How to Delete a Failed Master Data Delta Load ??

Hi all,
   The Delta update load for 0VENDOR_ATTR is failed. I have changed the TOTAL traffic light in Status tab of Monitor to 'RED' and clicked 'yes' on the next pop-up screens.
     After activating the Transfer Rules, I have tried to load the Delta again and it failed with 'Update mode R is not supported by the extraction API
R3 (Id) 11 (No.)' . The long text says 'The application program for the extraction of the data was called using update mode R . However, this is not supported by the InfoSource.'
   How can I fix this problem so that I could load delta, PLEASE?
Thanks.

Hello Venkat,
How r u ?
I just found this; check all the Threads under the topic
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-bw/update-mode-r-is-not-supported-by-the-extraction-api-949241
Have a look at OSS 427812.
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

Is there settng source system level for master data delta loading perfo

Hi Viwers,
Good Morning,
I am loading data from the source to target level for Master data it is taking too much time,I would like to know the how to increase the master data delta loading performance.
I would like to know the source system level is there any setting requited & target system level also.
Please give your inputs..........
Thanks & Regards,
Venkat Vanarasi.

Venkat -
Are u deleting the indexes of data target before delta loading ? If not,delete the indexes of data target before delta loading and recreate them after delta loading is done.This procedure increase load performance.You can perform whole procedure in process chain.
Anesh B

Master data delta load failure

hello Friends,
Today i have faced cost center master data delta load failed in my project.
The error is - Requesting the last delta for master data is not supported.
As it is delta load, I have followed below steps.
1. Request made forcefully red.
2. Triggered same infopackage and load completed successfully.
friends, can you please outline the error and why it has came, as i have checked OSS notes but still not able to find exact notes for it.
As i have to give the reason to the clilent , please your help weill appriciated.
Please suggest me this error belongs to , and why it came.
s it is completed sucessfully still i have to give details to my client.
Regards,

Hi,
There r lot of reasons to fail the master data load, the error which u got was because of failure in the source system.
<i>The error is - Requesting the last delta for master data is not supported.</i>
This is due if a delta is still running then it gives that message, u have to check whether it is running in the source system, if not u can make it to red then repeat the load.
for checking follow the menu path from monitor ---evironment->job over view->in source system, there u have to enter the user id password it will take to directly SM37 with that job name.
Hope it helps.
Regards
Siddhu

REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS

Hi Guru's,
REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS?
AS I AM NEW TO SAP-BI CAN ANY ONE GIVE THE DETAIL EXPLANATION ON IT.
IT WILL BE GREAT AND HELPFULL.
Thanks and Regards,
CM

Hi CM,
yes you can perform the repeat delta even for the master data if the datasource which was supplying the data was delta capable.
You can do the repeat delta only in case if your previous request was erroneous and dont forget to make the request red in the status,so that system will treat like you are requesting the failed request once again where in case you will miss the previous request, i,e erroneous request if you dont make the request red.
when you make the request red manually in the status,the pointer will move to the previous request once again in the delta queue and there will be no chance of missing the delta records.
This process was same for both transaction as well as master data.
Regards,
Sunil...

Master Data Delta Load failing

Hello,
We have a master data process chain that does a delta load of 0MATERIAL_ATTR, OMATERIAL_TEXT etc....
On 3/26/06 at 8:15 pm was the last time this process chain ran successfully.
On 3/27/06 at 8:15 pm the process chain failed on the first step: 0MATERIAL_ATTR (Delta Update) and thus did not process furthur.
The reason the chain failed was because the message server was down, so no BW requests were successful. i have all my other data loads running correctly now. So this Master Data problem is the last mystery I need to figure out.
When I look at the monitor for the failed 0MATERIAL_ATTR (Delta) I see a message that says "Non-updated Idocs found in Source System"
When I click 'Process manually' in the monitor. it says 'incorrect data packets are now updated again'
The chain was attempted to be ran on 3/28/06 at 2:25 pm and it failed again at the same step. The message in monitor this time was 'Sending packages from OLTP to BW lead to errors'
The chain was again attempted to be run on 3/28/06 at 5:06 pm. Again it failed at the same step. the message this time was 'Update mode R is not supported by the extraction API'.
I tried to manually run the infopackage outside of the chain and I got this message when I clicked 'Start'. "the last delta update was incorrect" Therefore, no new delta update is possible. You can cancel the request or: Attempt to load the data of the last delta update again." I click 'Request again' and I get the message: 'Update mode R is not supported by the extraction API'.
All of these loads transferred 0 records and failed.
Any advice on how I can get my master data on track again?
Thanks,
Nick

Hi Nick,
I would suggest that you do a full load to get all the data and then ReInit the process. Since it is master data, the full load and ReInit is possible with no major issues.
Re: Update mode R is not supported by the extraction API
Hope this helps...

