How to delete a field from already created search help

hi
i got a requirement that delete a search help field which is already delivered
regards
krishna

Hi Krishna,
1. Go to SE80 and Enter the Package name
2. Dictionary objects --> Search helps ---> select ur Srarch help[double click it]     --->  CTRL + F1.
3. Then remove the unwanted fields.
Thanks,
Reward If Helpful.

Similar Messages

  • How to delete a field from search help which is delivered

    hi
    I got a requirement to delete a field from search help which is delivered long back
    Regards
    krishna

    Hi
    Whether it exists in DEV system or not?
    Take the name of that Search Help from PRD/Quality(if it is not there in DEV system) and modify/change it by removing that field from the search help in DEV system and create a Transport request and transport the same request to Quality/PRD systems
    Now the New changes (in which the field was removed) will be over written on the old search help in the PRD system, since it is the same Name (search help)
    Regards
    Anji

  • How to add a field in elementary standard search help ? (H_T012)

    Hi everyone,
    I need to add a description field in the standard H_T012 search help, I know that collective search helps can be modified by appends, but, how can it be done in an elementary search help ?
    Thanks on advance,
    VSwaret

    hi swaret,
    i tried ur problem.....
    nothing special as to be done to add a new field in elementary search........
    just press F4 at parameters.
    there are already 4 fields...
    BUKRS
    HBKID
    BANKS
    BANKL
    you just add ur field.....
    TEXT1
    and specify Lpos and Spos as 5.
    and activate...... thats all......
    i tried and it worked for me........
    i hope it was helpful for u.

  • How to delete invisible fields from screen painter SE51?

    Dear all,
    How to delete/remove invisible fields from screen painter SE51?
    Thanks.

    HI,
    just go to screen painter-->layout in change mode.
    the invisible fields will be looking faded
    click on that and press the DEL button.
    that will be deleted.
    <b><REMOVED BY MODERATOR></b>
    vivekanand
    Message was edited by:
            Alvaro Tejada Galindo

  • How to delete a field from a Dynamically created internal table

    Hi friends,
    I have got a requirement in which, I will be entering the table name and Excel file from seletion-screen.
    based on the Table I have entered in the selection-screen I need to create a dynamic internal table so that I can fill that Execel data into that internal table and later i using BDC i can I can fill the database table using SM30 transaction.
    here. my problem is that, When I am creating internal table dynamically, MANDT filed is also getting created in the internal table.
    please, help in deleteing the filed MANDT from the internal able.
    following is the code which creates the dynamic internal table.
    CREATE DATA dy_table TYPE TABLE OF (p_tabname).
    assign dy_table->* to <dyn_table>.
    please provide, if any sample code is available.
    Regards,
    Xavier.P

    Hi,
    You can use this logic,
    While creating the Dynamic filed catalog try to avoid MANDT field.
    Ex:
    *Dynamic creation of a structure
      CREATE DATA LP_STRUCT TYPE (V_TABLE).
      ASSIGN LP_STRUCT->* TO <FS>.
    *Fields Structure
      OF_SDESCR ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_DATA( <FS> ).
    LOOP AT OF_SDESCR->COMPONENTS ASSIGNING <COMPONENTS>.
    *Field MANDT not displayed
        IF SY-TABIX = 1 AND <COMPONENTS>-NAME = 'MANDT'.
          CONTINUE. " Next loop
        ENDIF.
    *Build Fieldcatalog
        LS_LVC_CAT-FIELDNAME = <COMPONENTS>-NAME.
        LS_LVC_CAT-REF_TABLE = V_TABLE.
        APPEND LS_LVC_CAT TO LT_LVC_CAT.
        CLEAR LS_LVC_CAT.
      ENDLOOP.

  • How to delete customized field from an infotype

    Hi All,
    I have created a customized field in standard infotype.Now i want to remove that field. Can anyone pls send me procedure to delete the customized field.
    Thanks
    Partha.

    u can use transaction se11 to delete the corresponding customised domain, data element etc. (if any), and finally delete the structure CI_Pnnnn.
    if u have already input data in the field, u have to firstly delete these data.
    Kind regards,
    Echo

  • MM17 Delete a Field from this Transaction

    Hi,
      Could someone tell me how to delete a field from the MM17 transaction code.
       Please let me know if this is feasible.
    Thanks & Regards,
    YJR.
    Message was edited by:
            YJR

    Hello,
    I think it is not possible to delete fields or add tables in MM17.
    Vasanth

  • How to delete my Video from Skype?

    Hello, I just want to know how to delete a video from Skype?  Please help me asapif you can.

    Are you using Skype For iPad ? If you want to delete conversation history then (from https://support.skype.com/en-us/faq/FA10638/How-do-I-use-Skype-for-iPhone#9) :
    To delete your conversation history:
    Tap History > Edit.
    Tap the edit icon next to the conversation you want to delete.
    Tap Delete.
    Or do you mean something else ?
    There is help for the Skype For iPad app here : https://support.skype.com/en-us/category/SKYPE_FOR_IPHONE/

  • How to use the created search helps in the program?

    Hi Everyone,
    I know how to create Search help elementary / collective search help through SE 11. I have a question, how can I make use of the created search help in the program.
    How to use the Search help in the programs, which is created through SE11
    Subbu.

    Hi,
    In case if you want to use in parameters statement, then we can use the suffix MATCHCODE OBJECT syntax.
    Eg.
    report abc.
    parameters : a(10) type c matchcode object ZBELNR.
    Hope this helps.
    regards,
    amit m.

