How to delete file from other system(LAN)

Hello folks,
Cud u plz help me out in finding code for deleting a file from other system i.e in LAN,assuming that the connection is already established to that system.

> Cud u plz
sigh
Please make the extra effort to write out words such as "could", "you", and "please". The extra keystrokes won't cost much in the way of time, and the enhanced clarity will be appreciated by those communicating on a forum with international readership. Also, it will give the appearance that you take your question seriously, which will in turn make your question look more interesting to answer.
Thanks!
~

Similar Messages

  • HOW TO DELETE FILES FROM ADOBE READER IF THEY ARE UNNECESSARY

    HOW TO DELETE FILES FROM ADOBE READER IF THEY ARE UNNECESSARY

    Hi,
    You might need to sign up at https://cloud.acrobat.com/ and choose 'Files' tab where you can find all the files.
    Select all the files you want to remove and choose 'Delete' option.
    Regards,
    Anubha

  • How to backup files from other user logged in as administrator

    RE: How to backup files from other user logged in as administrator AND/OR how to repair drive with "Invalid catalog PEOF"
    Hello,
    My MacBook Pro computer’s hard drive is not booting.
    I booted with the base operating system and ran Disk utilities and I got the following messages:
        Invalid catalog PEOF
        The volume could not be verified completely.
        This disk needs to be repaired.
        Disk utility can’t repair this disk. Backup as many files as possible, reformat the disk,
        and restore your backed-up files.
    The problem is that I have a couple of USERS set up on this computer, and it won’t let me backup the files of the second user.  The folders are locked and I can’t access them, even though I am logged in as the administrator.
    I made a boot disk on my other computer ( a MacPro Early 2008 ) desktop computer with the DiskWarrior 4.4 updater,
    but it won’t boot on my MacBook Pro.
    How can I backup these user files so that I can copy them back once I fix the drive?
    or better yet,  How can I repair the Invalid catalog PEOF on this drive?
    Thank you in advance for your time! 
    Bill
    THIS IS THE COMPUTER
    ================
    17” MacBook Pro 2.8GHZ 4GB Ram (purchased in 2009).
    Model: A1297
    Running Mac OSX 10.9.5

    Try using Disk Utility/Restore to copy the backup to a new location. Please note that this will reformat the destination partition which will erase all data.
    Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • How to delete files from start up disk

    Please help. After my macbook air is on for 2-5 mins, it comes up with I need to delete files from my start up disk. I went into start up disk and the only thing in there is the OS X system. So, then a small box appears. and tells me my memory is full and that I need to force quit applications. Sometimes the only application that is on it is finder. At this point the macbook air then freezes and I have to turn it off holding the button down. When I go to turn it back on it will often not turn back on. This laptop is only 11months old and running the new OS X system (mountain Lion) that just came out.

    Use Grandperspective to visually map all files:
    http://www.macupdate.com/app/mac/19515/grandperspective
    Also check this page about clearing drop box cache on your Mac:
    https://www.dropbox.com/help/328/en

  • HOw to delete files from remote server?

    Hi,
    I want to delete files from a directory on remote server.
    I use the following command to delete on current server:
    find $srcdir -mtime +90 -name "COR*.txt" -exec rm -f {} \;
    Now, how can I delete files from remote server ?
    Thanks!
    Yogini

    Some possible options:
    1. There exists SSH implementation for Windows.
    2. You can make a workaround. You can setup share for specific/wanted directory.
    Then you can mount it on Linux machine and execute command localy and delete files "localy" in mounted directory.
    3. You can setup FTP server on Windows machine and do that remotely via FTP commands.

  • How to delete file from Window server

    Hi
    Can anybody tell me that Is there any function module for deleting file from presentation server like C directory.
    Quick suggestion will highly be appreciated!!!!!!!

    Try this:
    CALL METHOD cl_gui_frontend_services=>file_delete
      EXPORTING
        filename             =
      changing
        rc                   =
    EXCEPTIONS
       FILE_DELETE_FAILED   = 1
       CNTL_ERROR           = 2
       ERROR_NO_GUI         = 3
       FILE_NOT_FOUND       = 4
       ACCESS_DENIED        = 5
       UNKNOWN_ERROR        = 6
       NOT_SUPPORTED_BY_GUI = 7
       WRONG_PARAMETER      = 8
       others               = 9
    this is pretty gud approach .
    Message was edited by:
            Nishant Rustagi

  • How to delete files from an attached camera after downloading?

    New to Aperture 2. I am sure to have a lot of exploring to do but for now I am looking for a way to delete files from an attached camera after downloading like you can with iPhoto. Is this possible?

