How to delete data from dynamic internal table
Hi,
I have dynamic internal table and I have some slection screen fields , using these selection screen fields
(select -options), I have to filter the data? assigning will work with READ , but I have select options not the parametre,
and also delete will not work for dynamic table..
as we cannot use assigning with delete..
So how to do this?
and one more thing is , I cannot filter the data while selection( in select, I cannot filter the data-> as it's not coming directly from table, it's coming from buffer),
so now after selection of data, I need to filter the data from dynamic table.
Is there any way to do this?
Regards,
Mrunal
Hi matt,
I tried with below code as you said. But I am getting dump. can you help?
here is my piece of code.
FIELD-SYMBOLS: <LS_DATA> type any,
<LT_DATA> TYPE table,
<L_FIELD> type any.
ASSIGN <l_buffer_entry>-dataptr->* TO <LS_DATA>.
ASSIGN <l_buffer_entry>-dataptr->* TO <LT_DATA>.
LOOP AT <LT_DATA> ASSIGNING <LS_DATA>.
ASSIGN COMPONENT 'BUKRS' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BUKRS.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ASSIGN COMPONENT 'BELNR' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BELNR.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ENDLOOP.
and here is the description of my dump:->>>
You attempted to access an unassigned field symbol
(data segment 32772).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
Similar Messages
-
How to delete records from dynamic internal table.
Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
lw_line1 TYPE REF TO data.
CREATE DATA Lw_line TYPE (lw_TABNAM).
ASSIGN Lw_line->* TO <WA_tbl>.
CREATE DATA LW_LINE TYPE STANDARD TABLE OF (Lw_tabnam)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN Lw_line->* TO <TBL>.
SELECT * FROM (Lw_tabnam)
INTO CORRESPONDING FIELDS OF TABLE <TBL>
WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
for ex : ( here lc_fieldname is KUNNR)
loop at t_kunnr.
lw_tabix = sy-tabix.
Read table <tbl>
with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
If sy-subrc = 0.
*Delete
delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
Endif.
Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
<WA> TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max -
How to pass data from dynamic internal table to standard internal table
hi experts,
below is the piece of code which i have used in my requirement but the data is not moved.
LOOP AT <tab> ASSIGNING <tab1>.
MOVE-CORRESPONDING <tab1> TO wa.
append wa TO gt_outtab.
ENDLOOP.
here
<tab> - dynamic internal table.
<tab1>-dynamic internal table work area.
gt_outtab - standard internal table.
wa- standard internal table work area.
i am not getting what additional thing i have to write.
pls help me in this regard.
thankx in advance.
soham.p.Hello soham p ,
I am also using the same logic but in my program it is working fine so you declare the fieldsymols like this and try and also check the dynamic internal contain the data or not.
FIELD-SYMBOLS : <y_i_table> TYPE STANDARD TABLE,
<y_wa_table> TYPE ANY.
LOOP AT <y_i_table> ASSIGNING <y_wa_table>.
MOVE-CORRESPONDING <y_wa_table> TO y_wa_vfscaid.
APPEND y_wa_vfscaid TO y_i_vfscaid.
CLEAR y_wa_vfscaid.
ENDLOOP. -
How to read data from an internal table into a real table?
Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
EXPORTING
i_infoprovider = s_cubename
i_query = query_name
i_t_parameter = query_string_tab
IMPORTING
e_cell_data = t_cell_data
e_axis_data = t_axis_data
e_axis_info = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O -
How to move data from 2 internal table to 1 internal table
Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AMHi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
... like mkpf-...
... like mkpf-...
... like mseg-...
... like mseg-...
end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
loop at gt_mseg where ... = mkpf-...
move-corresponding gt_mkpf to gt_result.
move-corresponding gt_mseg to gt_result.
append gt_result
endloop.
endloop. -
How to populate data into Dynamic Internal Table.
