How to delete an appended structure

Hi everyone-
  I have appended a structure to MC02M_0ITM (2lis_02_itm) and now I want to delete this. Can somebody tell me how can I do this?
Thanks.

Hi Punzu,
You need not delete the appended structure, rather just check the "Hide field" column against the field in your datasource(RSA5 or RSA6 in R/3).
This excludes the field in the extraction structure from the data transfer . The field is then no longer available in BW for determining transfer rules and therefore cannot be used for generating transfer structures.
So this accomplishes the task which your are looking for in a wise manner, because if in the future when u require the same field in ur transfer structure u can just uncheck the "Hide field" option and use it.
Hope this helps
Samarasimha

Similar Messages

  • How to delete the Append Structure in VBAK Table.

    I wrongly appended the structure to the standard VBAK table.  Because of this SAP Kernel is get damaged.
    So, i cannot able to acces my datasource in R/3 side.
    can anyone help me to resolve this problem

    Hi,
    Welcome you post on the forum.
    However, this forum is for SAP Business One user only. It is not related R/3. Please close your thread and post it on a proper forum.
    Thanks,
    Gordon

  • Delete customs append structure issue

    Hi Gurus,
    I added a customs append structure with a 'YY'  field in one of LO extractr structures.
    Now I don't need that field, I need to delete that customs append structure and field from the extract structure. I deleted that 'YY' field but I don't how to delete customs append structure which one I created.
    Please advice ?
    Thanks
    Liza

    Goto SE11 -> Give append structure name ..should be ZA*  and select delete option , This will delete append structrure ref. from extract structure.
    Hope it helps..

  • Delete the appended structure of an Extract Structure

    Hi All,
    I have appended the extract structure of vendor text with additional fields. Now i would like to delete my appended structure along with the fields of my appended structure but i am unable to find the option to delete this. Kindly guide me how to go about it?
    Thanks,
    P.S

    Hi,
    Goto SE11 -> Put append structure name ..should be ZA* .. and select delete option , This will delete append structrure ref. from extract structure.
    Hope that helps.
    Regards
    Mr Kapadia

  • How to delet OM Tree structure

    Hi,
    Could you please tell me how to delet OM tree structure which i created in simple maintenance method.
    Though i delete frm edit - delete from the bottom of the screen its still reflecting so any other permanent way delete the tree structure.
    Thanks
    Vibin

    Hi,
    Try deleting all relationships etc assigned to the object then delete the object completely.
    Salil

  • How to delete the "Appended" custom structure in VBAK?

    Hi All,
    I have appended a :
    structure ZZLAND1
       Component: ZZLAND1 (Domain: LAND1).
    Now I want to delete the structure that I just appended, so I did:
    1.  SE11 -> VBAK -> Append Structure Button -> Select ZZLAND1 --> Delete
    2.  To further ensure that the table is adjusted, I also executed SE14 -> Adjust table
    but I have an anonymous error in the DataBaseLog:
    Table VBAK could not be activated
    (E- Table VBAK (Error adjusting the database) ) [See here the details of dataBase error log|http://www.megaupload.com/?d=TZP3PV9J]
    so I did another option,
    1.  SE11 -> Data Type -> ZZLAND1 --> Delete
    2.  Execute SE14 again,
    And still have the same error.
    This thread is close relevant to [Add new field in VBAK|Runtime Error in SE16 after adding fields in VBAK (ABAP-SD);.  Now I want to revert back my changes but I cannot now.
    Anyone, please enlighten?
    Thanks

    Solution: "I used other laptop" to modify VBAK.
    1. SE14
    2. SE11>VBAK>Append Structure..
    3. Select the structure > Delete
    Weird: in my laptop it is always not refreshing.

  • How to delete proxy Objects/structure in R/3

    Hi Experts,
    In my scenario i generated ABAP proxy. I want to delete that proxy now. I am selected the particular proxy and i deleted. but here only service interface only deleting. not deleting all objects like message type and data type and proxy generated objects are not deleting.
    While i am deleting it was allowing me to delete only root object. under root table structure and datatype/message type objects are not deleting. here even i deleted lock entrys also.
    Here my question is how to delete all proxy objects. please give me your valuable suggestions.
    thanks
    Srini

    refer this Problem in deleting Proxy Objects that talks about the same issue .

  • HOW TO DELETE AN INFO STRUCTURE)LIS)

    PLEASE TELL ME HOW TO DELETE AN LIS AND IT'S IMPACT ON THE SYSTEM.

    Hi Sachin
    I am not sure why you want to delete LIS infostructure in R/3 system.
    If you do not need data for particular extract structure in BW then I can tell you how to delete the data for that extract structure on R/3 side:-
    Go to Tcode LBW2 -> enter the LIS infostructure name and using option buttons & delete version button you can delete the data in delta tables first and then infostructure table.
    Regards
    Pradip

  • Deleting append structure

    hi guru's
    is there any way to delete the appended structure? i enhanced a structure by appending it. i want know the way how to delete this append structure. the append structure has a field. it is populated by user exit.i have developer accesskey.
    thanks in advance. waiting for reply
    regards
    anil

    Hi,
    Deleting the append structure , you can Delete it directly from SE11 using the APpend structure name.
    No need of Access key, Because it is Custoimer name space.
    Regards
    vijay

  • Delete append structure

    I have appendead a structute to an extract structure but now I want to delete that structure which is appended.Please tell me how to delete an append structure.

