How to delete and stop RRbackups?

T61/Vista
I do not require the assistance of Lenovo recovery. I am using other software to achieve a similar purpose. How can I delete the directory (and all files beneath) C:\RRbackups? I am totally blocked from even clicking on the folder.
Thanks,
Mark

Sure, it's just a matter of launching the R&R application itself.
Go to Start --> Programs --> ThinkVantage --> Rescue & Recovery
If it's at least ver 4.x, you'll see a simplified main interface with 1 button to backup and 1 to restore. There should be a small link on the bottom left to Click on to go to the Advanced menu.
On the Advanced window, you can click on "View all backups" to see the size of each backup. You can also click on "Set schedule and preferences" to schedule your backups and change the number of incrementals.
The first backup that would have been taken is referred to as the "base" backup. All the subsequent scheduled backups that get taken are known as "incrementals". If you're interested in more information, you can take a look at the R&R Deployment Guide which can be downloaded from the ThinkVantage Admin tools page: http://www.lenovo.com/thinkvantageadmin

Similar Messages

How to Delete and Reset a Lost Root Password on a System With a Mirrored ??

hi All,
we are experiencing problem,lost root password on Solaris 10 Sparc T5120, with mirror root,
and we found the solution from Metalink.oracle.com, has anyone have try this??
here list capture the file system :
Filesystem size used avail capacity Mounted on
*/dev/md/dsk/d10 2.0G 349M 1.6G 18% /*
*/dev/md/dsk/d40 9.8G 563M 9.2G 6% /usr*
*/dev/md/dsk/d30 9.8G 1.4G 8.4G 15% /var*
*/dev/md/dsk/d50 7.9G 310M 7.5G 4% /opt*
*/dev/md/dsk/d600 3.8G 4.3M 3.8G 1% /home*
*/dev/md/dsk/d602 471M 20M 404M 5% /app/controlm*
*/dev/md/dsk/d601 471M 251M 173M 60% /app/ctsa*
*/dev/md/dsk/d604 4.9G 1.1G 3.8G 23% /app/oramon*
*/dev/md/dsk/d603 20G 11G 8.2G 58% /app/oracle*
*/dev/md/dsk/d606 39G 10.0G 29G 26% /proj/iprdb01/orafra/iprod01p*
here the step :
Solstice DiskSuite[TM] Software: How to Delete and Reset a Lost Root Password on a System With a Mirrored Root Disk [ID 1010755.1]
Solution
Steps to Follow
How to delete and reset a lost root password on a system with a mirrored root disk.
1) Insert the Solaris[TM] Operating System CD-ROM into the CD-ROM drive.
2) Once the CD-ROM is in the drive, perform a stop-a. This brings the system down to the "ok" prompt.
3) From the "ok" prompt, perform a single-user boot from the Solaris OS CD-ROM.
ok boot cdrom -s4) At the "#" prompt, determine which disk is the system's boot disk (containing the root file system). There are several Oracle architectures and various configurations of systems when it concerns a boot disk. As a general rule, most boot disks are attached to controller 0 (c0). Usually, their SCSI target is
either 3 (t3) or 0 (t0). However, Oracle machines are very flexible, and the boot disk could be at a different location. If you are not sure which disk is your boot disk, perform the following steps to determine the location of the boot device:
a) # eeprom boot-device
The output might appear to be simple, such as "disk" or "disk1" or more complicated, such as a pathname "/iommu/sbus/espdma@4,8400000/...../sd@3,0:a".
b) Make note of the boot-device. If the boot-device is a pathname, it is beyond the scope of this information to provide the location of the customized boot disk. However, for most configurations,
finding the customized boot disk is an easy task. The "Format" command shows all available disks:
#format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
(enter its number): c) Enter d to exit format.
Now, you will have an idea what disks are on the system. Therefore, if the boot-device is "disk" and format shows "c0t0d0" (on some systems "c0t3d0") then that is the boot device. If boot-device
shows "disk1" and format shows "c0t1d0," then that is the boot device. If format shows multiple disks, then based on what the "eeprom boot-device" command shows, the system's boot disk would be:
