How to delete a product

Hi Experts,
How can we delete a product that is downloaded from R3 to CRM?
I tried using the report 'COM_PRODUCT_DELETE_SINGLE'.
But this report is able to delete some products while not able to delete some others that are being displayed in COMMPR01.
What could be the reason? How can I delete others.
Any pointers would be of great help. TIA.
Regards,
Kris.

Hi,
Run the report and then in product id use f4 to enter the product, the product might be created with another product type check it.
u might be directly deleting it with selecting product type, dont select it urself try using f4 to enter the product and the product type will be taken automatically or u can also select the product but do not set the product type manually.
Also uncheck the option "simulation no deletion"
This will resolve ur issue.
Regads,
A S

Similar Messages

How to delete Open Production Orders

Hi,
I would like to Delete Open Production Orders.plz tell me How to delete Open Production Orders

Hi
for deleting POs you have to delete the line items. First select the line items and then choose the icon 'delete' in the item overview screen of PO.
For open PO s also you have to do the same Or else change the PO quantity to the desired qty for what GRN has been made.
Regards
Siva

How to delet my Product Registration

please give me an answer about how to delet my Product Registration?

This USERS helping Other USERS. It isn't staffed by Toshiba Employees. Go to the Communicate Link at the top of this page anc contact Toshiba directly.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

How to delete the production order in mass?

Dear Experts
Please tell me how to delete the old production orders?

Raja,
CO78 is a one stop transaction for production order setting deletion flag, deletion indicator, archiving and finally deleting.
Generally we schedule the following programs in background in the sequence below,
1. PPARCHP1 for Setting Deletion Flag
2. PPARCHP1 for Setting Deletion Indicator (Once set cannot be revoked- so care should be taken in selection of orders)
3. PPARCHA1 for archiving the production order with Deletion Indicator active. Basis should set the database/storage space for archiving/storing the records.
4. PPARCHD1 for Deleting the records from SAP database.
Regards,
Prasobh

How to delete the product?

Hi Gurus
I want to delete product how I can do it?
E.g.: I Created Product id 3 now I want to delete that Product id 3 so what should I do
I used Re Categorized products: COMM_PROD_RECATEG but it showing
So what should I do?
Regards
Mahi
[email protected]

Hi Mahesh,
Transaction code for archiving the product master data is SARA. After archiving product, can be deleted.
Refer the following link here you can find more information on this.
http://help.sap.com/saphelp_crm50/helpdata/en/d0/493a40a63bc65de10000000a155106/frameset.htm
The following constraints apply when archiving products in the CRM System:
· Archived products cannot be reloaded into the CRM System
· Products can only be deleted if they have been archived
· Archived products can only be displayed in a technical view in the Archive Information System
· Inactive products cannot be archived
· Configurable products cannot be archived
· Contents of documents are not archived, only the URL is archived
· Documents and condition records cannot be archived or deleted
Hope this information helps you.
With Best Regards
Nadh.R

Deletion of production orders

Hi All,
How to delete the production orders in a day from the system

We use CO78 in a monthly program to set the Status to DLFL.
The next step is to set the Deletion indcator and then Archive, which will remove the order from the system.
What exactly do you want to accomplish when you "delete the production orders in a day from the system?"
Regards

How to delete the queries in BW Production which are no longer existing.

Hi,
How to delete the queries in BW production which are no longer existing in DEV.
1. I tried Using RSZDELETE in Production it is not getting deleted and the below message given.
Query object 4A7V83T3RB4ABIOKSDJT2HWDL is blocked. Deletion has been cancelled.
2. I tried creating another query in dev with the same technical name and send a transport with deletion
it is not working.
Please advise me on this for any function module or any other method.
Thanks
Surya

Hi,
If you transported the query from DEV and now you want to delete it, you should open a BEx request (Dev Class under which it was originally transported -- or-- Standard - type) in DEV delete the query and move the transport to Production.
As far as your error is concerned, usually when you can delete a query using the delete option in query designer itself,
Business Explorer> query-> delete objects , when you press execute the system offers you a list of dependent objects on the query(workbook,views), in case the sysytem is unable to delete them i.e.they being used as a input query for a characteristic variable (replacement path),then system throws this error.You can delete these all depndents under there prescribed roles , fav s & then proceed.
Hope this will be expedite.
Thax & regards.
Vaibhave Sharma

