How to delete diagnostic and usage data on iPhone 5s without resetting the phone

In my iPhone 5s I would like to--- remove the long list of, diagnostic and usage data ,---without resting the phone.
Any way out.
I tried selecting each one and deleting, but not possible.
Hoping for a reply soon.
Thanking you in advance.
                                               Dr.Anand.M.Kurian

Resetting the phone (pressing and holding the Home and power buttons until the Apple appears), doesn't delete any data.
To the best of my knowledge, the only way to delete those files is by restoring the phone.

Similar Messages

  • How to delete diagnostic and usage data

    Can the diagnostic and usage data be deleted?

    Resetting the phone (pressing and holding the Home and power buttons until the Apple appears), doesn't delete any data.
    To the best of my knowledge, the only way to delete those files is by restoring the phone.

  • How to delete diagnostic and usage from mac pro

    how to delete diagnosiic and usage data from mac pro

    sadastha wrote:
    how to delete diagnosiic and usage data from mac pro
    Can you pinpoint what 'diagnostic and usage data' you are referring to?  More details would be helpful including the model MBP you are using and the OSX.
    Ciao.

  • How to delete diagnostics and usage data?

    I am using ipad1 and ipad2. How to delete diagnostics and usage data?
    Regards,
    Ms Ong

    You would have to restore the iPad and set it up as new. The data would eventually come back as you use the iPad so you may as well not worry about it. It uses very little space on the iPad.

  • How do I delete diagnostic and usage data on my iPad 3 please

    Hi, I am very new to iPad/Apple (sorry), have been operating with Windows for so long now, and have recently bought a new iPad 3 Wi Fi Cellular.
    I was wondering around my iPad yesterday and noticed under > Settings > General > About > Diagnostics and Usage Data > Data - pages of apps
    I had downloaded and tried out etc, and than deleted those apps - no longer using them, but all this information is still on my Data page.
    Could you please tell me please how to delete all this data, I have tried unsuccessfully. I have deleted a great many apps, but the data is still there - I would  like to know how to clear or delete the diagnostic and usage data please?
    The other question I have is that all this data must be taking up kb/mb/space on my iPad.
    Thank you so much for your help and advice ~ greatly appreciated.

    FYI
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • How to clear/delete diagnostic and usage data records?

    The records under diagnostic and usage getting more each day and i have no ideas on how to delete it. Have try to sync with pc via iTunes and off the function under setting/privacy/location service/systems services/diagnostic and usage. Non works, please HELP!

    FYI
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • How can I delete diagnostics and usage data from my Ipod 4.1?

    In settings, General, About there is Diagnostics and Usage. I went in there to find many logs, Low Battery, Low Memory logs and Stacks which I don't even know what they are.  Is there a way to delete this?  Should I ever save any?  Are they important?  I would appreciate any help anyone can give me. Thank you in advance for any quick fix on this matter, if there is ever one lol. 

    How to delete diagnostic and...: Apple Support Communities
    Thy are not really useful for the errors you mentioned. Those are common and expected.

  • Diagnostic and usage data collection

    This job is still running in 10.7.
    Even if I switched off "System - Security - Privacy -> Send diagnostic and usage data "
    The process tries to contact Apple.
    Any way to switch it off forever?

    did you try below blog, i think its really good to try:
    How to reduce the size of logging database OR How to purge the old data from Logging Database
    good information here.
    Understanding the Logging Database (SharePoint Server 2010)
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Problem removing Diagnostic and Usage Data Log

    I have had several iPod crashes and ironically that's not my problem. The problem is the Diagnostic and Usage Data log is getting larger and larger. I have my iPod Touch 4th Gen. set to not send reports to Apple and I do no see any way to delete or editing it. Is there a way to delete the  log or remove some of its lines of reports or dose it have to be sent to Apple to remove it?

    I may be a little rusty on the rules here but I didn't think hijacking a thread was not aloud. If it was me I would have started my own thread instead of taking the original question in a different direction. Just sayin.
    We I was looking for my answer I found yours.
    http://support.apple.com/kb/HT2534

  • Reactivate Console's "Automatically Send Anonymous Diagnostic and Usage Data to Apple"

    I accidentally unchecked "Automatically Send Anonymous Diagnostic and Usage Data to Apple" on Console Preferences and immediately after that, this option grayed out, don't understand why. For me it's ok to send that information, I understand it helps to improve Apple's software performance and future software updates.
    Could you please help me to reactivate this automatically?

    As I am writing this I don't see a way to reenable that checkbox (I'll keep searching).  FWIW the Console help says the following about that checkbox:
    If you deselect “Automatically send diagnostic and usage data to Apple”, you will no longer see the option. When you encounter one of the events described earlier, you’ll see the message asking if you want to send diagnostic information to Apple.
    So unless I can find a way to reset it (haven't looked at plists yet or did any real research) it appears to be a one way switch.  Once thrown, it's off, period.
    Just found this which only repeats what Console Help says:
    Mac OS X v10.6.3: Diagnostic and usage data collection

  • Duplicates of a song on iPhone 4s but not in iTunes. Unable to delete duplicate. Won't play and won't let you swipe to delete. Any ideas on how to do so without resetting the phone?