Master data delta load failed

Hi All,
Delta load for 0MAT_PLANT master data failed and the error message in monitor is "there are duplicate records (with same key)". 0MAT_PLANT is coumpounded with 0PLANT. I checked in PSA and there is more than one record with the same key (0MAT_PLANT & 0PLANT). My understanding is master data has to be replaced if a new record comes in with same key as the previous one. I am not sure how to correct this and finish the load.
Can anyone throw their inputs?
Thanks,
Kim.

0MAT_PLANT is sourced from table MARC in R/3. Keys in MARC is also Plant and Material just like th eInfoObject 0MAT_PLANT.
Check table MARC in R/3. If that also has duplicates and you want to get the data load through, then load to PSA and upload from there ignoring duplicates.

How to Delete Requests for Master Data Target

In BW 7.0 (SP24) I'm struggling with a time dependent master data process chain load using BI 7 load methods (Transformation / DTP). The unique aspect of this is that we are required to start the process chain with an ABAP that deletes the master data. (RSDMDD_DELETE_BATCH). So a "Full" load is necessary. And we have to remove the previous PSA and Requests so that the DTP won't attempt to load (and ignore) the previous PSA.
While deleting the previous PSA request is a straightforward operation in a process chain, there does not appear to be a function allowing us to delete the requests from a Master Data object. (info cube and OSD/DSO only).
Does anyone know of an existing ABAP or Function Module that we can use to delete the existing requests from our object before we run our load processes ?
Many thanks !

Try the FM "RSDMD_DEL_MASTER_DATA".
But before deleting the master data you have to make sure that this master data is not used anywhere i.e, delete all the transactional data first.
U can also try RSDMD_DEL_PARALLELIZER

Error during master data delta load

Hi All,
I am loading delta master data to an info object 0DPM_DCAS through a flexible update.
Received an error "101 data records in table /BI0/XDPM_DCAS marked for deletion...
158 duplicate record found. 126 recordings used in table /BI0/XDPM_DCAS" at the Update level.
The status is red. There is no additional info in the Error Message button.
Also subsequent deltas cant be triggered and it says "Repeat cant be requested".
Please suggest an explanation and an way out.

Hello VishNo,
How r u ?
This error is because of the Duplicate records existing in the InfoObject. Also, seems to be the problem in the Master Data Time independent navigational attributes table. Check the data and also the Monitor screen Details Tab entries & come back again.
Best Regards....
Sankar Kumar
+91 98403 47141

0material master data delta loading

Hi,
Could anyone let me know how can i check in R/3 side if 0material delta laoding getting 0 record?
What I mean is that: we have a process chain loading all master data, including "0materail" Material Number(0MATERIAL_ATTR), and Product number(0MATERIAL_TEXT).
and it runs once a week.
this week, I noticed that there is both 0 records has been laoded from R/3 to BW for both (0MATERIAL_ATTR) and (0MATERIAL_TEXT) delta load. while teh other master data load runs normal, get records as normal.
But i am not sure how to check in R/3 side, to ensure whether there are some new records created during this week or not.
which transctiion and table i should check.
Please advice,
Ping

Check there is any Selection criteria in the Infopackage data selection tab. if you have any selection provide the same selection in MARA.
If you don't have any selection and if u won't see records in RSA3 means... some problem with extractor.
all the best.
Regards,
Nagesh.

MAster Data - Delta Load Error?

Hi,
I am having error in 0COSTCENTER delta load. In the Info Package of 0COSTCENTER, it was not selected to PSA. It was selected to InfoObject directly.
Since this is a delta load for Master data, how can i correct this error?
Thanks!
Venkata

Hi Venkat,
You can done a full upload without affecting Delta upload. Make a test on Dev or Qual and you will see that a full on Master Data does not stop delta process.
Ciao.
Riccardo.

