How to delete an object from a change master?

I have a situation where a PDM has copied a route (task list) that was tied to a change master and brought it over by mistake, the route was also copied to the wrong group number and counter. What I want to do is have the route deleted and recreated with it's own group number and counter 1, however because it is linked to a change master it keeps pulling in that same group number. Any idea how to correct this or remove the material from the change master, we've tried to delete the object but get the message that not all objects were deleted and it is still there.
Thanks in advance.

HI sathish,
1. If the old request is release,
   then we cannot do anything.
(There is no point in changing that old request)
(bcos its already released)
2. what can be done is that
   u save once again the objects,
   and it will once again ask for new request.
3. this time save it in new request
regards,
amit m.

Similar Messages

How to delete an object from a request?

friends,
      There is an exit developed to include a subscreen in a standard screen. The layout, flow logic and some include files are saved in different requests..i saved everything in one request and tried to release it...but it's not getting released.."Repair so, how to delete the object(s) from all the old requests where it is saved? when i attempt to delete the request, it is not allowing saying that changes can't be made to a released request. any other options available? how to go about with this? thanks all.

HI sathish,
1. If the old request is release,
   then we cannot do anything.
(There is no point in changing that old request)
(bcos its already released)
2. what can be done is that
   u save once again the objects,
   and it will once again ask for new request.
3. this time save it in new request
regards,
amit m.

HOW TO USE FUNCTION Deletion of Requests from the Change Log IN PRCSES CHAN

Respected all
i used Deletion of Requests from PSA from the prcess chain and found good results, now i have only one request at the psa and thus i am doing good space utililisation. but when i am using Deletion of Requests from the Change Log i am not getting any changes in the request of dso. kindly let me know how to use this 2nd function.
thanks
abhay

Hi Mahodaya,
As per SAp standards its good to delete the requestes that are no longer needed for the delta update and no longer used ffor inti from the change log table and the data is loaded already in to DSO.
Goto RSPC
Click on create New PC -> enter the PC name n long descp
Next we need to define the start process for the PC.Maintain the start variant process.save n come back.
for deletion of change log we have option in the Other BW Processes -> deletion of requestes from change log
Once u select the option we get a dialoge box here we need to create the variant for the process enter the process variant n long descp. cick ok.
Next in the maintenance screen for the deleting the request from change log table will appear.
Enter the selection patterns to which the requestes should be deleted from the change log.
In the maintenance screen, select one or more Data Store objects for which requests are to be deleted from the relevant change log tables under Data Store Object column and select theInfo Area of the corresponding Data Store Objects under Info Area
If you select the first check box exclude selction pattern, this means that del of requests from change log table will be ignored.
or
We can delete the requests which are Older than N-number of days (or) date in the above screen. For this one, enter the number of days (or) date in the filed Older than .
OR
If we want to select the requests with a certain status then we can also do in the above screen. We can select the following status indicators from the above screen.
Delete Successfully Updated Requests Only -This status will delete only requests which
are successfully updated into corresponding Data Store objects.
Delete Incorrect Requests that were not Updated - This status will delete only incorrect requests which are not successfully updated into the corresponding Data Store Objects.
Delete Activation Requests only, No Load requests- This status will delete only the activation requests (requests that begin with ODSR_... ). No load requests are deleted.

BDC to PFCG (Delete Authority Objects from Roles.)

When we try to change an authority object it gives an error message saying that 'This authority object is used in roles XXX'.
To remove Authority Ojects from roles, transaction PFCG is used. But the problem is that BDC is almost impossible to PFCG.
Is there any way you can suggest us to change an authority object when it is assigned to a role or how we can BDC delete authority object from a role or a function/badi we can call to achieve this.
This is a very high level question.

Hi
U should consider PFCG trx is enjoy trx so it's not suitable for BDC, what doesn't mean you can't do a BDC program for that trx but it won't be easy.
Anyway you can know the users assigned to certain profile reading table AGR_USERS. I believe PFCG shows them sorted alphabetical, so you can know the position where an user should be, after u should use PAGE UP and PAGE DOWN command to scroll the table control.
Max

HT1688 how to delete my emal from my apple iphone

how do i get my email off of my phone that im not using but it is conected to my oter one

right click on the object and say delete, then go to change list and activate it.
or do u want to delete whole software component version.
How to : Delete Software Component from Integration Builder
chirag

How to delete all objects in a package?

