How to delegate the work flow process.

hi
i was wondering if someone has taken a leave and he is replaced by an employee x,the work flow approval should be directly move to the employee x.
but its not the case.as when someone is one leave,the workflow does not go to his replacement to approve
Is there a way how to delegate the workflow process?"
Thank you

Hi,
By identify the replacement in leave process, workflow process doesn't route to that person. I guess that replacement field is just for data capturing only. The approver should use delegate functionality available on notification responsibility to identify which process route to which person in a given time period.
Thanks

Similar Messages

Work flow process in planning

hii am wondering how i can start the work flow process in planningapplication. thanks and regards,Balu

Hi,
Workflow process is managing the budget process, by which budget can go through review process and the review process is managed in Planning.
Planning review is based on a Planning unit, which is a combination of scenario, version, and entity. Planners enter their numbers and then promote it to reviewer. The numbers for that entity become locked and reviewer gets an e-mail about budget submission. Reviewer can approve, reject or sign-off the budget. E-mails are generated to inform the person to whom a Planning unit has been promoted/assigned in the workflow.
Read more at:
"Managing the Budget Process" in
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hp_admin.pdf
Cheers
RS

The work flow of AR invoice to AP Supplier? (Urgent)

Hi Experts,
I am a new user of oracle finanical. There are some urgent issues I need to solve and I could not able to find in Google. Hope someone can give me a helping hand.
We are on 11i (Oracle Financial modules only: GL/AP/AR/FA), I want to ask about how to make the work flow of AR invoice to AP Supplier (e.g. promotion fee).
1. Should we create a customer account and make a invoice in AR for AP Supplier?
e.g. create a AR invoice
DR Receivables $1000
CR Revenue $1000
2. Could we settle/match the AR invoice in AP outstanding as requested by AP Supplier?
And if yes, how to do it and please tell me the detail work flow? And if not, any solution?
Thanks
Sam

Hi Sam.
When you run the Supplier Customer Netting Report you may find that:
-The balance is in your favor.
-You have to pay to the supplier.
For both cases you should create a Bank Account to address the netting operations.
Let’s suppose you face the following situation:
-Customer’s balance is $500
-Supplier’s balance is $600
In this case you have to pay $100 to your supplier.
Using the netting Bank Account record a receipt of $500 and apply it to your customer invoices:
DR     Netting Bank Account     $500
CR     Receivables          $500
Your customer’s balance is now zero.
Record a debit memo in AP against the supplier:
DR     Liability
CR     Netting Bank Account     $500
Your supplier’s balance is now $100.
Issue a payment in this amount using your normal bank account.
DR     Liability          $100
CR     Cash          $100
Your supplier’s balance is now zero. Netting has been done. Check the Cash Account used on the netting Bank Account on a regular basis. If the balance is not zero then something is wrong.
Octavio

Work Flow Process in a Support Project

Hi Gurus,
Could you mail the work flow Process of Solving a Ticket.ie Introducing a New configuration and its Authorizations?
Regards,
Sarosh

Hi,
I guess there are a lot of OWB project people that have similar needs as you.
My needs have two main reasons:
Managing incremental loading - I need to know last time a specific mapping ran (start-, end time and status). This might be tricky however, as clocks on different instances might be out of sync - use NTP (network time protocol sync) or maintain source system mapping time in supporting tables.
Modularizing workflows with lots of mappings - current workflow operators force you to implement everything in a single process to maximize parallellism - because you cannot wait for events outside of your subprocess. Modularizing is achieveable with a workflow event publish/subscripe scheme or a function that blocks until a specific process with the same top_level_execution_audit_id finishes. If I settle for a little less parallellism, just querying the status of the process will do.
Such functions can be implemented around the public view ALL_RT_AUDIT_EXECUTIONS, but it would have been really nice if they were a part of the OWB library.
Regards, Hans Henrik

Need help on how to put condition in the work flow

hi friends,
I want to check the conditions whether the customer is available in the server or not .
If YES i want to do one process in the work flow
or
If NO i want to do one process in the work flow. Please help me out on this.
                Ex:
                   KUNNR
         YES                NO
    1stProcess             2nd Process.
Pls send me the screen shots or solution for this i searched a lot in this but I could not find...
Thank you,
Vikram.c

Hi,
you can use a CONDITION step to achieve this requirement. Try the following link, it may not exactly match your requirement but will give you a clear idea on how to proceed,
[http://www.****************/Tutorials/Workflow/ConditionStep/Condition.htm]

IPhoto project will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process. Christmas gift, really need to get this done, have worked MANY hours on putting it together. Please help!

Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT

How to retain the work item in inbox of user if user press the icon cancel?

HI,
we are using a text editor in approval section of workflow where the user needs to enter the reason for apporval or rejection.
the requirement is how to retain the work item in inbox of user if user press the icon cancel? there are two icons in editor,one is ok(tick marg) and cancel(cross mark).
so when user dont enter any text in the editor and press on cancel icon,then approval/rejection should not authorize and work item will remain in the user's inbox .unless and untill he enters the text.
i have tried LEAVE TO TRANSACTION 'SBWP'.leave program etc but nothing is working.
please guide me.
thanks
prsahu

Hi,
Go with Sangvir Singh suggestion.
It also looks neater from a Business Process Modeling perspective. You continue the process flow only when a change has occurred.
Kind regards, Rob Dielemans

Work Flow Process in OWB 9.0.3.0.1

I would like to generate a work flow process to execute the mappings with condition as if a mapping success continues with de execution of the other mapping. In this version of OWB there is not implemented any process flow and I would like to Know how can i do this process flow.

