How to delete a compresed request

Hi!
I have a doubt if its possile to delete only one request that i have compresed in the cube.
I have four request compresed and i need to delete only one.
I have the data in the psa too.
If possible to do that?
Thanks a lot
Monica Elizondo

There is a reverse posting option in PSA which reverses the KF values. You can then update the data target with this request which will negate the posted request (not delete).
ie if original request had
AA BB 10
the reverse posting record will have
AA BB -10
The net result after you update in the cube will be
AA BB 0
Not necessarily same as delete.

Similar Messages

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

How to delete multiple yellow request in PSA

I am in BI7 and I have to delete the all the request present in PSA But in my PSA there are around more than 500 request which are in yellow status.Please suggest how to delete all the request in one go ,Since it very cumbersome to change status of every request to red and then delte it

Hi,
Debjani thanks for your reply,
It helped me
I have first deleted the contents from PSA table and
then I have searched for request in RSTSODSREQUEST but this table does not contain that requests
then i have got another table RSREQDONE whcih contains that request so I have deleted request from that table.
Final solution is
Go to SE14 >> Give the PSA Table name >> delete it
Then delete the requests from the table RSTSODSREQUEST/RSREQDONE

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

How to delete 100+ released requests from the import queue?

Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
Thanks

To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

How to delete the open requests in the LBWQ

Hi guys ... Can any one let me know how to delete / update the open requests in the queue . I need to delete the Open requests in the LBWQ...we are applying patches and for that we need to delete from LBWQ and RSA7...I guess there is an ABAP report which will deletes the open requests...Can any one let me know that report name please
Thanks in advance...
regards
Edited by: sam on Dec 17, 2007 6:15 PM

If your job control runs fine then best thing is to transfer the records from LBWQ to RSA7 and pull it to BW. If you do this all your delta data is intact and you do not loose any delta data. But if you delete the LBWQ you potentially loose all youre delta data. You can go to LBWE and start the job control and move data to RSA7 and then pull it to BW.
But i am not very clear why you wish to delete this data ? If you do this then better you reinitialize all your delta data by following your normal procedure of filling up the setup tables and then initalizing in BW.

How to delete the spool request number

HI Masters,
            My program creates a spool request. And i want to delete that spool request number? How to delete that??
              Thanks in advance.

hi
good
The program are RSPO0041 or RSPO1041.
This is handy whenever you encounter a user who managed to create a lot of spool requests which are choking your system.
Deleting them with SP01 will be too slow and you will get time out if it exceed the online time limit specify by your basis people.
<b><REMOVED BY MODERATOR></b>
thanks
mrutyun^
Message was edited by:
        Alvaro Tejada Galindo

How to delete cube old request by using abap code?

Dear experts,
Here is one thing need your help:
We have one cube need to delete the old request. This cube is loaded daily and only need to delete the request of that month.
I know there is one "Delete Overlap Requet" type in the process chain, but my concern is: in our DTP filter, different day the selection will have different values, let's say A and B, and A and B are not even overlap at all.
So my question is:
1. Can I still use "Delete Overlap Request" to delete the old request?
2. If so, I see it can be implemented by abap routine, can anyone give me some sample code? Like how to delete request only in this month. And how to delete request whose selection is equal to a specific value.
Note: one of the source cube is real time cube so can not delete the request from infopackage.
Any post will be appreciated and thank you all for your time in advance!
Regards.
Tim

Here is the intial code when I choose "Request Selection through Routine", please help me on how to choose the specific request and delete them in this routine.
program conversion_routine.
Type pools used by conversion program
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
    InfoCube        = ZPC_DEL_REQ_ZBPS_C01
form compute_ZPC_DEL_REQ_ZBPS_C01
tables l_t_request_to_delete structure rsreqdelstruc
using l_request like rsreqdone-rnr
changing p_subrc like sy-subrc.
*Insert Source Code to decide if requests should be deleted.
*All Requests in table l_t_request_to_delete will be deleted
*from Infocube ZPC_DEL_REQ_ZBPS_C01.
*Add new requests if you want to delete more (from this cube).
*Remove requests you did not want to be deleted.
$$ begin of routine - insert your code only below this line        -
     loop at l_t_request_to_delete.
     endloop.
     clear p_subrc.
$$ end of routine - insert your code only before this line         -
endform.

DTP to Open Hub - How to delete failed previous request?

I have instituted the use of an open hub destination to export data to a csv file using a process chain.
Occasionally, the attempt fails and subsequent runs of the process chain also fail because the previous attempt is "red".
Is there any way to specifically delete the failed request from within the process chain?
The error message speaks of setting the "Automatically Repeat Red Requests in Process Chains" indicator, but I have not found it!
I will award points to helpful solutions.
Thank you in advance.
Andy

Thanks YJV.
But what I am asking is how to embed this in a process chain so that each time it runs, it first deletes all previous requests. There is such a command for regular DTP's but not for the ones that export to open hub. At least they do not appear in the F4 list when trying to generate this command in the process chain.
Therefore, I am still looking for either the mentioned indicator which can be set for (all) DTP's or for a way to delete all related requests from within a process chain.
Andy

How to delete perviously loaded request from cube

Hi All,
I am loading a standard cube from r3 w/o PSA through DTP.
1 ) how to delete data automatically from cube w/o using Process chains.( previously we have a facility in Infopackage to delete old loaded data ) .In BI7 how to delete the same automatically.
2) How to schedule the DTP to run on daily basis( w/o process chain ) .I am not able to schedule it via RSRDA ?
What might be the reason ?
Regards
KK

Chivukula,
I'm curious as to why you aren't using the process chains. There's now a "delete overlapping request" process type within rspc.
You are right thought, the DTP does not offer a facility to delete out the old loaded data. This feature is not in BI 7.0
As for scheduling a DTP to run daily, there's no way I know of to run it daily without rspc. Yes I understand that rspc could get very messy but just create a separate holding area, say DAILY DTPS and put your DTP's in there.
Cheers,
Pom

How to delete a compressed request?

I have a full update request in my material movements cube that I want to delete and then attempt to reload from the PSA. When I go into the cube, highlight the reqeust, and click DELETE I get the message "Request ID 0000055001 is aggregated, compressed or scheduled"
How can I delete it?
Thanks!

Hi Patrick,
You cannot delete by the request ID if it is compressed. The other option would be to attempt Selective deletion by cube contents, if you can accurately highlight or pinpoint the data loaded by way of this request. Selective deletion is irreversible.
Hope this helps...

How to delete old transfer requests

Hi,
I need to delete old transfer requests from dev, do you have idea, how to do it?
Thanks
Radka

Radka, If the transport request has not yet been moved up the chain, first you have to delete the individual objects after diplaying the request in SE09/SE10 that are in the request and then delete the request. It might give you a warning message that the object is currently locked but you can ignore that.
One word of caution, If someone else is trying to change the objects again in DEV please note that they will be changing the already changed objects in DEV which is not in line with what is currently in QA or PROD.
-Vinod Swarnapuri

How to delete a compresed request

Similar Messages

Maybe you are looking for