to keep a strict separation between View and Controller, it is not possible to run arbitrary java code from within your UIX code.
However, you can run java code from within a UIX event handler; see:
http://otn.oracle.com/jdeveloper/help/topic?inOHW=true&linkHelp=false&file=jar%3Afile%3A/u01/app/oracle/product/IAS904/j2ee/OC4J_ohw/applications/jdeveloper904/jdeveloper/helpsets/jdeveloper/uixhelp.jar!/uixdevguide/introducingbaja.html
event handler code is run before the page is rendered.

How to map user-defined fields in XML communication on SRM site

Hi All!
We use the External sourcing scenario and we transfer requirements from ERP in SRM through XI (PurchaseRequestERPSourcingRequest_In)
We should transfer the user-defined fields, but we can not map it in SRM site.
We have enhanced enterprise service in XI, have realized BADI PUR_SE_PRERPSOURCINGRQCO_ASYN on ERP site.
I see the XML message with ours z-fields in tr. SXI_MONITOR (into SRM), but I can not find it in BBP_PDISC.
We try to use BADI BBP_SAPXML1_IN_BADI (there is no method for SC), and BADI /SAPSRM/BD_SOA_MAPPING (z-fields is empty)
Someone can tell how to map user-defined field for SC?
Thanks in advance
Evgeny Ilchenko

Hello, Julia
We have found solution our problem
We have enhanced standard service in a new enhancement name space and defined own enhancement elements in our namespaces. Then these enhancement elements refered to the SAP standard Enterprise Service.
But In our new interfaces were different XML namespaces
When we have correct an error we could use the next BADI
on ERP site: PUR_SE_PRERPSOURCINGRQCO_ASYN
on SRM site: /SAPSRM/BD_SOA_MAPPING
BR,
Evgeny

How to create User Defined Variables in Procurement Contract 12.1.3

Hi,
We are using Procurement Contract 12.1.3. As per our business requirement while creating contract template we need to use many variables which are not available in 'System Defined' variable list. Please guide us with some samples (step by step) how to create the 'User defined' variables.
Regards,
Prabhu

Hi Prabhu,
Did you get the setps how to create user defined variables in Procurement contracts? if so please share me the setp by step flow.
Prakash

How to alter user defined objects in oracle

Hi all,
Can any one tell me how to alter user defined objects in oracle .
Thanks,
P Prakash

prakash wrote:
Hi all,
Can any one tell me how to alter user defined objects in oracle .
DROP
then
CREATE
Handle:      prakash
Email:      [email protected]
Status Level:      Newbie (80)
Registered:      Feb 3, 2011
Total Posts:      185
Total Questions:      67 (65 unresolved)
so many questions & so few answers.
How SAD!
Edited by: sb92075 on Sep 22, 2011 9:22 AM

How to remove User Defined field in programitically

Hi,
How to remove user defined field in programitically. send the code
Thanks,
P.Suresh Kumar

Hi,
Please take a look at this thread:
Re: Can't remove a user defined field with DI API.
Kind Regards,
Owen

How to create user defined transactioncode in bw

hi,
How to create user defined transactioncode in bw.My user want this
regards,
Abhishek

hi
by using the t code SE93 u can create.
after that it will ask u for what ur going create
1.Program and screen
2.Program and selection screen
3.method of class
4.transaction with variant
5.transaction with parameter
here u have to select appropriate option based on ur requirement
and enter the options as per ur needs save and activate

How to add user defined tab in the Header level of T-Code O4NM?

How to add user defined tab in the Header level of T-Code O4NM?
I tried with BADI but I cant able to find any BADI for it and also searched for screen exit too..

Can you check the user exits,
OIJNOM_N and OIJTKT_N
Cheers,
Balaji

How to create user defined functions in xi.

how to create user defined functions in xi.
can anyone give info with screen shots.

Hi,
Please follow the steps mentioned in below link
http://help.sap.com/saphelp_nw04/helpdata/en/f8/2857cbc374da48993c8eb7d3c8c87a/frameset.htm
also refer below links to know more about UDF
udf
Thanks
Swarup
Edited by: Swarup Sawant on Mar 3, 2008 3:59 PM

How to create user defined metrics for SQL Server target?

