How to delete a Vendor from SRM?

Hi
Can anyone guide me how to delete a Vendor from SAP SRM? I mean including at the Table level
Regards
Srujan

Hi
First you need to block in ECC and run BBPUPDVD for that
or
Please check this table BBPV_BUPA_VENMAP.
This table will consists of all vendor releated info.
Regards
Satish

Similar Messages

How to delete the values from TKOMV at runtime after creating PO

Hi,
How to delete the values from TKOMV at runtime after creating PO from IDOC. I am creating PO through IDOC, subsequently need to create Sales order and again need to create 2nd PO with reference of Purchase Requestion(created with sales order). At the time creation of 2nd PO the Header conditions are appearing twice and net price value is appearing wrong.
Thanks in advance.

Hi Padma
Can you do this activity once the company code is in to production. I guess you can not do this activity, if the company code is already in to live. Setting or resetting of the recon accounts will hinder the previous actitivity. Infact resetting of the company code is also not a good option.
Any how, thanks for the inputs. Please let me know whether i can do this activity only at the subledger level which will not impact other modules. The one solution i can figured out is , reverse all the transactions for the corresponding asset in the year of takeover and pass the entries again in the same year correctly which will have effect in Subledger and also in general ledger. But the business people will not allow this, since for a big client it will require lot of authorizations and approvals. Infact the vendor also, is cleared. So we have to reverse the cleared documents as well which is again a task and require approvals as well.
Thanks and regards
Seshu.

Will MM-SUS scenario work perfectly if we replicate SUS vendors from SRM

Dear Gurus'
We are going to use MM-SUS scenario in our classic implementation of SAP SRM. However, we are not replicating the SUS vendors directly from MM system using BD14.
Instead, we are replicating the SUS vendors from SRM system by ticking the 'Portal Vendor' check box in SAP SRM.
Will all MM-SUS scenario work perfectly in such cases? If I refer the configuration of MM-SUS scenario, it mentions about special configuration for transferring the confirmation key from ECC vendor master data to SUS system. How it will be taken care in SRM-SUS vendor replication?
Could you please share your experience?
Thanks and regards,
Ranjan
Ranjan Sutradhar

hi,
Are the Suppliers getting Time Out Errors?
are they able to create the documents ?
I have seen these sort of problems in many customers , there is one performance note created by SAP to resolve this issue.
I do not have the note number now.
But you can search the same with keyword performance along with the component areas
SRM-SUS
ans SRM-EBP-TEC-PFM.
Best would be to enquire with SAP also..

Can we delete the material from SRM ?

Hello,
In ECC, With MM06 & with MM17 we have marked the materials for deletion but can not completely delete it. still client users shop for those materials and
We have the requirement to permanently delete the materials from respective SLOCs so that those deleted materials will not be available at all to requester for shopping.
Archiving is out of scope. Can we delete the materials from SRM also in commpr01 ? or Suggest any other pointers
Thanks & Regards / Pankaj K

Hi Pankaj
Issue during S.cart creation for mtl which are flagged for del at sto locn
as really said, if you delete a material at SL level , srm not validating but SRM validates at Plant level deletion.
Are you in classic oe ECS, However it would have thrown error while creating PO.
How did you delete the material inSRM ?
After you delete a material in SR, what is the status of material ? Is it blocked, Archieved.
BR
Muthu

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

Anyone knows how to delete a file from a directory?????

hi there
anyone has any idea on how to delete a file from a directory? delete(String filename)? thank you.

Hi,
Check this link.
Gives you an example code to show how to delete a file.
http://examples.oreilly.com/jenut/Delete.java
Hope this helps.
Roopasri Vittal
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

How to delete file manually from application data base

Hi All,
Could anyone tell me how to delete file manually from application database.
Thanks In advance
Regards
SAN
Edited by: Sanjay Nair on Sep 2, 2008 10:51 AM

Closed

I found how to delete a series from my ipad, but it still won't download the last episode of the new series I am trying to have. What have I done wrong?

I found how to delete a series from my ipad, but it still won't download the last episode of the new series I am trying to have. What have I done wrong?

What is the GarageBand version that your friend is using?
If it is GarageBand '11, version 6.0.5, you can buy GarageBand '11 as a boxed retail version with the iLIfe '11 bundle, e.g. from Amazon.
Then you can upgrade GarageBand '11 to 6.0.5, using this upgrader from the Support page:
GarageBand 6.0.5
GarageBand 6.0.5 will work well with your system. But if your friend is using the newest GarageBand 10, this will not help. Then ask your friend to send you audio files for each track, so you can recreate the project from the audio. Or your friend could also use GarageBand '11 for the projects you want to share, that will run well in all newer MacOS X versions, even with GarageBand 10.0 installed on the same system.
-- Leonie

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

How to delete the messages from JMS Queue

Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
Regards,
Anuj

How to delete the data from partition table

Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree

874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right.

How to delete a column from the table control in module pool?

Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar N

hi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control

How to delete the apps from your iPhone's purchased list in ios 7

How to delete the apps from your iPhone's purchased list in ios 7

You would need to set up the Hotmail account as a IMAP instead of a POP3 account.

How to Delete the node from cluster when the machine crashed?

In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
There is now way to repair the machine and have to add a new one.
What is step to follow up?

hi
IF YOU WANT TO DELETE RAC1 NODE
check $./olsnodes
1) delete the instance using dbca from any active nodes
crs_stat -t
srvctl stop asm -n rac1
2) delete listener
3) delete oracle_home from oracle user
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
4)delete asm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
5) update cluster node
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
6) update ASm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
cd $ORA_CRS_HOME
cd crs/opmn/conf
check for
$cat ons.config
remoteport=6200
cd crs_home/bin
$./racgons remove_config rac1:6200
$ go to crs home
and $ORA_CRS_HOME/crs/install/rootdelete.sh
$ORA_CRS_HOME/crs/install/rootdeletenode.sh
check for ./olsnodes

How to delete a Vendor from SRM?

Similar Messages

Maybe you are looking for