How to Deinstall HR module

Hi hussein/helios
I accidentally (included) installed the HR module :(, is there away to deinstall it?
thanks a lot
MsK

Hi,
The supported way to do this is to start the installation all over again. You may log a SR and see if Oracle support has any workaround.
Regards,
Hussein

Similar Messages

Deinstalling a module in PeopleSoft FSCM

Hi ,
Currently we have purchasing, Asset Management and General Ledger modules within our system. Business has decided that Purchasing will not be used any more as they have an alternate system developed. So, for saving the license renewal costs the client has decided to deactivate this module in the system.
We have some customizations done to the purchasing module and there is data related to the purchasing module as well in the system. Could some one in the group provide some inputs on how to go about with this deinstallation? I am looking for some basic information on what all has to be done to deinstall a module with the remaining modules intact. And, there are no integrations between the existing modules and the module that has to be deinstalled. Also, Is there any necessity to remove the data and the customizations done to the system as well as the licensing doesn't exist anymore for this module?
Please provide any valuable information.
Thanks

Go to
Main Menu > Set Up Financials/Supply Chain > Install > Installation Options
Select 'Products' -- You will see all the modules that you have installed/licensed have check box selected
If you de-select the check box corresponding to a module, that module will be revoked in your system
I'm not sure about the data/customization part, but I believe you can archive it and keep for future reference rather than removing it
Also, I'm not sure on the licensing cost part also, you may need to raise an SR and check with GSC on that.
Hope this helps
Thanks

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How to configure Application module pooling?

I want to know wheather bc4j container itself manages Application module pooling if yes then please tell me is there any file to set parameters for congiguration like one which we have for apache web server.
If no then please let me know how to create applicatiom module pooling.
Thanks in advance.

Application module pooling is configurable through an application module configuration. In order to edit an application module configuration you may right click an application module and select Configurations...
The BC4J data web beans and the BC4J JSP datatags are both application pool clients. The BC4J documentation includes descriptions of the application pool properties. The documentation also includes a code sample which illustrates how to write your own pool client.

How to debug adapter module in PI 7.1

Hello all,
I am trying to figure out how to debug adapter module in PI 7.1.
I guess runtime debugging ( switch AS java in debug mode and attach NWDS to the AS Java to debug as module is being executed) is not possible with adapter module. Please let me know if this is indeed possible and how to enable it.
The only option is to send debug information to log file. So in the module code like:
audit.addAuditLogEntry(key, status, message);
location.debugT(SIGNATURE, message);
I've read that for PI 7.0, you need to add log-configuration.xml to meta-inf. Is this still required for PI 7.1?
My next question is how to read the log in audit log and in location. I've read that the audit log can be read in .../MessagingSystem/monitor/monitor.jsp, under which section of the page I can read the audit log? I can't see any of my log there.
For log in location, I guess I need to go to NWA, can you please share the path (navigation) in NWA to see the location?
Thanks
Jayson

> I guess runtime debugging ( switch AS java in debug mode and attach NWDS to the AS Java to debug as module is being executed) is not possible with adapter module. Please let me know if this is indeed possible and how to enable it.
It is possible for adapter modules as well. I know this from our developers
It should work like this:
/people/christian.drumm/blog/2008/09/30/debugging-java-mappings-using-sap-netweaver-developer-studio
> The only option is to send debug information to log file. So in the module code like:
> audit.addAuditLogEntry(key, status, message);
> location.debugT(SIGNATURE, message);
> My next question is how to read the log in audit log and in location. I've read that the audit log can be read in .../MessagingSystem/monitor/monitor.jsp, under which section of the page I can read the audit log?
In the RWB under Message Monitoring for Adapter, or try the shortcut
http://server:port/mdt

How to deinstall Oracle Developer 6.0

Dear Pro.
I wondered how to deinstall Oracle Developer 6.0 from Windows 2000. although i tried using Developer 6.0 CD to deinstalled the products, but after i clicked the remove button. whole windows is gone. using Oracle 8 CD doesn't work too.
could i just delete the folder which contains developer 6.0, will it work? should i change some path or some data in the configuration file?
thank you for reading the questions.

IMO there is just one way that works:
- first step: look for running forms services (forms server or more), stop them
- second step: go to the registry, erase the whole key: hkey_local_machine/software/oracle
-delete the whole directory with forms.
Its brute force, I know; but it works within 5 minutes!!

How to save a Module in Visual Basic with Excel for Mac 2011

On the MS support pages it shows how to create a module that will turn digits into written words:
http://support.microsoft.com/kb/213360/en-us
so if you enter $32.50 it will convert it to Thirty-Two Dollars and 50 cents. Perfect for batch payroll work!
Using Excel for Mac I open the Visual Basic editor (which I clearly know nothing about!), paste in the text provided by Microsoft and it works perfectly.
BUT... if I close that workbook that module is gone. I can't use it again in the next workbook. Surely there's a simple way to save the module so it is available in all future workbooks... yes? This one has stumped several MS techs so far.