boot-device format
disk c0t0d0 or c0t3d0 (machine dependent)
disk1 c1t0d0
disk2 c0t2d0
disk3 c0t3d0 or c0t0d0 (machine dependent)
and so on ....
5) Because the system was not brought down gracefully (no root password means having to use the Stop-a keystroke to "crash" the system), you need to run "fsck" to clean the root partition (slice). The fsckalso confirms that you selected the proper slice.
# fsck /dev/rdsk/c1t0d0s0
where the X and Y are determined by the previous procedure. It is also possible to have a root partition which is not on slice 0 (s0), but, again, that is not a standard configuration.
The output of "fsck" looks like this:
** /dev/rdsk/c1t0d0s0
** last mounted on /
** Phase 1 .....
The second line in the output of "fsck" ("** Last mounted on /") confirms that this is the correct root filesystem partition. Answer "y" to any questions fsck asks. There shouldn't be too many items
needing repair. If there are, there is a possibility of a corrupted root filesystem. After fsck is finished, mount the root partition:
# mount /dev/dsk/c1t0d0s0 /a
Again, X and Y are the same as for the fsck command.
For example:
# mount /dev/dsk/c1t0d0s0 /a
6) From the root prompt, set the proper TERM type command (such as vt100, dtterm, sun, and so on)
by entering this command:
# TERM=sun; export TERM
7) Use the VI text editor to edit the /etc/shadow file:
# vi /a/etc/shadow
8) The first line of the /etc/shadow file is the one you want to modify.
It looks like this:
root:c3.yAVmYodWsc:6445::::::
9) Delete every character between the first and second colons in the first line of the file. When you finish deleting the characters, the line should look like this:
root::6445::::::
10) Press the Escape key, then enter the following to save the file and exit vi:
:wq!
11) Use the VI text editor to edit the /etc/system file andremove the "rootdev" line shown below:
# vi /a/etc/system
*rootdev:/pseudo/md@0:0,0,blk
Don't comment out the "rootdev" line. Actually remove it.
12) In the /a/etc/vfstab file, replace the lines for the system filesystem meta-devices with their underlying partitions. For example, change lines from
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
to
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
ONLY change the lines for root (/) and the filesystems that were affected by the actions you took in step 1 of this procedure. All other metadevices may stay as is in this file.
13) Unmount root, check the root filesystem, and then stop the system:
# cd /
# umount /a
# fsck /dev/rdsk/c1t0d0s0
# stop-a
14) Boot to single-user mode:
ok boot -swTHIS STEP IS VERY IMPORTANT; YOU MUST BOOT TO SINGLE-USER MODE TO AVOID FILESYSTEM CORRUPTION.
If the system does not boot to single user mode, you might have made a mistake in the previous steps.
15) Because the root password was cleared in an earlier step, press Return when prompted for the the root password. Once you are in single-user mode, you must clear the metamirrors and all the sub-mirrors for the root filesystem. For example, if root (/) is d0, run the following command:
# metaclear -f -r d0
Running the metaclear command not only clears the metamirror but also clears the submirrors that are part of this mirror.
16) When the metamirror is cleared, continue the boot up to multiuser mode by either pressing CTRL-D or by entering the following:
# exit
Now everything should be as it was, except that the system partition is on the underlying partition and isn't mirrored. You will simply need to re-create the metadevices for the root mirror as you had originally.
many thanks

Hi,
Halt your machine.
Boot with fail-safe mode.
format and list out the disks. (You can get the root & mirror disk (c#t#d#) details from /etc/lvm/md.tab of your root or mirror disk. Earlier explorer output may help)
Mount the root disk and remove the password entry in /etc/shadow
umount it.
Mount the mirror disk and remove the password entry in /etc/shadow
umount it.
reboot the server.
Hope this helps!