Hi Experts,
I had created one Dynamic Internal table and one static internal table.I want to move data from Static Internal table to Dynamic interal table.And aslo the number of coloum of these two tables are not same.
So please help me for solving this issue.
Thanks,
<u><i><b>Seema.</b></i></u>Hi,
Check out this sample program for dynamictable report.
REPORT YMS_DYNAMICDEMO
NO STANDARD PAGE HEADING
MESSAGE-ID zcs_c2c_001.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
clear xfc.
xfc-fieldname = xdetails-name .
xfc-datatype = xdetails-type_kind.
xfc-intlen = xdetails-length.
xfc-decimals = xdetails-decimals.
append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
Select Data from table.
select * into table <dyn_table>
from (p_table).
endform.
form write_out.
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
assign component sy-index
of structure <dyn_wa> to <dyn_field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <dyn_field>.
else.
write: <dyn_field>.
endif.
enddo.
endloop.
endform.
Thanks,
Shankar -
How to insert data from different internal table into a data base table
hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work. -
How to scan data from one internal table to another
Hi All,
let me know how to scan all from one internal table to another internal table. Pls provide me the syntax and code.
i am very thankful to you all in advance.
Thanks & Regards,
Nagarjuna.if u want to copy data from itab1 to itab2 then use
itab2[] = itab1[].
if u want to compare whether both itab1 and itab2 are same or not,use
if itab1[] = itab2[].
*--same
else.
*--not same
endif.
if u want to compare itabs based on primary key....
loop at itab1.
read table itab2 with key f1 = itab1-f1.
if sy-subrc <> 0.
*--not same....
endif.
endloop.
if u want to copy only few lines(say from 1 to 3) of itab1 to itab2 then use...
append lines of itab1 from 1 to 3 to itab2.
if internal tables don't have same structure,
say only fields f1 and f2 are common,then
loop at itab1.
itab2-f1 = itab1-f1.
itab2-f2 = itab1-f2.
append itab2.
clear itab2.
endloop.
if there are many common fields then...
loop at itab1.
move-corresponding itab1 to itab2.
append itab2.
clear itab2.
endloop.
Please don't forget to reward points....!!!
Regards
vasu -
How to get data from an internal table in some other program
I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross WangHi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
bukrs TYPE t001-bukrs,
butxt TYPE t001-butxt,
END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
bukrs TYPE t001-bukrs,
butxt TYPE t001-butxt,
END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O -
How to download data from an internal table to a text
Hi All,
I want to download data from an internal table to a text file.
The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
The sample of the desired data that i require should be this way:-
13456TR|M|COUP|MATERIAL|KGS
Thanks in advance.
Regards
Satish.Hi,
Try this..
REPORT zc1download message-id zc1dwnmsg.
*& Declaration Section for the Tables *
TABLES: makt.
*& Declaration Section for the Internal Tables
DATA: intab TYPE TABLE OF makt,
wa_intab LIKE LINE OF intab,
no_of_rec TYPE i,
count TYPE i.
DATA: BEGIN OF f_intab,
str(255) TYPE c,
END OF f_intab.
DATA: t_intab LIKE TABLE OF f_intab,
w_intab LIKE LINE OF t_intab,
temp(255) TYPE c.
FIELD-SYMBOLS: <f> TYPE ANY.
*& Selection ScreenSection for the file download
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
others RADIOBUTTON GROUP rad1,
delimit TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
IF file IS INITIAL. " check to ensure file.
MESSAGE i001.
EXIT.
ENDIF.
IF others = 'X'. " check to ensure delimiter.
IF delimit = ' '.
MESSAGE i002.
EXIT.
ENDIF.
ENDIF.
SELECT * FROM makt INTO TABLE intab.
IF tab = 'X'. " default delimiter tab is used
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
filename = file
filetype = 'DAT'
mode = 'A'
TABLES
data_tab = intab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
no_authority = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE. " If user defind delimiter is to be used
Counts the number of fields *
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
IF sy-subrc <> 0.
EXIT.
