How to delete conditions in PO

Hi Expert,
How can i delete conditions like ZCSC,ZCSL and ZCSD in PO? I don't want to have those conditions in my PO. Please guide.
Thanks.

Hi,
you probably won't be able to delete the condition
types you mentioned from the PO conditions, since these are part of the calculation
schema assigned to the PO. When price determination is run, the system
finds the schema assigned, and goes through each step number to see
if a valid condition record exists for the condition type. If
you have a condition record somewhere for these condition types. After
pricing determines the value, you can then go ahead and change them
manually to whatever you want, including zero and save the PO on the condition screen in ME22N.
If you don't want anything determined for these condition types, you can
set the condition records themself for deletion. From the condition
screen in the PO, you can select the condition type, and click the
button display condition record. That should help you to find it. You
can also use the analysis button. This will show you the schema, and
results for all condition types in the schema. You can display the
condition record from here as well. Then just go to where
it's maintained and set for deletion.
Deleting them from the schema itself is maybe not a good idea. This could lead
to inconsistencies when you still have open PO items to which this
schema is assigned.
Regards,
Edit

Similar Messages

How to DELETE condition tables in IDES

Hi Experts,
while practicing in IDES I have created tables in the range 501-999. I have no tables to create now. Can any one tell me how to delete the existing condition table. when I tried deleting its giving error: TABLE 911 IS REFERENCED FOR ACCESS SEQUENCE.
Thank you
SAHER

Dear Saher,
The best solution is to do as below.
TCODE: SE11
Database Table : T682I --> choose DISPLAY
CTRLSHIFTF10
Input 911 in KOTABNR
Execute / F8
you will get the access sequences which use the condition table 911.
go to v/07 of the access sequence obtained from the previous operation and
delete the access which use condition table 911.
Then you will be able to DELETE 911 condition table of your own.
Please check and revert back.
Thanks & Regards,
Hegal Charles

HOW TO DELETE A CONDITION TABLE??

HI
DOES ANYONE KNOWS HOW TO DELETE CONDITION TABLE?
THANKS

Vikas,
Do you want to delete a pricing condition table?
T-Code: V/04
In Change Mode, enter the condition table number and press enter. You can delete the condition table using menu Condition>Delete
If this condition table is part of a access sequence then you have to remove the table from the access sequence and then delete the table using the steps above.
Chandan

Delete condition record??

how to delete condition record from VK11. can i have t code plz.

Hi,
Just to add,
There are two possible procedures for deleting conditions. There is either immediate deletion or a deletion flag for archiving at a later date. You enter the type of deletion that should be proposed during condition maintenance into Customizing for a condition type, . When deleting immediately, a dialog box can be created which indicates immediate deletion but offers a deletion flag as an alternative.
<b>Deletion Flag</b>
You can mark condition records for deletion. These are then no longer taken into consideration during automatic pricing. However they remain as condition records in the system until the next archiving update. This means you can reset a deletion and reactivate a condition record.
<b>Physical Deletion</b>
If you use physical deletion, the condition record disappears immediately. It is no longer available during condition record maintenance or pricing. This deletion cannot be reset once it has been carried out. You have to recreate the condition record if you need it again. To be more exact, the reference to the condition record for pricing and condition record maintenance is deleted completely with physical deletion. The actual condition record must be kept for old documents.
<b>Recommendation:</b>
SAP recommends the physical deletion procedure. The deletion flag improves upwards compatibility in the system.
A pricing error can occur when using hierarchical accesses in combination with the deletion indicator (See the hierarchical access documentation in the SAP library).
The deletion flag used to be used as a replacement for a missing release procedure. This is no longer necessary, as there is now a separate release procedure available (see the release procedure in the SAP library).
Physical deletion can be included using the change documents for example deletions in a specific period (Report RV16ACHD).
Hope this helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

How to delete the delta queue in the ECC

Hi everyone!
After I tryed to save a new Infopackage and I have the error :
(Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
Message no. RSM1071
Diagnosis
Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
As the error says - Deltas have already been loaded for the init. selection.
Can you please give me some links/guids which describes how to delete the delta queue in the source system, and restart the delta process.
thank you, Ron

Hi,
Assuming as you need to the reinit for same selections.
in such case you need to delete old init.
how to delete init:
Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
Later you can trigger your init info pack with selections.
Thanks

How to delete a particular row in ALV table

Hi,
How to delete a particular row in ALV table based on some condition(by checking value for one of the columns in a row)
Thanks
Bala Duvvuri

