How to delete a transport request easily?

Hi Gurus,
I need to delete a transport request. Unfortunately, I received an error that says
"Request/task BWDK903562 cannot be deleted because it contains locked objects".
So, in order to delete that transport request, I have to first delete all objects contained in that request. However, there are just too many of them if I were to do it manually one-by-one.
Is there any approach where I could delete this transport request easily without first deleting all objects contained in that request?
Thanks you in advance.

Hi Fulham,
A transport request cannot be deleted with locked objects. So you have to first unlock the objects in the request. To do this: SE03 --> Request Task --> Unlock Objects.
The in SE10 select the request you want to delete and expand. Then right click on the sub node of the request and delete. Then Select the main request and delete.
Hope this helps.
Bhargava

Similar Messages

  • How to delete the Transport Request?

    Hi all,
       I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
    Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
    Regards,
    Nagesh Ganisetti.

    I am not sure I understand.
    You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
    Transports will be configured in all the systems in your landscape (including production).
    Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
    Added -
    I now see that the request is in production.
    Igore the above in that case.
    If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
    When you try to delete, what message do you get?
    Message was edited by: Ajay Das

  • How to delete unreleased transport request where the objects are locked

    Hi Experts,
      I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

    Hi,
    First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
    Than go to se10 and delete what you want.
    I hope it helps.
    Bulent

  • How to delete released transport request

    Gurus,
    We are doing a system synchronization and for that we are going to make a  system copy from BWP TO BWD. Hence I am told to delete all modifiable transport requests, which I did without any problem.
    But in BWQ there are some transports which are already released  and how I can delete them. They don't show under modifiable transports , rather they show under released transports.
    (For your information in my company any transport released from BWQ does not automatically go to production, we have to send a manual e mail request with the transport # to basis. Therefore  these transports even though they show released they will never make it to production as I have never sent release request to basis and these transport are of no use any ways.
    So please guide me how to delete these released transports in BWQ.
    Thanks
    MK

    Hi MK,
        Goto Import queue of target system(T Code: STMS) and delete(Shift+F2) from import queue. or from menu --> Request --> Delete.
    In this way it only deletes from import queue.
    Hope it Helps
    Srini

  • How to delete a transport request once it is been realised.

    Hi Gurus,
            I need to delete the object from the existing transport request which is already been released and create a new transport request to transport. Is this options possible.
    With Regards,
    Shakthi.

    - You cannot delete a released transport request, but you (or Basis team) can remove it from the import queue in the following systems (starting with quality) (STMS)
    - Then you could also via transport tools add the objects of the released request in a new request, there remove the (no longer wanted) object of the new request and release/transport this new request.. (SE03 - Look for "Merge Object Lists")
    Ref : [Working with the Transport Organizer|http://help.sap.com/saphelp_nw04/helpdata/EN/57/38e14e4eb711d182bf0000e829fbfe/frameset.htm]
    Regards,
    Raymond

  • How to delete the Transport Request release from SE09

    Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on  ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
    hope u will help me asap
    thanks
    hardeep

    Hi Hardeep,
    Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
    when u delete a request all the objects saved or locked onto that request are released or unlocked.
    So all the objects that were previously locked or saved onto a req are now ready to save into another req.
    Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
    another option is release the req but do not transport it to target system.
    Regards
    Ellora

  • How delete the Transport request in Development system

    Hi Guys,
    I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
    I need to delete the Transport request, could you please suggest how to delete the Transport request.
    Please provide the steps to delete the Transport request.
    Thanks,
    Gourisankar.

    hi Gaurishanker
    check this thread
    How to delete transport request if child request was released
    hope it helps you.
    thanks
    Sachin

  • How can i delete a transport request?

    Hello:
    I only speak a little english. I wait that you can understand me.
    I have a transport request that is released. I make bad this request and i need delete it. But, when i go to se10 and I try to delete I recive this messagge:
    Request/task ____ already releaded (not modificable).
    How can I delete this request?
    Thank you very much.
    Report RDDIT076 is internal and should not be executed by customers.
    - Reported by Jason ORiordan
    Message was edited by: Suhas Saha

    Hi,
    It is easilly possible to delete the cofile and the datafile of the released transport request but why would you need to do that ?
    It is also possible to delete a transport request in the transport tables but it is a very bad idea and could even be seen as a temptative to hide a forbidden action in the system.
    It will be seen by a security audit as this would create a hole in the request order numbering.
    You would need to use direct database access to delete a released transport request.
    As I told you before, I would NOT do it as it is hasardous et may generate security audit problems.
    You can also destroy your transport system.
    Transport requests are stored in table E070.
    We only modify the e070 table after system copy by database refresh to reset the next transport request number. It is done by inserting a line in the table. We never delete inside this table.
    Use at your own risk !
    Regards,
    Raj.