ELSE.
count = count + 1.
ENDIF.
ENDDO.
LOOP AT intab INTO wa_intab.
DO count TIMES. " Adding the delimiter in required places
ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
CONCATENATE temp delimit <f> INTO temp.
ENDDO.
SHIFT temp.
APPEND temp TO t_intab.
CLEAR temp.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
filename = file
filetype = 'ASC'
mode = 'A'
TABLES
data_tab = t_intab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
no_authority = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
WRITE:/ 'The Data has been tranfered to :', file.
Cheers
Kathir!~ -
Populate data from dynamic internal table
Hi
I have dynamic internal table <lt_paxxxx>. Iam fillling <lt_paxxxx> in the following way.
select * into table <lt_paxxxx> from (infty-dbname).
I have to pass data of <lt_paxxxx> to another internal table lt_final.
'lt_final' should contain fields like <lt_paxxxx>, infty name, DB name.
Could you please help me out how to pass <lt_paxxxx> data to 'LT_FINAL'.loop at <it_table>
into <is_table>.
loop at it_fieldcatalog
into is_fieldcatalog.
assign component is_fieldcatalog-fieldname
of structure <is_table>
to <field1>.
concatenate 'IT_TABLE-'
is_fieldcatalog-fieldname
into w_field.
assign (w_field) to <field2>.
check sy-subrc eq space.
move <field1> to <field2>.
endloop.
append it_table
endloop.
regards -
How to select data from an internal table
material norm date last modified
B2-SP HEAT 50.000 20090420
BF COKE 575.000 20090419
GROSS COKE 200.000 20090419
B2-SP HEAT 100.000 20090419
TWT 33.000 20090330
B7-SP HEAT 2.000 20090310
B1-SP HEAT 1.000 20090309
B7-SP HEAT 615.000 20090308
B2-SP HEAT 585.000 20090308
B1-SP HEAT 100.000 20090308
B3-SP HEAT 610.000 20090308
BF COKE 68.500 20090308
GROSS COKE 72.600 20090308
B8-SP HEAT 600.000 20090308
B9-SP HEAT 625.000 20090308
BX-SP HEAT 615.000 20090308
B9-SP HEAT 58.000 20090307
B1-SP HEAT 100.000 20090307
B6-SP HEAT 350.000 20090306
B2-SP HEAT 888.000 20090306
Like above there r numerous data in a table :
how will i select data into another internal table where material above is not repeated with latest modified date.please help.Hi Sonu,
The main task is to move the contents of the one internal table to another with some condition.
First sort and delete the duplicate entries from the First Internal table like below :
sort it_tab by material ascending date_modified descending.
delete adjacent duplicates from it_tab.
Then move that Internal table contents to another internal table.
Define another internal table with the same structure as you have first internal table and then
Second Step :
it_itab1 = it_itab.
If you are using seperate Header line and Body then you can do like below :
it_itab1[] = it_itab[].
This will fix the issue.
Please let me know if you need any further explonation.
Regards,
Kittu
Edited by: Kittu on Apr 24, 2009 12:21 PM -
How to populate data in dynamic internal table
Hi Expert,
fyi. My dynamic internal table field is created base on data selected. Eg. select table qpcd has 5 records. These 5 recods will become fieldname to my dynamic internal table. My dynamic internal table will be
...itab
01
02
03
04
05
The 5 records from qpcd is populated in another table call viqmel. I need to find the occurance of each code in viqmel and populate the number of occurance in itab in each of column. The final dynamic itab will be like this
table itab
01 02 03 04 05 -
> field name
2 0 1 0 1 -
> data
my source code like below
Report ZPLYGRND2.
TABLES: mara, makt.
TYPE-POOLS: slis, sydes.