How to find out who has deleted the production Query

Hi All,
I have searche SD , i can find it for infoobject deletion but i couldn't find it for Query.
Please let me know is there any possiblity to kow
How to find out who has deleted the production Query
Awaiting for your replies.
cheers

Hi Mahesh and all,
Thanks for all your inputs.
I have tried with RSRREPDIR tabel , I am unable to see that query at all.
If I use theT-code SLG1,
please guide me on the steps with paramets to be given in the respective ..object, subobject etc..
OR
could you please suggest any other way.
cheers
leena

How to delete users from Dev and Testing once it is deleted in Production

Sap Gurus,
Is there any automated way to delete the users from development and testing once it is has been deleted from production. i.e. when the administrator deletes the user from production after logging in then it should automatically delete the users from testing and development without logging on in these 2 systems (development and testing). Can anyone help me in resolving this issue.
I am very much thankful in advance..
Regards,
Kali

Rob,
Ok, you are right in that way I can allow only that person but I have to allow 2 persons at this time. i.e. If at all I have to allow one more person also how should I do it, and also what if the person uses different passwords in development and testing?
Thanks for your response Rob.
Kali.

How to delete an existing product

how to delete an existing product, pls provide some inputs.
thanks
RH

http://help.sap.com/saphelp_erp2005vp/helpdata/en/b3/24802685564046a4b9df912f9904ef/frameset.htm
found this in SAP Help
br,
sri

How to delete Product Category ?

Hi,
How can I delete a Product Category ? Some products are assigned already to this category, and I cant delete that assigment and in consequence, I cant delete that product categories. =(
how can I delete this ?
Regards,
Diego

Thanks Jay, I'll try it =)
This situation was due to an SRM client copy (exact), so all my categories were linked to my old rfc system.
Due to this panic situation (deletion not possible), I asked basis people to delete this new client and make a new copy (only customizing).
Definitively, next time I'll wait a little bit more for a good advice in sdn...ej.ej
Thanks and regards from Mexico,
Diego

How to delete Products in SRM

Hi all,
How to delete products in SRM, I think products can be archived in transaction COMMPR01under General tab.
Is there any option or program to delete products directly.
Regards,
Ravi

Hi
Deleting Material Master from SRM If you want to delete hierarchy of product, run Report -> 
COM_HIERARCHY_DELETE_SINGLE - Deletes All Hierarchy and Category Data
COM_HIERARCHY_DELETE_ALL - Deletes All Hierarchy and Category Data
If You want to delete all or selected product, run Report ->
COM_PRODUCT_DELETE_SINGLE - Deletion of a product from the database
COM_PRODUCT_DELETE_ALL - Deletion of All Product Master Data
Please go through this link below for more details ->
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
Do let me know.
Regards
- Atul

How delete one product of a opportunity with WebService?

Hi
I know to insert a new product in a opportunity with webservice (with ListOfProducts of opportunity.wsdl) but, how i can delete one product of a opportunity?
Thanks,
Ivan

This is my code:
crm.oportunidad.Opportunity oportunidad = new crm.oportunidad.Opportunity();
OpportunityWS_OpportunityDeleteChild_Input qbe = new OpportunityWS_OpportunityDeleteChild_Input();
OpportunityWS_OpportunityDeleteChild_Output qRet;
qbe.ListOfOpportunity = new Opportunity1[1];
qbe.ListOfOpportunity[0] = new Opportunity1();
qbe.ListOfOpportunity[0].ListOfProduct = new crm.oportunidad.Product[1];
qbe.ListOfOpportunity[0].ListOfProduct[0] = new crm.oportunidad.Product();
qbe.ListOfOpportunity[0].ListOfProduct[0].ProductId = psProductoID;
oportunidad.Url = string.Format(surl, getInstancia(),sSessionID);
oportunidad.CookieContainer = GetCookieContainer();
qRet = oportunidad.OpportunityDeleteChild(qbe);
And this is the error:
No se puede utilizar una clave de usuario para la instancia de componente de integración 'Opportunity_Product'.(SBL-EAI-04397)
When i try to add products i have the same error code
Any idea?

How to delete Product Specific Transportation Lanes?

