How to delete cost/profit centers and groups

I am looking for a way to mass delete profit centers, cost centers, profit center groups and cost center groups. KS14 and 0ke2 works for centers but not groups. Are there any other t-codes or function modules?

Hi,
There is no mass transaction to delete the groups; you have to do it one by one. You can 'record' CATT case, if you have big quantity of them.
Regards,
Eli

Similar Messages

  • How to delete cost element name from group after deleting the cost element

    Hi,
    Please let me know how to delete the cost element number  from the Cost element group hierarchy.I have deleted cost element but still showing only the CE number---no valid master record.If I d not want this to be visible within hierarchy let me know what should I do.
    Thanks

    Hi
    Go to change cost element group select the cost element click on select tab (3rd Tab from Left) it will take u to new screen in that screen select remove tab (1st tab from left)
    Regards
    Sandesh

  • How to obtain profit centers and cost centers for a particular GL account

    Hi Gurus
    Can you please suggest me a table or a function module to obtain profit centers and cost centers for a particular GL account.
    Thanks in advance for help!
    Regards
    Ankit

    Hi There, I have a simillar problem as above, however I would like a list of all G/L Accounts with profit centres and cost centres as well. Is this possible? Reason being that I have many unassigned cost centres and need to link them to profit centres.
    Is there also a mass processing list to see which G/L accounts dont have primary elements assigned?
    Regards,
    Edited by: Luke Saloojee on Jul 29, 2008 8:12 AM

  • How to update cost condition VPRS and Updation from VPRS to new cond ZVPR

    Hi All,
    How to do and is there any way to update the VPRS cost condition whenever vendor sends confirmation of material and cost after purchase order.
    After receiving the confirmation form the vendor,the VPRS cost condition should get updated in the system automatically.
    We have one cost condition type ZVPR which is same and consists of same properties of VPRS. How to update this ZVPR condition from VPRS Condition.
    Thanks in advance....
    Regards....Venkat
    Edited by: venkat t on Feb 16, 2009 11:57 AM

    Hi venkat
    Check the link
    [How to update cost condition VPRS and Updating from VPRS to new cond ZVPR;
    NOTE : Dont post in many forums
    Regards
    Srinath

  • How to create a new user and group on command line?

    Hi,
    I am trying to install INN, the news server on OS X.4.8 (non-server), but it requires me to create a user and group, both called 'news'.
    I know this has something to do with using Netinfo to create them, but I am logged in remotely via ssh and I can't use Netinfo Manager.
    How do I create new users and groups via the command line.
    Thanks for any help.
    PowerMac G5 2x2.7GHz   Mac OS X (10.4.8)  

    I've put some shell scripts that do this here,
    and descriptions
    add_user
    addgroup

  • Tcode for running listing of profit centers and segments they roll up into?

    The instance is ECC 6.0.
    Can someone please tell is there a T-Code that I can use to run a listing of Profit Centers and what Segments they roll up into?

    Hi,
    Profit centres could be viewed via KE55 transaction.µ
    Regards,
    Eli

  • How can delete his backup safety and totally?

    My friends and I share a same time capsule ( 4th gen, 2TB), so if one day he leaves, how can delete his backup safety and totally?

    Thank you for your nice recommandation of this aritle.
    The reason I ask this question is becasue someome has a trouble when they want to delete the buckup directly to trash. They just can not clear the trash bin which make their Time Capsule capability still occupied by the trash file.
    And the aritle says we can delete the backup by Finder directly. Just confused.

  • How to delete ios 5.1 and install the older version

    how to delete ios 5.1 and install the older version????

    apple stopped signing 5.0.1 and 5.0 fw.
    but to answer your question, you can still download old firmwares and then press shift while clicking on the restore button in itunes, point it to the fw and there you (should) go.

  • How to delete sotware component,SWCV and all objects under SWCV

    Hi All,
    how to delete sotware component,SWCV and all objects under this SWCV. Since i have imported all the SWC, SWCV and all interface , mapping object. I want to delete all these imported objects and re import these objects again. Please let me know how to do that.
    Thanks in advance.
    Kalpana

    You will have to delete all the objects under the namespace (then activate the changes), then delete the namespace and then finally delete the SWCV !!
    More ref this latest thread on the same subject: how can i delete software component in the IR

  • How to Check the Profit Center - Sales Group - Sales District for a BP

    Hi,
    How to Check the Profit Center - Sales Group - Sales District for a Business Partner?
    I am not able to identify which Profit center - Sales Group- Sales District was assigned to a Business Partner. Please provide me some inputs to check this.
    thanks
    Yadayya

    Hi
    Pls check these tables for data or prepare a z report with abapers.
    GLPCA u2013 PCA line items
    VBKD u2013 sales district
    TVKGR u2013 Sales group
    BUT000 u2013 Business Partner
    Regards
    Sridhara Rao D

  • When Forwarding, how to delete ALL previous Senders and Addressees?

    When Forwarding, how to delete ALL previous Senders and Addressees?

    When you forward an email, it will be sent to any previous addressees, only whomever you choose to forward it to. If you are referring to text in the email body that includes previous address information, simply edit it before sending.

  • How to delete TMS log file and and request log no.

    Dear experts,
    How to delete TMS log file and and request log no...My TMS log is not deleted since 2007. Please advice
    Thnks

    You can delete them from OS level. You can delete safely the following files:
    /usr/sap/trans/log/SAP*.<SID>
    Is this you were looking for?
    Regards,
    Faisal

  • How to delete iCloud email address and not iCloud service

    how to delete iCloud email address and not iCloud service.
    It is very anoying that I can't cancel icloud email address. Can someone help me?