  • To delete the transport request.

    when i'm trying to delete the transport request by using se09, it responses with " Request/task BWDK916118 cannot be deleted because it contains locked objects." That request is created by me. It showing same name but it will not allow me to delete. Please help to delete how to delete that request.
    Thanks
    Satish

    Hi..
    Basically you are getting this messge because first you have to delete all the objects of the underlying sub requests and then the subrequests ......then finally the actual request.................
    Secondly, it is better to unlock all the objects first so that you can delete all the objects at a time..............because if  you have to delete all the objects one by one.....and if each requests contains 100s objects then it is very tedious to delete all the objects one by one...
    Go to SE03 --> There you will get the options "Unlock Objects (Expert Tool) " --> Click over there --> give the subrequest nos and unlock it....
    Then go to SE01 --> Click on "Objects" tab --> You will get the change button --> click on it --> Select All and Delete at a time...
    Regards,
    Debjani..

  • How to release a Transport Request at operating system level

    HI,
    How to release a Transport Request at operating system level. Please specify the complete commands along with the pf parameters for TP Export only.......

    <b>tp export <request></b>
    This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions
    <b>tp cleanbuffer <sapsid></b>
    This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
    <b>tp delfrombuffer <request> <sapsid></b>
    If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
    Reward points if you find this helpful to you.

  • How to delete 100+ released requests from the import queue?

    Hello
    How to delete 100+ released requests from the import queue?
    One by one or there is more convinient way?
    Thanks

    To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
    1) Highlight the status field of the import queue.
    2) Sort the import queue by the status.
    3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
    4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
    5) Go to menu option Request > Delete.
    If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

  • How to delete a single request from DSO in BI 7.0

    Dear Experts,
    Could you please tell me how to delete a single request from DSO?
    I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
    Please suggest me this issue.
    Regards,
    Prathap

    IN DSO--its a very basic thing....
    ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
    So ,each new request has a realationsip with the older request.
    So in the cases:
    1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
    e.g older request  entries:
    a x 1
    new request
    a x 2
    change log
    a x 1
    a x -1
    a x 2
    so its quite obvious you can't have  a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
    2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
    I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
    thats request reverst posting
    IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
    regards,
    rk

  • How to delete the duplicate requests in a cube after compression.

    Hi experts,
        1. How to delete the duplicate requests in a cube after compression.?
        2. How to show a charaterstics and a keyfigure side by side in a bex query output?
    Regards,
    Nishuv.

    Hi,
    You cannot delete the request as its compressed as all the data would have been moved to E table ..
    If you have the double records you may use the selective deletion .
    Check this thread ..
    How to delete duplicate data from compressed requests?
    Regards,
    shikha

  • How to delete the compressed request in bi 7.0?

    how to delete the compressed request in bi 7.0?
    Reverse Posting option available in BI 7.0?
    Thanks,
    Pramod

    Hi Pramod,
    Check this Thread,
    Re: Selective deletion after compression
    before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
    Hope this helps..........

  • How to delete multiple yellow request in PSA

    I am in BI7 and I have to delete the all the request present in PSA But in my PSA there are around more than 500 request which are in yellow status.Please suggest how to delete all the request in one go ,Since it very cumbersome to change status of every request to red and then delte it

    Hi,
    Debjani thanks for your reply,
    It helped me
    I have first deleted the contents from PSA table and
    then I have searched for request in RSTSODSREQUEST but this table does not contain that requests
    then i have got another  table RSREQDONE  whcih contains that request so I have deleted  request from that table.
    Final solution is
    Go to SE14 >> Give the PSA Table name >> delete it
    Then delete the requests from the table RSTSODSREQUEST/RSREQDONE

Maybe you are looking for

  • Webi 4.0 Passing parameters - how the heck ! does it work or not ?

    dear all i am knew to all this, quite capable of reading manuals, and an ex ABAPer in SAP. but when it comes to trying to pass a single parameter to a Webi report, based upon the new open document v4.0 syntax, it has finally got me. it seems i am not

  • How to access applications in another computer

    how to make use of java programs to access applications or files in another computer across the same network or over the internet. can help???

  • Remove leading space(blank) REGUH-RWBTR in script

    hi, i am now dealing with cheque priting in word issue. the output format should be : <b>USD 111,000 AND CENT 45 ONLY.</b> the amount field i use is REGUH-RWBTR in script. but the output come with leading of space. <b>which is as : USD         111,00

  • I tried to get my adobe acrobat back to full membership.

    I tried to phone to the adobe helpdesk in the neteherlands. I have waited on the phone to times 45 minutes...And knowone from the helping desk is answering me. So I had to hang up the phone...So the helping desk is not functioning at all. So I really

  • SAP ISU Auto Reconnection on payment receipt

    Hi Friends, We need to Automate the process of Auto reconnection on payment received. i.e When payment received from customer through FPCJ tcode system will look for the disconnection status and do as follows             If disconnection Status is 20