How to start and stop the BI Services in Solaris 10

Hello All,
Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
Any help will be appreciated
Thank you
Ash
Edited by: 902739 on Jan 11, 2012 12:17 PM

Please help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name                                   Hostname
# Hope SAP ERP Prod DB Primary       gsgbbux860
# Hope SAP ERP Prod DB Standby      gsgbbux861
# Hope SAP ERP Prod Cluster              gsgbbux862
# Hope SAP ERP App 1                       gsgbbux864
# Hope SAP ERP App 2                       gsgbbux865
Thanks in advance
Zaheer

How to Start and Stop Processes?

How to Start and Stop Processes?
Im trying to create a program which allows me to Start and Stop (and Restart) GameServers. I will then expand on this so i can start and stop them through a web applet with build in useraccounts.
Currently the way we do this is to log into the server using a RemoteAssistance. Which is not very safe as the users have the abbility to do anything on the server and potentially corrupt it.
Below is my code for how i start the servers. But i dont know how i would stop the process.
                private void startServers()
               for(GameServer gs : servers)
                    int ID = Integer.parseInt(gs.getID());
                    if(isChecked(ID))
                         try
                              String cmd[] = gs.getStartString();
                              Runtime.getRuntime().exec(cmd);
                              int sleepPeriod = Integer.parseInt(sleepField.getText());
                              Thread.sleep(sleepPeriod*100);
                         catch(Exception e)
                         System.out.println(e);
               }//end of iterator
               JOptionPane.showMessageDialog(null,"All Selected Servers Have been started.","Servers Started",2);
     }//end of startserversAnyhelp would be great thanks.

Using the process class would give you a nicer API, but using destroy isn't a nice way to shutdown a process. Its like killing the process with your task manager. You should make a connection in some way with the game server and tell it to shutdown in stead (gracefull termination).

How to Start and Stop the SAP System

Hi,
I have installed "Sneak Preview"; Searched for start and stop scripts but there are more than one script which has named start.bat and stop.bat. Moreover, I searched the documents which comes with Sneak Preview but could find useful instruction there either.
Question: Could you please point me to the documentation where it explains the starting and stopping SAP, for Sneak Preview?
Thanks in advance
Jawad Kakar

Please help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name                                   Hostname
# Hope SAP ERP Prod DB Primary       gsgbbux860
# Hope SAP ERP Prod DB Standby      gsgbbux861
# Hope SAP ERP Prod Cluster              gsgbbux862
# Hope SAP ERP App 1                       gsgbbux864
# Hope SAP ERP App 2                       gsgbbux865
Thanks in advance
Zaheer

How to Starting and Stopping OC4J Server using Ant

How to Starting and Stopping OC4J Server using Ant
In the ant task definitions for ant-oracle-classes.jar (see antlib.xml) there are two tasks called
     name="restartServer" classname="oracle.ant.taskdefs.deploy.JSR88StartServer"
     name="shutdownServer" classname="oracle.ant.taskdefs.deploy.JSR88ShutdownServer"
I thought that these would shutdown and start the OC4J server. I guessed the parameters as – (Does anyone know where 50 ant targets are documented?)
<oracle:restartServer
userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
<oracle:shutdownServer
     userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
This, however does not start and stop the SOA suite. To do that I've hacked this solution together -
<path id="oc4j.console">
     <pathelement location="${oracle.home}/config"/>
     <pathelement location="${oracle.home}/jlib/startupconsole.jar"/>
     <pathelement location="${oracle.home}/opmn/lib/optic.jar"/>
     <pathelement location="${oracle.home}/lib/xmlparserv2.jar"/>
</path>
<target name="stop" description="stop oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="stop"/>
     </java>
</target>
<target name="start" description="restart oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="start"/>
     </java>
</target>
This sort of works – except when the SOA suite doesn't stop cleanly – and needs user interaction to press a Close button. This isn't very useful when doing a continous integration build and deploy.
So, does anyone have any suggestions or alternative methods to do this?
- frank