Hello,
I've seen a similar question here. But is there a tool or a smart way to delete all objects in a dev class or a transport request?
Best Regards
Volker

These are really 3 questions??
1. To delete objects in a request there are a number of ways, here is one:
Position cursor on modifiable request.
Double click on request and choose 'Objects' tab
Choose object line you want to delete and click 'Delete'
Save your changes.
2. To delete objects in a Dev Class:
Go to work bench --> edit object, Class and give your class name, you will see delete option at the bottom of the screen.
3. How to delete all objects in a package:
here is a link with the steps you need for this: http://benxbrain.com/en/index.do?onInputProcessing(brai_object_thread)&001_threadid=0000161442&sysid=WP5&pgmid=R3TR&object=DOMA&obj_name=DEVCLASS&child_param=

How to delete multiple rows from ADF table

How to delete multiple rows from ADF table

Hi,
best practices when deleting multiple rows is to do this on the business service, not the view layer for performance reasons. When you selected the rows to delete and press submit, then in a managed bean you access thetable instance (put a reference to a managed bean from the table "binding" property") and call getSeletedRowKeys. In JDeveloper 11g, ADF Faces returns the RowKeySet as a Set of List, where each list conatins the server side row key (e.g. oracle.jbo.Key) if you use ADF BC. Then you create a List (ArrayList) with this keys in it and call a method exposed on the business service (through a method activity in ADF) and pass the list as an argument. On the server side you then access the View Object that holds the data and find the row to delte by the keys in the list
Example 134 here: http://blogs.oracle.com/smuenchadf/examples/#134 provides you with the code
Frank

HOW TO Delete Unused Media from FINAL CUT PRO

*HOW TO DELETE UNUSED MEDIA FROM HARD DRIVE IN FINAL CUT PRO.* Keywords: disk disc drive space remove compressor
SUMMARY:
Say your original clip is 10 gigs, you can use only what you need and delete the rest from your hard drive. I know people on the forums say to just buy another hard drive, NO! It took 2 days to figure out but here it is!!! Email me if needed at [email protected]
QUESTION:
I captured 1 hour of video at a time and now want to delete from my hard drive all the parts I don’t want to use. I have 300GB of junk on my hard drive and I only want to use a few scenes using a few megabytes, so that I'll get most of my 300GB back!!!!
ANSWER:
In final cut on Mac, click on one small clip (to get familiar with process), go to “file”, “export”, then “using compressor”. This will open compressor software. Your file will open in the left top window. Then you need to batch the job or jobs. IMPORTANT: I’ve also solved the Compressor problem when you press “submit” to a batch and it states “Cluster: None”. Search forum for “In compressor you experience what I have”.
<Edited by Moderator>

Part of the problem could lie in the fact it's an imovie project coming into FCP, wouldn't rule that out. Second my be the terms you use and what you expect to happen. For example, a subclip is just a smaller clip subbed from a larger clip. It has nothing to do with media management. But you can media manage a subclip and delete the unused media.
Try this (be sure to back up the original clip first). take a long clip into the viewer, make an IN and OUT duration of like 30 frames and then subclip that, Modify > Make Subclip. a new subclip will appear in the browser with a torn clip icon and the name Subclip. Right click on the subclip and choose Media Manager.... Check the Delete unused media from duplicated clip. As you toggle that the green Modified bar at the top change from the full clip size to a tiny modified size. If it does not then one of two things ... user error or the system is screwed up. That's the easiest way to test media manager.

How to remove unused objects from the webcatalog In OBIEE11g

Hi,
I want to delete unused objects from obiee11g catalog, i know in obiee10g it's working fine (i.e: we can do it via manage catalog then delete the unused objects) is there any way to do it automatically like RPD utility --->removing unused objects from Physical layer in RPD
fyi: I don't want to delete manualy. i need somethink like button/link to find unused objects(report,filter,folder..etc) from my obiee11g catalog.
Thanks
Deva
Edited by: Devarasu on Nov 29, 2011 12:06 PM
Edited by: Devarasu on Nov 29, 2011 3:15 PM

Hi,
Checked with Oracle Support team and confirmed below points
--> incorporated into the Current product and consider as BUG it may resolve future release
--> Currently there isnt any automatic method to remove the unused objects like reports, filters,folder etc from catalog.
Treated as Bug
Bug 13440888 - AUTOMATICALLY REMOVE OF UNUSED CATALOG OBJECTS FROM WEBCATALOG
FYI:
SR 3-4984291131: How to remove unused objects from the webcatalog in obiee11g
Thanks
Deva

How do I move objects from other package to a newly created one?

How do I move objects from other package to a newly created one?
Thanks!

Dear Anthony Pham ,
for changing objects from one package to another package
open that object for example Report
open the report and than click GOTO select OBJECT DIRECTIORY ENTRY
than it will open a popup in that popup click the change and give the new package
Thanks
Surendra

How to delete a view from a enhanced component?

