How to delete custom AET fields in CRM 7.0 Web UI

Hello gurus,
When I want to delete a custom AET field created by a mistake or for exercising purposes only, the UI Config tool markes it for deletion by changing a status to "Marked for Deletion" (a garbage bucket icon). My question is how to proceed further, i.e. eliminate the field completely. Do I need to manually delete the fields from the "Append" structures in the corresponding CRMS_xxxx Attribute structure, or do something like this?

Hi,
note: please do not delete the field manually from SAP GUI.
AET is able to create and delete custom field. The deletion process happens always in 2 steps.
1. you select which field you want to delete and press on delete icon. This will mark the field to be deleted.
    As long, you do not "Save and Generate". This deletion mark will not be persisted and the complete deletion of the field will not be executed. Having this mechanism, you are always able to cancel the deletion.
2. If you really want to delete the field. Press on "Save and Generate". "Save" will persist the deletion mark for the field.
    And "Generate" will do the "Delete" generation.
Please don't forget to remove the field from the UI configuration, when you configured the field in any UI Config before.
Regards,
Steve

Similar Messages

  • Is it possible to create custom partylist field in crm 2013

    Hi,
    I want to create custom partylist field in crm 2013. Please tell me how to create?

    Hello,
    That's not possible. The only way is from/to/cc e.t.c. attributes in custom activities.
    Dynamics CRM MVP/ Technical Evangelist at
    SlickData LLC
    My blog

  • How to DELETE a TARGET FIELD in a structure of LSMW for GL accts creation?

    Hi Experts,
    I developed a LSMW for GL accts creation.
    I used DIRECT INPUT method, below are the details,
    Prog. - RFBISA00
    Object- 0010
    Method - 0002
    Prog. type is "B" - Batch input.
    Issue: we r getting ther BSKX structure, its for GL Creation.
    But, here we r getting the field STYPE in this strucure, its making issue for us.(we dont hv any SOURCE STRUCURE for it, so, nothing is assigning for it?
    Pls. let me know that,
    How to DELETE this STYPE field in this LSMW under field mapping radio button?
    thanq
    Edited by: SAP ABAPer on Nov 18, 2008 3:34 PM

    Well Carlos, that would destroy the process, as STYPE is a necessary, technical field. Please care and read previous replies before suggesting potentially dangerous action.
    Thomas

  • Replication of custom z fields from CRM to ECC

    Hello,
    I have created custom fields in CRM - Order using EEWB.  Similarly I have created custom fields in ECC - VBAK.  I want to replicate these custom fields from CRM to ECC.  Somebody had suggested to use CRM_DATAEXCHG_BADI and method -  CRM_DATAEXCHG_AFTER_BAPI_FILL.  Can anybody give me a sample code of how to populate table - CT_BAPIPAREX within this method? 
    Process followed was -
    1. ECC - Extend VBAK with zfld1
    2. ECC - Extend BAPE_VBAK, BAPE_VBAKX with zfld1
    3. CRM - Add zdoc1 using EEWB
    4. CRM -  Extend BAPE_VBAK, BAPE_VBAKX with zfld1 (same as ECC?)
    5. CRM -  CRM_DATAEXCHG_BADI and method -  CRM_DATAEXCHG_AFTER_BAPI_FILL. - This is where I need to map zdoc1 of CRM to zfld1 of ECC.  And then populate CT_BAPIIPAREX.  This is where I am stuck. 
    Thanks!