    You can't delete either the account or the email address. If you are getting messages to it you don't want to see, go to http://icloud.com and to the Mail page: click on the cogwheel icon at bottom left and choose 'Rules'. Then set up a Rule to move all messages to your address to the Trash.

  • How do we get register code and group ?

    ji,
    how do we get register code and group based on device category?

    Use the below FM to fetch the equipment number
    ISU_DET_DEVICE_FROM_DEVLOC                                           
    X_DEVLOC                =        device location  
    X_KEYDATE             =       sy-datum
    Then call the below function to get euipment details
    ISU_DB_EZWG_SELECT_METER   
    X_EQUNR        =                equnr 
    X_AB               =            sy-datum
    Alternately
    Pass device location in table Egerh & fetch the equipment and register group. Then pass equnr in table ETDZ to fetch register code.
    Edited by: vikrant guptarya on Jul 20, 2011 2:46 AM

  • Usage of Cost Centers, Profit Centers and Internal Orders

    Hello everyone,
    i have perhaps for some of you a simple question but it bothers me alot.
    Imagine we are using Cost centers and Internal Orders. For them we create statistical key figures using transaction KB31N.
    Now we are installing SAP BI and want to create a report which would be generated acording to cost centers but with statistical key figures.
    The question would be how to make a connection between cost centers orders and those stat.key.figs?
    In our case the economists say that we are using this kind of scenario:
    Dist.chanel ->
    Sender: Cost center, Cost element
    Receiver: Int.Order
    and Stat key fig.
    This is the only place where we have a connection between thos objects. Is there other way how to connect them. perhaps using profit centers?
    If somebody didnt understand it, maybe ill try to explain it a bit better
    Reagards
    Laurynas Prikockis

    Hi Laurynas,
    Pls try to understand the concept as explained hereunder...
    Cost Element:
    Primary Cost Element : Replication of GL to bring costs into CO module when they are posted in FI 
                                       module
    Secondary Cost Elements: Carriers of costs between two Cost Objects (when we want to transfer the
                                            cost from Cost Centers to Internal Orders, vice versa and more, we create
                                            Secondary Cost Elements to carry the costs and transfer them to the 
                                            reciever objects from sender objects)
    Cost Center: It is a Cost Object, maintained on long-term basis, where we can capture the costs (Ex:
                        Marketing Cost Center)
    Internal Order: It is also a Cost Object, maintained on shor-term basis, where we can capture the costs
                         (Ex: Internal Order for Special Marketing Campaign). Ultimately, whatever the costs
                          posted to this Internal Order, will get settled to Marketing Cost Center.
    Staitistical Key Figure: It is used as a basis for allocation of certain expenses (Simple example would
                                      be, Total rent paid for office is $100000 per month. This cost has to go to
                                      different Cost Centers like Finance and Accounts, Marketing, Purchase Dept
                                      etc on the basis of "Area Occupied". So, We will define "Area Occupied" as a 
                                      Statistical Key Figure in our system.
                                     Now, when the Rent amount is posted in FI, it wil reach a Virtual Cost Center
                                     (An "Allocation Cost Center" with name "Rent" to be created under your
                                     Controlling Area) "Rent". From there, it has to reach the other Cost Centers (lie
                                     F&A etc as explained above) on the basis of Area Occupied (SKF Created
                                     for "area occupied")
    For this, you need enter the Area Occupied values (Ex:Sq Ft) in KB31N and you need to create an Allocation Cycle (Distribution / Assessment) where in you will select "Area Occupied" (SKF) as your Receiver Tracing Factor.
    I hope I am clear, don't hesitate to revert back for more explanation...
    Srikanth Munnaluri
    Edited by: Srikanth Munnaluri on Mar 3, 2009 7:26 PM

Maybe you are looking for

  • How Do I Set Reader 9 to be the Default Reader Over Old Acrobat?

    Since a crash from an unrecoverable virus, I formatted my HDD and loaded Office, etc. I downloaded Reader 9 and installed it, then reloaded my old Acrobat 6. When I try to launch a pdf file from the net, I get the statement, "The Adobe Acrobat/Reader

  • Reverse back to Tiger 10.4.x

    What's the best way to downgrade from Leopard back to 10.4.x? Since upgrading to Leopard I can no longer print. Others have encountered similar problems (check the printing forums). Anyway I was think of going back to 10.4 until HP or Apple can put t

  • Error in upgrading SharePoint Server 2013 with SP1 : "Task upgradebootstrap has failed with an unknown exception"

    I has successfully setup new Dev ENV of SarePoint server 2013 in VMware with 2 servers running om OS: win server 2008 R2 Ent SP1, AD + Central Admin Application Server. After that the configuration of SharePoint App and WorkFlow Manager completed as

  • IPlanet page

    HI I need a help on below scenario.PLZ guide me in this. Consider the scenario. You have iplanet webservers as a proxy .You have a Application servers at the end. You have 2 applications landing on weblogic.Webserver will serve the request to weblogi

  • Running 12.1.1 Upgrade driver - 6678700 Taking Long Time

    I started running this patch last Friday (02/11/11) on my VMWare front end.....it is still running. There were 124,000+ processes to run back then..now there are only 9234 remaining..but this one sql statement (olkstsch.sql) has been running for days