How to Delete a Hyper Set - Help!

Has anyone had any success in deleting a HyperSet? I have tried the actual command to "Clear" hyperset, but all that does is to leave you with a blank "canvas", so to speak. The name changes to "MIDI Controls". Now I have a drop down list of "MIDI Controls". I have found no way to remove those other than to recreate a brand new autoload.iso. However, if you try to import the Hypersets from other songs, all the ones I don't want, end up importing also. I just want a simple way to "delete hyperset".
Thanks,
Jack

hi chris
thank you for your time.
i have read what little i can find about the preset manager. i cannot find any info on how to Delete.
was just returning to say i figured out the save thing from the manual ... which oddly... is hard to find b/c when i click on Photoshop CC manual ... nothing about Patterns is listed.

Similar Messages

HOW TO DELETE PARTICULAR TRIPLE SET FROM Oracle SEMANTIC TABLES in 11g

Can somebody help us how to delete a particular set of triples from Oracle(11g) semantic that we have. Because we noticed that few triple belongs to particular data sets were wrongly loaded so we need to remove only those triples.
Usually we delete all triples including others such and reload them again along with new triples. We would like to avoid this as we go to production.
Otherwise When we insert a set of triples belongs to a particular data set, is it possible to know what ids Oracle assigned to that set? Can we delete by id? Just a thought.
Rgds
Srini

Hi,
It is very strange. I got an email in my inbox saying that you want to find out
IDs of triples that belong to RNAIDB data set like the following.
"<http://www.lscdd.lilly.com.sg/lscdd/RNAIDB/...../.../:>".
This forum does not have your message somehow.
Assume you have asked such an question :), my answers are
1) from a modeling perspective, it is not a very good idea to encode
semantics in the URI lexical form itself. A URI should be treated
as a symbol.
2) now assume you have a valid reason for doing this, you can try something like the following.
CREATE INDEX testdel_sub_idx ON tstdel (triple.GET_SUBJECT());
-- You can then get the rowid out for those offending rows.
select rowid
from tstdel t
where t.triple.GET_SUBJECT() like '<urn:su%'
-- Or you can remove them directly.
delete from tstdel t
where t.triple.GET_SUBJECT() like '<urn:su%'
;

How to delete a RAID set in Disk Utility?

I set up a mirrored RAID set with two 80GB disks on a 500MHz G4 "sawtooth", then installed Tiger successfully. Statup Disk on the Tiger DVD recognizes it as a valid startup disk, but it won't boot (stays on the white screen with the large apple).
So, I decided to go back to two separate disks with no RAID, but Disk Utility won't seeem to let me delete a RAID set. It shows the volumes as locked (no apparent way to unlock them), and also doesn't allow me to format the underlying drives (bad file descriptor error).
Any suggestions on how to undo a RAID set in Tiger?
Thanks,
0g
G4 "Gigabit" Dual-500 Mac OS X (10.4.8) 1.5GB RAM, 1TB internal, SCSI, 802.11g, USB2.0

Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. After the menubar appears select Disk Utility from the Utilities menu (Installer menu for Panther.) After DU loads select the main entry of the RAID (the one with the RAID size) then click on the RAID tab in the DU main window. Select the main RAID entry from the icon list (the one that says "Mirrored RAID Set" and should have the word "Online" in green. Then click the Delete button down below the list view.
Be sure to backup first because this could cause complete loss of data.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How to delete entries from search help for a field

hi guys
how r u all doing.
i have some questions for u.
1. How can i delete some entries(from a list of many) from search help of a field with out (writing)going to a program.
2.in PA10 (Personnel File),when i try to display data for a pernr,i am getting an error saying that infotype 122 doesnot exist.
3.Again in Pa20,when i try to display data for a custom infotype,it leads me to short dump saying that load program does not exist.
any help in this regard,wud be appreciated.
thanks