    HI,
    If you have added field in EEWB chosen R/3 Adapter, then it will also enhance the Exchange structures and thus i guess CRM_DATAXCHange_badi shud contain in one of its changing parameters
    The following blogs gives a good idea in the similar lines.
    /people/vikash.krishna/blog/2009/07/21/exchange-ecc-customer-master-standard-field-with-the-crm-z-fields-ecc--crm
    /people/vikash.krishna/blog/2009/07/14/crm-70-how-to--4-adding-custom-fields-with-the-new-application-enhancement-tool-aet
    Revert if you need further help.
    -Satish

  • How to Delete the condition record in CRM

    HI,
    Can you please help me how to delete the condition record from condition table in CRM.
    Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
    I have also read the documention of the function module. How to use this FM for custom defined condition table.
    (this is the code given in Documentation)
    DATA-OBJECT_REPRESENTATION         = 'E'
    DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
    DATA-SEL_OPT-OBJECT_TASK                    = 'D'
    DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
    DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
    DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
    DATA-SEL_OPT-RANGE-R_VALUE_LOW  = 'PROD_1'
    Thanks
    Shankar

    Hi Shankar,
    I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
    But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
    Error in  lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
    code:
    ls_range-fieldname = 'PRODUCT_ID''.
    ls_range-R_SIGN = 'I'.
    ls_range-R_OPTION = 'EQ'.
    ls_range-R_VALUE_LOW = '123456'.
    APPEND ls_range TO lt_range.
    MOVE lt_range TO ls_entry-SEL_OPT-range.
    ls_data-SEL_OPT-object_task = 'D'.
    ls_data-SEL_OPT-ct_application = 'CRM'.
    ls_data-object_representation = 'E'.
    CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
      EXPORTING
        DATA          = ls_date
    IMPORTING
       RETURN        = lt_return
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      IMPORTING
        return = lt_ret.
    Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

  • Error while deleting an AET field

    Hi Experts,
    I tried deleting an unwanted field from AET tool which I had added earlier. I clicked the delete button and the field got set for deletion.
    Then I clicked on Save and Generate button on the top. The system got timed out. After I tried logging in again, I received a system dump that the append a structure doesn't exist.
    If anybody has faced similar kind of issue, please share your views.
    Thanks
    Vishal

    Hello,
    How did you resolve it ? I am also facing the same issue.
    Thanks and Regards,
    Nikhil Kulkarni

  • How to create customer specific fields within PC 10.0?

    Hello,
    for previous Process Controls versions 2.5 and 3.0 it was available two how-to guides to create customer specific fields. Nevertheless so far I couldn't find those versions for PC10.0.
    Does anyone have them? Or know if the 3.0 version is also valid for 10.0?
    Regards
    Andre Yuji

    Dear Johannes,
    We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
    as well as RE_RHGRENZ4 to  Set a new end date to the objects.
    At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
    Regards,
    Karina Atonaidan

  • How to populate customer specific field data in table /SAPAPO/ORDFLDS

    Dear Gurus,
    I have explained in detail about the problem we face. I guess persons who has implemented enhancement:  /SAPAPO/RRP_IO_COL in their system can help me out.
    Background:
    Purchase requisitions in APO is created by an idoc that comes from a legacy system using BAPI CALL FUNCTION 'BAPI_POSRVAPS_SAVEMULTI3'.
    Business Requirement:
    I have a business requirement where I need to populate an additional data 'Original delivery date' from the idoc during PR creation in Product view.
    Development:
    To achieve the above requirement, we are following the below procedure in our development system.
    1. We are using enhancement:  /SAPAPO/RRP_IO_COL, method: RRP_USEX_COLS_FILL_01 and RRP_USEX_COLS_GET_TEXT_01 to display an additional field 'Original delivery date' in /sapapo/rrp3 - elements view. This field is restricted to Purchase requisition (Order category: AG) only. We are planning to populate the additional data 'Original delivery date' in this customer specific field and store it in table: /SAPAPO/ORDFLDS at the time of PR creation.
    2. Table: /SAPAPO/ORDFLDS is appended with the 'customer specific field'.
    3. We couldnt find a document on how the data can be populated in table /SAPAPO/ORDFLDS.
    4. How to polulate the live cache data in the table  '/APAPO/ORDFLDS' ? ( i.e using connection parameter )?
    Appreciate if you can throw me some light on this.
    Thanks
    Vignesh M

    Hi Vignesh,
    ANy luck on this ? I am trying the almost same thing...and stuck at same point.
    Please let us know if you have any more information.

