How to delete an entry in calendar

Can you please tell me how to fully delete an entry in Calendar.

goto calendar> look for the event you entered> edit event (upper rt corner)> scroll down> Delete event

Similar Messages

How to delete one entry in "documents & data" of icloud?

It seems some application saves settings in "documents & data", but the application has been removed already.
I do not know how to delete the entry.
Anyone can help me?
Thanks!

Hello mende1,
I follow your suggestion many times but it does not work still.
The record "Ruler for iPad and iPhone..." fails to disappear.

How to delete unwanted timezones from Calendar app on Yosemite?

I upgraded to Yosemite and one of the problems I had with Calendar App had something to do with Time Zone.
I realized that Calendar added California time as default. So now I want to delete the unwanted time zone, but cannot find a way to do so.
How does one remove or uncheck a time zone in iCal (Mountain Lion)?
I found this forum and tried, but as the last person who posted said, it doesn't work on Yosemite.
Does anyone know to delete unwanted timezones from Calendar App on Yosemite?
Thanks.

Thank you for your response.
However, I am not asking about how to change the timezone on Mac. I'm asking about how to delete unwanted timezones on Calendar app.
Here I have 2 Pacific Time's. They are basically the same, but sometimes my computer choses one of the other without my intention. And when it does, it keeps showing (PST) on next to the starting time which I do not want. In order to avoid that, I'd like to delete "Pacific Time (America/Los_Angeles)". From the link you provided, I'm not finding the solution to this. I might be looking at a wrong spot and if so please be patient to guide me through.
If my question still doesn't make sense, please click the link to the solution for the same problem on Mountain Lion in my original question. You might understand my question better from it.
Thank you.

How to delete properly a group calendar ?

Hello,
How to delete properly a group calendar ?
We have not problem to use webcalendar, but when we try to subscribe us with ical, we have encounters a access problem authorisation.
There's only one group that make problem.
The others work perfectly.
Thanks, Chris

_Calendaring Services : Enabling iCal Service for a Group_ : Web Group Calendars
With a web browser, my Wiki group , "Calendar group"and blog service are fine. In "Calendar", i can create event with any date and time. but with iCal application when i try to subscribe to my group (http://ical.servername:8008/calendars/groups/mygroupname/calendar/), i have an error:
"(sudoers)wikiserver as (groups)mygroupname"
"REPORT /calendars/groups/mygroupname/calendar/ HTTP/1.1"
"REPORT /calendars/groups/mygroupname/calendar/ HTTP/1.1"
"(sudoers)wikiserver as (groups)mygroupname"
"REPORT /calendars/groups/mygroupname/calendar/ HTTP/1.1"
[caldav-8009] [AMP,client] GET /calendars/groups/mygroupname/calendar/ HTTP/1.1
[caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
[caldav-8009] [AMP,client] Allow proxy: user 'wikiserver' as 'mygroupname'
[caldav-8009] [AMP,client] REPORT /calendars/groups/mygroupname/calendar/ HTTP/1.1
Message was edited by: eXpresso

How to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

how to delete forecast entries with zero current and original qty from a particular forecast set which span across multiple forecasts

Hi,
There is no way to delete those records selectively from front end.
The best possible way is to delete the records from MRP_FORECAST_DATES tables from backend.
Hope that helps!!
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

How to delete the entries in the given field box

Hi Every One,
How can I delete the entries which I have given in example SE37 box.
When I press Backspace button the entries which I have given will appear so I want to delete these entries.
With Regards,
Venkat

Hi,
Goto ==> Customize Local Layout (Alt + F12) , then Options ====> LocalData=======> Clear History
This process should clear your history.

How to add the entries and how to delete the entries from custom Z-table?