I'm trying to delete a product specific transportation lane (like you would do in /SAPAPO/SCC_TL1)
but can't find an appropriate BAPI to help me do this. I see BAPI_TRLSRVAPS_DELMULTI but that seems to delete the entire Transportation Lane instead of a specific product's lane.
I've tried using BDC with /SAPAPO/SCC_TL1 but don't think it'll work since it's an ALV and I'll be running in background.
Anyone encountered this before?
thanks!
Paul

Hi
Do following steps:
Go to SE38
FUNCTION_LOADER_INLAY execute (F8)
Step 1
u2022     Go to the Design tab page. IN the Name of Put Function Module field, we enter the function module name BAPI_PIRSRVAPS_SAVEMULTI.
u2022     Press Enter and the Available Parameters table on the left side of the screen is filled automatically.
u2022     Select the lines Logical System, Commit_Conrol, Planning Version, Requirements and Return.
u2022     Choose Column Right to transfer the parameters to the Selected Parameters table on the right side of the screen.
u2022     Choose Format Worksheet.
u2022     Confirm the dialog box that informs you about manual formatting the cells. The system directly opens the Data tab page.
u2022     Now select the entire worksheet, right-click in the selected area and choose Format Cells.
u2022     In the Number tab page we select the category Text and choose OK.
Step 2
In the first available empty line the make the following entries (for every cell you can find additional information about data you have to enter by selecting Input Help):
u2022     Logical System: APO Logical sys name
u2022     Commit_Control: E
u2022     Planning version: 000 (whether data is being transferred to the active planning version or to a simulation version)
u2022     Product:
u2022     Location:
u2022     Location Type:
u2022     Atpcat: FA
u2022     Date from: e.g. 01.05.2006 (Valid from)
u2022     Date to: e.g. 01.21.2006 (Valid to)
u2022     Quantity: 419
u2022     UOM: KG (unit of measure)
u2022     UOM_ISO: KG
We choose Save.
Confirm the information prompt.
(It is very important that we select row with data we need to load)
Then We now choose button u201CSAP SYSTEMu201D
After sometime you see the message u201CData Transfer ended successfully appearsu201D
Now go to Product view /n/SAPAPO/RRP3 and check Fcst loaded.
Cheers!
SCMBEE