DATA:it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
types : begin of t_qpcd,
codegruppe like qpcd-codegruppe,
code like qpcd-code,
end of t_qpcd.
data:wa_qpcd type t_qpcd,
i_qpcd type standard table of t_qpcd initial size 0.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
select * into corresponding fields of wa_qpcd from qpcd
where katalogart = 'D'
and codegruppe = 'OOT01'.
append wa_qpcd to i_qpcd.
endselect.
loop at i_qpcd into wa_qpcd.
is_fcat-fieldname = wa_qpcd-code.
APPEND is_fcat TO it_fcat.
endloop.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
if sy-subrc = 0.
endif.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
LOOP AT <l_table> INTO <l_line>.
ENDLOOP.hello dear i m giving u a code in this a dynamic table is made on the basis of table in database , and u can download this data correct it , see it, or even change it....and upload in tht table help full if u dont know the table name...in advance.
also the code to populate data in dynamic table is in this code like:
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
look at the whole program .hope this solve ur problem thanks.
REPORT ZTESTA MESSAGE-ID ZIMM .
TYPES : DATA_OBJECT TYPE REF TO DATA.
DATA : MITAB TYPE REF TO DATA .
TYPE-POOLS : SLIS .
DATA : IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
WITH HEADER LINE .
DATA : IT_FIELDCATALOG TYPE LVC_T_FCAT .
DATA : WA_FIELDCATALOG TYPE LVC_S_FCAT .
DATA : I_STRUCTURE_NAME LIKE DD02L-TABNAME .
DATA : I_CALLBACK_PROGRAM LIKE SY-REPID .
DATA : DYN_LINE TYPE DATA_OBJECT .
FIELD-SYMBOLS : <FS_ITAB> TYPE STANDARD TABLE .
DATA : TABLE_NAME_IS_VALID TYPE C .
DATA : DYNAMIC_IT_INSTANTIATED TYPE C .
CONSTANTS BUTTONSELECTED TYPE C VALUE 'X' .
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_TABL.
PARAMETERS : MTABLE_N LIKE RSRD1-TBMA_VAL
MATCHCODE OBJECT DD_DBTB_16 OBLIGATORY .
DATA CHECKTABLED.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_FILE.
PARAMETERS : MFILENAM LIKE RLGRAP-FILENAME .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_DOWN.
PARAMETERS : P_DOWNLD RADIOBUTTON GROUP GRP1
USER-COMMAND M_UCOMM .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_CHKF.
PARAMETERS : P_CHKFIL RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_UPLD.
PARAMETERS : P_UPLOAD RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_SHOW.
PARAMETERS : P_SHOW_T RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT .
PERFORM CHECK_FILENAME .
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
CHECKTABLED = MTABLE_N+0(1).
IF CHECKTABLED NE 'Z'.
MESSAGE I017.
LEAVE TO SCREEN 1000.
ENDIF.
IF SY-UNAME NE 'KAMESH.K'.
MESSAGE I023 WITH SY-UNAME.
LEAVE TO SCREEN 1000.
ENDIF.
ENDIF.
IF SY-UCOMM = 'PRIN'.
CHECKTABLED = MTABLE_N+0(1).
IF CHECKTABLED NE 'Z'.
MESSAGE I017.
LEAVE TO SCREEN 1000.
ENDIF.
IF SY-UNAME NE 'KAMESH.K'.
MESSAGE I023 WITH SY-UNAME.
LEAVE TO SCREEN 1000.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MFILENAM .
PERFORM F4_FOR_FILENAME .
INITIALIZATION .
T_TABL = 'Table Name' .
T_FILE = 'File Name' .
T_DOWN = 'Download Table' .
T_CHKF = 'Check File to Upload' .
T_UPLD = 'Upload File' .
T_SHOW = 'Show Table Contents' .
START-OF-SELECTION .
PERFORM CHECK_TABLE_NAME_IS_VALID .
END-OF-SELECTION .
IF TABLE_NAME_IS_VALID EQ ' ' .
MESSAGE I398(00) WITH 'INVALID TABLE NAME' .
ELSE .
PERFORM INSTANTIATE_DYNAMIC_INTERNAL_T .