    While I might be a bit paranoid, I prefer to format in the camera after verifying that the import came out OK. It is a small price to pay to make sure that my images are actually on the computer. I don't do anything fancy, just make sure that the thumbnails come up correctly, and maybe perform an edit.
    While it was not my images, thank goodness, I did get bit in a similar fashion. I use a "watch fob" style GPS unit for Geocoding. I have hoodahgeo configured to delete my tracks after import. Well, after one session I forgot to update my images with the gps information. As you can guess, when I re-opened HoodahGeo to try and re-geotag, the tracks were gone, so I was out of luck.

  • How to move files from  one  system  to another in plsql

    Hi all,
    I want to move file from one system to another using plsql procedure .
    Kindly let me know what package i have to use for doing this .
    Thanks,
    P Prakash
    Edited by: prakash on Jul 27, 2011 2:20 AM
    Edited by: prakash on Jul 27, 2011 2:59 AM

    BluShadow wrote:
    That's ok if you want to diet. ;)Ooh look, the strange punctuation is back. Can it be true that the forum software has caught up with the '80s?
    I almost feel like connecting to the internet using a 9600 baud modem to celebrate.
    http://upload.wikimedia.org/wikipedia/commons/5/5d/TeleGuide-terminal.jpg
    Colon dash right bracket.
    (Old habits die hard)

  • How to delete file from column after upload with messageFileUpload?

    Which is the way to delete a file from column i have uploaded with messageFileUpload. After uploading the system generates a link to download the file. But how i can delete the file?

    Thank you! Syncing has always scared me...basically I am just afraid to lose any photos. But it worked. Again thank you

  • How to delete files from external ntfs hard disk [Solved]

    Hi guys
    first, sorry for my bad English.
    I have an external hard disk ( WD 500GB ) with ntfs file system and i have installed ntfs-3g package.
    3 days ago, when i wanted to delete some files, i get a problem with it,
    look the output :
    [jahangir@Arch New Metal]$ sudo rm *
    [sudo] password for jahangir:
    rm: cannot remove '02 - Korn - Love and Meth.mp3': No such file or directory
    rm: cannot remove '30Seconds To Mars': No such file or directory
    rm: cannot remove '30Seconds To Mars 1': Is a directory
    rm: cannot remove 'Avantasia': No such file or directory
    rm: cannot remove 'Avantasia 1': Is a directory
    rm: cannot remove 'Avantasia 2': Is a directory
    rm: cannot remove 'Behemoth': No such file or directory
    rm: cannot remove 'Behemoth 1': Is a directory
    rm: cannot remove 'Hanging Garden - At Every Door - 2013': No such file or directory
    rm: cannot remove 'Hanging Garden - At Every Door - 2014': No such file or directory
    rm: cannot remove 'Rosetta': No such file or directory
    rm: cannot remove 'Rosetta 1': No such file or directory
    rm: cannot remove 'Sepultura': No such file or directory
    rm: cannot remove 'Sepultura 1': No such file or directory
    rm: cannot remove 'Slipknot': No such file or directory
    rm: cannot remove 'Slipknot 1': No such file or directory
    rm: cannot remove 'Tokio Hotel': No such file or directory
    rm: cannot remove 'Tokio Hotel 1': No such file or directory
    rm: cannot remove 'T\303\275r': No such file or directory
    rm: cannot remove 'neww': No such file or directory
    [jahangir@Arch New Metal]$
    Who can help me ?
    I wanted to delete .trash-1000 file from my main directory hard dist and i confront with this error :
    [jahangir@Arch My Passport]$ sudo rm .Trash-1000
    [sudo] password for jahangir:
    rm: cannot remove '.Trash-1000': No such file or directory
    [jahangir@Arch My Passport]$
    In the event that it is there.
    also in main directory of my hard disk i have 1 mp3 file that i can't view it in file manager and it will be displayed in Windows OS and with ls command in terminal :
    [jahangir@Arch My Passport]$ ls
    ls: cannot access 01 - Lost.mp3: No such file or directory
    ls: cannot access 02 - Surrendered To The Decadence.mp3: No such file or directory
    01 - Lost.mp3 In The Name Of God Videos ZzZ - IMAN winold
    02 - Surrendered To The Decadence.mp3 New Metal World of Warcraft Cataclysm 4.3.4 enGB navid wow wrath
    [jahangir@Arch My Passport]$
    what is this file and how can i delete .Trash-1000 and this files and content of "New Metal" directory ?
    Last edited by jiros (2013-12-23 20:57:05)