I wish to know the possibility of deleting a view from a enhanced component.
I have two components IUICMD & IUICMRD. I have enhanced 4 views in the first component IUICMD using enhancement set ZCRM_ENHSET. There is no problem with that. But when i try to use the same enhancement set ZCRM_ENHSET for enhancing the second component IUICMRD, it's enhanceable in enhancement set. But 2 views IUICRMD/Meterreading & IUICMRD/MainVS is also copied to first component and available as enhanceable views in First component.
I want to delete those views from the first component. Let me know How to delete a view from a enhanced component?
Regards,
Prabahar

Hi Raju,
If you do not need those enhancment views in any of the components ( ie IUICMD & IUICMRD ) , then open the BSP application in SE80 , under controller, there will be files with extension .do as yourviewname.do ...delete those !! These will not dele the Z classes....but just deletes their presence from the BSP...
I would suggest following approch :
1) go to SM34 , open BSPWDVC_CMP_EXT....Select you enhancement set and click on enhancement defination in leftside panel.
2) now select the IUICMRD and CLICK ON CONTROLLER SUBSTITUTION...
3) now you will see all the enhancement available for that component...Delete the entries for those two views from there...
This is just deleting the entries...this does not delete any objects from the system.
4)Now click on Back arrow, and delete the entry for IUICMRD...save.
5) Now open BSPWD_CMP_WD for IUICMRD...you will get the enhance component button... You can now freshly enhance this component..
6) We did not touch to the entries for IUICMD in the BSPWDVC_CMP_EXT...So now if you open the component IUICMD in workbench with you enhancement set...you will see all the enhancement..including those two views which you wanted to delete from IUICMRD.
7) If you want to delete the enhancement for these views...then right click on the enhance views and select Delete enhancement...You will get a popup listing IMPL, CTXT and CN classes, select all Z entries in the pop up and those all will be deleted physically from the system...and thus view enhancement will be rolled back...
All the best !!
Thanks & Regards,
Suchita
If you are not sure, you can create copy of IMPL, CTXT and CN classes in se80 and then proceed for deletion..You can also make copy of entire BSP in se 80 before deletion...

My sister inlaw gave me her iphone3 and when i try to update a app it says that i must sign into her accound when i have already created my own apple id n put it in, how can i avoid that from happening/ change it?

my sister inlaw gave me her iphone3 and when i try to update a app it says that i must sign into her accound when i have already created my own apple id n put it in, how can i avoid that from happening/ change it?

You should do this to make this your iPhone and remove her info...
If desired, move photos/videos off the Camera Roll: http://support.apple.com/kb/HT4083
If desired, backup the device to iTunes or iCloud: http://support.apple.com/kb/ht1766
Then, on the device...
Settings > Messages > iMessage > Off
Settings > FaceTime > Off
Settings > iCloud > (scroll down) Delete Accout (this only unregisters and deletes it off the device)
Settings > iTunes & App stores. Tap the AppleID and sign out.
Settings > General > Reset > Erase All Content and Settings
Unregister the device at https://supportprofile.apple.com
More Info... http://support.apple.com/kb/HT5661

How to delete Software Component from IR.

Hi Experts,
I have imported Software component from SLD in Integration Repository. How to delete Software Component from Intetegration Repository. Does it possible?
Thanks
siva

1. Design:Integration Builder
Double click on the Software Component Version
In the display window, navigate the menu to Software Component Version and select Delete
This removes both the Software Component and the Software Component Version
Ensure that the Change List is empty
2. SLD
Double click on the Software Component and select the Remove button
3. Clear SLD Cache
You may want to go back into the Design:Integration Builder, navigate the menu to Environment and select Clear SLD Data Cache
cheers,
Naveen

How to move database objects from one user to another user

Could someone help how to move database objects from one user to another user
Thanks in advance

Thanks a lot for the reply.
Actually I wanted to know whether there is any command to change the owner ship of the table.
For ex table1 belongs to user1. can the owner of table1 to be changed to owner2.
directly using an oracle command. I knew that it can be done using import and export, since the table was 200 million thought the rename command would be faster instead of import and export.
Thanks Billy for letting me know that it is not possible using oracle query.

How to delete a object in ODS

I am facing a problem in deleting a ZOBJECT which was mistakenly added in two ODS.
When I try to delete the object, it says that -
cannot delete/move the locked info objects.
(Infact, this object is unlocked).
I opened the ODS from which it has to be deleted, I tried in Extras unlock objects. When I select this option it giving me a warning that data in the ODS will be lost.
This ZOBJECT has been moved to Prod. System in other ODS. Now I need to delete this object which is in ODS which is in development. This wrong ODS and object is not transported. I need to delete this only in DEV.
Could some body explain me how to delete the ZOBJECT from the ODS?
Thanks
Ravi

HI Ravi,
In general u vl face such error if u try to delete object from a ODS that has data already. So, in order to overcome this error try removing data from ODS and perform required action. You cannot remove objects from ODS without removing data from ODS.
I hope it helps you.
Regards,
Rajkandula

How to delete an object from a change master?

Similar Messages

Maybe you are looking for