CHECK DYNAMIC_IT_INSTANTIATED = 'X' .
CASE BUTTONSELECTED .
WHEN P_DOWNLD .
PERFORM SELECT_AND_DOWNLOAD .
WHEN P_CHKFIL .
PERFORM CHECK_FILE_TO_UPLOAD .
WHEN P_UPLOAD .
PERFORM UPLOAD_FROM_FILE .
WHEN P_SHOW_T .
PERFORM SHOW_CONTENTS .
ENDCASE .
ENDIF .
FORM CHECK_TABLE_NAME_IS_VALID.
DATA MCOUNT TYPE I .
TABLES DD02L .
CLEAR TABLE_NAME_IS_VALID .
SELECT COUNT(*) INTO MCOUNT FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'TABL'
AND OBJ_NAME = MTABLE_N .
IF MCOUNT EQ 1 .
CLEAR DD02L .
SELECT SINGLE * FROM DD02L WHERE TABNAME = MTABLE_N .
IF SY-SUBRC EQ 0.
IF DD02L-TABCLASS = 'TRANSP' .
TABLE_NAME_IS_VALID = 'X' .
ENDIF .
ENDIF.
ENDIF .
ENDFORM. " CHECK_TABLE_NAME_IS_VALID
FORM SELECT_AND_DOWNLOAD.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
MESSAGE I398(00) WITH 'Table' MTABLE_N
'successfully downloaded to '
MFILENAM .
ENDIF.
ENDFORM. " SELECT_AND_DOWNLOAD
FORM UPLOAD_FROM_FILE.
DATA : ANS TYPE C .
DATA : LINES_OF_ITAB TYPE I .
DATA : MSY_SUBRC TYPE I .
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
TEXTLINE1 = 'Are you sure you wish to upload'
TEXTLINE2 = 'data from ASCII File to DB table '
TITEL = 'Confirmation of Data Upload'
IMPORTING
ANSWER = ANS.
IF ANS = 'J' .
PERFORM CHECK_FILENAME.
CLEAR MSY_SUBRC .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
IF SY-SUBRC EQ 0.
DESCRIBE TABLE <FS_ITAB> LINES LINES_OF_ITAB .
IF LINES_OF_ITAB GT 0 .
MODIFY (MTABLE_N) FROM TABLE <FS_ITAB> .
MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
ENDIF .
ENDIF.
IF MSY_SUBRC EQ 0 .
MESSAGE I398(00) WITH LINES_OF_ITAB
'Record(s) inserted in table'
MTABLE_N .
ELSE .
MESSAGE I398(00) WITH
'Errors occurred No Records inserted in table'
MTABLE_N .
ENDIF .
ENDIF .
ENDFORM. " UPLOAD_FROM_FILE
FORM F4_FOR_FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_PATH = 'C:\'
MASK = ',.,..'
MODE = '0'
IMPORTING
FILENAME = MFILENAM
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " F4_FOR_FILENAME
FORM CHECK_FILENAME.
IF MFILENAM IS INITIAL
AND NOT ( MTABLE_N IS INITIAL )
AND P_SHOW_T NE BUTTONSELECTED.
CONCATENATE 'C:\'
MTABLE_N '.TXT' INTO MFILENAM.
ENDIF .
ENDFORM. " CHECK_FILENAME
FORM INSTANTIATE_DYNAMIC_INTERNAL_T.
CLEAR DYNAMIC_IT_INSTANTIATED .
I_STRUCTURE_NAME = MTABLE_N .
CLEAR IT_FIELDCAT[] .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = I_STRUCTURE_NAME
CHANGING
CT_FIELDCAT = IT_FIELDCAT[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
LOOP AT IT_FIELDCAT .
CLEAR WA_FIELDCATALOG .
MOVE-CORRESPONDING IT_FIELDCAT TO WA_FIELDCATALOG .
