HOW TO DELETE INFOSET QUERY
HI ALL,
I created zqm infoset and using 3 tables. now i want to delete 1 teble from them.
when i am deleting it getiing mess.
"" Field QAVE-PRUEFLOS is used in queries
Message no. AQ606
Diagnosis
You attempted to delete a field used in queries from the functional area.
Procedure
Before deleting a field from the functional area, you must ensure that the field is not used in any queries. Select Environment -> Directories -> All queries to display a list of queries which use this field. Either modify the queries so that the field is no longer used or delete the queries altogether. Then, you can delete the field from the functional area. ""
i can see query group and query.
how to delete these query.??????
Hi,
Try to use Note 781193 - SAP Query: Remove field from InfoSet => AQ606.
We have solved our issue with deleting fields in tables.
With best regards,
Kamila.
Similar Messages
-
How to delete Infoset Query in R/3
Hi Gurus,
I created a Infoset using SQ02 in R/3 and generated the query. Now I need to delete that Infoset query. Please advice me how to delete infoset query from the functional group in R/3.
Thanks
LizaHi,
In SQ01 ,press shift+F7 then find your user group. then from infoset query tab ,select ur infoset.
and try to delete , I think, it should work.
Regards
CSM Reddy -
How to delete a query in Quality System
Hi,
I would like to delete a ZZ query in Quality sytem directly. I don't have AUTHORIZATION delete using Tcode RSZDELETE. As this particulate query not avaiable in Development system, we can create a transport also.
Is there a way to delete directly in Quality System ?
Advance Thanks,
RathinakumarHi,
If you do not have the authorization then#
goto the BEX (rrmx) and delete the query from there.
you can delete RSZDELETE or delete the entries in RSZCOMPDIR table by giving ur query as parameter.
also, check this thread:
how to delete a trasonported query?
hope it helps.
Regards, -
How To Delete Multiple Query Elements in a Transport
Guys,
How do you delete Multiple Query Elements in a transport in DEV? Or it's not posible. I tried to select multiple but only one is being deleted.
Thanks,
ReccaHi Recca,
As Nanda said, just go to tcode SE03..Click Unlock Objects (Expert Tool)..Paste your TR number (one at a time) then click Unlock..
Go back to SE10 and delete your TR numbers..
Regards,
Loed -
How to delete a query from transport.
I have created 5 queries and added to a transport request, now I don't want to transport one query, how to delete it from transport request?
ThanksHi,
There you search for the query and delete that only.
Or just double click on the request in which you want to delete.It will shows as Display request, There find out the request with technical name, select it and choose cut, save the request.
it will delete the request.
Hope it helps you.
Let us know if you still have any issues.
Reg
Pra -
How to transport infoset query to Production serveR?
when i transport everything is transported to production server. when i run the transaction in production server it shows me the error saying . PROGRAM Does not exist .. how to resolve this..
can any one help me to transport my infoset query from step-to-step.
Regards
Saad NisarWell there is no button as such.
I hope you must have found the Transport button.
When you click it, it gives selection screen there you can find the redio buttons.
Export will create a transport request and Download will download it to local machine.
Let me know if it doesn't work. But you have to do more analysis as to how to go this way.
Regards
Shital -
How to debug Infoset Query in ABAP?
Hi
I have an Infoset Query created by another user, please let me know how to debug this?
Thanks
NagaNagarani - For debugging a infoset query, you have to create a query in SQ01 for the infoset which you are planning to debug. Once the query in transaction SQ01 is generated, Activate the same. Use the following path to generate program for created query from SQ01 QUERY--> MORE FUNCTIONS > GENERATE PROGRAM. Once the program is generated use the path QUERY>MORE FUNCTIONS --> DISPLAY REPORT NAME to get the report name generated. Copy the report name displayed.
While using the menu paths for generating program or displaying report name, make sure the query is selected.
In transaction SE38, give the report name and maintain break points whereever required in display mode and execute the report from se38.
Edited by: Santhoshi Guttula on Jan 6, 2012 7:44 AM -
Dear Experts,
I have a query in dev system which needs to be deleted and replaced by another query with the previous technical name. It's not allowing me to delete the query.
I tried RSZDELETE and as well as in query designer __ delete.
When i am doing it RSZDELETE it says query object blocked. deletion has to be cancelled.
How can i delete this query? Please help me as a matter of urgency
Many Thanks,
RiyaOpen any other query, other than which you want to delete
Then again click on the open button, then search for the query which you want to delete.
Once you find the query highlight it and click on the thirdlast button which is the delete option.
It will give a warning that complete query will be deleted. Press yes and your query will get deleted -
Hi,experts
Can anybody give me documents on infoset query and step by step showing how to create infosetquery. I will really greatful to you all.
Thanks
PreetiHi Preeti,
1. You can query the data using 'Listcube' transaction.
2. Instead of builing on tables, it sits on ODS (no need to worry about underlying tables).
3. Visible on the Bex 'info area' as like other infoproviders.
4. It generates additional key figure called 'Number of records' in the Bex. This will be useful for query.
5. No additional ABAP can be used. But in RSQ02, you can use piece of ABAP.
6. Queries created on data provider infoset can work like other queries including transport functionality.
Hope helps.
For more info check Re: Query on Infoset
Bye
Dinesh -
How to delete the Query Buffer in OLAP
Hi Guys,
I have been working with query, after some time there has some changes in cube data.
But when i execute the query it shows the previous values only.
