How to delete Dialog instance on NW04
Hi guys
I have an installation NW04 on Cluster MSCS:
Central Instance on node A
SCS instance on Cluster Disk
Dialog instance on node B
We have performed upgrade to NW04s, and now in postprocessin we should deinstall Dialog Instance and install it again with software NW04s.
Here documentation guide:
****************************************+
After the upgrade of the central instance, you need to upgrade the dialog instance to the new release.
Due to the fact that some special settings and binaries on a dialog instance cannot be upgraded
remotely, you can only upgrade a dialog instance by uninstalling the old instance and then installing
a new dialog instance with the tool SAPinst.
Procedure
1. Uninstall the old dialog instances as described in the document Installation Guide ‒ SAP Web Application
Server 6.40 Java on <Operating System>: <Database>, Part II Installation and Post-Installation.
2. Install the new dialog instances as described in the document Installation Guide ‒ <SAP NetWeaver /
SAP application> <Technology> on <Operating System>: <Database>.
Point 1, is :
*************+
1. Log on as a user with domain administration rights.
2. Choose Start u2192 Settings u2192 Control Panel u2192 Add/Remove Programs.
3. The Add/Remove Programs dialog box appears.
4. Find the SAP entries.
. Note
Each SAP instance that is installed on the computer is listed with an entry like SAP Application Server
for System <SAPSID> instance.
5. Choose Remove.
The SAP Uninstall Wizard starts.
6. In the Welcome window, choose Next.
The dialog box Uninstalling SAP System appears for you to select an uninstall method
Depending on your selection, note the following when you use the check box to delete an SAP instance:
-- If your check box is marked gray, you delete or uninstall the following:
The SAP instance directory, for example:
\usr\sap\<SAPSID>\D00
Services, for example:
SAP<SAPSID>_00
The whole system directory, for example:
\usr\sap\<SAPSID>\*
-- If your check box is marked black, you delete or uninstall the following:
The SAP instance directory, for example:
\usr\sap\<SAPSID>\D00
Services, for example, SAP <SAPSID>_00
The whole system directory, for example:
\usr\sap\<SAPSID>\*
Local and domain user accounts
If you have different SAP instances that use the same <SAPSID>, you can delete the instance
directory only.
The wizard informs you when the SAP system or selected instances have been deleted successfully
But in my node B there is no SAP entry on Start u2192 Settings u2192 Control Panel u2192 Add/Remove Programs, however Dialog Instance exists, and windows service exists...and so on...
So how can we deinstall this dialog instance???
Thanks and regards
Javier
Hi
In node A there is JC30 (Java central instance)
In node B there is J32 (Java Dialog instance)
SCS31 (Services Central Instance) is now in node A, but can be switched.
Database Instance is OUTSIDE, is located on a Unix Server. (is not affected in this case)
Looking node B, there is no entry on Adding/Removing Programs regarding to SAP instance.
Of course, I can see windows services on node B, one for J32, other for SAPoscol, and one more for SCS31.
Any idea?
Thanks
Javier
Similar Messages
-
Delete dialog instance in rz20
Hello,
the dialog instances where automatically collected and monitor thru the central instance. Now I create a new dialog instanz and shut down an old one, but in the solution manager rz20 the old one already exist.
How can I delete the old and shut downed dialog instance?
ThanksThat doesn't work.
option 2 -> only a few minutes later the instance exist again under the MTE of the Solution Manager
try option 3 -> bad idea -> all nodes under all systems are deleted -> really scary but after a refresh they are already there
-> no solution -
How to Uninstall Dialog Instance in a Cluster Environment
Hello Guys,
I have installed my central server and one dialog instance on a windows cluster. But when i am trying to install a Dialog instance on a server I have given Node A profile directory instead of Global Profile path.
Now I am trying to uninstall my dialog instance on windows server I am not able to now. My installation also stuck and thrown a error in between. I would like to uninstall and reinstall DI instance on my 2003 windows server. Can some one help me how to do that ?
