How to delete ICAL calander entries

Hi,
I have subscribed to some links but now i want to delete them from my iphone calander. Can anyone help me with the steps to follow so that i can delete all redundant ICAL entries in my Iphone cal.

Hi,
For the sake of completeness;
Solution: Direct call to Web Service using the Web Service Navigator:
1)     Call http(s)://<host>:<port>/wsnavigator
2)     Click on u201CProvider Systemu201D, then u201CSearchu201D, then in the table u201CDIConfigurationServiceViu201D:
3)     Click on u201CNextu201D, then u201CdeleteDISystemu201D
4)     Click on u201CNextu201D, then remove all u201CSkipu201D ticks,  set certificate to u201CanySimpleTypeu201D, u201Cpasswordu201D to the password of the system, u201Cuser Nameu201D to the user, u201CsystemIDu201D to the name of the development configuration:
5)     Click on u201CNextu201D. The development configuration should now be gone.
Thanks
Kenny

Similar Messages

  • How to delete the total entries in ztable

    Hi ,
    How to delete the total entries in ztable...
    code pls.
    regards,

    Hi Venkat,
    pls see below records,
    Plant  Material                       Alternate material
    3770  00000000000126875          2020202
    3770  000000000005999335        2020202
    3770  117196                           2020202
    3780  00000000000126875           2020202
    3784  00000000000126875         2020202
    3784  000000000002809336       2020202
    3784  000000000005999335        2 020202
    3789  00000000000126875            2020202
    if  i write below syntax ,
    delete from ztable where matkl = '2020202'.
    all records contains  matkl = '2020202' will be deleted ??
    pls. reply.

  • How to delete duplicate contact entries in iCloud?

    Dear Members,
    I am searching for a way to delete multiple duplicate entries in my iCloud accound.  I have been unable to find a solution to this except to manually delete each one individually, one-at-a-time.  Any help would be greatly appreciated.
    Also, if there happens to be of a way to delete all of my contacts and start from scratch, I would like to know a solution for this as well.
    Thank you in advance for your time.  Anyone that can point me in the right direction or provide me with a solution, I will be very grateful.
    Regards,
    fivanaj

    Thanks for the suggestion, Barney-15E. FYI I am not running both iCal and Calendar. Just Calendar. Me bad for using the old name and new name interchangeably.
    Tackling the iMac problem: In iCloud network preferences, I unchecked Safari then soon after rechecked it, and your suggestion appears to have worked: a bookmark recently added on one of the other devices appeared in the iMac Safari bookmarks. So far so good.
    Did the same thing with contacts. The iMac took a couple of hours to restore the sync setting, but it finally completed the task. The computer was laboring so I rebooted. Then I opened the contacts application and saw the spinning grey bars next to the "iCloud" heading above my list of contact groups. Some time later the spinning lines were replaced by an exclamation point. I clicked on it and got the message that the operation could not be completed because of a "CoreDAVErrorDomain error 1..". Subsequently, after much spinning of the line wheel, I have gotten either the exclamation point with the CoreDAV message or a lightning bolt icon. Whether exclamation point or lightning bolt, clicking on it provokes a long period of the spinning line wheel. And looking at some telltale contact discrepancies between the iMac and the other machines, nothing seems to have changed in terms of merging the discrepancies.
    Searching for the error message in the support community, I see this has happened to others, and they have had some success in following a list of steps starting with archiving the contacts, which I have done. Don't think I fully follow the other steps, nor am I sure they apply to my situation.