Hello Bala,
Can you please be a bit more clear as to how you intend to delete the rows from your ALV? By the way deleting rows from an ALV is no different from deleting rows from a normal table. Suppose you have enabled selection property in ALV & then select multiple rows and click up on a button to delete the rows then below would be the coding: (Also keep in mind that you would have to maintain the Selection property of the context node that you are binding to your ALV to 0..n)
data : lr_table_settings TYPE REF TO if_salv_wd_table_settings,
             lr_config          TYPE REF TO cl_salv_wd_config_table.
lr_table_settings ?= lr_config.
** Setting the ALV selection to multiple selection with no lead selection
lr_table_settings->set_selection_mode( value = cl_wd_table=>e_selection_mode-multi_no_lead ).
Next delete the selected rows in the action triggered by the button:
METHOD onactiondelete_rows .
DATA: wd_node TYPE REF TO if_wd_context_node,
         lt_node1 TYPE ig_componentcontroller=>elements_node,
         wa_temp TYPE REF TO if_wd_context_element,
         lt_temp TYPE wdr_context_element_set,
         row_number TYPE i VALUE 0.
wd_node = wd_context->get_child_node( name = 'NODE' ).
CALL METHOD wd_node->get_selected_elements
    RECEIVING
      set = lt_temp.
LOOP AT lt_temp INTO wa_temp.
    wd_node->remove_element( EXPORTING element = wa_temp ).
ENDLOOP.
CALL METHOD wd_node->get_static_attributes_table
    EXPORTING
      from = 1
      to    = 2147483647
    IMPORTING
      table = lt_node1.
wd_node->bind_table( new_items = lt_node1 ).
ENDMETHOD.
If in case this isn't your requirement please do let me know so that I can try come up with another analysis.
Regards,
Uday

How To Delete The Extra Page In Smartform Output

Hi Friends,
I am working wih Smarform..which displays P.O Details (Header and Item ) .
Header Details in Template and Item Details in Table..
I am trying to print 10 P.O ..for every P.O i kept New page command.
So..finally i have to get 10 pages in output...instead i am getting 11 pages...
How to delete the extra page ? Y i am getting this..
please give helpful answers...
Points will be given after get the answer.
Thanks,
Laxmi

Hi,
as someone else said. put the newpage command at the start.
However with a condition that that it not happens at the first page.
or
Determine how many P.O.
use a counter.
If this counter is equal to number of P.O, then no newpage command.
success.
Gr., Frank

How to delete the values from TKOMV at runtime after creating PO

Hi,
How to delete the values from TKOMV at runtime after creating PO from IDOC. I am creating PO through IDOC, subsequently need to create Sales order and again need to create 2nd PO with reference of Purchase Requestion(created with sales order). At the time creation of 2nd PO the Header conditions are appearing twice and net price value is appearing wrong.
Thanks in advance.

Hi Padma
Can you do this activity once the company code is in to production. I guess you can not do this activity, if the company code is already in to live. Setting or resetting of the recon accounts will hinder the previous actitivity. Infact resetting of the company code is also not a good option.
Any how, thanks for the inputs. Please let me know whether i can do this activity only at the subledger level which will not impact other modules. The one solution i can figured out is , reverse all the transactions for the corresponding asset in the year of takeover and pass the entries again in the same year correctly which will have effect in Subledger and also in general ledger. But the business people will not allow this, since for a big client it will require lot of authorizations and approvals. Infact the vendor also, is cleared. So we have to reverse the cleared documents as well which is again a task and require approvals as well.
Thanks and regards
Seshu.

How to delete records from dynamic internal table.

Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
                  TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
          lw_line1 TYPE REF TO data.
    CREATE DATA Lw_line    TYPE (lw_TABNAM).
    ASSIGN      Lw_line->* TO   <WA_tbl>.
    CREATE DATA LW_LINE    TYPE STANDARD TABLE OF (Lw_tabnam)
                           WITH NON-UNIQUE DEFAULT KEY.
    ASSIGN      Lw_line->* TO <TBL>.
    SELECT * FROM (Lw_tabnam)
             INTO CORRESPONDING FIELDS OF TABLE <TBL>
             WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
     for ex : ( here lc_fieldname is KUNNR)
      loop at t_kunnr.
          lw_tabix = sy-tabix.
        Read table <tbl>
                with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
        If sy-subrc = 0.
        *Delete
        delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
        Endif.
     Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.

Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
       LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
               <WA>    TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max

Deletion condition types from purchase order

Hello,
I've got the following situation:
1) PO had been created for one material with S price and there was three conditions, that to reflect planned freight costs.
2) There GR have been done.
Postings:
Stock 10 Dt
Price difference 6 Dt
GR/IR     -10 Kt
GR/IR     -2 Kt - Condition 1
GR/IR     -3 Kt - Condition 2
GR/IR     -1 Kt - Condition 3
3) Cancellation of GR - 102 mvmt type:
Stock -10 Kt
Price difference -6 Kt
GR/IR     10 Dt
There were no reverse postings for planned conditions !!!!
During the analysis of this PO, after all of this postings - i've found out that there are three conditions, but with zero values !!!
As i know it is impossible to delete conditions from PO after postings.
We didn't implement any ABAP
Do you have ideas about this accident?
Thank you in advance.