    I believe you used ntfs for a reason. As far as I know, Windows isn't friendly with hdd filesystems others than fat or ntfs, so once you format your external harddrive to ext4, windows won't talk to it at all, unless you install some additional driver or software.
    You have several possibilities to do:
    1) You could use FAT32, it's kind of a dumb filesystem, linux, mac and windows can read and write to it, there are some limitations like file permisions or 4GB file size limit.
    2) You could make multiple partitions on your external harddrive, one with ntfs (for windows) and the other with some fs that is support natively in Linux and Mac, I believe only option would be HFS+. I'm not an expert, maybe somebody will correct me. Anyway, if you aren't going to connect your disk to Mac, than ext4 would be a good choice. But this approach with two different partions is kind of dumb, because usually you need the same data available on whatever platform.
    3) If I were you, I would continue using NTFS or FAT32. It's not ideal, but it's a price you have to pay for dealing with Windows systems.
    4) If there is any other smarter solution, I believe somebody will add it to responses bellow.
    Anyway, it's weird that your problem persists. There has to be something wrong with your filesystem, otherwise ls wouldn't show you question marks in its output. Did you perform chkdisk via GUI? It has to say that either there wasn't any error with your fs, or that there was some error. We live (unfortunatelly) in binary computer world. I mean you can perform that command from shell, or however microsoft calls it, and if you run it in a proper configuration, it will tell you whether your fs is bad or not and perform needed repairs.
    And how to format disk to ext4?
    Backup your data, run as root fdisk /dev/yourexthdd (fdisk /dev/sdd), delete all partitions, create new ones, once you are done, write changes down. fdisk is pretty easy to use, don't be afraid of it. Then you have to create filesystem on each partition you created with fdisk, so if you created only one, run mkfs.ext4 /dev/yourexthddwithpartnumber (mkfs.ext4 /dev/sdd1). There are nice articles about doing these things on Arch Wiki (https://wiki.archlinux.org/index.php/File_Systems), don't be worried to read them

  • How to delete file from client machine

    Hi all,
    we are using the DataBase: oracle:10g,
    and forms/reports 10g(developer suite 10g-10.1.2.2).
    can anybody help me how to delete the file from client machine in specified location using webutil or any
    (i tried with webutil_host & client_host but it is working for application server only)
    thank you.

    hi
    check this not tested.
    PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
    IS
    -- Open a stored document --
    LC$Cmd Varchar2(1280) ;
    LC$Nom Varchar2(1000) ;
    LC$Fic Varchar2(1280);
    LC$Path Varchar2(1280);
    LC$Sep Varchar2(1) ;
    LN$But Pls_Integer ;
    LB$Ok Boolean ;
    -- Current Process ID --
    ret WEBUTIL_HOST.PROCESS_ID ;
    V_FICHERO VARCHAR2(500);
    COMILLA VARCHAR2(4) := '''';
    BOTON NUMBER;
    MODO VARCHAR2(50);
    URL VARCHAR2(500);
    Begin
    V_FICHERO := V_ID_DOC;
    LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
    LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
    --LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
    LC$Path := 'C:';
    LC$Fic := LC$Path || LC$Sep || LC$Nom ;
    If Not webutil_file_transfer.DB_To_Client
    LC$Fic,
    'TABLE_NAME',
    'ITEM_NAME',
    'WHERE'
    ) Then
    Raise Form_trigger_Failure ;
    End if ;
    LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
    Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
    LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
    If LN$But 0 Then
    Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
    Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
    LN$But := Show_Alert( 'ALER_STOP_1' ) ;
    LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
    Raise Form_Trigger_Failure ;
    End if ;
    If Not webutil_file_transfer.Client_To_DB
    LC$Fic,
    'TABLE_NAME',
    'ITEM_NAME',
    'WHERE'
    ) Then
    NULL;
    Else
    Commit ;
    End if ;
    LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
    Exception
    When Form_Trigger_Failure Then
    Raise ;
    End ;sarah

  • How to delete file from application server(Unix)

    Hi All,
    Using the below code downloading a file from application server(Unix) to client machine. I want to delete the file from application server once it is downloaded to client
    We work on Forms 11.1.1.4.0 and Oracle DB 10g. Client machine are Windows 7.
    BEGIN
      IF webutil_file_transfer.AS_to_Client
      (clientFile => Name_In('global.g_file_name')
      ,serverFile => ls_AppServer_Loc)THEN
      message('Data exported Successfully');
      ELSE
       message('File download from Application Server failed');
      END IF;
    EXCEPTION
      WHEN OTHERS THEN
      message('File download failed: '||SUBSTR(sqlerrm,1,200));
      END;
    I have search for solution on OTN. Few suggested to use HOST.
    Can any one help me how to use Host() built_in to delete the file.
    Thanks,
    Maddy

    Can any one help me how to use Host() built_in to delete the file.
    Host('/bin/rm <complete file path>');