So, i would like to delete the existed buffer in OLAP from that query.
So, please help me out regarrding this....
Its very urgent.
Points are assigned for better ones.
Thanks in advance
PeterCached results have a timestamp, which is compared with the timestamp of the last data load
and meta data change.
If new data is loaded before a cached query is executed again, the OLAP engine states that the
cached entry is out-of-date. It removes the old entry, loads the current query result from the
InfoProviders and writes back this new OLAP Cache entry. The OLAP Cache entry is invalidated
in the following cases:
Transaction Data Load to the underlying InfoProvider(s)
Deletion of Transaction Data from the underlying InfoProvider(s)
Master Data Load (and hierarchies) and subsequent change run of InfoObjects contained
in the query definition
Currency conversion rate change
This invalidation is also done for meta data changes, i.e. changes to the query structure, and
query generation.
Note that changes to key dates for time-dependent master data does not result in invalidation,
but in an additional cache entry.
In addition, the OLAP Cache can be invalidated and deleted completely via the OLAP Cache
monitor (transaction RSRT 􀃆 Cache Monitor or transaction RSRCACHE). One query entry in
the OLAP Cache can be invalidated by simply re-generating the query. -
How to delete a system generated query
Hi,
I want to delete a system generated query without doing which i am not able to delete a field from field group.
Regards,
Sharadhasure.
I have a infoset with some fields.
I want to delete a field from a field group. When i try to delete,it displays 'Field is used in a query, so cannot delete' .When i saw the query for the field all are system generated queries..i.e usergroup is SYSTGENERATE.
I tried to take the query id from there and tried to display the querym but it says query 'SY000000xx' not generated.
How to delete this query?
Any suggestions?? Is it not possible??
Regards,
Sharadha -
What is an infoset and infoset query?
hello can anyone tell me about
infoset and infoset query.Infoset is based on Joins. Infocube, DSO and infoobject can be used to make infoset.
How to Create Infoset Query (SAP Query)
Steps on how to proceed to create a Query:
ADHOC QUERY
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR PM Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset Create enter name of Infoset - Data source -- > Table join by basis table give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button - go out
TC SQ03 - Select user group - eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness.
If this answer helps, pls assign points.
Thanx in advance. -
Hi
Expert
I want to know how to create infoset query in SAP CRM i request you to kindly provide some basic steps to initialize this
thanks in advance
vinayHello Vinay,
You have three transactions to accomplish this.
SQ01 Is to create the query itself
SQ02 Is to create the infoset that can contain queries.
SQ03 Is to create the user group
First things first:
1. SQ02 Create an infoset and define the master join table (for joined queries) or the master table for queries on a single table. Remember that all the tables you might need in the queries you create in this infoset must be defined here! Once you have assigned the necessairy tables, define the fields you'll need for these tables.
After this is all done, generate the infoset.
2. SQ03 Create a user group. Then assign all the necessairy users that are allowed access to the user group and the infosets that are contained in the user group (so assign the infoset you just created in step 1)
3. SQ01 Enter a query name and press create. Now your infoset should be listed in the input help (if not, make sure your username is assigned to the usergroup you created in step 2)
Now you can start creating your query!
Hope this helps you on track!
Provide points if useful.
Kind regards,
Joost -
Deleted/Trash Query and Infoset
How do I get the user ID of someone who did the deletion of Query or Infoset?
Hi Jay
If you a transport request then it will be possible to find the user otherwise there is no clue to find the user.
Regards,
Chandu. -
How to increase performanceof query based on Infoset?
How to increase the performance of a query based on a Infoset?
As per designing of query, all the necessary fields are placed where they are required.Hi Akshara ,
To improve performanceof query try to remove unnecessary characteristics, attributes, or key figures ,Superfluous conditions or variables .Large InfoCubes and Complex hierarchies .Variables populated by user exits
For characteristics specify either variables or restrictions .
You can create indexes on DSO and Aggregates on cubes (if any).
Please go through the links :
http://help.sap.com/saphelp_crm40/helpdata/en/77/4a213cc534f20ae10000000a11402f/content.htm
Re: Performance of query built on infoset
Query performance issue - Infoset query
Hope you will find this helpful.
Regards,
Jaya
Maybe you are looking for
-
I am trying to put my ipad back to factory settings and it keeps asking for my original Id which is the reason I am needing to reset it. When I try to do this via password prompts it asks for my date of birth which I enter correctly and it tells me
-
Request for UI improvments and some more
Hello Raptor Development Team, Your product is really good, but there are some obvious UI lacks and some possible improvements (sorry, if these lacks/improvements have been pointed before): 1. There shall be possibility to search a text of a function
-
HOW CAN I FIND THE FOLDER USED BY IPHOTO
HI how do i change the path of my iphoto library (or create a new one) this is easy in itunes but scratching my head with iphoto Regards j1s
-
Wlc 5508: windows 8 can't connect using wpa+wpa2
Dear All, I need your help. My customer have Cisco WLC 5508 (cisco wlc 7.0.116.0) . We create ssid with layer 2 security wpa+wpa2. Using Windows 8, it's can't connect to the wireless lan. But if I change, the ssid, with layer 2 security wep. It can c
-
Hi All, I am wondering why the following giving me Unparseable date exception. If I use "MM/dd/yyyy" and "02/05/2002", it will work ok. I can't figure out how the "h:mm a" part works Thanks in advance. import java.text.ParseException; import java.tex