  • How to delete a single entry from GUI History

    All,
    I want to delete a single line of GUI history.
    This is my scenario.  During the installation of SAPGui in the user system , we usually send the preconfigured MDB files also along with distribution. But by mistake i tyoed the administrator password in the user name of the login screen it gotupdated in the master MDB file . Now i wanted to delete the only that particular entry from GUI History.
    PS I donot want to delete the entire MDB file and recreate again.
    Any Info?
    a®s
    Edited by: a®s on Jul 7, 2009 10:56 AM

    Hi,
    It is very simple....
    Here is how you can delete a particular entry from GUI History
    1. Open the login screen.
    2. Place cursor in "User Name" input field
    3. Press spacebar on your keyboard. - This will show all entries from history
    4. Scroll & highlight the entry you wish to delete using arrow keys on keyboard (Do not hit enter, just scroll....leave all entries visible)
    5. Hit "Delete" button on your keyboard.
    Hope this helps.
    Regards,
    -Abhijit

  • How to delete the Red Entries of EWA

    Hello All,
    I have some red entries of EWA which had failed during initial Setup of EWA. Now, everything is fine. How to delete those entries from Solution Monitoring-> EWA ->Operations page. It islooking messy

    Hi,
    You can delete the EWA sesision reports as per below
    On EWA screen ...Go to Menu
    GO TO >Sessions>Re-Oraganise-->Select required entries
    Execute and choose which all entries you want to delete.
    Regards,

  • How to delete Development Configuration entries

    I have used document "How To... Setup CM Services" to configure NWDI with CTS+ for a Portal environment.
    My STMS configuration in the CTS+ server looks like this:
    EPU -> EPD -> EPQ -> EPP
    EPU = Upload System
    EPD = Development
    EPQ = Quality
    EPP = Production
    Everything was going ok but by mistake I created the upload system in the CTS+ environment with the option "Create development configuration" and this generated an entry in the Development Configuration of the NWDI which I am not able to erase because the delete option is not active. I have tried to fix it by deleting the system EPU in the STMS of my CTS+ server but even though I no longer see the system in STMS I still see it in the NWDI.
    How can I delete Development Configuration entries? Any help will be appreciated.
    Regards,
    Ayax
    Edited by: Ayax Morales S?chez on Sep 8, 2010 12:28 AM

    Hi,
    For the sake of completeness;
    Solution: Direct call to Web Service using the Web Service Navigator:
    1)     Call http(s)://<host>:<port>/wsnavigator
    2)     Click on u201CProvider Systemu201D, then u201CSearchu201D, then in the table u201CDIConfigurationServiceViu201D:
    3)     Click on u201CNextu201D, then u201CdeleteDISystemu201D
    4)     Click on u201CNextu201D, then remove all u201CSkipu201D ticks,  set certificate to u201CanySimpleTypeu201D, u201Cpasswordu201D to the password of the system, u201Cuser Nameu201D to the user, u201CsystemIDu201D to the name of the development configuration:
    5)     Click on u201CNextu201D. The development configuration should now be gone.
    Thanks
    Kenny

  • How to delete double calendar entries

    I have double calendar entries on my iphone.  How do I delete these double entries?

    I have the same problem. Now the entries are not just double, I have them four times. It looks like it is just about the full day events like birthdays. I think it is may be caused by my previous phone. All the double entries are old ones. I had an "HTC touch cruise" (totally crap) and transferred all my data to outlook an then to my iPhone. All the entries are marked with four different colors and it tells me that I have a lot of different calanders. But I have never created them.
    Please, can anyone help? Imagine you have a day when three friends have birthday, my phone will send me 12 notification. :-(

  • Tcode AL11 - How do delete a direcrory entry?

    In Tcode AL11 there is no option to delete a directory entry, only an option for configure.

    If you go and click configure just select the user-defined directory to delete and click on "delete"
    SAP Standard directories cannot be removed (as far as im aware)
    Regards
    Juan

  • How to delete duplicate calendar entries on N8?

     Hi,
    I recently added a .ics file to add some calendar entries into my N8 calendar. But somehow the same calendar file was added multiple times and now I have 5 duplicate calendar entries for each day.
    Is there a way to delete these calendar entries without deleting my old calendar entries? The .ics file was a fixture list of a club and has a lot of entries so deleting them one entry by entry is not an option. 
    Thanks,
    Nakul

    Normally the fastest and easiest solution is:
    Go to calendar/ Calendars Menu/  Hide or Delete any calendars that you can see (leave Personal or any you use the most)
    It did the job for me.