WA_FIELDCATALOG-REF_FIELD = IT_FIELDCAT-FIELDNAME .
WA_FIELDCATALOG-REF_TABLE = MTABLE_N .
APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG .
ENDLOOP .
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_FIELDCATALOG
IMPORTING
EP_TABLE = MITAB .
ASSIGN MITAB->* TO <FS_ITAB> .
DYNAMIC_IT_INSTANTIATED = 'X' .
ENDIF.
ENDFORM. " INSTANTIATE_DYNAMIC_INTERNAL_T
FORM SHOW_CONTENTS.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
IT_FIELDCAT = IT_FIELDCAT[]
TABLES
T_OUTTAB = <FS_ITAB>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " SHOW_CONTENTS
FORM CHECK_FILE_TO_UPLOAD.
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
IT_FIELDCAT = IT_FIELDCAT[]
TABLES
T_OUTTAB = <FS_ITAB>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDIF .
ENDFORM. " CHECK_FILE_TO_UPLOAD
Message was edited by:
SAURABH SINGH
SENIOR EXECUTIVE
SAMSUNG INDIA ELECTRONICS LTD.,NOIDA -
How to upload data with dynamic internal table
Hi,
I have to upload the basic , sales, purchasing view data by using bapi depend on check box selected for views.
i have filled fieldcatalog for selected views and pass the field catalog structure to dynamic int table and
import it into the field symbol <fs_data>. this field symbol assigned to <fs_1>.
then callED the 'GUI_UPLOAD ' and when i pass field symbo for function module i am getting first 10 rows 0f the file .
flat file has basic data,sales ,purchase fields data
ex: i was selected basicview and purchase view and execute i am getting basic,sales view data.
how can i get only basic and purchase data.hi ,
please find code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = lt_fieldcatalog
IMPORTING
ep_table = <fs_data>
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0. "#EC NEEDED
ENDIF.
So <FS_1> now points to our dynamic internal table.
ASSIGN <fs_data>->* TO <fs_1>.
Next step is to create a work area for our dynamic internal table.
CREATE DATA new_line LIKE LINE OF <fs_1>.
A field-symbol to access that work area
ASSIGN new_line->* TO <fs_2>.
ASSIGN new_line->* TO <fs_3>.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_f
filetype = 'DAT'
TABLES
data_tab = <fs_1>
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
How to copy data from one internal table to another
i am using some function module to get some data for my function module
and the retrieved data is not getting populated in mu fumctional module
i am sucessful in getting the data to an internal table in my function module but dont know how to pass it to my table parameter
thanks in advanceHi Naval,
Declare an internal table of type table parameter structure and pass it the table parameters of the Function module.
Check the code for this function module.
DATA IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
SELECT * FROM MARA UP TO 10 ROWS INTO TABLE IT_MARA.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\TEST.TXT'. FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = 'X'
<b> TABLES
DATA_TAB = IT_MARA</b>
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Vinay
Maybe you are looking for
-
How do i install Itunes on my windows(7) PC? i followed the guidelines issued outlined by Apple in KB TS5376 but i keep getting the message, the file "itunes library.itl" cannot be read because it was created by a newer version of itunes. what steps
-
Iomega Firewire/USB External NOT MOUNTING!
I have a 320Gig Iomega hard drive and i've been having some issues with it. when i try to mount it on my powerbook, it only shows as greyed out in the Disk utility, i can verify and repair, i ran the repair which took a VERY long time, and restarted,
-
JRadioButton,ButtonGroup,overrides a deprecated API
Hi guys, I need to know which JRadioButton is selected in a ButtonGroup. I have to methods to do it. The problem is that I need to communicate this to other class is in other file. I have enclosed a JRadioButton variable in the other class importing
-
Im considering getting the D-Link DNS-323 for my wireless network to be my backup for Time Machine. Anybody has used this with their macs? I read that there is a software to install before you can access the NAS. I wonder if it can be used with OSX o
-
I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough
I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough