How to delete inspection type assigned in material on mass level

Hi Team,
How to delete inspection type assigned in material on mass level. This inspection type is assigned in material master with indicator set as"Task List", however we are using "material specification". This inspection type is assigned to material type using t-code QA08.
I can deactivate this inspection type using QA08, but I want to delete this record from material master first. So that it would adopt my config. next time when I will assign again insp.type in QA08. I have set this indicator in config. of insp. type as default to "material specification".
Pls suggest me solution to delete this insp. type record from material master.
Thanks

hi
if Material speciiication and task lists are checked -- then no need to do anything,
but only task list checked and u want to do based on mat.spec -- then you need to deactivate and reassign same inspection type using QA08.
no other way, ensure ur stocks are not in QI
thanks
Sami

Similar Messages

  • How To delete Inspection type permanently  in Mass processing?

    Hi SAP gurus,
    I have activated an inspection type 04. Later i found that tis particular inspection type is not useful for me. Using qa08 i deactivated this particular inspection type. But still materials goes to Quality Inspection (QI). But i want materials to go to Unrestricted Use directly. How to delete this inspection type permanently in mass processing.. Or please say me a other solution to make material go to Unrestricted use..
    Thanks in advance..

    Hi Paul..
    Yes i deactivated the inspection type after production is created. You have said that the inspection is still in "Q". Please say me how to find this. Another thing is, i found another option to send it to unrestricted. When doing GR, i selected stock type as Unrestricted. Since 04 inspection type is deactivated, its now going directly to unrestricted even after the production order is created before deactivation.
    Thanks a lot for your help.

  • How to Create inspection that assign to Purchase Order / Material Document

    Dear QM Master,
    I am using QA01 to create inspection lot but can any master tell me , How to Create inspection that assign to Purchase Order / Material Document ?
    Appreciate.
    Thank you.

    Hello,
    When you create an inspection lot manually, you cannot reference an original document (for example, a goods receipt document, an order, or a delivery note).
    In QA01 you can create inspection lot manually for all inspection lot origins except the following:
    10 - Delivery to customer with sales order
    11 - Delivery to customer without sales order
    12 - General delivery
    13 - Repetitive manufacturing
    14 - Plant maintenance
    You can also refer this link
    http://help.sap.com/saphelp_47x200/helpdata/en/2d/3519d8448c11d189420000e829fbbd/frameset.htm
    Please check and revert.
    Regards,
    Priyanka

  • Default inspection Type In the Material Master

    Hello
    We have to assign two -three inspection types in the material master. How to default this inspection types in the material master always .
    Thanks
    JJ

    Dear JJ
    This you will have to do by putting validation in the material master. I dont think you have a standard solution for that.
    Or esle you can run QA08 wherein you can assign inspection type enmass.
    Please let meknow your feedback
    Regards
    Gajesh

  • Inspection type assignment

    Hi All,
    I am  an MM consultant, i am trying to learn QM, I want  to know if there are one more than one inspection types assigned for inspection lot origin, then which inspection type the system will  pick up while creating automatic inspection lots
    Thanks in advance
    regards
    Venkat.

    Hi
    You can use Variant of The Inspection Lot Origin to assign several inspection types to one inspection lot origin.
    A variant 01 must exist for each inspection lot origin. The system then always chooses the inspection type defined as variant 01, if no control specifies another inspection type.
    You can choose another inspection type as the preferred inspection type if you do not want to use the inspection type specified as variant 01 for the inspection lot origin. This is done in the inspection setup of the material master (quality management view).
    The system can use the following special controls to select an alternative inspection type:
    Inspection lot origin 01 (goods receipt for a purchase order)
           a.Inspection type based on the status of the supply relationship
           b.Inspection type for a source inspection based on the info record for the
              supply relationship.
           c.Inspection type for an inspection during external processing based on the
              external processing data in the task list or order operation.
    Inspection lot origins 03, 13, 14 (production or plant maintenance)
                    Inspection type from the order type
    Inspection lot origins 10, 11, 12 (shipping)
                    Inspection type dependent on the delivery category
    If the required inspection type is not active, an inspection lot is not created.
    Path for creating Variant of The Inspection Lot Origin :
    <i><b>SPRO --> QM -> Qulatiy inspection --> Inspection lot creation --> Maintain Inspection Lot Origins and Assign Inspection Types</b></i>
    In this node select the inspection lot Origin and go to Inspection types for the origin, where you can define Variant.
    Regards
    Ramakrishna

  • Table for stoing the inspection type of a material

    Hi,
    I want to know is there any table which stores the value Inspection Type of a material such as  03,zwork maintained in the qualitty view of it.
    plzz provide me guidelines to solve this problem.

