How to delete Control Recipe

Hi ,
Can Control Recipe can be deleted eventhough Incomplete.
In our scenario sometimes control recipe is auto generate at the time of process order release.So some times due to circumstances order can not proceed further in this case that generated control recipe creates problem to make order TECO or delete.

Dhaval,
The standard practice is to manually trigger a Process message to the order, to have the status CRFI - Control recipe finished.
Transaction CO57, to trigger manually a process message with message Category PI_CRST for the process order and Control reciepe combination.
Use Transaction CO54 to send the Message to the process order.
Regards,
Prasobh

Similar Messages

How to delete "no recipent no sender" messages

Help! Recently, I began to get messages in my Inbox with no content marked "no recipient, no sender" with no way to delete or move them. Sometimes going back to my mailboxes and the returning to the Inbox would get rid of them but not always. Now, I have the same type of message in my Sent mailbox...around twenty of them! Does anyone know what the glitch is that is creating these weird messages and, more importantly, how to delete them?
Thanks in advance!

There is some help on this page http://appletoolbox.com/2010/08/mysterious-no-subject-no-sender-mail-messages/ , but as I havn't had the problem I can't say for sure whether any of them work

Configuring RFC destination for control recipe

Hi,
There was a very good document in SDN which explains in detail how an external control recipe destination has to be configured with RFC destinations etc. written by somebody from IBM.
I cant find the document in the forum now.
Can any body please help me on this?
Thanks in advance.

Dear,
Please check these links,
[RFC destination |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c]
[Link2|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246]
[LINK3|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208c4788-7f02-2a10-da80-bbaf7a202780]
Regards,
R.Brahmankar

Deleting control points for volume curves

I might be a little thick today, but for the life of me I can't figure out how to delete control points on my volume curves and pan curves. Any help?
TIA
iMac Intel Core Duo Mac OS X (10.4.6)

click on the dots, they increase in size, and hit delete. Or you can rubberband them all by dragging an area over all of the one you want gone and then hit delete.
X

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to delete select data in the table control

this problem makes me headache.
I am new to labview, when a table shows some data. many rows and column. how can delete on row which I selected. the other rows are remain no change.
I really need help.thanks in advance. It is better to attach the program.my labview is 2009
Solved!
Go to Solution.

Hi,
You can do it with a table control as well. Check out the attached VI. To delete a row, Run the VI, just right click the row and click "Delete Row". To get back the default values, click reinitialize.
Reards,
NitZ
(Give Kudos to Good Answers, Mark it as a Solution if your problem is Solved)
Attachments:
Untitled 3.vi ‏8 KB

How to delete a column from the table control in module pool?

Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar N

hi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control

How to delete columns in table control

hi
1) I have creted a table control with five columns
now i want to delted the tow of the five coluent pls let me know how to delete it
1) also i am useing a module pool programming (code if needed i will paste)
in that the requirment is to select data from a ztable and aloow user to enter new ship to data only whne the corresponding records exists in kna1 table
and to populate the name1 value automatically from table kna1 whne user enters ship to number
pls suggest
regards
Arora

Hello,
Requirement 1
i believe you need to delete a row from the control table based on the user input...
if thats the case then definitely in the control table the multiple line selection will be activated .
in PAI of the control table screen...
if user has clicked delete.
loop at control table records..
if the selection code for the line is 'X'.
Delete from the internal table.
endif.
endloop.
endif.
Requirement 2..
i will give an outline on the checks
a)first let the user enter the data...in the PAI of the screen...write the code to do the checking....if your requirement is not satisfied provide a warning/error message or delete the record and give a message stating the reason for deletion...
in PAI.
for a control table...
loop at the table records
select from table and check if user record is O.K
if not delete the record and give message
endif.
endloop.
b)similarly inside the PBO write code to fetch the name1 from Kna1 table for the ship to number if that ship to number is not empty
in PBO of that screen
if ship_to is not initial.
select text for ship_to number to the display field
else.
clear the display field
endif.
reward if the suggestions were useful
Regards
Byju

How to delete a management agent from grid control completely?

I have installed oem grid control 10.2.0.4.0 on single host(oemlinux.oracle.com), and I removed agent10g, and reinstall a new management agent into a new location, but when I wanted to add a weblogic server to monitor, I got error as below:
More than one Enterprise Manager Agent was found for the host.oemlinux.oracle.com
I found there were 2 agents in em console, how to delete the old agent from em console,anybody can help me?

