How to delete an alert

Hi experts.
First.. Sorry for my english...
My question might could be a stupid question...
but..
How can i delete an ALERT??
Under ADMINISTRATION >> ALERTS i can search an alert, i can enable or disalbe an alert, but i can not delete an alert??
Edited by: Gianluca Calloni on Nov 5, 2009 10:44 AM

I Kavin..
Thank you for the reply.
i know that i can rename and /or modify an alert.
Unfortunately, when i try to modify an alert, i receive the error:
'Too many fields (QE 3018),
I find the note N°[ 1304754 |https://websmp130.sap-ag.de/sap(bD1pdCZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=I&note_numm=1304754]
and the note N° 1392477
and i understand that there is still no solution for this error...
It's right?

Similar Messages

How to delete all ALERTS in iCal at once?

Over the years I have added repeating Events with Alerts to iCal on various devices (some of them passed on to my relatives). As a result I get plenty of Alert emails or sounds. I find it onerous to go through all repeating events to delete the alert. Hence my question: how to delete all Alerts at once?
Thanks for any suggestions/pointers/ideas. Cheers, Veit

Hi John,
Thanks so much for your help with this problem. I am trying to remove alerts for a couple of specific shared calendars (which I can edit) but am having some difficulty due to my inexperience with applescript! I am also not sure where else to go for help solving this problem.
My plan is to run your script a couple of times specifying one calendar at a time by name.
This is the modification I made to your script:
tell application "Calendar"
activate
          delay 0.5
          display alert "Removing all alarms from your editable calendars" message "This process may take some time and is permanent. Are you sure you want to do this?" buttons {"Yes", "No"} cancel button 2
          set calname to "Consultant_on_call"
--- repeat with myCalendar in (calendars whose writable is true)
          repeat with myCalendar in (calendars whose name is calname)
                    repeat with myEvent in events of myCalendar
delete display alarms of myEvent
delete mail alarms of myEvent
delete sound alarms of myEvent
delete open file alarms of myEvent
                    end repeat
          end repeat
          display alert "Removing all alarms from your editable calendars" message "This process is complete." buttons {"OK"} default button 1
end tell
Are you able to tell me what I am doing wrong? Thanks again.
Andrew

How to clear the alerts in Grid

Hi,
Grid version : 10.2.0.5
1)I would like to clear the alerts older than two days in grid.
We are monitoring more than 500DB's in grid.Is there any procedure to remove the alerts ?
2)How to clear or reduce the "All Targets Policy Violations" in grid.
3)How to clear or reduce the "Security Policy Violations" in grid.
Please need your help on this.
Thanks.

Open your Grid Control Console
Go to Alerts --> Warning
Select database and press go
You will see that the Clean button appear and checkbox for each warning alert that its possible manual clean you will see the checkbox to activate
The Critical Alerts can't clean manualy.
OR
1. Make a SELECT * from MGMT_CURRENT_SEVERITY and show for the TARGET_GUID, METRIC_GUID and KEY_VALUE.
2. Connect to db user SYSMAN and execute:
exec EM_SEVERITY.delete_current_severity(TARGET_GUID,METRIC_GUID,KEY_VALUE);
for example:
exec EM_SEVERITY.delete_current_severity('0DEB8E6980695B7548CF98871084AD10','F95BA0D95585002889E1ABF92B2DA7C3','SYS');
3. Wait a few minutes.
The content of the MGMT_CURRENT_SERVERITY table is displayed as ALERTS or ADDITIONAL ALERTS in EMs main menu. If you delete the ALERTS only in the MGMT_CURRENT_SEVERITY table, the alert messages appears still in some EM submenus.

Deleting the Alert Message

How can I delete the Alert Message which says that a photo with a certain number cannot be found? I may have deleted that numbered photo in the camera or I may have deleted another from iPhoto or from an imported group. When I click on "cancel", it continues on with another error message for another photo that it can't find and proceeds todo that until it has issued alert messages for each one. The only way I can get rid of the message and continue to work is the "Force Quit". I would like to eleminate the error message entirely.