How can i closed production verion wise in c223

Welcome, ANILKUMAR BEHERA
Your Control Panel
Your Reward Points
Your Questions
Expert Forums » ABAP Development » ABAP Objects
Thread: how can i get production version value(verid) for luck through bdc.
Your question is not answered.
Mark as answered.
You are watching this thread. To stop watching this thread, click "Stop Watching Thread" below. (Watch Options)
This watch sends emails by default. If you don't want to receive emails on changes in this thread, go to the watch options, un-mark the "Email" checkbox next to the thread's entry and click "Update".
Reply to this Thread   Search Forum    Stop Watching Thread    Back to Thread List
Replies: 0 - Pages: 1 Threads: Previous
ANILKUMAR BEHERA
Posts: 20
Registered: 10/13/07
Forum Points: 0
   how can i get production version value(verid) for luck through bdc.
Posted: Feb 14, 2008 1:32 PM     Edit      E-mail this message      Reply
HI..
i have one requirement..that in c223 tcode while i luck the production version through BDC in my report program as i given bellow...i upload mat.no , plant, production version and 1(for luck)...
req:: i want while i given production version for particlular plant and material no...that production version should be luck....
so in standard tcode c223 how can i get value to compair it with my input production version value then i will close that...
program:::
report ZC2232
no standard page heading line-size 255.
*include bdcrecx1.
Tables : mkal.
data : nodata value '/' .
data : CTUMODE type c value 'E'.
DATA : CUPDATE TYPE C VALUE 'L'.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
data: begin of HEADER OCCURS 0,
data element: MATNR
MATNR_001(018),
data element: WERKS_D
WERKS_002(004),
data element: PLNNR
PLNNR_003(008),
data element: CP_STTAG
STTAG_003(010),
data element: ENTRY_ACT
ENTRY_ACT_005(011),
data element: PLNAL
PLNAL_004(001),
data element: FLG_SEL
FLG_SEL_01_006(001),
data element: PLANTEXT
STLAL_004(002),
DATUV_005(010),
WERKS_008(004),
data element: PLN_VERWE
ktext_005(001),
data element: PLNST
DELKZ_005(001),
data element: LOSGRVON
LOSVN_011(017),
data element: LOSGRBIS
LOSBS_012(017),
data element: PLNME
PLNME_013(003),
data element: PLNME
stlal_014(002),
end of HEADER.
data : begin of it_header occurs 0,
matnr like marc-matnr,
werks like marc-matnr,
verid like mkal-verid,
mksp like mkal-mksp,
end of it_header.
data : exnum(40) type c,
exnum1(40) type c,
cnt type I,
CN(2) TYPE C,
c1 type c value '(',
c2 type c value ')'.
start-of-selection.
parameters: p_file like rlgrap-filename.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
importing
file_name = p_file.
start-of-selection.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = it_header
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
DELETE it_header WHERE MATNR IS INITIAL.
LOOP AT it_header.
*start-of-selection.
*perform open_group.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=ENTE'.
perform bdc_field using 'BDC_CURSOR'
'MKAL-WERKS'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=PICK'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
*>>>>>>>>>>>>>>>>>>>>here what logic can i write****
clear cnt.
do 15 times.
cnt = cnt + 1 .
CN = CNT.
exnum = 'MKAL_EXPAND-VERID'.
concatenate exnum c1 cn c2 into exnum1.
*perform bdc_field using 'BDC_CURSOR'
exnum1.
GET PARAMETER ID 'VER' FIELD EXNUM1.
CALL TRANSACTION 'C223' AND SKIP FIRST SCREEN.
if ( it_header-verid = EXNUM1 ).
exit.
endif.
enddo.
****************************************************end***>>>>>>>>
perform bdc_field using 'BDC_CURSOR'
exnum1.
perform bdc_dynpro using 'SAPLCMFV' '2000'.
perform bdc_field using 'BDC_CURSOR'
'MKAL_EXPAND-PLNTY'.
perform bdc_field using 'BDC_OKCODE'
'=PRFG'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=RW'.
perform bdc_dynpro using 'SAPLCMFV' '2000'.
perform bdc_field using 'BDC_OKCODE'
'/ECANC'.
perform bdc_field using 'BDC_CURSOR'
'MKAL_EXPAND-VERID'.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'BDC_CURSOR'
'MKAL-WERKS'.
perform bdc_field using 'MKAL-WERKS'
it_header-werks.
perform bdc_field using 'MKAL-MATNR'
it_header-matnr.
perform bdc_dynpro using 'SAPLCMFV' '1000'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_transaction using 'C223'.
endloop.
*perform close_group.
*& Form bdc_dynpro
text
-->P_0161 text
-->P_0162 text
form bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
endform. " bdc_dynpro
*& Form bdc_transaction
text
-->P_0351 text
form bdc_transaction USING TCODE.
call transaction 'C223' using bdcdata
mode CTUMODE
update CUPDATE
messages into messtab.
if sy-subrc 0.
message e000(zmm01) with
'Check your input data'.
endif.
endform. " bdc_transaction
*& Form bdc_field
text
-->P_0346 text
-->P_0347 text
form bdc_field USING FNAM FVAL.
if fval nodata.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
endif.
endform. " bdc_field
Pages: 1    Back to Thread List
Threads: Previous
New content since your last visit
Updated content since your last visit

macbook pro, 500gb ,version 10.9.5 ,
all files in open in Quiketime media player how can i closed..whenever i open quicktime all files are open..i have tried to closed by force quit..but whenever i again open quicktime files are still open..
You have basically formed a "poor" habit—i.e., closing apps and assuming they will close any/all open activity windows. The latest versions of Mac OS X now, by default, "remembers" what windows are open when an app is closed. You have three options here:
1) Get in the habit of closing active windows before closing an app to prevent them from re-opening automatically the next time the app is opened.
2) Hold down the "Option" key when selecting the "Quit" menu option (keyboard shortcut "Option-Command-Q") with system preference option in the default mode.
3) Change the default system preference to automatically close active windows in the same manner that older Mac OS X versions did by checking the "Close windows when quitting an app" in the Syeyem Preferences "General" menu.
NOTE: This setting works as a "software switch" for your application's "Quit" menu option. I.e., in the "Unchecked" mode the Option-Quit menu option and keyboard shortcut (Option-Command-Q) tells the system to forget active windows when the app is next opened while the "Checked" option mode tells the system to remember the active windows when using the Option-Quit menu or keyboard shortcut options.
Your choice for settings and/or method of closing apps.

How to delete a product

Similar Messages

Maybe you are looking for