I am waiting for your help
Regards,
Sankar.G
BASIS CONSULTANTHi ,
Thanks my problem solved already..
Regards,
Sankar.G -
How to stop dialog instance without impact in the processes?
Hi experts,
I want stop and after delete my dialog instance.
My steps are:
- Stop de dialog instance
- Check the smlg and rz04 that the dialog instance disappear.
But, some jobs and some process type dialog, try to connect to my dialog instance stopped, why?
Thanks in advance,
Regards,Hi,
In trx sm61 i have the server of dialog instance.
What type of logs do you need? I have the logs in sm21:
12:55:01 RD USER S0T NiConnect Unsuccessful, Return Code: -0010
12:55:01 RD USER S0R > Host: hermes
12:55:01 RD USER S0S > Service: sapgw10
12:55:01 DIA 04 100 USER R49 Error de comunicación, cód.retorno CPI-C=020, cód.retorno SAP=236
12:55:01 DIA 04 100 USER R64 > Función CPI-C: CMINIT(SAP)
12:55:09 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
12:55:14 RD USER2 S0T NiConnect Unsuccessful, Return Code: -0010
12:55:14 RD USER2 S0R > Host: hermes
12:55:14 RD USER2 S0S > Service: sapgw10
12:55:14 DIA 07 100 USER2 R49 Error de comunicación, cód.retorno CPI-C=020, cód.retorno SAP=236
12:55:14 DIA 07 100 USER2 R64 > Función CPI-C: CMINIT(SAP)
12:55:19 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
12:55:29 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
12:55:39 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
12:55:49 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
Thanks in advance,
Regards, -
How does JAVA dialog instance gets synced from CI
Hello Guru's,
I have recently added two dialog instance to my Portal production.
I want to know what changes I have to make manually to all the dialog instances?
I had to manually change the JAVA parameters for all the dialog instances servers and add TREX nameserver.address.
We have Application integrator iView and for that we had turned off the Session Management Alerts (current mode = off), but for some reason I have to login to all the dialog instance and turn this off, I thought this is Instance independent?
Please help, what else should i be aware of?
Thanks in advance.
-KurienWas there ever any feedback to this. I would be interested in the same information, any tips/best practices for adding a java dialog instance.
-
How to install dialog instance?
hai
I installed sap 4.6c. I want to install additional application server (dialog instance) in another system. can u tell me the steps should i follow? Do i need to install oracle in that system?
with regards
venkateshHi,
As you said you want to install dilog instance in diffrent system means you have to install oracle client,,java.And we have to set the environment variables
Then run the setup.cmd u will get three options
central instance
database instance
dilog instance
select diloginstance and run the installation ,same like as central installation.
In dilog instance will ask the censtall instance instance number,database host name..etc.
If u start once you can do it.
i hope it will help you.
kiran kumar.v -
How to delete one instance of a repeating reminder
Let's say I have an appointment that repeats daily in Calendar. The appointment is visible every day in my calendar. If one day's appojntment is cancelled, I can delete that day's appointment and Calendar asks if I want to delete just the one or all future appointments. If I choose just the one, all future appointments are unaffected.
Let's assume the same scenario in Reminders. Here, however, I only see the reminder in the current day. If I look at tomorrow or subsequent day's reminders, it's not there. Once I check today's reminder as done, then tomorrow's appears. However, if I want to just delete today's reminder - but not tomorrow's or the next day's etc. - I can't. If I delete today's reminder, there is no dailogue asking if I want to delete just today's or all future reminders, Reminders just goes ahead and delete's the repeating reminder, doesn't create one for tomorrow, and all subsequent reminders are gone for all time.
So how do you delete just one instance of a repeating reminder, as you do for a repeating appointment?
Thanks in advance,
Steve = : ^ )Thanks again, but have you read the question?
I already have a reminder which repeats daily. The way Remidners does this is to show just today's event and, as you point out, when you check it off, Reminders creates tomorrow's event.
