HOW TO DELETE A CONDITION TABLE??

HI
DOES ANYONE KNOWS HOW TO DELETE CONDITION TABLE?
THANKS

Vikas,
Do you want to delete a pricing condition table?
T-Code: V/04
In Change Mode, enter the condition table number and press enter. You can delete the condition table using menu Condition>Delete
If this condition table is part of a access sequence then you have to remove the table from the access sequence and then delete the table using the steps above.
Chandan

Similar Messages

  • Deletion of condition table

    Hi Guys,
    I created condition table, access sequence by using condition table ,created condtion type and used condition type in pricing procedure.  later becasue of some reason I need to remove the condition table. Hence, from the end I removed condition type in procedure, access sequence from condition type and table from access sequence.
    When I try to delete the condition table I am getting below error message
    "Message no. TK112
    Diagnosis
    The objects R3TR VKOI A803 und R3TR VKOS A803 cannot be edited together because the 1st object's original is in this system, whereas the 2nd object's original resides in another system.
    System Response
    The function is cancelled.
    Procedure
    Edit the two objects separately."
    Does any one help the reason behind the this error message and let me know how to delete the condition table.
    Thanks and Regards
    Chandra Sekhar Alokam

    Hello Chandra
    Firstly I would recommend not deleting the condition table. Let sleeping lions  lie, may be change its name to "Don't use" to avoid any unintended misuse. If you have removed it from access config, you should be fine. May be you are trying to remove even the traces of that  config.
    This issue is in the  Change Request (Transport) Management  area and ideally you should work with Basis guys.
    That said, check out this OSS note which is basically a Z-code to make the entries in TADIR to be same for VKOS and VKOI type of objects. There could be other related OSS notes contained within this, so check them out also.
    74453 - Problems changing condition table/info structure

  • How to Delete the condition record in CRM

    HI,
    Can you please help me how to delete the condition record from condition table in CRM.
    Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
    I have also read the documention of the function module. How to use this FM for custom defined condition table.
    (this is the code given in Documentation)
    DATA-OBJECT_REPRESENTATION         = 'E'
    DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
    DATA-SEL_OPT-OBJECT_TASK                    = 'D'
    DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
    DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
    DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
    DATA-SEL_OPT-RANGE-R_VALUE_LOW  = 'PROD_1'
    Thanks
    Shankar

    Hi Shankar,
    I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
    But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
    Error in  lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
    code:
    ls_range-fieldname = 'PRODUCT_ID''.
    ls_range-R_SIGN = 'I'.
    ls_range-R_OPTION = 'EQ'.
    ls_range-R_VALUE_LOW = '123456'.
    APPEND ls_range TO lt_range.
    MOVE lt_range TO ls_entry-SEL_OPT-range.
    ls_data-SEL_OPT-object_task = 'D'.
    ls_data-SEL_OPT-ct_application = 'CRM'.
    ls_data-object_representation = 'E'.
    CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
      EXPORTING
        DATA          = ls_date
    IMPORTING
       RETURN        = lt_return
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      IMPORTING
        return = lt_ret.
    Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

  • How to delete HFM Application Tables in SQL

    Hi Gurus
    1.How to delete HFM Application Tables in SQL?
    Manually its deleting but each application having 120-150 tables? how to do this in a single shot?
    I have deleted few applications using workspace/ shared services, but still its showing under HFM server under SQL Tables.
    Please help me
    regards
    Smilee

    Hi Smilee,
    1. If the application can be opened in Financial Management web interface, go to the Manage Taskflows module and make sure that no taskflows still exist for this application. Delete any existing taskflows.
    2. If the application exists in Shared Services, right click on the application in Shared Services and try to delete the application from there
    3. Stop Hyperion Shared Services and all Financial Management Windows processes and take backups of the relational database schemas of both.
    4. Check the relational database repository of Hyperion Shared Services, in the table "ces_apps" and make sure that there are no more rows containing the appname "EXAMPLE". If row still exists you should seek help from Oracle Global Software Support to clean up the Hyperion Shared Services before proceeding.
    5. It is possible to remove all content for a deleted application from the Financial Management relational database. Extreme care should be taken when manually manipulating database tables as permanent damage can be done to the intended application and other applications if the wrong content is deleted.
    a) Begin by deleting all tables, indexes, sequences and package objects that begin with the application name
    b) Delete any tables beginning HSV_appname_xxxxxx
    c) Delete any rows from the HSX_CLUSTER_xxxxx tables referring to the application.
    d) Delete any rows from the HSV_ACTIVITY_KILL_USERS, HSV_ACTIVITY_NO_ACCESS, HSV_ACTIVITY_SESSIONS and HSV_ACTIVITY_USERS and HSV_USERS_ON_SYSTEM that refer to the application name.
    d) Delete the row containing name of the application from the HSX_DATASOURCES table.
    6. The next time all the Hyperion services are started again, the application should be safely removed from Windows client.
    You can contact your DBA to write a query on how to delete it.
    Hope this helps,
    Thank you,
    Charles Babu J