    I have duplicates of a song on an album. One of the duplicates is grey with no album cover. When you attempt to swite and delete, the track will not delete and will not even play. I've contacted iTunes store and the person I received the support email from told me that it may not be downloaded. I emailed him back and explained that no there is no download for that song in my itunes store on my phone.
    One I never received an answer back which shows you how well these people do their job.
    Two: I really would prefer to have a solution to this problem without having to delete all of my music from my phone or resetting my phone. Because this duplicate isn't even showing up in my iTunes, it's only showing up on my phone.
    When I attempt to find it in my itunes it plays fine. But when I try to find the file to delete it, it is no where to be found. I've tried everything that I could think of to get rid of it. And I don't want to leave the album/artist off my phone because I do enjoy their music... And I have the microsoft sync in my car.
    Anyone got any ideas on how to do this without resetting the phone and/or taking my music off?

    If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
    This should take all the music off your phone .Then you can resync the music back on to it.
    If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

  • How to find when and what date my iphone was first switched on from a retailer

    how to find when and what date my iphone was first switched on from a retailer

    Depending on the Code version you are running you can look for this output . It will show when a SFP was removed and inserted.
    module-2# show port-config internal all  (This command wil differ of earlier versions of SAN OS )
    Mar 20 08:53:45 2011  00449361  fc2/20         ---   DOWN   Xcvr inserted          
    Mar 20 08:53:32 2011  00829429  fc2/20         ---   DOWN   Disable                
    Mar 20 08:53:32 2011  00826403  fc2/20         ---   DOWN   Disable                
    Mar 20 08:53:32 2011  00818936  fc2/20         ---   DOWN   Xcvr removed  

  • How can I save the settings of my iPhone 4 before resetting the phone in addition to saving the apps etc. by synchronisation with i-tunes

    How can I save the settings of my iPhone 4 before resetting the phone in addition to saving the apps etc. by synchronisation with i-tunes

    All the phone settings are save in the backup which is automatically created when you sync the phone.
    http://support.apple.com/kb/HT1766
    Please clarify what you mean by "resetting" the phone. When you reset the phone, no data is deleted.  Do you actually mean Restore the phone?  See the User Guide, Appendix B for the correct terminology,
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

  • How do I transfer itunes music to my iphone 4 without using the restore from this backup function?

    How do I transfer itunes music to my iphone 4 without using the restore from this backup function?  I cannot use the back up function as have been advised that therer are bugs in it and restoring it back to my phone will bring the bugs with it and phone will be back to apple again as will start playing up again.  But I need the music.  Whn I plug it in laptop and go to itunes icon it gives me 2 options:  Set up as new iphone? OR Restore from backup.
    Do I pick set up as new phone?  I dont know as the guy at the genius bar told me there would be an option asking if i want to sync itunes only...but there isn't.

    Set up as New and then... Re-Sync your Content from iTunes.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/

  • HT201328 Can i upgrade my iphone 4 unlocked from ATNT and currently on iOS 5.1.1 to latest iOS 6 coming with iphone 5 without locking the phone again.

    Can i upgrade my iphone 4 unlocked from ATNT and currently on iOS 5.1.1 to latest iOS 6 coming with iphone 5 without locking the phone again.

    If it was officially unlocked by AT&T, it will remain unlocked during an upgrade of the iOS. If it was hacked to provide unlocking, it will most likely lock to the original carrier.

Maybe you are looking for

  • New Apple Airport Time Capsule Suddenly Stopped Being Recognized by IMAC

    It worked flawlessly for a little over a month or so. Then suddenly it is not recognized. It's ID has changed when I look in Time Machine, so I hesitate to reselect this "data" ID that was not what was setup in the store (and which worked flawless fo

  • Job Cancelled Problem

    Hi Masters, In SM37 I seen that 3 jobs were cancelled. Pls see below: ====== Job started Step 001 started (program RSSTAT1, variant &0000000002410, user name ALEREMOTE) Log:Programm RSSTAT1; Request REQU_3ZAF2Q2IY0EE5RZCTYPE2FCAT; Status ; Action Sta

  • Win7 - Audigy 2 ZS - CMSS

    Win7 - Audigy 2 ZS - CMSS7 Hello everyone, Before you all start thinking, ohh he just registered to get what he wanted, yes your right, thats what i have done. I installed Windows 7 Ultimate 32-bit on my computer today, before installing Windows 7 i

  • Printing Polish from Unicode ECC system

    Hi, to print Polish characters as SAPscript, ABAP-list or SmartForms from a ECC 6.0 already converted in Unicode, is it right way cascading fonts, SAPWIN, SAPSprint, ecc. ? Or... can I use "classic" HPLJ4000 device type with access method D? My ECC s

  • How to install CS5 on Yosemite 10.10.1?

    I am trying to install Adobe CS5.5 (an update via CS2) from a cd (CS2) on my new iMac (running Yosemite 10.10.1). I get a error message saying it doe snot support Power PC applications so I can't access the installer disc (via remote disc). Can I dow