Hi Experts,
My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
Here how to add the entries from program to Z-table.???
And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
Could you please guide me the logic how to crack this???
Let me know if you need more Info
Thanks
Sanju

Hi Sanjana,
What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
*Insert Statement
INSERT dbtab
Syntax
INSERT { {INTO target VALUES source }
| { target FROM source } }.
Effect
The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
System Fields
The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Meaning
0 At least one row was inserted.
4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
The INSERT statement sets sy-dbcnt to the number of rows inserted.
Note
The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
*Modify Statement
MODIFY dbtab
Syntax
MODIFY target FROM source.
Effect
The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
System fields
The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
sy-subrc Meaning
0 At least one line is inserted or changed.
4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
The MODIFY statement sets sy-dbcnt to the number of processed lines.
Note
The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
Hope it helps...
P.S. Please award points if it helps...

How to delete duplicate entries in table for the object DNL_CUST_BASIS2

Hi All,
I am trying to download the object DNL_CUST_BASIS2.
In the SMQ2 the status is SYSFAIL.
I checked in the ST22 for dumps.It says about the error while accessing the table T006.
While analysing this,i found some duplicate entries in the related tables of this object.
Can somebody help me how to delete these duplicate entries?
Thanks,
Senthil.

Delete them directly from the table using se16:
select the entries in the classic view (not ALV or grid view).
activate the debugger.
press the view button. --> you'll enter in the debugger
press F7
locate the sy-ucomm variable & change it to "DELE".
press F8
delete the entries.
Trick-shots
but it works!
Michael.

How to delete duplicate entries in address book

Is there an easy way to delete duplicate entries in Address Book?

I have an iPhone where I create new contact details and a MB Air running OX X 10.7.3
In Address Book I see duplicate entries across the whole book. The other day I was traveling without my MB and needed to urgently reach someone who's number I knew was in my iPhone contact list for sure but searched and search and couldn't find it.
Turns out that when I had been going through the Adress Book on the MB Air trying to eliminate some of the duplicates I had chosed --without even knowing it or realzing it-- the card that I guess sync with my iPhone. It was gone. Sure enough, when I got back and looked it up on the MB Air it was still there not syncing to my iPhone.
I have used Address Book / Card / Look for Duplicates ...
I have also followed the Help suggesting and pressed Control / select to highlight two duplicate cards and even though the First / Last / Company / phone numbers / etc. are all the same I get the message: "The cards could not be merged because they came from different accounts."
I have checked with guys from the office who have the exact same problem with no idea how to solve the problem.
Is it that in order to use Address Book on both an iPhone and an OS X machine you've just got to be smarter, more sophisticated, more IT oriented?
Seems like a pretty easy thing not to be struggling with.
I should mention that I was a Mobile Me subscriber and now use iCloud which I'm sure has something to do with all of this.
But it seems pretty basic to me. If I have an Address Book it should synchronize between OX X and IOS.

How To delete Service Entry Sheet

Dear Experts
How to Delete the Service Entry Sheet , or cancellation ,there is no Material Document generated for that entry.
Actually we have making the Service Entry through ML81n but system does't make Document Nos, directly Entry sheet nos is there.
Rgds
Pankaj Agarwal

Hi Pankaj,
Enter t-code ML81N.
Enter your service entry sheet number.
Than click on change button of header level.
Than click on Revoke acceptance.
and click on save button.
After click on save button. Second time click on change button.
So system display you deletion flag indicator like dust bin.
Than set it(click on deletion flag button) and click on save button.
Regards,
Nani.

How to delete table entries with SE16 in debugging mode?

We are trying to delete some table entries which cause our InfoPackage short dumps in BW system. The problem is that we can only see the Display menu item with SE16 and the Delete menu item is dimmed that we are unable to conduct the deletion. SAP Support suggest to use debug with SE16 to do the deletion, but we can't figure out how!
Anyone's idea is greatly appreciated!