Click on the All targets tab, delete the agent.
Then confirm that the delete is in fact happening.
Click Setup, Management & Services Repository tab.
Deleted Targets link.
Time Deleted Completed must have a date in there...
If all that fails - do a quick search - I posted the sql you can run against the repository to wipe it clean of an agent :-)
Not too that if you are removing the O/S software - you need to use the runinstaller to remove the Oracle Home from the inventory.
If you don't do this - future auto installs using the agentDownload script of the agent will fail.
.Daryl

How to add new signature in Control Recipe

Hi Friends
I am trying to add new signature/user id in control recipe. But I did not find any option. Can anybody guide me as how to add. Pls send me step by step procedure.
Thanks

Hi,
The list of cost centers in which the activity type is planned is given in KL02 under planning data. In order to add a new cost center to this, you need to enter the activity type in transaction KP26 for a particular year.
Goto transaction KP26
Give version - 0
from period 1 to 12
year - 2011
cost center - mention the cost center
Activity type - mention activity type
goto overview screen F5 and add the plan price for the activity in the cost center. This step will automatically add new row in the activity type control data.
Hope this helps.
Thanks,
Ram

How to delete archive log files from ASM through Grid Control

Hi
Anybody suggest me how to delete archive log files from ASM through Grid Control.
Thanks

It is important to specify both, the oracle version and os version when posting, so confusions can be avoided.
In this particular case, since you are referring to asm and grid control you could be talking about either 10gR1, 10gR2 or 11gR1; but I strongly suggest you to avoid us to be guessing. In either case, you sould go to the maintenance tab of the target database and program a scheduled 'delete noprompt obsolete;' procedure. This will purge the information stored at the Flash recovery area, which I assume you have declared inside the ASM.
~ Madrid
http://hrivera99.blogspot.com/

How can I implement recipe control concept in SAPME?

Dears,
How can I implement recipe control concept in SAPME?
For example,
We can config the standard temperature setting needs to be between 100~120 degree C for Operation OP1 and Material MA1
So, before user start the SFC of MA1 at OP1, system can display the config values(100~120) for user reference, then, user need to input the real temperature when process the SFC, if it's out of spec, system can warning. System will collect the input data for analysis in future.
Thank you.

Thank you for your information.
Since customer prefer to use a custom UI which can communicate with SAPME by web service.
So I can not use SAPME default data collection or work instruction user interface.
I'm considering by using data collection and work instruction config data to develop a web service in MII and poblish to custom UI in which it can display the spec data and reject user's input if out of spec.
Please feel free to inform me if any other good idea, thanks!

How to avoide the control recipe creation step and control recipe complete

Hi
in process order procedure has configured in our syayrm ...like
orde creation,release,control recipe created at time orede release, then order conformation ,order inal conformation, control recipe comlete , order TECH., ...Like ths our order process configured..
here we not useing any control recipe functions ... and control recipr complte ...so how to remove this step from order process...pls could any one guide inthis issue.
Rgards
HGVD

Dear HGVD,
Assuming there is only one order type(process order type) is used in both the manufacturing plants,then create plant specific
production scheduling profile in CORY,for the plant 2000,assign the prod.schd.profile with the default order type and
do not include the check box for generate control recipe and save the data,but in the same CORY,assign the same order
type,with including the check box for generate control recipe.
Check by this way and revert back.
Regards
Mangalraj.S

How to delete and add rows in a table control

Hi
how to delete rows and add new rows in a tbale control
Sathya

Hi,
In the PAI write this code
PROCESS AFTER INPUT.
LOOP AT itab.
ENDLOOP.
MODULE MODIFY_TC.
MODULE MODIFY_TC.
To add a row
DESCRIBE TABLE itab LINES tc_tab-lines.
tc_tab-lines = tc_tab-lines + 1.
To delete a row if check box is ticked
DELETE itab WHERE check = c_x.
To delete a row depending on tabix
DELETE itab index l_tabix.
ENDMODULE.
Make sure that you put a if condition in the above module inorder to ensure addition or deletion of a row.
Best regards,
Prashant

How to delete and refresh the contents of table control..

how to delete particular row in table control .consider we r having three rows i wish to delete the third row.while on debugging the third row gets deleted successfully.but that is displayed in table control.then how to refresh the table control...

hi,
try like this....
USER_COMMAND of PAI
MODULE user_command_9000 INPUT.
CASE ok_code.
    WHEN 'BACK' OR 'UP' OR 'CANCEL'.
      LEAVE PROGRAM.
    WHEN 'DEL'.
      GET CURSOR LINE lin_no.
      f1 = 1.
   ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
and in Module in which u fetching data in PBO, write like
MODULE get_data OUTPUT.
IF f1 <> 1.
    SELECT kunnr name1
    INTO CORRESPONDING FIELDS OF TABLE mytab
    FROM kna1.
ENDIF.
IF f1 = 1.
    DELETE mytab INDEX lin_no.
    FREE lin_no.
    FREE f1.
ENDIF.
ENDMODULE.                 " get_data OUTPUT
reward if useful...

How to delete Control Recipe

Similar Messages

Maybe you are looking for