The customer is not able to create a user defined metrics for SQL Server target.
This is very important for him to use this product.
He is asking how to create user defined metrics?
I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
But it would work for an Oracle DB, but his target is SQL Server DB
Not able to find the "User-Defined Metrics" link from Database home page.
How to create user defined metrics for SQL Server target?

http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm

How to Developed user defined functions to call function modules in SAP R/3

how to Develope user defined functions to call function modules in SAP R/3 system

Hello Raja,
Go through this V.imp Link...
http://download.oracle.com/docs/cd/B10464_05/integrate.904/b10408/rfc.htm
Steps to crate FM..
Follow these steps..
Go to the T: code SE37
First You Create Function Group
On That u specify
Function Group Name..............
Short Text..............................
save...
Go to SE 37
Specify the Function Module Name: Eg: Z_Bapi_Materialmaster
Short Text.......
Save...
Next Go to Attributes..
Select Radio button : Remote enabled model
Go to Parameters..
Click Import...
Give Parameter Type Associate type S.t
next Click Export...
Give Parameter Type Associate type S.t
Next Click Tables Button..
Specify tables..
Next click source code button..
Write Source code here..
Eg : Select statements Etc..
Finally we should be select the Radio button Enable remorely
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/bapi%2bstep%2bby%2bstep
Re: User Defined Functions Tutorials
Hope this information is useful to you..
Thanks ,
Satya Kumar..

How 2 Develope user defined functions to call function modules in R/3 syst

How to Develope user defined functions to call function modules in SAP R/3 system....in xi

HIi,
If those function modules are RFC enabled then we can call those function module from user defined functions. Please see below link
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Reward points if helpful.
Thanks,
Vijay Kumar T,

What is Meter reading validations (System defined & User defined)

Hi Experts,
1 )How to configure Meter Readings (Technical Control Parameters, MR Control, MR Notes etc)
2) what is Meter reading validations (System defined & User defined) and how to configure it.
3) What is Register Relationships,Device Groupings & Device Allocations and how to configure.
Kindly explain with examples.
Thanks in advance.
Regards,
Shabnum

hi,
Meter Validation Steps:
1.     The Validation Process begins with Meter Reading Order Creation when the expected consumption is determined for the meter reading to be recorded for each register. The meter reading status is u201C0u201D or un-entered at this time.
2.     The meter reading is entered via an upload program as part of the batch processing or entered manually.
This result is validated or evaluated against the permitted range of allowable meter reads/consumption for that register. The expected consumption is the basis for determining the range of the minimum and maximum values for the meter reading.
If the result is plausible, or valid, for all registers of the meter, the billing order becomes billable and the contract/installation is passed to billing for further processing. The meter reading status is updated to u201C1u201D or billable.
If the meter reading is validated as implausible, the meter reading result is transferred to the List of Implausibles for further processing (EL70). The status of the meter reading is u201C2u201D or automatically blocked. One or more independent validations can be failed in this validation process.
3.     During processing, the agent can release the meter reading for billing; the status is updated to u201C4u201D, released by clerk. The reading is accepted as measured. The agent can also process the implausible meter reading result using transaction code: EL27 Execute Correct Implausible Meter Reading Results. EL27 is recommended for individual processing.
SAP Easy Access  Utility Industry  Device Management  Meter Reading  Correction of Meter Reading Results  Implausible Results (Transaction EL27)
EL70 is recommended for processing of implausibles for mass processing. It is not on the menu, however, one way to open the screen is:
SAP Easy Access  Utilities  Device Management  Meter Reading  Correction of Meter Reading Results  Implausible Results
Once the screen opens, click on the List button on the application toolbar
4.     The agent may also correct the meter reading. If this corrected read is validated as within range, the status is updated to u201C1u201D, billable.
5.     Alternatively, the reading can be determined to require follow up action and a service order is executed from the IC for re-read. A read status has been configured to support this flagging of the account for follow-up service order processing.
6.     When the service order is returned from the field, the CSR releases corrects, resets or possibly estimates the meter reading depending on the outcome of the service order processing.
7.     The meter reading is then passed to the billing engine for billing execution when the reading is validated as plausible.
-Siva

How to define "User defined" palette in IMAQ Display?

Similar Messages

Maybe you are looking for