I can't understand you: "could you corelate the changes or are they in line wth if the condtion value was changed?"
Where i need to correlate it? I can't see it CDPOS - i can see only the changes of the following fields:
EKPO
BRTWR
EKPO
EFFWR
EKPO
NETPR
EKPO
NETWR
And the values there are not correlated with the values of condtions in EKBZ.
I suppose that some condtions were in the PO after GR, but there then they were deleted (but how???!!!) and after this was cancellation of GR - we've got only reverse entires - it sounds like nonsence.
But i have no any idea.

How to delete modified version datasource

I have a datasource in M version and A version. I am getting datasource activation error in BI 7.0
Please let me know how to delete Modified version.
Thanks
Liza

I removed a field from LO datasource 2LIS_11_VAITM , activated, tested successfully in R/3.
I replicated the datasource successfully in BW. But when activate the data source I am getting short dump ST22 ,the error message is " The ASSERT condition was violated". I am BI 7.0.
BW side in datasouece I found a not equal to sign ( which means M version is not equal to A version) and datasource is inactive.
ST22 -
Short text
    The ASSERT condition was violated.
Error analysis
    The following checkpoint group was used: "No checkpoint group specified"
    If in the ASSERT statement the addition FIELDS was used, you can find
    the content of the first 8 specified fields in the following overview:
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
Thanks
Liza

Delete Condition Type Depending on Item category Va01

HI all,
I wan to delete condition record depending on item category. I have a good link from sap.This link explains how to hide the condition but i want the delete the condition. was badly struck here.
http://wiki.sdn.sap.com/wiki/display/ABAP/ManipulatingPricingconditionsdisplayinSalesdocumentwithUserExit-LV69AFZZ
Regards,
madhu
Edited by: madhurao123 on Mar 24, 2011 2:19 PM

Hi,
We had a similar requirement once, and towards the end we realised that deleteing rather than hiding it was a bad idea.
Think beyond the scope, that if a future sales order created with reference needs this condition record; manual entry will again be dependent on your pricing procedure and is a mess.
But if you do want to delete it; go into debugging and decide which user exit you would want to use and delete that line of the condition record from XKOMV table for that Sales Order

Is their any function module for deleting condition record i am trying

Hi Experts,
Is their any function module for deleting condition record i am trying this way.......
DATA: TABLE (4) TYPE C.
DATA: KNUM LIKE KONH-KNUMH
DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
DATA: T681_STR LIKE T681.
DATA: LV_NUM TYPE I.
GET PARAMETERS
PARAMETERS: TABNO LIKE T681-KOTABNR.
PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
REFRESH INT_KNUMH.
Select single * from T681 into T681_STR
where kvewe = K_VEWE AND
KOTABNR = TABNO.
IF SY-SUBRC NE 0.
WRITE: / 'No entry in T681 for number ', TABNO.
WRITE: / 'Check whether corresponding condition table exists.'.
EXIT.
ENDIF.
TABLE = T681_STR-KOTAB.
SELECT KNUMH FROM (TABLE) INTO KNUM.
SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
IF SY-SUBRC NE 0.
INT_KNUMH-KNUMH = KNUM.
COLLECT INT_KNUMH.
ENDIF.
ENDSELECT.
DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
IF LV_NUM EQ 0.
WRITE: / 'No inconsistent entries found.'.
WRITE: / 'Each record in the condition table has a corresponding.'.
WRITE: / 'entry in the KONH table.'.
EXIT.
ENDIF.
LOOP AT INT_KNUMH.
IF TESTMODE IS INITIAL.
DELETE FROM (TABLE) WHERE
KNUMH = INT_KNUMH-KNUMH.
IF SY-SUBRC = 0.
WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
ELSE.
WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
WRITE: INT_KNUMH-KNUMH(10).
ENDIF.
ELSE.
WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
ENDIF.
ENDLOOP.
is their any Standerd Function module for comparing tables if the condition record not exist in it has to exit if it is their then compare those two tables if not exist in one table also that has to be delete the condition record
Please let me know .....

Hi,
You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
Regards
Kiran Sure

How to delete header text, I know create_text, read_text?

Hi,
I know READ_TEXT and CREATE_TEXT FMs.
Now, am working with iodc_input_orders.
In my scenario....i know that, there is header text is populated.
if the slaes org = 1234, then i need to delete/remove this header text. ( i can not put the below IF condition " IF XVBAK-VKORG = '1234'........then delete ENDIF"
let me know that, How to delete the header text, i mean is there any FM?
thanq

thanq
i know the text segments(DXE1EDKT2, E1EDKT2) r available in exit zxvedu11.......but, for some reason i can not use it!!
yes, already i hv seen the exits of zxvedu04, zxvedu05 here the text segments r not available!!
so, let me know that, in which exit these text segments r available?
thanq

How to delete conditions in PO

Similar Messages

Maybe you are looking for