Then you are not at the right place.   Lets start at the begining.
Go to SE16.
Enter table name.
Hit F7.
Enter selection criteria.
hit F8.
Double click the specific record that you want to delete.
In the transaction code field at the top, enter "/H" and hit enter. Debug is switch on.
Now hit enter again.
You should now be in debug and you should see this code..
form set_status_val tables ntab structure x031l
                    using code name next for_lines.
field-symbols: <field>.
refresh exclude_tab.
if code = 'SHOW'.
    set titlebar 'TAB' with name 'anzeigen'(100).
elseif code = 'EDIT'.
    set titlebar 'TAB' with name 'ändern'(101).
elseif code = 'INSR'.
    set titlebar 'TAB' with name 'einfügen'(102).
elseif code = 'ANVO'.
    set titlebar 'TAB' with name 'einfügen'(102).
elseif code = 'DELE'.
    set titlebar 'TAB' with name 'löschen'(103).
Notice that there is a field called CODE in the IF statement.
Now enter the word "CODE" in the field names list, change the value to DELE and click the pencil. Hit F8. Now you can delete the entry.
Regards,
Rich Heilman

How to delete an entry from table pat10(standard sap)

hi experts!!
how can i delete an entry in the database table pat10. This is a transparent table.
I need a solution quickly
Thanks
Anil

Hello,
Table PAT10 contains OCS semaphores. If there is any entry a transport is either about to be imported or the import process did abend.
You should contact your admins instead of deleting anything.
Regards,
Thomas

How to delete lock entries generated by the function module "BAPI_OBJCL_CHANGE"

Hi experts,
I'm now trying to make an add-on program
which updates material master information by the background job.
To update the "Classification" view of material master,
the program calls the function module "BAPI_OBJCL_CHANGE".
If the "RETURN" information is valid,
then the program calls "BAPI_TRANSACTION_COMMIT" (with the "wait" parameter 'X').
Contrary to my intention,
lock entries generated by the function module "BAPI_OBJCL_CHANGE" remains after "BAPI_TRANSACTION_COMMIT".
As a result, the material updated remains locked until the add-on processing ends.
To shoot this trouble, I read some SCN discussions below:
<<lock unlock record>>
⇒ As I wrote above, I checked the parameter for "BAPI_TRANSACTION_COMMIT".
<<BAPI_OBJCL_CHANGE Lock Error !>>
⇒ I cannot call the function module "BAPI_OBJCL_CHANGE" with "IN UPDATE TASK" option
because of "BAPI_OBJCL_CHANGE" attributes.
("BAPI_OBJCL_CHANGE" is not a "Update Module".)
How can I delete lock entries generated by the function module "BAPI_OBJCL_CHANGE" ?
Thanks in advance.
Tom

I quess/hope you want to remove locks in you caller program and not locks required by the update task processing to insure database consistencies...
Did you use the WAIT option in the commit FM, else if there are no other locks in your called program a call of FM DEQUEUE_ALL could solve your problem.
Regards,
Raymond

How to delete the entries in internal table

Hi Experts,
I have 2 internal tables ,
if i find any same entries of 2 internal tables, i have to delete that entries in first internal table.
Regards,
Srinivasu

hi check this..
report .
data:begin of itab occurs 0,
     f1 type c ,
     f2 type i,
     end of itab .
data:begin of itab1 occurs 0,
     f1 type c ,
     end of itab1 .
     itab-f1 = 'A'.
     itab-f2 = 12.
     append itab .
     itab-f1 = 'b'.
     itab-f2 = 12.
     append itab .
     itab-f1 = 'c'.
     itab-f2 = 12.
     append itab .
     itab1-f1 = 'A'.
     append itab1 .
loop at itab1 .
read table itab with key f1 = itab1-f1 .
if sy-subrc = 0.
delete itab where f1 = itab1-f1 .
endif .
endloop.
loop at itab.
write:/ itab-f1,itab-f2.
endloop.

How to delete the entries from NAST table

Hi,
Please help me out by providing any function module that delete's the entries from hte NAST table.
Regards,
Kiran.L

REPORT ZSCD_TEST13.
delete from nast where VSTAT = '1'.
=====
If you see the FM : NAST_DELETE_OBJECT, its only useful when NACHA = 7 (i.e. message transmission medium = Simple Mail)
For others its not useful.
We had similar issue few days back and after long RnD, we straightaway deleted the entries using the Zprogram.
regards,
Edited by: Pranu Pranu on Aug 19, 2008 1:42 PM

How to delete an entry in calendar

Similar Messages

Maybe you are looking for