  • How to delete the values from TKOMV at runtime after creating PO

    Hi,
      How to delete the values from TKOMV at runtime after creating PO from IDOC. I am creating PO through IDOC, subsequently need to create Sales order and again need to create 2nd PO with reference of Purchase Requestion(created with sales order). At the time creation of 2nd PO the Header conditions are appearing twice and net price value is appearing wrong.
    Thanks in advance.

    Hi Padma
    Can you do this activity once the company code is in to production. I guess you can not do this activity, if the company code is already in to live. Setting or resetting of the recon accounts will hinder the previous actitivity. Infact resetting of the company code is also not a good option.
    Any how, thanks for the inputs. Please let me know whether i can do this activity only at the subledger level which will not impact other modules. The one solution i can figured out is , reverse all the transactions for the corresponding asset in the year of takeover and pass the entries again in the same year correctly which will have effect in Subledger and also in general ledger. But the business people will not allow this, since for a big client it will require lot of authorizations and approvals. Infact the vendor also, is cleared. So we have to reverse the cleared documents as well which is again a task and require approvals as well.
    Thanks and regards
    Seshu.

  • How to delete the messages from SXMB_MONI which are already cancelled .

    Hi All,
    The messages were earlier in System error(Red flag) state so i cancelled it manually.
    I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
    if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
    can any tell me the procedure of doing it.
    thanks
    Sai.

    Hi AmitSri,
    Thanks for u r reply,
    What is retention period, where can i find this option.
    And i don't have authorizations to sxmb_adm --> configure delete procedure
                                                                             --> Define interfaces for archiving and retention period.
    and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
    Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
    Thanks
    Sai.
    Edited by: sai_SHA on Aug 17, 2011 12:29 AM

  • Getting Error while deleting a field from the 'Z' Structure

    Hi All,
    I have created a 'z' structure in which i have 5 fields, now i want to delete one field from the structure, but it is giving me error like Invalid Change.
    Its a structure so i cant activate and adjust as we do for Tables.(se14)
    So pls help me out asap.
    thanks & Regards,
    Dhruv Shah

    Thanks for Quick Reply.
    I have not used this field in any FM/ Report.
    I have tried log off and then log on. but it make no difference.
    Now the Other scenario is that i want to change the datatype of this field to TEXT25.
    But it is also not allowing me to change because currently datatype is TEXT20.
    So now how can i change the length from 20 to 25.
    Regards,
    Dhruv Shah

  • How to delete multiple rows from ADF table

    How to delete multiple rows from ADF table

    Hi,
    best practices when deleting multiple rows is to do this on the business service, not the view layer for performance reasons. When you selected the rows to delete and press submit, then in a managed bean you access thetable instance (put a reference to a managed bean from the table "binding" property") and call getSeletedRowKeys. In JDeveloper 11g, ADF Faces returns the RowKeySet as a Set of List, where each list conatins the server side row key (e.g. oracle.jbo.Key) if you use ADF BC. Then you create a List (ArrayList) with this keys in it and call a method exposed on the business service (through a method activity in ADF) and pass the list as an argument. On the server side you then access the View Object that holds the data and find the row to delte by the keys in the list
    Example 134 here: http://blogs.oracle.com/smuenchadf/examples/#134 provides you with the code
    Frank

  • How to delete multiple playlists from itunes

    how to delete multiple playlists from itunes?

    Have you subscribed to iTunes Match? There is a bug that can sometimes create hundreds of duplicate empty playlists. I've two scripts which might help you clean up: KillEmptyPlaylists and KillTopLevelPlaylists. This post describes a technique for resetting iTunes Match to stop it happening again.
    tt2

  • How to hide a field from table maintenance view?

    Hi,
    How to hide a field from table maintenance view? 
    The field is used for data created date. I need to hide it from display.
    Thanks

    Chk this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/33f52010dd11d6999300508b5d5211/frameset.htm
    Maintenance Attributes
    You can assign a maintenance attribute P to individual fields in the maintenance view definition in the Dictionary (SE11). It can be  H (hidden)
    H (hidden)
    A field flagged H is not displayed on the screen. This field must also be filled in the background by a routine at an event.
    The system writes R and H fields to the database like all other fields when a new data record is saved.

Maybe you are looking for

  • Small Icon sizes in Open Dialog Box

    When I upgraded from Snow Leapard to Lion I was very impressed that the icon sizes in the File->Open dialog boxes varied in size (per folder) on how you viewed them in Finder. For example, I would set my Finder Pictures folders and contents to a larg

  • How outbound idoc of message type WMMBXY is created? any program or FM name

    Hello Gurus, How outbound idoc of message type WMMBXY is created? any program or FM name?? basic type : WMMBID01... i checked the idoc in my system, it does not have any process code.... also, i checked the exit : EXIT_SAPLMBMB_001. It has some code

  • Develop Mode problems

    I have just downloaded LR5 & trying out the develop mode. Don't know how it happened but lost the 'basic' menu in develop mode, how can I gewt this back?

  • Simple Tween Component

    I have been working on (what should be) a VERY simple component/compiled clip. The component will allow for setting actionscripted tweening for movie clips. It's so basic that I opted not to even use a class and it uses all internal actionscript. The

  • Logic pro x keeps crashing when uploading

    Logic Pro X keeps crashing whenever I want to upload or bounce my track. So I won't get a audio file of it, which means it's just in Logic and I can't share it with anything or anyone. It starts bouncing but it closes logic when it's about half done