    Hi Vaishali
    Adding to Kishan's inputs, incase the append structure has typical fields like amount remember to <b>adjust the table</b> back via transaction SE14.
    Kind Regards
    Eswar

  • MARA table going DUMP due to append structure

    Hi all,
    I have created the structure and i have Appended  to MARA table. Since then MARA Table is Partially  Active State. So, i tried to delete the structure. But i am unable to delete that Structure, because it was used in MARA Table. Even i tried SE14 Transaction also.Here i did Adjust and Activate table, But it is showing SHORT DUMP. Even if check the Error in SE11, it is showing "No inconvience found, but i activate the table again it is going to dump ".
    How to solve this .
    My requirement is to bring back the MARA table into its origional state. and how to delete the Appended structure in MARA table ?
    Thanks in advance
    KR

    Hi,
       An APPEND structure is a DDIC structure that is assigned to a single DB table. In the ABAP dictionary (SE11) you call the corresponding DB table and create the APPEND structure for this table.
    In which scenario do we create APPEND structures? Obviously, the attributes available in the DB table are not sufficient to meet your requirements. Thus, you append the missing fields to the table.
    http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
    Regards

  • How to delete append in structure of extractor?

    Hello
    I decided to delete all the fields from append of the structure of extractor. I dont need append at all.
    Once I delete all the fields the system generates an error message :
    Neither foreign key nor search help maintained for this append
    Append has no fields
    Can somebod tell me how to delete entire append?
    Thanks

    Go to se 11 ...give your structure name and delete it from there.
    Thanks...
    Shambhu

  • How do I find the name of an append structure?

    Lets say I want to add a field to the component BT115QS_SLSQ (Sales quote search).
    I enhanced the component and the view (SlsQuotSQ).
    If I go to the context nodes and the context node BTQSLSQUOT.
    I can see the implementation class ZL_BT115QS_SLSQUOTESQ_CN00.
    If I go inside of this class I see a tab attributes with a field called base_entity_name
    the initial value is BTQSlsQuot for this attribute.
    But how would I ever know that the append strcture name for this component / view is CRMST_QUERY_SLSQUOT_BTIL ???
    I only displayed it above becuase I did endless searches and realized this is the one.  But is there an easier way to find the append strcture name so that when I go to SE11 I can either copy and paste it in or type it in.  Is there somewhere in the workbench or anywhere which tells me its in this case CRMST_QUERY_SLSQUOT_BTIL ???
    How do I find this name ?

    Edit:
    FOUND THE ANSWER!
    Here is a complete document I put together for anyone else with this issue.
    I would really love to blog SAP issues like this because there seems to be very little help on the forums for the CRM Web client side :(...
    Purpose
    The purpose of this document is to explain how to find the append structure and how to use it.
    Problem
    Letu2019s say I want to add a field to the component BT115QS_SLSQ (Sales quote search).
    I enhanced the component and the view (SlsQuotSQ).
    If I go to the context nodes and the context node BTQSLSQUOT (this is in the context nodes area)
    I can see the implementation class ZL_BT115QS_SLSQUOTESQ_CN00.
    If I go inside of this class I see a tab attributes with a field called base_entity_name
    the initial value is BTQSlsQuot for this attribute.
    That is the key here, in order to determine the append structure to use when going into SE11 you need to know the name of the base_entity_name.  In the above case the base entity name is BTQSlsQuot.
    That means you need to use BTQSlsQuot
    Step By Step Procedure
    1)     Get the base entity name as described above
    2)     Once the base entity name is given go to transaction GENIL_MODEL_BROWSER
    3)     Enter a component or a component set like so:
    a.     
    4)     Press the green check box
    5)     For model select u201CDynamic Search Objectsu201D (for this particular case because we are trying to add a field to a dynamic search)
    6)     Select u201CDynamic Query Object BTQSlsQuotu201D
    7)     Once you expand this you should be given the attribute structure as shown below:
    Now you have the attribute structure name CRMST_QUERY_SLSQUOT_BTIL
    How To Use Append Structure
    Now that youu2019ve found the append structure to use it follow these steps:
    1)     Go to SE11
    2)     Click radio button Data type
    3)     Enter CRMST_QUERY_SLSQUOT_BTIL
    4)     Click display like so:
    a.     
    5)     Click the u201Cappend structureu2026u201D button at the top right
    6)     Add the field as a ZZ field and enter the data type like so:
    a.     
    References
    No search available for field //BTOPPORTH/EXPREVENUE (STRUCT.EXP_REVENUE) ?
    Field Available in Results List But Not Available In Search Criteria?
    Edited by: Hermiz Jon on Jan 6, 2011 5:51 PM

  • Remove Appended Structure from standard table

    Hi Experts,
    I have appended a Z structure to table VBAP.
    I want to remove it now. How can I do?
    Rajiv Ranjan

    Hi Rajiv Ranjan,
    to delete the append structure from the database table, follow the points
    1. Goto se11
    2. enter your append structure name.
    3. press delete
    4. It will delete this append,
    also in the original table/structure
    where it is used, AUTOMATICALLY.
    5.now the data base table VBAP is partially active so
    go to tcode se14 and give the table name and click on EDIT button
    and click on ACTIVATE AND ADJUST button.
    then it will work.
    if it is not possible reply to me.
    regards
    sreenivas

  • Error while appending structure into BSEG Table

    We had appended BSEG table with a ZSTRUCTURE to enable Custom field in MIRO. Subsequently there was a change required in the appended field. After Changing the field there was adjustment required to activate the appended table . However due to slow system performance during that time the Adjustment SE14 timed out. And created inconsistency in BSEG table.
    If I Do the Table adjustment now it is showing below error.
    We tried to delete the append structure also but the structure is not appearing in the append structure list to delete.
    Even if we try deleting the Z structure from se11 it is throwing below error.
    Any one could help me out to resolve this..

    hi Ramesh,
    Please First Check if the Database version and disctionary version are in sync.
    Also, it could be the case that you would have enhanced an already existing Append stucture. which might be being used in other BKPF dependent tables.
    Please check

Maybe you are looking for