However, today's event – but not tomorrow's nor the next day's nor the next day's etc. – has been cancelled, and I want to delete today's event. However, when I delete today's event, Reminders doesn't create tomorrow's event, and the reminder and all it's subsequent iterations are gone. I wanted to delete just today's iteration of a repeating reminder but, in doing it, I deleted _all_ iterations. Do you understand?
Calendar behaves differently, and shows all iterations of repeating appointments and, when you delete one, it asks if you want to delete just that one or all future events. Reminders should do this, too, but it doesn't.
I hope this is clear, I don't know how else to explain it.
Steve = : ^ ) -
How to delete BPEL instances of deleted composits
Hi,
I need to delete or abort running instances of BPEL composite that is already deleted.
is this possible?
I'm running soa 11g (11.1.1.4)
Thanks,
RonenHi Roneng,
An optimal way to do this is by using the purging procedures on the SOAINFRA database.
Take a look at: http://docs.oracle.com/cd/E28280_01/admin.1111/e10226/soaadmin_partition.htm#CJHEBIBH
You can, for example, purge instances for a certain composite name and revision for a specific time period.
Cheers
Tiago -
Deleting database instances of previous Oracle Installations
How to delete database instances of previous Oracle Installations
I have Installed new instance of Oracle onto my server but on services window I can still see the older instances of oracle.
Apart from this I am unable to create database instance with same name as previous instance name.Search in the windows registy and delete all occurrence of Oracle
-
How to Uninstall Java Dialog Instance
Does anyone know how to uninstall a Java Dialog instance?
The install instructions, 'SAP Web Application Server 6.40 SR1 Java on Windows: MS SQL Server' suggest that I should go to the control panel and select the add/remove program and then find the instance and remove it. However, the instance does not appear in the list.
Note: I have the ABAP stack (DEV) and the java stack (JDV) installed on the same box. But, the java stack is not an add-in. The ABAP stack instance does appear in the add/remove program list.ok Doug,
i've a workaround for that.
Go to registry editor.IF YOU Find the Service corresponding to J03(SAP<SID>_03). Delete it. (if you want to be fail safe, export that contents to a file using FILE --> EXPORT and then delete it. you may import it later if you want). and RESTART the PC.
this process will ensure that there is no instance according to your system (coz no registry entry is found). it is as good as removed. but the files that were created during the instance installation will remain in your hard drive.
IN CASE you need this instance later or this workaround gives you any trouble, just import the registry contents file which you have exported earlier and RESTART THE PC.
it is as good as it was!!!
this is an easy work around but slightly risky as u are fiddling with your SYSTEM REGISTRY ENTRIES.
Regards
Arun.
PS: Remove the corresponding entry in the WINDOWS SERVICES file. otherwise, it will give PORT IN USE during later installation with instance number 03.
Message was edited by: Arunkumar -
How to delete the BPEL instance in Java code
Hi all,
How to delete the BPEL instance which I initiate in Java code?
Thanks
JaysonHi,
take a look here
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/toc.htm
Interface IInstanceHandle
void delete()
Delete the instance from the process domain. -
How to patch the sapjvm in either NW7.1 or NW7.3 in a dialog instance
Hi, all.
I only found the procedure to patch sapjvm 5.1 or 6.1 using JSPM. Actually SAP is saying only patching sapjvm with JSPM is supported. However, we all know that jspm cannot be started on a dialog instance. So how do you patch it on a dialog instance? I have spent the last 2 hours searching on the SDN and service marketplace and come up empty.
Note that you cannot manually copy the jvm directory either because the sapcpe will somehow pick up the executable in the older version and copy it into /usr/sap/SID/DXX/exe. Again, SAP manages to change something simple into 10 times more complicated and it is totally pointless.
Thanks,
Jonathan.Did you manage to get this working?
If yes ... what did you do?
