How to Delete Development & Potential Form in Talent Management

Hi Guruz,
Please let me know the correct method to delete forms (Development & potential )forms in Talent assessment .
We deleted the forms via PHAP_CATALOG, but they are still visible in Define Forms for Talent Assessment under Talent Assessment, & the system is not allowing to delete it from this node as it gives the below mentioned error:
Appraisal Template was not deleted:
Message no. HRHAP00_TEMPLATE010
Diagnosis
The system may have canceled the deletion for one of the following reasons:
The system cannot delete the element, for example if it is a category group.
The business check found errors.
The element is already released or in history.
The system could not delete the entire structure (one of the above- mentioned reasons could be the cause).
Please let me know what & how to get rid of this problem.
Regards
Bharti Sood

Hi Bharti,
You must first delete the template names from the customizing tables where it is stored (under Talent Assessment node of Talent Management and Talent Development). Then you delete it under PHAP_CATALOG. Unfortunately you have created an databse inconsistency and you might need to see if Basis can delete the values from the table.
Best regards,
Luke

Similar Messages

How to delete developer's SAP UserID and his SSCR key on SMP?

How to delete developer's SAP UserID and his SSCR key on SMP?
Dear Experts,
Background:
I want to delete developer's SAP UserID and SSCR key in QAS and SMP.
Because as I known, developer's SAP UserID(registered SSCR key) is belonging to the SAP License measurement.
I want to rid of the useless developer's SAP userID and the SSCR key registered on SMP.
====================Here below is the message I created===================
Dear Expert,
One of our developers whom registered SSCR key left, I want to delete
his SAP UserID and his SSCR key.Can you pls tell me how to implement?
What might have happened(expecially the downside) in the corresponding
SAP Client if I delete the developer's SAP UserID and SSCR key? Will
it cause our system screw up?
I've searched the answer on SDN. Someone told me I should carry out the
follow steps below:
(1)Delete the Developer's SSCR key on Service Market Place(SMP).
(2)Cancel all the Jobs defined by the Developer in DEV.
(3)SU01, Replace the value 'Developer' with Blank at the 'LicenceData'
lable.
(4)Delte corresponding item of the Developer in 'DEVACCESS' table.
(5)Lock/Delete the Developer.
Is that right?
Thanks!
Jason
====================Here below is the reply from SAP===================
Dear Customer,
When the SSCR Developer/Object keys are transfered to the system, the
keys are stored in the following tables:
o DEVACCESS : Developer keys
o ADIRACCESS: Object keys
But we do not have any report programs to delete the entries from these
tables. If the customer wants to delete the entries, he has to write a
local program to delete the table entries.
SAP does not recommend ever cleaning out these developer keys, as long
as the user ID is Locked / Deleted, that is the main thing.
please Cancel all the Jobs defined by the Developer in DEV.
So my recommendation to you is to first lock the user id of the user.
Then Assign him a new userid which is not identical to the first one andthen subsequently delete the old userid.
If you have an absolute need to delete a developer key without deleting
a user then the easiest way to do this is probably to
write a report with the instruction :
delete from DEVACCESS where UNAME = ....
Please note :
There is no recording, who did what in the table, that is why SAP strong-ly does not recommend this, and customers will have to take responsibil-ity for this action.
Thanks
====================My question is:===================
Do you have any better suggestions?

Hi,Rahul,Raghunandan
Thank you very much!
Her below were the SAP Support's main suggestions:
1. Lock the user id of the user, then Assign him a new userid which is not identical to the first one and then subsequently delete the old userid.
2. If you have an absolute need to delete a developer key without deleting a user then the easiest way to do this is probably to write a report.
I want to know if I can delete the SSCR key directly via a particular TX? If I can, what is it? (I just want to know. For safety, I think I won't delete the SSCR key directly remained in 'DEVACCESS'.)
Thanks!
Jason

Development Plans functionality in Talent Management

Hello,
We are planning to use the Development Plans functionality in Talent Management.
But the Development Plan is not opening from MSS. (MSS -> Talent management -> Assessment -> Development Plan).
I had created the Business partner object for all my test PERNRs and I had created a Development Plan Template (via IMG step in Talent management). I had activated the Business Functions and Services.
When I open the Development plan in MSS, it is showing the names of employees (i.e. the reports of the manager). But when I click on an employee, it's not opening any development plan. Nothing is happening.
Please help me,
Thanks
Raghu

Hi Bharti,
You must first delete the template names from the customizing tables where it is stored (under Talent Assessment node of Talent Management and Talent Development). Then you delete it under PHAP_CATALOG. Unfortunately you have created an databse inconsistency and you might need to see if Basis can delete the values from the table.
Best regards,
Luke

Need help Development Planning : Part of Talent Management

Hi All,
I need to turn on new functionality for Development Planning (part of Talent Management), I looked online for material..I did find some but none of them explains configuration steps.
Can someone guide me on the same.
Regards,
Shweta

hi
can u explain what exactly are you trying to do ,?
which enhancement pack you currently are on?
Regards
sameer