Check iPhoto's Advanced preference section to see if the checkbox to copy files into iPhoto upon import is checked. If it is not then your library is an alias based library and the original source files are missing. Also look inside the iPhoto Library/Originals folder do see if the full sized image files are present in the subfolders. If they are all alias files (with a small arrow in the lower left hand corner) then you may have lost all of your photos.
Post back with what you find.
Do you Twango?

How to delete empty pages in in-design document?

Hi All,
       How to delete empty page which may contains text frame with no contents, or may be no text frame...
Plz provide me the script...
Thanks in advance,
Vel....

Indesign CS5.
My script is,
doc=app.activeDocument;
pageObj=doc.pages.item(0);
txtObj=pageObj.textFrames.item(0);
var temp=doc.pages.length;
for(var i=0;i<temp;i++)
    if(doc.pages[i].textFrames.item(0)!=null)
            if(doc.pages[i].textFrames[0].contents!=null) // here, i used "contents" instead of "lines". but also not working well...
                alert(doc.pages[i].textFrames[0].contents);
                alert("True");
            else
                doc.pages[i].remove();
                i=i-1;
                temp--;
    else
      alert("False");
      doc.pages[i].remove();
      i=i-1;
      temp--;
I've a sample document which contains a empty page without a text frame and another empty page with text frame with no contents on it... but my script remove only the empty page and not the empty page with txt frame...
pLZ HELP JONGWARE...

How to setup FAX Alert CCMS MTE

Hi,
I would like to know how to setup fax alert, for example if fax does not work, so what is MTE will I use for fax alert
all others alerts are working fine and i received e mail , how do I receive e mail if fax does not working... ?
Thanks

Hi
The alert inbox is user-specific and displays all the alerts for each alert server that have been generated based on the alert configuration.
An alert can be delivered to you by e-mail, fax, or SMS. In each case, you will also find the alert in your alert inbox, irrespective of the delivery method
In the Personalization tab in the alert inbox, you can either specify how u want the alert to be sent via fax, sms or mail. In your case it will be fax.
MTE
By resetting a monitoring tree element, you delete open alerts and data collected for the MTE. You can also reset multiple selected MTEs, or also all MTEs in a particular hierarchy in the monitoring tree. Resetting an MTE deletes alerts and performance data.
To be able to reset MTEs and alerts, you must first activate the maintenance functions.
Choose CCMS ® Control/Monitoring ® Alert Monitor in the SAP Easy Access menu, or call transaction RZ20.
Expand the monitor set that contains the monitors that you require and choose Start Monitor.
Choose Extras ® Activate Maintenance Function.
Select the MTEs that you want to reset and choose Edit ® Node (MTE) ® Reset.
After you have confirmed the Alert Monitor warning, the MTEs are reset to their status at the time of the system start or their insertion into the Alert Monitor. The Alert Monitor continues to collect data and trigger alerts for the MTEs.
please go through this link
http://help.sap.com/saphelp_nw04/helpdata/en/26/1afe3b470a1649e10000000a11402f/frameset.htm
To receive Email Alerts
Refer
Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
Configuring scenario specific E-mail alerts in XI-CCMS: Part u2013 1
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Hope this will clear your doubts
Thanks
Saiyog
Edited by: Saiyog Gonsalves on Jun 3, 2008 4:53 PM

How to save the Alerts obtained from the Alert profile

Hi all
I have an issue- I want to save alerts obtained daily for the specific alert profile.
Are the alerts saved in the table.
I want to have the alerts created on the date wise with all the specific informations such as for which material, orders and quantity etc..
I am basically using the order alerts - for finding out the excessive orders from the alerts. I want to have a details of the alerts created on each date wise.

Hi Jagadish,
If you have used 'Database Alert' type then the alerts generated will be automatically stored and you can always view them in he Alert Monitor. In fact, after you take action, you have to schedule a program to delete those alerts.
Please refer this white papaer which gives one example of Database alert type and how you can set up an alert profile. Hope it may be useful for you.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/supply-chain-management/implementing%20the%20alert%20monitor%20functionality%20using%20macro%20alerts%20to%20highlight%20custom%20alert%20situations%20in%20apo%20dp.pdf
-Srinidhi

Delete an alert

Hi,
How can I delete an alerte
Thanks in Advance

Dear Malika,
In Business One, It is not possible to delete alerts once they have been saved. You can use the following workaround:
-An alert can be set to not 'Active' by unchecking the 'Active' box.
-In order to avoid having too many alerts in the system, existing alerts that are no longer active/relevant can be renamed and modified.
Kindly check note 1057689 for more information.
Regards,
Varun
SAP Business One Forum Team

My iMac is slow, and I don't know how to "delete cookies" etc. as I could do on my PC. Can you help me?