Actually if the server throws exceptions when it stops (which it always has since we applied patch 10.1.3.3) this technique will pause until a user responds to pop-up ... So a better way (I think) is -
<target name="start" description="start oc4j server" depends="init">
<java classname="oracle.appserver.startupconsole.view.Runner">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="start"/>
</java>
</target>
<target name="stop" description="stop oc4j server" depends="init">
<echo message="We expect OC4J *NOT* to stop cleanly, so we will timeout after 3 minutes ..."/>
<java classname="oracle.appserver.startupconsole.view.Runner" fork="true" timeout="180000">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="stop"/>
</java>
</target>
<target name="restart" description="restart oc4j server">
<antcall target="stop"/>

<waitfor maxwait="2" maxwaitunit="minute">
<not><http url="http://${oc4j.http.hostname}:${oc4j.http.port}"/></not>
</waitfor>
<antcall target="start"/>
</target>

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

How to start and stop VIO cluster

How to start and stop VIO cluster
How to extend/modify the VIO cluster once created from webclient
Thanks,
Venkat

VIO 1.0 GA version has the UI to start/stop the cluster

How to delete and recreate Photoshop and Illustrator preferences

Can anyone tell me how to delete and recreate my Photoshop and my Illustrator's preferences?

Photoshop Help | Preferences

How to delete and rename LSMW projects...

Hello Experts,
I can't seem to find a way on how to delete and rename my LSMW projects.I dont see any options on how
to rename it.
Thank you guys and take care!

On the LSMW transaction start screen. Goto->Administration. Here you can select your project etc. and rename/delete/copy.

How to delete and edit particular line in a file and save it in same file ?

Hi,
I want to delete and edit text at particular line in a file.
But edit and delete should reflect in same file.
I have done googling for this but it results with using another file, that i dont want as i need to save changes in same file.
How can i do this?
Thanks in advance
Edited by: vj_victor on May 24, 2010 3:33 PM

I just want to make sure, this is the only way to do what i mentioned ? or it could be done another way !a) write the data to a new file
b) delete the old file
c) write the data to a newer file
d) delete the new file
e) rename the newer file to the old file name.
For a hint about still more ways to do this, search for the complete lyrics of One man went to mow, Went to mow a meadow...
db

Cisco Works - need to re-use a 3560, how to delete and re-add in Cisco Works

Hello. I did not see a cisco works section on the forum, forgive me if it's there and I missed it. I have removed a 3560 switch from one location and am going to rename it (same IP though) and deply it in a different department. We have cisco works sending critical and informational alerts as well as backup the configs on Sunday mornings. I think I was able to get it to stop sending alerts when I unplugged and unhooked the switch. I want to give the switch a new host name and re-deploy it. I assume it will be easier to delete and then re-add the switch to cisco works. Is the a document where I can follow steps to remove it from cisco works? I have the documentation, but it is hard to read and they don't really have an area that specifically says "remove a switch from cisco works", and I don't want to break everything for the other 55 switches that cisco works does do the alerts and backups for. I know cisco works is full of different modules, so I was wondering if there was a document or some type of help I could get for doing this. Any help would be greatly appreciated. Thanks. Mike Baker

Hi,
It sounds like a tutorial may be what you are looking for. Here is one based on LMS 3.1.
https://learningnetwork.cisco.com/docs/DOC-4031
To remove a device from DCR (Device & Credential Repository) navigate to Common Services > Device and Credentials > Device Management.
Thanks,
Nick

How to start and stop a progress-bar thread before/after the main thread

hi. I would appreciate any kind of help on my request.
I have this as my main() function
     public static void main(String[] args)
          SwingUtilities.invokeLater(new Runnable(){
               public void run(){
                    Options op = new Options();
                    OdessaClient oc = new OdessaClient(op);
                    oc.setVisible(true);
     }Whenever I try to start a simple JFrame with an indeterminate progress bar on it just before the main function and stop it somewhere after I get a StackOverFlow error
Exception in thread "AWT-EventQueue-0" java.lang.StackOverflowError
     at java.awt.Component.show(Component.java:1302)
     at java.awt.Component.setVisible(Component.java:1253)
     at com.client.CylonBar.hide(CylonBar.java:25)
     at java.awt.Component.show(Component.java:1302)
     at java.awt.Component.setVisible(Component.java:1253)
...and so on...How must I implement something like it?