Hi,
I have no Excel for Mac, so I can't test this issue .
Did you save the Excel workbook as Excel Macro-Enabled workbook(*.xlsm)?I guess Excel would prompt you if you want to save the VBA code when you close the workbook.
Wind Zhang
TechNet Community Support

How to create function module for getting customer name

Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R

1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna

How to create a module pool program

Dear Guru
I want to know know how to create a module pool program from se80 step by step. I want to know the steps where i will get the four includes like form routines, PAI, PBO, and global data please its very urgent.
Thanks & regards
Saifur Rahaman

hi Saifur Rahaman,
goto se80 then click find program,
next u want any name of the program enter as,
Attribute type as find Module pool click it.
next u want any package and save and activate.
program name with create screen with any number then
click layout and u want any object and save , actived.
click flow logic , four types as PBO and PAI and POV, POH.
PBO---> Trigger is before screen.
its applied for display screen and inactive or no display screen only
PAI--->Trigger is after screen
when u want button then its processed.
POV--> Value requested for F4.
POH-->Help requested for F1.
Reward if useful,
S.Suresh.

How to INclude TEXT MOdule created in SForm?

How to INclude TExt Module created in Samrt forms into a text node...?
PLease explain.....ANy suggestions will be appreciated...
REgards,
Kittu

Hello Netaji,
IN general attributes, from the drop down menu. I had selected Text Module then It is asking me for the
Name : zxxx(Name of the Text module created in SForm)
Language : ENGLISH
Selected the option - No error if no text exists
- ALways copy style from text module
Then I had clicked on COPY button...Then it is automatically turning into Text Element
It is showing nothing in that Text area. Am I going right?
Please correct me....If I am wrong....I am trying to put this in Text node.
I had created a Text module in the Smart form by selecting the Radio Button in Smart form.
Please help....
Regards,
Kittu

How to install Apache module mod_rewrite

Kindly tell me, how to install Apache module mod_rewrite which is a standard module in the Oracle HTTP Server (OHS).. I have installed OAS(10.1.2) but mod_rewrite module is missing..
Edited by: SrinivasanSeniorDBA on 26 Feb, 2010 2:42 PM

Got it

How to deinstall Oracle database

I installed Oracle database 11g twice on my machine, I have dbhome_1 and dbhome_2, but I want to uninstalled dbhome_2.
I have started to uninstall it but where i hanged is where in the command prompt to : Specify all Single Instance listeners that are to be de-configured [LISTENER]:
I don't know the information to put there. I want to know what to put there.
Thanks.

Hi,
Welcome to OTN form.
Oracle support id:
Oracle De-install Utility – 11g R2 [ID 886184.1]
How To Deinstall Oracle Home In 11GR2 [ID 883743.1]
Deinstalling an ORACLE_HOME in 11gR2 DB = MORE WORK! | Oracle High Availability
Oracle De-install Utility | DBASoul.com
for Windows OS:
Deinstall Oracle 11gR2 windows | DBA
Thank you

How to deinstall Oracle Developer 2000 6i and again install properly

hi
My HDD is partitioned as C,D,E and F. Oracle 9i is successfully installed in my system in C:\ drive (C:\oracle)and it's running fine. when i was going to install Oracle Developer 2000 6i in F:\ drive it dint show neither any error message nor message like successfully installed but all icons are there. when i was started the forms buider it's showing " ORA-12154: TNS: could not resolve service name" error. how to run forms builder? i have installed in XP. should i deinstall Oracle Developer 2000 6i? if yes, how to deinstall that and how to install it properly?
should i install oracle 9i database before and then oracle developer 2000 6i or vice versa???
will be waiting for your valuable suggestions.......
thanks & regards,
Priyatosh

hi
the tnsnames.ora file is in F:\oracle\Frm61\NET80\ADMIN. i have attached the contents of that file below. i don't know where to change and what to change.
Beq-local.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = beq.world)
(PROTOCOL = BEQ)
(PROGRAM = oracle73)
(ARGV0 = oracle73ORCL)
(ARGS = '(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')
(CONNECT_DATA = (SID = ORCL)
Tcp-loopback.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 127.0.0.1)
(Port = 1521)
(CONNECT_DATA = (SID = ORCL)
Example1.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = Production1)
(Port = 1521)
(CONNECT_DATA = (SID = SID1)
Example2.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = spx.world)
(PROTOCOL = SPX)
(Service = Server_lsnr)
(CONNECT_DATA = (SID = ORCL)
Example3.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = nmp.world)
(PROTOCOL = NMP)
(Server = FinanceServer1)
(Pipe = ORAPIPE)
(CONNECT_DATA = (SID = ORCL)
please help me out.....
thanks & regards,
Priyatosh

How to create function module in abap for VirtualProvider in bi

how to create function module in abap for VirtualProvider in bi ???????????????
can any one help me with simple example ?????????????????
Moderator message : Duplicate post locked. Read forum rules before posting.
Edited by: Vinod Kumar on Jun 15, 2011 4:40 PM

Hi ,
Thanks for replies about my question??.
If i am using the exit in my char relation ship how can i debugg that exit???
if i am using BPS0 how to do it???If i am using BPS_WB how to do it??
Case1.Variable (type Exit) I known how to do debugg this one in BPS0 but i'm not sure in BPS_WB??
Case2:Char Relation Ship(Type Exit) how to do in BPS0 and BPS_WB??.
Thanks.

HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM

PLEASE ANYONE TELL ME, ABOUT HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM. IT IS VERY URGENT!!!!!!!!!1

Hi,
Under Global Definitions, we have 'Form Routines' tab. Under this tab, u can have a dynamic subroutine call. With in FORM and ENDFORM, you can call the Function Module.With in the Program Lines editor, u can define the subroutine........PERFORM.
If helpful, reward points.
Rgds,
CK

How to Deinstall HR module

Similar Messages

Maybe you are looking for