  • IS-RETAIL: How to update custom enhancement field using BAPI?

    Hi gurus,
    Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
    This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
    But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
    Thanks in advance!

    Hi DongHai,
    I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
    Rewards if useful
    Regards,
    Mark

  • How to populate custom table field value into standard DFF

    Hi Gurus
    I am newbie to the OAF
    I have a requirement to populate the custom table field value into standard DFF. we enabled the DFF in ReqDistDFFOnAcct(po_req_distributions_all). On the requisition tab as soon as i click on the checkout button, the custom field value has to be shown in the requisition distributions DFF field along with the standard Columns like charge account, percent, qty and when we click on the next button, it has to hit the base table ie., po_req_distributions_all.
    the standard columns data is showing the screen. how to acheive this requirement programatically
    There is a EO for the req distributions table. please help me how to achevie this requirement.
    Any help woud be greatly appreciated.
    Thank You!
    Krishna

    Thanks Aj. Finally i made some progress....but i am getting an error in the inst_top OPMN folder 10/10/08 15:37:14 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml. I cleared the cache, bounced the webserver. Could not able to understand what is this error
    Following is the code that i have written. I am not able to find out what is the error. please help me how to fix this error. there is no changes in the page and the value is not auto populating. the page is having the normal behaviour as the standard one.
    Thanks in Advance for your help...
    public class xxCheckoutDistsCO extends CheckoutDistsCO
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    String UnitId="";
    //First get the Application Module
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    OAViewObject vo = (OAViewObject)am.findViewObject("PoRequisitionLinesVO");
    String Reqlineid="";
    String Linenum="";
    String DeliverLoc="";
    if(vo.first() !=null)
    Reqlineid= vo.first().getAttribute("RequisitionLineId").toString();
    Linenum = vo.first().getAttribute("LineNum").toString();
    DeliverLoc = vo.first().getAttribute("DeliverToLocationId").toString();
    // if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
    // pageContext.writeDiagnostics("TEST >", Reqlineid,1);
    // pageContext.writeDiagnostics("TEST >", Linenum,2);
    // pageContext.writeDiagnostics("TEST >", DeliverLoc,3);
    UnitId=null;
    String Querry="select amli_icx_oaf_utils.get_blding_unit_id (?,?,?) from dual";
    try
    PreparedStatement ps=am.getOADBTransaction().getJdbcConnection().prepareStatement(Querry);
    ps.setInt(1,Integer.parseInt(Reqlineid));
    ps.setInt(2,Integer.parseInt(Linenum));
    ps.setInt(3,Integer.parseInt(DeliverLoc));
    ResultSet rs=ps.executeQuery();
    // ps.execute();
    // am.getOADBTransaction().commit();
    while (rs.next())
    System.out.println(" Query Results ");
    UnitId= rs.getString(1);
    System.out.println(" first > ");
    rs.close();
    ps.close();
    catch(SQLException a)
    System.out.println(" Error "+a);
    System.out.println(" Second > ");
    System.out.println(" Third > "); ----the program is executing upto here...it is not setting the value after this.
    OAViewObject povo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
    if(povo.getCurrentRow()!=null ) --------If i remove this condition i am getting the nullpointer exception in page.....
    System.out.println(" Fourth > ");
    povo.getCurrentRow().setAttribute("Attribute12",UnitId);
    // if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
    // pageContext.writeDiagnostics("TEST >", UnitId, 1);
    Thanks
    krishna

  • How to rename Custom Metadata Field?

    I have some pics with custom metadata field "gadget brand", i with to rename the field name to "brand", how can i do that? I tried to rename in the custom metadata manager, but it doesn't apply the change.

    Don't believe you it will allow you to rename it.
    You're going to have to create a new field with the name you want and copy the data over. Unfortunately Aperture doesn't have any built in means of copying metadata from one field to another. Applescript however could do it fairly easily.

  • How to export custom metadata fields

    How do I export custom metadata fields (or even the DATE) to a text or spreadsheet? Why does Aperture have dozens of metadata choices, but only allows a few to be exported?