  • How to change a condition table

    hello ,
    i want to change the condition table ex 909 with fields as SALES ORG/plant ,but here in my case the WITH VALIDITY PERIOD was unticked
    now i want to check that fied also ,but the system does not allow in the change mode of  the table
    can any one suggest me the way to check mark WITH VALIDITY PERIOD after creation of a condition type
    regards

    Hi vipin maheshwari
    As you want to delete the condition table first of all delete the condition table assigned to the access sequence then you  can delete the condition table
    Regards
    Srinath

  • How to populate the condition tables of CRM 7.0

    Hello Friends,
    How to populate values in CND* tables , i assume these are the tables that hold the conditions.
    Thanks and Regards,
    Vasu

    Hi,
    if you refer to CND* tables those are tables involved in the condition master data exchange between ERP and CRM (on CRM side). Actual condition tables for pricing related condition records start with CNC*. In the help there is a documentation of the condition master data tables for pricing available: http://help.sap.com/saphelp_crm70/helpdata/EN/0e/91f9392486ce1ae10000000a114084/content.htm
    Hope this helps.
    Best Regards,
    Michael

  • Reg:-How to delete PO from Table

    Hi,
        I need to know how to delete PO from the table.I know for item deletion.
    Edited by: Venkadesh on May 22, 2009 2:53 PM

    Hi
    PO's cannot be deleted from the table, we can only archive them from the data base being used.
    Deletion flag in the PO will not remove data from table.
    Thanks & Regards
    Kishore

  • How to delete columns in table control

    hi
    1) I have creted a table control with five columns
    now i want to delted the tow of the five coluent pls let me know how to delete it
    1) also i am useing a module pool programming (code if needed i will paste)
    in that the requirment is to select data from a ztable and aloow user to enter new ship to data only whne the corresponding records exists in kna1 table
    and to populate the name1 value automatically from table kna1 whne user enters ship to number
    pls suggest
    regards
    Arora

    Hello,
    Requirement 1
    i believe you need to delete a row from the control table based on the user input...
    if thats the case then definitely in the control table the multiple line selection will be activated .
    in PAI of the control table screen...
    if user has clicked delete.
    loop at control table records..
    if the selection code for the line is 'X'.
    Delete from the internal table.
    endif.
    endloop.
    endif.
    Requirement 2..
    i will give an outline on the checks
    a)first let the user enter the data...in the PAI of the screen...write the code to do the checking....if your requirement is not satisfied provide a warning/error  message or delete the record and give a message stating the reason for deletion...
    in PAI.
    for a control table...
    loop at the table records
    select from table and check if user record is O.K
    if not delete the record and give message
    endif.
    endloop.
    b)similarly inside the PBO write code to fetch the name1 from Kna1 table for the ship to number if that ship to number is not empty
    in PBO of that screen
    if  ship_to is not initial.
    select text for ship_to number to the display field
    else.
    clear the display field
    endif.
    reward if the suggestions were useful
    Regards
    Byju

  • How to delete a customize table

    HI,
    I need to delete a customize table . But while trying to delete the table it's showing a message " Still used in dictionary. can't delete'. because this table is used by some programs and search helps. How to delete the table?
    Thanks & regards
    sandeep

    Thanks for ur rely! but deletion of table is only possible when it refer  to nothing or refers to only abap programs  . Because my program refers to some search helps and screens and programs i am not able to delete it.  Even in SE56 and SE57  showing the same message.
           Is there any way to delete the table with out affecting the programs and search help( without commenting the part of programs that uses tha table and deleating the search help).
        Is it possible to create anather customize with same attribute and fields and replacing the new table with old table.
    Thanks @ Regards
    sandeep

  • How to delete a Taxonomy Table?

    I am not able to delete a Taxonomy Table. Can any one tell me how to delete it?

    Hi,
       To delete taxanomy table, go to MDM Console, Login in to your Repository, unload repository, then click on Repository it will show all tables, select taxanomy table Right click on it, then delete table.
    Hope it works
    Regards,
    Mandy

  • How to delete record from table control using BDC?