Follow this
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

How to delete all Action Sets in the Actions Palette

I'm in need of a piece of JavaScript code that will delete all the Action Sets in the Actions Palette. I've scripted the logic to load the appropriate Action Set once needed but I don't want to end up with duplicates at the end of processing the batch.
Any help would be most appreciated.
TIA, Scott

> Could someone clue me in; I'm lost?
getActionSets = function() {
var i = 1;
var sets = [];
while (true) {
var ref = new ActionReference();
ref.putIndex(cTID("ASet"), i);
var desc;
var lvl = $.level;
$.level = 0;
try {
desc = executeActionGet(ref);
} catch (e) {
break; // all done
} finally {
$.level = lvl;
if (desc.hasKey(cTID("Nm "))) {
var set = {};
set.index = i;
set.name = desc.getString(cTID("Nm "));
set.toString = function() { return this.name; };
set.count = desc.getInteger(cTID("NmbC"));
set.actions = [];
for (var j = 1; j <= set.count; j++) {
var ref = new ActionReference();
ref.putIndex(cTID('Actn'), j);
ref.putIndex(cTID('ASet'), set.index);
var adesc = executeActionGet(ref);
var actName = adesc.getString(cTID('Nm '));
set.actions.push(actName);
sets.push(set);
i++;
return sets;

How to delete client (urgent plz help me )

hi friends
i have created a client in my system and i have done client copy in my system (local client copy) why copying i got an error that is there is no enough space in the drive so i want to delete the client and copyed data .can any one help it urgent
thanks in advance
by san

Hi SAN,
1. log into the client to delete
2. go into SCC5 and delete client
3. log into another client and delete entry with SCC4
4. reorg database to recover database space.
Actually, if you check "on" the little "Delete Entry from T000" checkbox, you can skip step 3.
One other way of deleting a client which could give significant performance gain and save time is at OS level using - R3trans
To delete a client( eg: 100 ), you have to create a command file "del100" with following entries
Clientremove
Client = 100
Select *
Place the command file in /usr/sap/trans/bin
$ cd /usr/sap/trans/bin
$ R3trans w <log file name> -u 1 <command file name >
e.g $ R3trans -w del100.log -u 1 del100
To check the progress...
$ tail -f del100
Also, check this link
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c9c4ba111d189750000e8322d00/content.htm
Check this SAP Note for DB reorganization 417539
Hope this will help you.
Hari.
PS: Points are welcome.

How to delete and re-set sales personnel number

Hi gurus,
I have some problems on sales personnel
1. I created a new record using T-code VPE1 and it asked for a TR (transport request). I cancel so the TR is not generated. I will delete the record. Is creating sales personnel a master data or config?
I found although I cancelled, the sales personnel number has increased e.g. from 4 to 5.   So how or where to reset the number back to 4?   I can't find the config or function to reset. Any idea??
2. Can the record 5 be deleted? And if able to reset the number, can 5 be still re-use?
Regards
Bern

Hi Zuzana,
Thanks for your valuable info.
Yes, I totally agreed with you on the unique id. However, as I mentioned earlier in my scenario I have created the record but cancel the transport request (TR) in development environment. Hence, this record will not be transported to QA n production eventually.
Therefore, I need to delete the record. Then reset the number back to 4.   After that, create the record again and henceforth the rest of the sales personnel.
I wonder if it is correct that it will generate the TR i.e. if it's a master data in VPE1 after saving that's it. If it does generate the TR then it is a config.   I am still puzzle if it is a config or something wrong with my development server.
Need your expertise advise.
Thanks.
Regards
Bernard

How to delete line-WILL YOU HELP IMPROVE MOZILLA FIREFOX BY SENDING INFORMATION ABOUT ETC.