    You can try Automator which must be installed already in your computer. Create a new workflow, on the left pane select Aperture to see a list of actions, select "get selected items" and "extract metadata", and drag both to the right most pane. there you'll choose the Tag names to extract from the images already selected inside aperture and choose an output method, tabbed text should work fine for a spreadsheet. Hope it works.

  • How to hide custom metadata field in custom profies ??

    hi,
    how to hide custom metadata dropdown list in a custom profile based on choosing the security group.
    ex: if i choose xxx security group, custom metadata dropdown should not appeared, for remaining security groups it should be visible.
    so, Based on criteria, custom metadata should be hidden in custom profiles..
    how to achieve it ?? where and how to configure ??
    Detail guidance should be required
    Thanks in advance

    You cannot do this through profiles alone if I understand you correctly.
    If I load a check in page, choose a security group and at this moment want a custom metadata field to disappear then you are beyond what profiles offers.
    Rules evaluation can only be based on information that is know at the time the page is requested. That means in order for this to work you would need to make security group an non editable field and have a set of profiles for each security group.
    The alternative is to customize the UI with soem DHTML or AJAX
    Tim

  • How to use customer-specific fields with FI-CA event 940?

    The following text can be found under FI-CA event 940:
    You can also set customer-specific fields if you have defined the predefined include for customer enhancements CI_FKK_ACCIT_CUS in the structure FKK_ACCIT_CUS. The fields included here must have the same field name as the fields included in the structure ACCIT. These can also originate from an enhancement of the coding block in General Ledger Accounting. The fields Reservation Class and Reservation Key of the reconciliation key and the totals record are available as import parameters.
    My requirement is to populate the field HZUON in this event, which will be called when running t-code FPG1 (Transfer of FI-CA total records to general ledger)
    The problem is the fact that the output of the event (i.e. output of function module FKK_SAMPLE_0940 at first) only have the following fields:
    E_ZUONR     LIKE     ACCIT-ZUONR     Zuordnung (BSEG-ZUONR)
    E_XREF2     LIKE     ACCIT-XREF2     Referenz  (BSEG-XREF2)
    E_SGTXT     LIKE     ACCIT-SGTXT     Positionstext
    E_BUPLA     LIKE     ACCIT-BUPLA     Businnes Place (Korea only)
    I tried adding a new field to structure CI_FKK_ACCIT_CUS and adding this field to the output of the event 940, but how do I ensure that the content of the field will be used to populate the HZUON field of the FI document during "transfer of FI-CA total records to general ledger"?
    Cheers,
    Teo

    Hi Teo,
    I happened to see this post from you when I searched for a similar scenario related to event 940. I also need to add two fields in CI_FKK_ACCIT_CUS and make these fields as outputof the event. Did you come across any solution for the same? If so, can you please share.
    Regards,
    Harikumar. S
    Edited by: Harikumar Sasidharan on Dec 30, 2009 12:14 PM

  • How to embed custom search field in toolbar

    My organization wants to integrate the Zoom Search Engine by
    Wrensoft with RoboHelp 7. We want to embed the search input field
    for Zoom in the main toolbar of the Help window. The skin editor in
    RoboHelp does not provide an easy way to do this. I can add a
    custom button that links to the custom search form, but I cannot
    figure out how to embed a custom search field in the toolbar. Does
    anyone have any experience or direction you can provide us?

    I very much doubt that can be done. There's a topic on my
    site about integrating ZoomSearch but the start point of any search
    is a field that ZoomSearch provides in the htm page it creates.
    Getting that field onto your toolbar is going to be outside the way
    Zoom was designed.
    Your developers would have to pull apart the mechanics of
    that page and figure it out, if it can be done.
    Have you tried approaching WrenSoft to see if they can
    suggest anything?
    Personally I think it is going to be a massive effort for
    minimal benefit. What's the objection to clicking a button that
    provides a page with the field and the results? If you get the
    field into the toolbar, the search page has still got to display to
    show the results.

Maybe you are looking for