Hi,
I guess there are a lot of OWB project people that have similar needs as you.
My needs have two main reasons:
Managing incremental loading - I need to know last time a specific mapping ran (start-, end time and status). This might be tricky however, as clocks on different instances might be out of sync - use NTP (network time protocol sync) or maintain source system mapping time in supporting tables.
Modularizing workflows with lots of mappings - current workflow operators force you to implement everything in a single process to maximize parallellism - because you cannot wait for events outside of your subprocess. Modularizing is achieveable with a workflow event publish/subscripe scheme or a function that blocks until a specific process with the same top_level_execution_audit_id finishes. If I settle for a little less parallellism, just querying the status of the process will do.
Such functions can be implemented around the public view ALL_RT_AUDIT_EXECUTIONS, but it would have been really nice if they were a part of the OWB library.
Regards, Hans Henrik

Could you explain the work flow logic in dispute management

Hello,
Could any one explain the the work flow logic in dispute management .
When will the first work flow initiate and who will recive the first notification and what are the action he/she usually perform. How it trigger to next level and what is the events consider for the next work flow trigger.
If some one could share a real work flow example in line with Dispute management will be great...
regards
Sibichan

Dispute management workflow will help to automate business process.
When some action or information is expected form individual or department then
Workflow can be triggered on editing some field in dispute case and workitem is send
to individual or group, So that they can respond to it.
We can use function email notifications to speed up the process.
Based on organizational needs triggering events can vary.
Regards,
Raju

How to increas the max user process number in Solaris 11?

Hey
Could anyone told me how to increas the max user process number in Solaris 11? I tried below as described in https://blogs.oracle.com/hasham/entry/solaris_10_increasing_number_of , but it cannot work.
set pidmax=60000
set maxusers = 4096
set maxuprc = 50000
set max_nprocs = 50000
Thanks!
Edited by: 966272 on Oct 18, 2012 7:38 AM

Perhaps you should work your original forum post:
Oracle 11g installation fail on Solaris 11 64bit - ORA-00443
through to a resolution before you complicate things that likely don't apply.
You make an assumption in that other post about exceeding various maximums. That may be true or it may not be true. Since the installation of a database program seems to be your actual expectation, go work that forum thread instead.

How to automate the data load process using data load file & task Scheduler

Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
Thanks

To follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.

How to automate the data flow to content servers?

We have ECC connected to CS. Could you help tell how to automate the data flow into the CS? Thanks a lot!

What do you use the Content Server for? If its for archiving you need to run the STORE job to send the data to the CS.
I can't see a reason to automate that process
Regards
Juan

Grant the access rights to manager run the work flow history report without edit /delete rights

I found that only Team Member / Workspace creator / Administrator can run
the work flow history report. However, we have a Purchase Order request
which need ask the supervisor for 1st approval and manager for 2nd approval.
But those managers want to see who prepare the P.O. and supervisor done the
first approval before their 2nd approval. How can I can grant the access
right to the manager to run the work flow history report for this purpose? I
tried grant the role "team member" to those manager, however, it will also
allow them to modify or delete the entry as they are the team member, but we
only want allow those managers can approve the entry and view the work flow
history without other acces such as add/delete/edit to prevent the human
mistake.
Pls advise how can I do this? Thanks!
Regards

Create a new role in teaming can fulfill this requirement. Thanks!
"Joey" wrote in message news:_Cvqo.66903$[email protected]. .
I found that only Team Member / Workspace creator / Administrator can run
the work flow history report. However, we have a Purchase Order request
which need ask the supervisor for 1st approval and manager for 2nd approval.
But those managers want to see who prepare the P.O. and supervisor done the
first approval before their 2nd approval. How can I can grant the access
right to the manager to run the work flow history report for this purpose? I
tried grant the role "team member" to those manager, however, it will also
allow them to modify or delete the entry as they are the team member, but we
only want allow those managers can approve the entry and view the work flow
history without other acces such as add/delete/edit to prevent the human
mistake.
Pls advise how can I do this? Thanks!
Regards

Same work item in the work flow is generating 2 mails with a time gap.

Hi,
I have a workflow object where,The same work item in the work flow is generating 2 mails with a time gap.
Please suggest how should I resolve the problem.
Thanks in advance.

Hello Rob & Rick,
Many thanks for your inputs.
I am working on smartforms for the first time.It still some time till I find a solution with the inputs that you have suggested.
I will keep this thread posted,& if I am not able to complete the task,i will close the thread.

No launch work flow process in workflow administrator web

i am having oracle ebs R12.1.1 on windows server. But i do not have launch work flow process in workflow administrator web. With out this option i can not run workflows developed using work flow builder in apps. How to get this please help.

hari14 wrote:
i am having oracle ebs R12.1.1 on windows server. But i do not have launch work flow process in workflow administrator web. With out this option i can not run workflows developed using work flow builder in apps. How to get this please help.If you have System Administrator responsibility, navigate to (Security > User > Define), query your name and assign "Workflow Administrator Web Applications" responsibility to yourself.
Thanks,
Hussein

How to delegate the work flow process.

Similar Messages

Maybe you are looking for