0 records in master data delta loads.

We have activated delta on 0CUSTOMER_ATTR and verified the queue is active in RSA7. However the delta load is not fetching any records. A full load, however, does. I have deleted and reactivated the delta init multiple times with no success
The infopakage error monitoring status has the following messages
<i>No new data since the last delta update
Diagnosis
The data request was a delta update, meaning, the data basis in the
source system has not changed since the last update.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.</i>
Thanks in advance.
D

hi ok first check what Ajay said the BD61 if it is activated in R3.
After that go to roosgen fill in the name of the DS 0custmer_attr select the line with the R3 from which you want to extract data.
Copy the message type.
Then after you have made the change (update or creation) go to table cdhdr and cdpos to get the change doc object, table name and field name.
After that go to bd 52 paste your message type and add the entry for in your case for the phone number in communication tab
chge doc ADRESSE table : ADR2 field name : TEL_NUMBER
Launch the delta it should work.
In fact when you go to bd52 you will see the fields that are entered for the fields to be taken into consideration when an update is made (they are mainly based on the chge doc obj DEBI) so if you need more fields add them in function of your needs and the info you get in cdhdr and cdpost when you do changes. You can do this only manually so take care of repeating these steps in QA and in prod.
Hope this could help you to solve your issue.
regards
Boujema

Master data delta load issue

Hi Expert,
We have recently enhanced a Master Data object with 3 fields. These fields are directly mapped from a DSO. When the delta load is done, these 3 fields are not getting the data, while a full(selective) load gets the data and the 3 fields get populated. What can be the reason for this?
Thanks,
Anupama

Hi,
Then if data already updated to info object through full load, again if you run delta dtp for the same its not fetch any records, so after full load, initiliaze the delta dtp, In DTP in exectue tab you will select processing mode as select option : No data transfer delta status in source is : fetched, aftet that you can run your regular deltas. it will work.
Regards,
satya.

How does Master Data delta works.

Can any body please explain me what is data flow in master data delta.Are the ale change pointers utilised , if yes how..And is delta queue used in master data delta.

Amit,
As you may be aware of this, ALE Change pointers are used to minimize the no of records to be sent to the extracting systemextractos. in other words the master data delta is been handled this way. It is better that you read the following that should be giving you some idea.
http://help.sap.com/saphelp_47x200/helpdata/en/84/63b320b55bf540aee7a40b225cda50/frameset.htm
Hope this Helps.
Alex.

How the master data delta works

hi, experts
i want to know how the master data delta (ale pointer) works? what the principle is? for example, the 0asset_attr datasource has 20 fields, any of the 20 fields changes can triger the delta? if i enhance 3 fields to the asset master data, does the 3 fields change can trigger delta?

Application Link Enabling (ALE) change pointers are configured and used to be able to trigger processing of an outbound process, such as data extraction, and determine only those Master Data records that have changed. This is all done without the need for a program being required to determine deltas.
SAP delivered program, RBDMIDOC runs periodically and deterlines if change pointers have been updated for specific message types. New or modified Master Data records are automatically initiated via ALE. RBDMIDOC references the correct IDoc program for any given type via TBDME (the TBDME table also cross-references message types with the ALE change pointer table) so that the data goes where it should and is processed accordingly. Tcode BD60 is the interface in SAP for maintaining the TBDME table.
When a change is made to the standard content Master Data record, the delta will be identified. Any columns that have been enhanced to the Master Data will not be identified as a delta because enhancements are a post-extraction process and only get updated after the standard content structure has been populated.

Standard method to archive/delete all vendor master data

Hi every abap expert
Does anyone know how to archive all vendor master data
in a client?
If use T-code : SARA . The vendor master data is required to mark deletion flag before archiving.
Any standard T-code can set all vendor master data with marked deletion flag ?

Hi Boris!
Give XK99 a try. With XK06 a single change is possible and in FI also FK06 is available.
When XK99 has problems with field LFA1-LOEVM, then you can make easily a CATT for XK06.
Regards,
Christian

How to Delete a Failed Master Data Delta Load ??

Similar Messages

Maybe you are looking for