  • How to delete files from time machine volume

    Before selling my old MacBook Pro, I had backed up all my data on to an external WD hard drive using Time Machine. I had since switched to a desktop but since I did not have any need for the MacBook Pro files at the time, I had put aside that WD hard drive. Recently, I wanted to clear some space on that external drive to make way for some of my present files. I drilled down in to Backups.backupdb and tried to delete files, but was met with the error "
    An error occurred.The operation couldn’t be completed. (OSStatus error -5000.) Insufficient access privileges for operation".
    It did prompt me for a username and password before showing that message. I tried both my current user/pass as well as (what I remember to be) my old user/pass on the MacBook Pro. Both presented me with the same error message.
    I also did try to mount the drive as Time Machine on my present system, and then try to enter Time Machine and delete it from there. However, clicking on "Enter Time Machine ... " does nothing.
    Any ideas?

    Hi Linc,
    my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
    When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD.  February 7th  2014 was the date of the clean install.
    These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
    Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
    Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
    I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
    Sigi

  • How to delete  File from the Application Server,ABAP

    Hi Gurus,
    I'm using  DELETE  DATASET  Statement ,
    Based on Date  how can i delete files with in the period in the Application server
    Any BAPI/FM  for this Delete file based  on some Date Period
    Thanks in Advance.

    DATA: BEGIN OF file,
            dirname(75) TYPE c, " name of directory. (possibly truncated.)
            name(75)    TYPE c, " name of entry. (possibly truncated.)
            type(10)    TYPE c,            " type of entry.
            len(8)      TYPE p,            " length in bytes.
            owner(8)    TYPE c,            " owner of the entry.
            mtime(6)    TYPE p, " last modification date, seconds since 1970
            mode(9)     TYPE c, " like "rwx-r-x--x": protection mode.
            useable(1)  TYPE c,
            subrc(4)    TYPE c,
            errno(3)    TYPE c,
            errmsg(40)  TYPE c,
            mod_date    TYPE d,
            mod_time(8) TYPE c,            " hh:mm:ss
            seen(1)     TYPE c,
            changed(1)  TYPE c,
          END OF file.
    DATA: BEGIN OF file_list OCCURS 100,
            dirname(75) TYPE c, " name of directory. (possibly truncated.)
            name(75)    TYPE c, " name of entry. (possibly truncated.)
            type(10)    TYPE c,            " type of entry.
            len(8)      TYPE p,            " length in bytes.
            owner(8)    TYPE c,            " owner of the entry.
            mtime(6)    TYPE p, " last modification date, seconds since 1970
            mode(9)     TYPE c, " like "rwx-r-x--x": protection mode.
            useable(1)  TYPE c,
            subrc(4)    TYPE c,
            errno(3)    TYPE c,
            errmsg(40)  TYPE c,
            mod_date    TYPE d,
            mod_time(8) TYPE c,            " hh:mm:ss
            seen(1)     TYPE c,
            changed(1)  TYPE c,
          END OF file_list.
      DO.
        CLEAR file.                           
        CALL 'C_DIR_READ_NEXT'
          ID 'TYPE'   FIELD file-type
          ID 'NAME'   FIELD file-name
          ID 'LEN'    FIELD file-len
          ID 'OWNER'  FIELD file-owner
          ID 'MTIME'  FIELD file-mtime
          ID 'MODE'   FIELD file-mode
          ID 'ERRNO'  FIELD file-errno
          ID 'ERRMSG' FIELD file-errmsg.
       if sy-subrc eq 0.
          MOVE-CORRESPONDING file TO file_list.
          APPEND file_list.
       else.
          exit.
       endif.
    enddo.
    sort file_list based on date and time ie, MOD_DATE and MOD_TIME fields
    and delete the entries

  • How to delete files from JAR ?

    Hi,
    Is there any way to delete a file from the jar ?
    I just want to delete some class files from the jar without deleting and again uploading the JAR.
    Thanks & Regards,
    Atur Shah

    You can automate this using the following example:
    echo Remove xalan from runtime
    echo .
    echo JAVA_HOME: %JAVA_HOME%
    echo .
    rmdir /s /q %TEMP%\rt
    mkdir %TEMP%\rt
    pushd %TEMP%\rt
    %JAVA_HOME%\bin\jar -xf %JAVA_HOME%\jre\lib\rt.jar
    rmdir /s /q org\apache\xml
    rmdir /s /q org\apache\xalan
    rmdir /s /q org\apache\xpath
    %JAVA_HOME%\bin\jar -cf ..\rt.jar *
    copy %JAVA_HOME%\jre\lib\rt.jar %JAVA_HOME%\jre\lib\rt.jar.old
    copy ..\rt.jar %JAVA_HOME%\jre\lib\
    popd

Maybe you are looking for