The following line appears every time I open up a Firefox website and I want to get rid of it:
"Will you help improve Mozilla Firefox by sending information about performance, hardware, usage and customization to Monzilla"
When I answer YES I WANT TO HELP or NO, the line still keeps appearing when i open up another web page.
Also, how do I stop the message "CHECKING COMPATABILITY OF ADD-ONS" when I open up a web page.
Hoping you can assist-Thanking you
Dick Hunt

First you need to update to Firefox 17.0.1, as the version you are running is out of date.
Then, follow cor-el's instructions above, and if that doesn't resolve the issue, please read [[How to fix preferences that won't save]]

How to delete recovered messages? help!

My MacBook pro has decided to save 64 photos that could not be sent, they are in a folder called recoverable I have tried deleting the folder recoverable I have tried changing preferences and they are still there, please can anyone suggest something that does work for this? Thank you guys.

I have this same problem except it says
"messages could not be moved to mailbox "Trash - On My Mac"
"4279.emlx" couldn't be copied to "Messages"
HELP PLEASE! THESE ARE KILLING MY START UP DISK!

How to delete a random set of indizes from an array as fast as possible?

Hello,
My question sounds a bit like this thread but it isn't... :-(
http://forums.ni.com/ni/board/message?board.id=170&message.id=129888&query.id=10689#M129888
When sampling position/force/resistance data I use a time triggered sampling approach. For later analysis I need (among others) force (Y) over position (x).
To get this I calculate the mean force from all time points with equal positions (as time is my common index). That works quite well but with arrays over 300000 points it becomes a bit too slow...
These are my steps so far:
1. Sort the position array
2. Eliminate duplicates from the position array (no array reshape in loop)
3. With the data from 2. get all indices where my original position array has a given value
4. With the indices from 3. get the corresponding force values from the force raw data and calculate the mean
In step 3 I need to search the whole raw position array as many times as there are different position values in itself.
If I could delete all indizes I already found from the array to search that should (in theory) significantly improve performance. On the other hand such an operation would mean a lot of array reshape operations.
What is the best approach to delete the found indizes?
OR
Is there no benefit in deleting the indizes as the array operations to do this need more time than they save?
Thanks!
Sören

Now I'm getting a bit more confused about the app. If you need a sampling rate higher than the encoder can provide, then then only way I can think of to accumulate multiple readings at the same position is if you have some type of bi-directional cyclical motion. But if you originally used the encoder as a sampling clock, that seems to imply a unidirectional motion. Is the motion cyclical or unidirectional?
Knowing that I need to do some similar processing down the road, I did a bit of tinkering today. The method I described earlier took ~350 msec to process (sort and then calculate averages force per unique position) on 350,000 data points. A little more tinkering gave me a method that took <100 msec. The machine was a pretty new test PC with a 2.8 GHz Pentium. Here's an outline and perhaps I'll be able to scrub the code a bit to post soon. Hopefully someone will have some even better ideas!
The basic idea is essentially a histogram where each possible integer position value maps to a histogram bin.
1. Based on knowledge of your test equipment, you can know the # of unique positions that can possibly be recorded. Pre-initialize 2 arrays of this size before starting the main data acquisition. Both should be full of floating-point 0's. These will hold (a) count of entries and (b) sum of forces. Call them the binning arrays. My test used a size of 8000 possible positions.
2. An auto-indexing For loop goes through the 350,000 integer positions and floating point forces. The binning arrays enter this loop through shift registers.
3. For each pair, use the integer position to map yourself to the appropriate index of the binning arrays. Increment that element of the count array and add this iteration's force value to the sum array.
4. After loop completes, divide sum array by count array. These are your average forces. (This is why the count is computed as a floating point value. It was very costly to allow a type coercion from an integer count array into the division function.) Note that unsampled positions should have 0 counts and produce a NaN result from the division.
There are also ways to calculate a running average in the loop, but I haven't checked (yet) to see if it's faster. The median you mentioned would need some extra post-loop steps.
I'm sure that if this were a coding challenge, someone would cut the processing time at least in half... Anyone out there?
-Kevin P.

How to delete photos?? help!!

having trouble deleting photos that were sync through my computer, and i wanted to have more space on my iphone.
Message was edited by: Mich826

but when trying to unsync a message appear, saying are you sure you want to delete this photos? I'm afraid of losing my my other photos and might not restore them. would that be the same proccess?