  • How To Delete Alarm List Entries

    I've got four entries in my alarm list (email addresses, all the same) with notifications in minutes. How do I delete this list?

    ManiacalMike,
    That information is stored in the com.apple.iCal.plist file which is located in your Macintosh HD/Users/yourusername/Library/Preferences folder.
    You can quit iCal, move this file to your Desktop, and then log out/in or restart. Open iCal, and the entries should be gone. If you are unsatisfied with the results, just quit iCal, return the original plist file to the preference folder and allow it to replace the newer plist.
    If you are satisfied with the results you can trash the plist file on your Desktop.
    ;~)

  • How to delete iCal Completely

    Hi
    I asked this a few weeks ago and got a few suggestions that were not useful so I'll repost the question
    iCal has begun losing entries within minutes of entering them and quitting the program. I created a new user and entered events and it seemed to work fine. The only suggestion I don't want to hear is:
    delete all entries> delete program files AND reenter the thousands of events manually that I have entered since iCal came out in 10.1.
    This is my business appointments and I have to keep these as a record.
    The setup is a G5 dual 2ghz.
    Has anyone had a recurring problem of the database getting corrupted?
    Thanks
    Enio

    Enio,
    Up to 10.5.7
    How many of those computers are you syncing with MobileMe?
    I hesitate to offer this suggestion, especially if you are trying to sync multiple computers with multiple operating systems. I am hesitant since MobileMe Chat was apparently unable to solve your problem, and I simply offer it as food for thought.
    Before you do anything else be sure to identify/designate one of your computers as the "Master" computer. To me that means determining which computer has the most current up-to-date information. Protect the information on that computer by having a sufficient backup of your synced data. I will take it for granted that you know how to do that. Make sure that you use (at a minimum) iCal>File>Back up iCal...
    After you have backed up, create a new calendar, and name the calendar "Test" for example. Then delete all of the other calendars that exist in the "Calendars" sources pane.
    Quit iCal, and remove the com.apple.ical.plist file from your Macintosh HD/Users/yourusername/Library/Preferences folder. Also remove the Calendar Cache file from the Macintosh HD/Users/yourusername/Library/Calendars folder.
    Turn off MobileMe sync.
    Then log out/in or restart, and the only calendar remaining should be the blank "Test" calendar.
    Next, use MobileMe: How to reset sync data to reset your sync data to "zero" out the information on MobileMe.
    When MobileMe has been updated and displays only the "Test" calendar, use iCal>File>Restore iCal... from your backup.
    Good Luck.
    ;~)

  • How to delete the NULL entries in nest table

    Hi,
    After I used a loop and open/fetch cursor populated the object table
    I found there are random NULL entries in my object table (nest table)
    The data look like this
    NULL NULL           NULL
    NULL NULL           NULL
    123     03-MAY-04     ACTIVE
    NULL NULL           NULL
    NULL NULL           NULL
    234     21-MAY-04     ACTIVE
    NULL NULL           NULL
    345     11-MAY-04     ACTIVE
    NULL NULL           NULL
    How can I get rid of those NULL entries in my nest table? So it can become
    123     03-MAY-04     ACTIVE
    234     21-MAY-04     ACTIVE
    345     11-MAY-04     ACTIVE
    Additional info:
    create type myType as object
    (id NUMBER (10,0),
    eff_date date,
    status VARCHAR2(17)
    create type myNestTab as table of myType;
    I have tried Delete procedure in following two ways.
    Version 1:
    FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
    LOOP
    IF l_my_nest_tab(i).id IS NULL THEN
    l_curr_event_tb.DELETE(i);
                   END IF;                         
    END LOOP;
    Version 2:
    FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
    LOOP
    IF l_my_nest_tab(i) IS NULL THEN
    l_curr_event_tb.DELETE(i);
                   END IF;                         
    END LOOP;
    Both of them give me the error “no data found.” And only left me the first NOT NULL entry in the table.
    123     03-MAY-04     ACTIVE
    Thanks in avdance.