Not precisely that way, but just off the top of my head, you would have to have a handle to the proccess (server) in the first window, then have a monitor program that allows you take this handle and end it. I would make this monitor program be the gateway to starting and stopping your server. To run a .bat file you can use runtime.exec().

How to start and stop a queue in ECC??

Dear all,
I have a problem regarding the Start and Stop of queues in ECC. Whenever I change the data in ECC (for example extension of a material to a new distribution chain, or Creating a quotation which has to trigger a corresponding quotation in CRM), replication is not happening to CRM. On analysis of the outbound queue in ECC, we are finding corresponding ernties for the material / quotation. On dbl cliking an entry, we are able to see the queue in STOP status. When tried to reset status and activate, system throws a message saying GENERIC STOP SET.
1) How to overcome this problem?
2) How to START or STOP a queue (for Eg: R3AD*) in ECC?
Please respond.
Every point you share will fetch so many points / lot many smiles to you (No surprises.. I am plagerizing the famous quote on SDN)
Regards,
Rajesh

Dear Chandra,
Thanks for ur quick response. I have awarded you a sixer. Ofcourse, the content is much richer than that. But if i award 10, thread has to be closed. So that stopped me from awarding that
Dear all,
Can someone else share their views?
Regards,
Rajesh

How to start and stop video acquisition in a state machine

hello,
I'm a neuroscience student and here's what I'm trying to do: 1) trigger a GigE camera (200fps), 2) start video acquisition, 3) trigger a light that will stay on for x miliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve simultaneously and 5) stop the video acquisition 1second after 4). For that, my VI is a state machine, with a state for each trigger (ex, 1 state for trigger camera, 1 state for trigger light, ect) plus a state to "stop" and a state "time to wait". Everything was working except the video acquisition - the program would trigger the camera but only acquire one frame, because it wasn't running in a while loop and this is my first question: for a video acquisition is it always necessary to have a while loop?
I assumed the answer was yes, so I built a "consumer" loop for the camera. Putting a queue in the state "trigger camera" in the producer loop, I was then able to start the video acquisition but now the problem is to stop it in the right time. I have another queue in the "stop" state in the producer loop, but it isn't able to start the "stop" state in the consumer loop, I think that may be because the consumer loop gets "stuck" in the while loop.
I hope you can help me, the VI is attached. Thanks!
Solved!
Go to Solution.
Attachments:
trigger_cam.jpg ‏345 KB
trigger_stop.jpg ‏354 KB
Conditioning MS vi 2010.zip ‏68 KB

Hi Gak,
Thanks for the suggestions. I still didn't got it to work though. I moved the stop command to inside the while loop like you said but it didn't work. The problem seems to be in the communication between the producer/consumer loops. When I run the VI in highlight, the queue message "trigger camera" leaves the producer and arrives at the consumer loop in the appropriate time, starting the "trigger camera" state of the case structure. However, the message "stop" doesn't seem to be sent by the producer loop, so the consumer doesn't receive a signal to start the "stop" state of the case structure. Can you think of anything I should change in the producer loop so that the second state (stop) is added to the queue?
About the functional global, I read about it, it seems that either that or a local variable could work, but I don't quite know how to implement it in my state machine, since the stop of the first while loop isn't activated in the "stop" state but in the "shutdown" state. It works more or less like this: after 10 loops of triggering and stopping the camera, light and valve (so after acquiring 10 movies), it goes for shutdown. Can you show me what you had in mind with the functional variable?
Attachments:
Untitled.jpg ‏286 KB

How to delete and stop RRbackups?

Similar Messages

Maybe you are looking for