I am having the same problem implementing commons-logging with log4j -
How to Install a Dialog Instance on NT server which CI is running on Unix
Dear expert:
Recently, we wanna add new dialog instance for our production system, but only one NT server can be used. Our SAP version is ECC6.0 SR3 and it's CI is running on HPUX 11.31. steps below:
1. I have configed the SAMBA with shared /sapmnt -> /usr/sap. Also from NT side this directory can be accessed.
2. I have add the <SID>adm and SAPService<SID> into SAMBA for access this directory with read and write rights.
3. I installed the DI on NT server with x86 master.(our NT is windows 2003 x64 SP2)
4. during the installation, the Master needs a directory named 'saploc' ( I think this should be only for NT with CI has this shared directory name, but no idea how to make this also in UX, so i create a new directory in UX named saploc and also share it). Is this normally?
5. At the end, the DI in NT can not be running normally..first is dispwork.exe can not running. After I change the rights for 'saploc' in ux, the dispwork is running but can not connected to message server.
6. I have updated the kernel for DI and make sure both the DI and CI has same version 236.
7. After that , the disp+work.exe can never been running anymore
8. I reboot the NT server try to fix this issue. but too bad! after reboot, I can not even start the DI from SAPMMC! with error 'permission deniedu2018..
My question:
1. do any one of yours has such experiences before? I mean install app server on different OS system.
2. Is that possible for SAP ECC6.0 SR3, since I know that lots of successful storys for 46C or 470
3. If it is possible.. how to ....
Hope yous can give me some suggestions!
Regards
EthernHi my friend
Did you check note 680617? Sorry I don't have hands on experience for this matter but I'm quite sure it's doable and fully supported.
Here's the checklist I can imagine:
1. release the /usr/sap directory as SAPMNT -- you already did and made sure it can be accessed from NT server
2. edit DEFAULT.PFL in the profile directory and add the parameter SAPGLOBALHOST to it -- you didn't indicate
3. have your target X86_64 kernel directory ready on CI HPUX host -- you didn't indicate but you did finish the DI install
4. use SAPPAD to edit DI profile
5. optional steps for oracle
Please let me know what progress you have there.
Thanks,
Effan -
How to install additional dialog instance on a separate host in unix?
Hi Friends,
We have BW 3.5/oracle on AIX. Any body can help me'how to install additional abap dialog instance on a seperate AIX host'?
Any help would be appreciated
Thanks,
MohanYou'll need to install a Dialog or Application server...
You can find the instructions on how to install an application server for BW at SAP MArketplace.
Go to https://websmp205.sap-ag.de/instguides -> SAP NetWeaver -> Release 04 -> Instalation -> SAP BW
Hope this help!
Juan Reyes -
How to install a dialog instance on AIX
hi,
i want to install dialog instance on AIX. But i dont know the procedure how to start. even i have searched the document in service market place, i could't find.
Does any body guide me regarding this issue.
SAP : 4.0B
R/3 Kernal: 4ob_com
DATABASE: Oracle 9.0.2.1
OS: AIX 5.2
Regards,
Narendra.Dear Narendra,
this is the Linux Forum you are posting. You may get help here, but I suggest that you open the question in the UNIX Forum ([SAP on UNIX|SAP on UNIX]) instead.
Thanks,
Hannes
Maybe you are looking for
-
Trying to add a HTML snippet but not working
i am trying to add an HTML code (from goole) to my iweb blog using the HTML snippet, but once I paste the code from google only an empty box appears instead of the button it is intended to create.. any ideas????? I am trying to add the google friends
-
Movie workflow advice... help!
Hi, I'm a Logic noobie and need to do this: I need to mix 2 stereo audio tracks together and then add them to a DV movie (replacing the preexisting audio on the movie). I figured I would bring both tracks into Logic, adjust relative volumes using tra
-
HT204408 Has anyone found a solution to this??
Seems like my issues are pretty common. Apple hasn't come up with a workaround?
-
Change "Default" location for chart legend
Hi, By default, when you create a chartthe legend appears to the right of the chart itself. As a company all of our legends are at the top. Is there anyway to set the default location to be top rather than right? Thanks
-
I own a version of Adobe Photoshop CS2. Sadly a little while ago my PC murdered itself with a Mother Board malfunction (or something of that nature) and the computer had to be tossed. Now that I have a new PC I'm trying to reinstall Photoshop but it