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

How to delete a node based on some attribute value

Hi,
I want to delete one node from xml file.
My XML file is given below::::
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<config>
<employeeDetails>
<employee id = "1" name = "aa" salary = "1000" />
<employee id = "2" name = "bb" salary = "2000" />
<employee id = "3" name = "cc" salary = "3000" />
<employee id = "4" name = "dd" salary = "4000" />
</employeeDetails>
</config>
Lets say i want to delete the row whose id = "2" means whole employee node of id 2, but i don't know how to delete?
Please somebody help me its very very urgent.

madforjava wrote:
Please somebody help me its very very urgent.Is someone going to die if you don't get answered within a couple of minutes?

I want to delete VM fusion and windows 7 then install windows 7 with bootcamp, how do I do this? Help Please!!

I am running VM Fusion firm ware and windows, so I can check my military email form time to time and esign documents from time to time. But it is way way too slow, Can anyone tell me how to delete the firm ware and windows and then use bootcamp to run windows? Please help!

1. Are you backing up your entire drive? If yes, it will include you Mac and the VM, both, unless you specifically excluded.
2. In a nutshell, leave your VM intact, if you have about 50-100GB free on the current hard disk.
3. You can install Windows via Bootcamp on the existing disk, provided #2 is true.
4. What type of a Mac do you have, the year/model would help fill in more specific details.
5. The steps to install Windows via Bootcamp are
     a. Run Application -> Utilities -> Bootcamp Assistant.
     b. It has three check boxes, which will download Windows drivers which support Apple hardware, partition you disk, and install windows
          using the install media. Depending on #4, it may require using a USB2 flash drive of 8/16 GB.
     c. Once you have Windows installed, you may need to install drivers that support Apple Hardware.
     e. You can transfer files from your VM to your Bootcamp Windows installation. At this point you can delete the VMwar
          Windows, if you like.
     f. Please be aware that to run Windows under Bootcamp would require selecting Windows and rebooting the Mac overtime you want to switch between OSX
         and Windows.
This is the quickest set of steps that will have Windows running.

How to Delete a Pattern? Plz Help.

Hello:
OS: Windows 8 64bit Photoshop CC
I made a few patterns and went to Edit > Define Pattern and named it.
Then I made a new document window and made a shape and then used the Layer Styles to try out my new pattern as an overlay.
The pattern was there which was great. (Excpet I'm uncertain of how exactly it saved).
I made some more variations of the pattern.
Now, there are a few within the set that I don't like at all and would very much like to delete them. But, everything I have tried to delete them hasn't worked out.
The oddest thing to me is that when I go to Program Files > Presets > Patterns the pattern isn't there and It's not in Program Files (x86) either.
I have tried the Preset Manager. I have tried every possible way in which one can access the patterns but nothing is working out.
When I Delete from the Layer Styles panel and then load a new set and then return to the set I made the individual patterns I want gone, and have Deleted, return every time. The Preset Manager won't seem to let me delete the pats either.
I do not want to lose the entire set just a few individual pats.
Also, I have made some new patterns which I would like to save but now when I try to save them I am told that i do not have permission to save in that location - of which is program files > presets >patters and that i need administration permission and then it asks if i want to save in: Kara which is the name of my computer. ()
(why isn't this more intuitive?)
Yes, I have read the manual ... that is what said to do it the way that's not working.
Can someone please help me? It's all driving me quite NUTS.
Thank you in advance for your time!! Much appreciated!!

hi chris
thank you for your time.
i have read what little i can find about the preset manager. i cannot find any info on how to Delete.
was just returning to say i figured out the save thing from the manual ... which oddly... is hard to find b/c when i click on Photoshop CC manual ... nothing about Patterns is listed.

How to Delete a Hyper Set - Help!

Similar Messages

Maybe you are looking for