    Hello friends,
    I am running a BDC program to delete records.
    I have file with following records and i got these records into t_itab.
    Material     Plant     Start date     End date     Cost
    MQ100001     S001     09/01/2008     09/31/2008     55.00
    MQ100004     S002     09/01/2008     09/31/2008     56.00
    MQ100008     S003     09/01/2008     09/31/2008     57.00
    Now, I have BDC transaction in which table control screen which contains following structure.
    MQ100001     S001     09/01/2008     09/31/2008     55.00
    MQ100002     S002     09/01/2008     09/31/2008     56.00
    MQ100004     S003     09/01/2008     09/31/2008     47.00     
    MQ100005     S004     09/01/2008     09/31/2008     25.00
    MQ100006     S012     09/01/2008     09/31/2008     76.00
    MQ100007     S033     09/01/2008     09/31/2008     17.00
    MQ100008     S011     09/01/2008     09/31/2008     95.00
    MQ100009     S002     09/01/2008     09/31/2008     46.00
    I have recorded from SHDB in which first record will be delete.
    So, when i loop through t_itab,instead of deleting MQ100001,MQ100004 and MQ100008 from BDC screen,
    it is deleting MQ100001,MQ100002 and MQ100004 (first record for each process ).
    Which i don't want to.
    Is there any facility in BDC to put records on top which i want to delete?
    Please guide me.
    Regards,
    RH

    One option is to identify the table and find out the location as the number of row which should be deleted from the table and then in the bdc program instead of postioning the cursor on the row 1(using the statement perform bdc_cursor ....(01)), replace the 01 with the row number.
    Second option is that if a filter control is available for the table control, then filter the data each and every time with the material number to be deleted and then delete the first row.
    Regards
    Farzan

  • How to delete the source table rows once loaded in Destination Table in SSIS?

    Data Base=kssdata
    Tables= Userdetails having 1000 rows
    Using SSIS: 
    Taking A  
    OLE DB Source----------------->OLE DB Destination
    Am Taking 200 rows in Source table and loaded into Destination table once
    Constraint: here once 200 rows are exported in destination table , that 200 rows are deleted in source table
    repeat the task as source table all the records are loaded into Destination table 
    After that am taking another 200 rows in source table and loaded into Destination table

    Provided you've a sequential primary key  or audit timestamp (datetime/date) column in the table you can do an approach like this
    1. Add a execute sql task connectng to source db with below statement
    SELECT COUNT(*) FROM table
    Store the result in a variable
    2. Have another variable and set it to below expression
    (@[User::CountVariable]/200) + (@[User::CountVariable]%200 >0? 1:0)
    by setting EvaluatesExpression as true. Here CountVariable is variable created in previous step
    3. Have a for loop container with below settings
    InitExpression
    @NewVariable = @CounterVariable
    EvalExpression
    @NewVariable > 0
    AssignExpression
    @NewVariable = @NewVariable - 1
    3. Add a data flow task with OLEDB source and OLEDB Destination
    4. Use source query as
    SELECT TOP 200 columns...
    FROM Table
    ORDER BY [PK | AuditColumn]
    Use PK or audit column depending which one is sequential
    5. After data flow task have a execute sql task with statement as below
    DELETE t
    FROM (SELECT ROW_NUMBER() OVER (ORDER BY PK) AS Rn
    FROM Table)t
    WHERE Rn <= 200
    This will make sure the 200 records gets deleted each time
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • How to delete the database table

    hi all
    i want to delete the data  from the custrmize table so if u can heilp me to do that....not the internal table ..i write the code but that using that code i can delete only one raw.. but i want to delete all raw in my table..
    ZLAB_SUBMIT-SHADE = '1'.
    ZLAB_SUBMIT-SUBMIT = '1'.
    ZLAB_SUBMIT-RM = 'RINGS'.
    ZLAB_SUBMIT-REMARKS = 'Approved'.
    ZLAB_SUBMIT-AP = ''.
    ZLAB_SUBMIT-USNAM = 'INDIKAF'.
    ZLAB_SUBMIT-CPUDT = '05.10.2006'.
    ZLAB_SUBMIT-CDATE = '05.10.2006'.
    ZLAB_SUBMIT-CPUTM = '21:29:19'.
    DELETE  ZLAB_SUBMIT.
    regard
    nawa
    this is my code....

    Hi,
    data itab type standard table of zlab_submit.
    select * from zlab_summit into table itab.
    delete zlab_summit from table itab.
    Kindly reward points by clicking the star on the left of reply,if it helps.