How to delete Development Configuration entries

I have used document "How To... Setup CM Services" to configure NWDI with CTS+ for a Portal environment.
My STMS configuration in the CTS+ server looks like this:
EPU -> EPD -> EPQ -> EPP
EPU = Upload System
EPD = Development
EPQ = Quality
EPP = Production
Everything was going ok but by mistake I created the upload system in the CTS+ environment with the option "Create development configuration" and this generated an entry in the Development Configuration of the NWDI which I am not able to erase because the delete option is not active. I have tried to fix it by deleting the system EPU in the STMS of my CTS+ server but even though I no longer see the system in STMS I still see it in the NWDI.
How can I delete Development Configuration entries? Any help will be appreciated.
Regards,
Ayax
Edited by: Ayax Morales S?chez on Sep 8, 2010 12:28 AM

Hi,
For the sake of completeness;
Solution: Direct call to Web Service using the Web Service Navigator:
1)     Call http(s)://<host>:<port>/wsnavigator
2)     Click on u201CProvider Systemu201D, then u201CSearchu201D, then in the table u201CDIConfigurationServiceViu201D:
3)     Click on u201CNextu201D, then u201CdeleteDISystemu201D
4)     Click on u201CNextu201D, then remove all u201CSkipu201D ticks, set certificate to u201CanySimpleTypeu201D, u201Cpasswordu201D to the password of the system, u201Cuser Nameu201D to the user, u201CsystemIDu201D to the name of the development configuration:
5)     Click on u201CNextu201D. The development configuration should now be gone.
Thanks
Kenny

How to delete developer access key

Hi Experts,
How can i delete developer access key from SAP user,
Regards

The user is registered as a developer for a certain system at SAP. I do not know if there is a way for deregistering a user. If the user has a developer role AUTHORIZATION OBJECT, he can enter the key received from SAP. Once entered, it is stored in DEVACCESS.
Just remove the DEVELOPMENT AUTHORIZATION OBJECT from the user and the key is useless because it can not be entered again..
Regards,
Clemens

Sapscript : how to delete an empty form

Hi experts,
is it possible to delete a sapscript form when the form is empty ?
Regards,
David

Hi Bharath,
thanks for your answer.
Is it possible to do it into an ABAP Program (with FM) ?
Regards,
David

Development plan by Employee - Talent Management

Dear Luke,
Greetings.
From one of your blog understand very clearly that Development plans are only accessible by TMS and Manager. And not by Employee. But this could be well accepted when the it comes to larger organization.
In the event of small or mid size kind of organization one of the main requirement is that they want the Employee to view the development plan set for them. Because these Development plans are not only for the purpose of Succession planning rather to address the gap in Position vs Person related competency.
Would be extremely helpful if can share a solution pertaining to getting the Development Plan in Talent Management viewable by Employees.
Would appreciate your inputs.
Kind regards
Sathya

Hi Sathya,
By default this is not possible, but I know that Chris McNarney has done this before. It is quite complex to code from what I remember because it involves generating the MEM_ID.
Best regards,
Luke

How to download the database form the call manager 7 to excel?

how to download the database from the call manager 7 to excel document?

No, it never did - the "ask" for the DRS folks to provide unencryption capabilities for their TARs is still out there (several other BUs want this) but so far as I know there's been zero movement on it. I've about given up hope on the DRS folks at this point - pretty clear this isn't a priority for them and I don't see much in the way of any kind of improvements on the product schedule for them at all, this included.
As a side note I've been pushing the Connection product managers to give us off box file system access to limited directories via a proxy service and roles (i.e. similiar to the ODBC proxy but for SFTP access) - armed with this we can provide our own (far superior) disaster recovery tools that work on a pull model instead of the full push DRS is built on - this would get partial backups, individual restores, about 6x increase in performance (more actually - I have a prototype that is hovering right around 10x the speed of DRS end to end), smaller backups, requires less space and resources on the server etc... etc... Fun stuff like doing a full backup on Sunday mornings and deltas every day of the week after that and another full backup Sunday etc... would be possible. Imagine.
I'll probably get more traction with that but it's a long road I'm afraid - as ever, asking your account team to enter a PERs helps - makes it more difficult for the product folks to delay on assigning engineering resources to such efforts.

How to Run Developer Suit Form 10g

my question is
how to run form in developer suit i was using developer 6I now i want to run my module to developer suit 10g first i install developer suit 10g then database 10g and make a simple module of emp table
now when i run its give me error The HTTP Listner is not runing
i start OC4J Instance then again i run the form its run and install
Jinitator 1.3.1.22
then its give me again error
ORA-12560 Tns protocol adopter failure
i check my firewall setting its check all program and service excluding Remote disktop
I check my TNSNAMES.ORA file its look like
# tnsnames.ora Network Configuration File: d:\DevSuiteHome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
uid=shah;pwd=a;
i save my module in D:\module1.fmb so there is no space in folder
but still i am facing the same error
i not one thing that i connect with just my user id and password and left blank in database
Just like
USERID = SCOTT
PASS = TIGER
DATABASE =
Any one know how to solve this problem
Thanks
Shahzaib ismail
Developer Suit 10g, Database 10g, OS Window XP