Please tell me how to "delete cookies" or whatever its equivalent would me on my iMac. It is slowing down.

It's best to describe the problem in as much relevant detail as possible, rather than what you think is causing it or how you think it should be solved.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

How to delete file from client machine

Hi all,
we are using the DataBase: oracle:10g,
and forms/reports 10g(developer suite 10g-10.1.2.2).
can anybody help me how to delete the file from client machine in specified location using webutil or any
(i tried with webutil_host & client_host but it is working for application server only)
thank you.

hi
check this not tested.
PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
IS
-- Open a stored document --
LC$Cmd Varchar2(1280) ;
LC$Nom Varchar2(1000) ;
LC$Fic Varchar2(1280);
LC$Path Varchar2(1280);
LC$Sep Varchar2(1) ;
LN$But Pls_Integer ;
LB$Ok Boolean ;
-- Current Process ID --
ret WEBUTIL_HOST.PROCESS_ID ;
V_FICHERO VARCHAR2(500);
COMILLA VARCHAR2(4) := '''';
BOTON NUMBER;
MODO VARCHAR2(50);
URL VARCHAR2(500);
Begin
V_FICHERO := V_ID_DOC;
LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
--LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
LC$Path := 'C:';
LC$Fic := LC$Path || LC$Sep || LC$Nom ;
If Not webutil_file_transfer.DB_To_Client
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
Raise Form_trigger_Failure ;
End if ;
LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
If LN$But 0 Then
Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
LN$But := Show_Alert( 'ALER_STOP_1' ) ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Raise Form_Trigger_Failure ;
End if ;
If Not webutil_file_transfer.Client_To_DB
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
NULL;
Else
Commit ;
End if ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Exception
When Form_Trigger_Failure Then
Raise ;
End ;sarah

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

How to delete THE WHOLE Reading List of Safari iOS 8 in one shot?

I know how to delete individual items one by one by sliding them to the left, I know how to clear their cache in Settings and I know how to clear Safari's history but nothing clears the whole Reading List in one stroke.
How do you do?
Thank you very much in advance for your answer.

Please read this book.
http://www.amazon.com/s?ie=UTF8&rh=i%3Astripbooks%2Cp_27%3AMatthias%20Zierke&field-author=Matthias%20Zierke&page=1
Rg,
Harshit

How to delete the one of cost centers in Splitting Structure(OKEW)?

Dear All,
I have a question about Splitting Structure as below? Could I get favor from you? Thanks a lot.
How to delete the one of cost centers in Splitting Structure(OKEW)?
Jocha

Hi Chang
Welcome to SDN! Its our pleasure to help you here
Step 1: Select your Cost Center in OKEW which is assigned to the Splitting Str
Eg: Cost Ctr 1001 is assigned to Splitting Str Z1... Tick the Check box against 1001 under Z1 Splitting Str
Step 2: Do a Single Click on the text "Non Assigned Cost Centers"
Step 3: Press Shift +F6 (Or Click on the Assign Button, next to the Pencil icon)
Br, Ajay M

ADF Desktop Integration : How to delete the table in Excel?

Hi,
I am using Jdev 11.1.1.3.0 and Excel 2007 for Oracle ADF DI, I had created an ADF table using pageDef file in the excel. Now I wanted to delete that table and use a different pageDef file.
I could not find a way to delete that table.
I deleted full row of tables and then I used different pageDef file and created a new adf table. But when I am running this version of excel, I am getting runtime exception and excel is getting corrupted.
My question how to delete the table not corrupting the Excel.
Thanks
Pavan

Pavan,,
Welcome to OTN.
You can delete the table by selecting the top left column (of the table) and then select delete from the ADFdi tab.
Refer the documentation for more info.
http://docs.oracle.com/cd/E17904_01/web.1111/e10139/get_start_dev_tools.htm#ADFDI608
-Arun

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to delete an alert

Similar Messages

Maybe you are looking for