  • How to delete data in table control

    Hi,
    I am doing module pool programming. After the user enters the data in table control after saving the data. if the user wants to  remove the line item the line item shd be removed from the screen and data base.
    Please Give me vaulable Suggestions
    Regards

    Hi,
    Screen 8002 (with table control) --> select records --> press delete button --> delete selected records
    Now you wan to delete those records selected by the user at runtime when DELETE button is clicked.
    Take another internal table and work area same as the initial internal table and work area used in screen 8002 which is to be used to delete the selected data.
    Take the names of the input/output fields as work_area-field_name and select column in table control as work_area-flag.
    Also take a flag field of size 1 datatype character as the last field in the internal table and work area while declaration.
    You must have passed a code in PBO of the screen for reading internal table into the table control.
    So it reads the internal table into the table control whenever you perform any action on use command.
    All you need to do is to write a code to modify the internal table form the table control while performing any user action.
    Remember to change the LINE SEL option in attributes of table control as MULTIPLE.
    At screen logic,
    PROCESS BEFORE OUTPUT.
      MODULE status_8002. "for pf-status
      LOOP WITH CONTROL po_tab. "po_tab is table control
        MODULE pass_data. "to pass data into table control from internal table
      ENDLOOP.
    PROCESS AFTER INPUT.
      MODULE user_command_8002. "for user command(back and exit)
      LOOP WITH CONTROL po_tab.
        MODULE modify_data. "to modify data from table control into table control
      ENDLOOP.
      MODULE delete. "to delete the selected records
    In PBO,
    *&      Module  STATUS_8002 OUTPUT
    MODULE status_8002 OUTPUT.
      SET pf-status 'ZAB_PFSTA'. " pf-status
      DATA : line_count TYPE i.
      DESCIRBE TABLE it_ekpo
      LINES line_count.
      po_tab-lines = line_count + 10.
      " to make table control scrollable
    ENDMODULE.                 " STATUS_8002  OUTPUT
    *&      Module  PASS_DATA  OUTPUT
    MODULE pass_data OUTPUT.
      READ TABLE it_ekpo into wa_ekpo INDEX po_tab-current_line.
    ENDMODULE.                 " PASS_DATA  OUTPUT
    "it_ekpo is internal table and wa_ekpo is the work area
    In PAI,
    *&      Module  MODIFY_DATA  INPUT
    MODULE MODIFY_DATA INPUT.
      MODIFY IT_EKPO INDEX PO_TAB-CURRENT_LINE FROM WA_EKPO.
      "modify records from table control into the internal table
    ENDMODULE.                 " MODIFY_DATA  INPUT
    *&      Module  DELETE  INPUT
    MODULE DELETE INPUT.
      OK_CODE = SY-UCOMM.
      CASE OK_CODE.
        WHEN 'DELETE'. "when delete button is clicked
          SORT IT_EKPO BY FLAG DESCENDING. "sort by flag(selection column value)
          CLEAR WA_EKPO1.
          CLEAR WA_EKPO.
          REFRESH IT_EKPO1.
          LOOP AT IT_EKPO INTO WA_EKPO WHERE FLAG = 'X'.
            DATA : J TYPE I.
            CLEAR J.
            J = SY-TABIX. "assign index value if a record is selected
            MOVE-CORRESPONDING WA_EKPO TO WA_EKPO1. "append selected records to another
            "work area and append to another internal table to delete
            APPEND WA_EKPO1 TO IT_EKPO1.
            DELETE IT_EKPO. "delete the selected records from initial internal table
            " to reflect the changes on the table control
          ENDLOOP.
          IF J = 0.
            MESSAGE I006. "if no record selected
          ELSE. "if some records are selected
            DELETE ZEKPO FROM TABLE IT_EKPO1. "delete from database table
            COMMIT WORK.
            IF SY-SUBRC = 0.
              MESSAGE S007. "success message (records deleted)
            ENDIF.
          ENDIF.
      ENDCASE.
    ENDMODULE.                 " DELETE  INPUT
    Now at PAI, you have delete records and these changes are reflected back to the internal table.
    Now when PBO is executed it will again read the initial internal table and will not show the deleted records.
    Hope this solves your problem.
    Thanks & Regards,
    Tarun Gambhir

  • How to delete columns in table control (tab Services) for transaction ME51

    Hi, gurus!
    We're facing this problem in our upgrade: we have a batch input (ME51) in order to create purchase requisitions, but we get an error with the dynpro data (program: SAPMM06B, dynpro: 0102).
    We are sure we populate all the required fields in that screen.
    The only possible reason we find for that error is the fact  that we have two new entries in table control (in tab services=> Current settings there are 67 fixed columns)
    We had to add in table T162V (which previously had only 65 columns for each variant): ESLL-SRVMAPKEY y ESLL-EXTERNALID, as described on note 1382685, so table control and table T162V could have same number of fields.
    We guess we could solve the batch input error deleting those fields in both table control and T162V, but don't know how.
    We really would appreciate any clue.
    Thanks in advance.
    Best regards,
    J. Madariaga

    It's an own batch input.
    The error is: "Batch input information for dynpro SAPMM06B 0102 does not exist", but the fields in that screen are alright.
    And that batch input works fine in another client with same patch level, but without fields ESLL-SRVMAPKEY and ESLL-EXTERNALID in table T162V, so I guess that could be the problem (not sure about it, of course).
    Regards,
    J Madariaga

Maybe you are looking for