well when i connect with my database i right
username = Scott
password = tiger
and i left blank in database row
because when i insert orcl in database row its give me error
TNS No listener
i search listener.ora file and i found in
d:\devsuit_home1\network\admil
*# listener.ora Network Configuration File: d:\DevSuiteHome_1\NETWORK\ADMIN\listener.ora*
*# Generated by Oracle configuration tools.*
SID_LIST_SERVER =
*(SID_LIST =*
*(SID_DESC =*
*(GLOBAL_DBNAME = Oracle8)*
*(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)*
*(SID_NAME = ORCL)*
*(SID_DESC =*
*(GLOBAL_DBNAME = orcl)*
*(PROGRAM = orcl)*
*(SID_NAME = orcl)*
*(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)*
*(SID_DESC =*
*(GLOBAL_DBNAME = orcl)*
*(PROGRAM = orcl)*
*(SID_NAME = orcl)*
*(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)*
SERVER =
*(DESCRIPTION =*
*(ADDRESS = (PROTOCOL = TCP)(HOST = SERVER)(PORT = 1521)(SEND_BUF_SIZE = 1521)(RECV_BUF_SIZE = 1521))*
LOGGING_SERVER = OFF
SAVE_CONFIG_ON_STOP_SERVER = TRUE
what can i do now ?

How to delete FXFactory presets form effect panel

I am trying to delete FxFactory plug ins that I think are leftover form a demo. I unistalled the FXF program but the presets remain in the Effects panel. They have a watermark and I do not want them there anymore...anybody know how to remove?

Hi Mike Ditz,
Pleasr go to following locations and remove that plugin and check if it works.
Windows: C:/Program files/Adobe/common/plugins/7.0/MediaCore
Mac: Mac HD or Startup Drive/Library/Application support/Adobe/common/Plugins/7.0/MediaCore.
Regards,
Vinay

How to open Developer 10gR2 Forms using clients OS JVM?

Hi,
My users are having trouble trying to open oracle forms 10.1.2.0.2 and downloading JInitiator file 1.3.1.22 from F&rR AS for the first time. I've heard there's a way to configure my AS to let my users open the same oracle forms but using their own operating system JVM.
With that I would not only be solving problems related to slow downloading and installation of JInitiator file but also problems that come up due to diferent OS and web browsers (IE 6, IE 7, IE 8, Mozilla, etc.) and their versions which are also part of the problem.
Thanx for your quick response
Regards,
Roberto P.

This is a confused and confusing issue. There are no quick fixes. Bear in mind the following points:
Word is a client program. It can only open documents that can be seen from a client PC. If you cannot see your database server's directories from a client PC (and I would hope you can't) you cannot open that document.
what you are left with is creating a copy of that document, transporting it to the client realm, and then overwriting it back on the server after your user has finished with it (if they're editing).
there are many different ways of doing this, but they will probably involve writing an API in VisualBasic or Java. Alternatively you might look at Oracle's IFS.
This is not the right forum for a detailed solution - try the Developer forum (or IFS if that floats your boat).
Good luck, APC

How to delete data definition form XML Publisher Administrator

Hi all,
I want to ask is there any possibility to delete existing data definition from XML Publisher Administrator responsibility?
Version: 11.1.0.7.0
Regards,
Alexander.

Hi,
Once you opened the page, before do any action in it follow the below steps.
1. Click the link 'About this page' in the left bottom.
2. Click the Expand All option under page definition
3. Then click on the view object 'TemplatesVO2' against the view attribute 'Data Source Name'
4. A select query will be appeared in that you can find the source table for that particular page.
Regards,
Sathya

How to delete the duplicate copy in version management?

Hi,
I have reverted the previous version. it is getting back the version on my user id.
but i selected the active version again and clicking on RETRIVE button..now it is creating another duplication version.
so i want to delete that one.
anybody can give me some inputs.
Thanks in Advance,
Raj

Hi Mohaiyuddin,
here i have versions in the given form.
Version(s) in the development database:
activ             46C       JD1K962821           07/30/2008 09:24:55 VEERA
Version(s) in the version database:
00035 U          46C       JD1K962821           07/30/2008 09:24:55 VEERA
00034 U          46C       JD1K962821           07/30/2008 09:24:11 VEERA
00033              46C       JD1K961908           07/10/2008 14:49:49 SURYA
here except active version i have 2 duplicate versions on my user id. so i want to delete those versions.
Thanks in Advance,
Raj

How to delete Job Documentation in JSM Solution Manager

Hi,
I am trying to define some job documentation in "JSM Solution Manager", how can I delete unwanted Job Documantation there.
Don't see any remove button.
Thanks for help
sahmad

Hello,
We too are facing same issue. Can you please share your solution.
Regards,
Mudasir.

How to Delete Development & Potential Form in Talent Management

Similar Messages

Maybe you are looking for