    Hi Vishnu,
    u can write a report program for this and in that use the event  :
    AT NEW <field-name> ( use primary key)
    your statements
    ENDAT
    for eg.
    loop at itab ( herfe itab must be of type of table for which u want to track new entries)
    at new matnr
    write:/ new record
    endat
    endloop.
    schedule this report in background to run in every 5 or 10 mins as per your requirement and hence changes can be tracked.
    regards
    Vinod

  • How to delete the unwanted entries directly from the UWL of MSS

    Hi experts
    I see an unwanted item stuck in WL of approver but not in his
    inbox how can i delete this entry form UWL,ihave tried refreshing UWL but the problem still persists please explain.
    when trying in the dev system
    *I actually applied leave from a test user
    his manager is able to view this workitem in his inbox
    then went into the background SAP and manually completed the workflow
    now if i go to the managers inbox i dont see it there
    but i still see it in UWL
    Could there be any reason for this,Please advice*
    Thanks in advance for your anticipated cooperation

    Hello,
    It is not easily possible to delete the workitems from UWL in MSS except using Batch program in backend ECC.
    Check again in the ECC, the workflow is got trigered and there is surely workitem in the manager's SAP Inbox. Check the tcode swia, enter the workflow task number and the workflow is got triggerred.
    Use swi5 tcode to see the Completed Workitems and to be completed workitems for that Employe (manager).
    The other reason could be.....somebody might hv executed this wf item, but still lying in UWL lists in  MSS.
    Try to re-register the system using UWL Wokflow Administrator in System Administration.
    Hope this helps.
    Regards,
    Anil Kumar.

  • How to delete a blog entry in Lion Server Wiki?

    Anyone know how to do this?  It seems that even logged in as system administrator you cannot delete blog entries using the web interface. 
    Wiki help unhelpfully reports that "If Delete Page or Delete File isn't listed, you can't delete the page or file.".  Really?
    Thanks in advance for any help avail.

    The above works most of the time, but sometimes User accounts can be stubborn.  I setup an admin account, perhaps unecessarily, when installing lion on a new solid state hard drive.  After migrating my original Admin account over from the hard drive I had difficulty in removing the newly created Admin (method: I clicked the minus and deleted the home folder, checking 'erase home folder securely') which resulted in the acct. being downgraded to Standard.  Still it would show up at startup login screen.  Although logging in to this account (to attempt to logout and then reattempt the delete) was not possible (never ending spinning beachball - not what you want with 20G RAM and a top end SSD).
    Then I found this -
    http://reviews.cnet.com/8301-13727_7-57326230-263/remove-stubborn-user-accounts- with-directory-utility/
    - which could be helpful if you are having similar problems with user accounts in Lion.

  • How to Delete permanently an entry from an Infoobject - Master Data

    Hi All,
    I want to delete a entry = 014 in Infoobject = data provider since it is no more needed. **
    When I go to this Infoobject-> Maintain master data anddelete it, a message Pop’s up
    When I Check using Tcode  SLG1, I see
    When I check in SID table of the Infoobject, I see below.
    How do I delete it? Please help.
    **I need to delete it since we no more required this and we have created a new data provider (286) instead of this and the old one still appears in the reports :| with no data.

    Hi,
    fallow the below steps while delete the master data.
    RSA1 --> find your Info object --> right click --> maintain master data
    Select rows you want to delete and click 'Delete' icon. Then SAVE.
    If system prompt you message "some master data cannot be deleted"
    Then goto tcode SLG1 --> enter Object: RSDMD and Subobject: MD_DEL and User: your userID and press F8.
    In the next screen Expand node and double click 'Problem class additional information'
    This will give you which ever objects using SIDs of this master data.
    You should delete this SID according to that list.
    find the below doc.
    http://scn.sap.com/docs/DOC-39857  
    Thanks,
    Phani.

Maybe you are looking for