    Hi,
       In standard inspection type field is ' Art ' . Check QALS table where you can find this field & if 03 inspection type is maintained it will store in qals table.
    Regards,
    Himanshu

  • How to find condition type for a material???

    How to find condition type for a material??

    Hi Suman.
    Refer the following
    tcodes:http://www.tcodesearch.com/sap-tables/search?q=condition+types
    and http://wiki.scn.sap.com/wiki/display/Snippets/Get?original_fqdn=wiki.sdn.sap.com
    Please search for condition type with pricing condition/pricing procedure.
    Regards,
    Kannan

  • Creation of inspection type (mm02 insp.setup) in mass

    Hi All,
    Is there a way of creating inspection type for all materials via mass update.
    It is in the Quality management view of mm02.
    Thanks
    Venkat

    Hi
    Try to use trx MASS
    Max

  • How to maintain inspection type at the time of material creation using LSMW

    Hi All,
    I have a differnet Issue.
    I am using a std. LSMW to create the materials.
    But now using same LSMW i have to maintain Inspection types(ART-RMQAM) for the materials to be created.
    How this can be done.
    This filed is not found in any structures like BGR....to  BMMH8
    Can I create such a structure ??
    Amol

    Some need the hard answer: it is not possible in one go.
    It is an embedded functionality in material master like classification, but it is not stored in a material master table.

  • How to configure inspection type with serial number

    Dear all..,
    Please guide me how can i proceed serial number congifuration for inspection types. & is there any procedure to active seperately to have control in serial numbers.
    if, any setting need to be done please guide me with procedure.
    Thanks,
    Kiru.S

    hi,
    Active Serial number in SPRO- Qaulity anagement- Quality Inspection- Inspection type and Default values of inspection type.
    than goto IQ01 for serial number and than assign it with material .
    Regards

  • How to delete sub types in a wage type

    hi experts,
    how to delete the subtypes in a wage type . with out deleting the wage type but it should not display in the wage type list

    Hi Deepti,
    Its not deletions, I think u need restriction based on the employee sub group and personnel sub area.
    For this u have to do the following settigns
    1. Maintain grouping for Employee sub grp in table  V_503_G
    2.Maintain the grouping for Personnel Sub area in table V_001P_K
    3. Then go to the table V_511_B and double click on the wage type, u will be able to view 0 to 9 for EES, & PS
    In step 2 & 3 what ever the groupings u have maintained under that number maintain the value '1' and remaining field leave blank. So that the wage type will apllicable and visible to those EES & PS only
    If you don't want for any EES & PS then maintain all the numbers with blank in the table V_511_B. That will not display in the list.
    Never try to delet the wage type, it leads to errors
    Kumar

  • Deletion of class assignment to material

    Hi Gurus,
       I would like to delete class assignment of material.
       Pl.provide BAPI/ Function Module.
       Helpful answers will be rewarded.
    Thanks,
    USR

    Try FM 'MATERIAL_MAINTAIN_DARK'

  • How to control inspection type 08 to trigger on only one SLOC

    Hi Experts,
    We are currently using movement type 311 to transfer materials from SLOC to SLOC that do not need QI for about 5 years now. But for some business reasons. We need to activate inspection type 08 on all of our materials. But by doing this we will trigger inspection lot creations on STO on materials that do not need QI. We do not want to ruin the normal business processes and re-train people on what movement type to use.
    What we want to do is create an SLOC wherein even if we are using 311 it will automatically generate an ILot once it is placed on the specific SLOC. I think SAP has a user exit for this.
    Thank you for the help.
    Eva

    either
    copy mvt type 311 ot Z11
    for more details
    Inspection lot for stock transfer
    or
    Use user exit :QAAT0001
    Refer for more details
    Restrict Inspection Lot Creation

  • How to delete the value assignment in batches?

    Hi guys,
    How is it going?
    We want to delete one assigned value ( for example: the value " powder " in "state of matter " of " physical / chemical data ") in property tree for thousands of REAL_SUBs.
    But to my knowledge, I only know the way to delete them one by one. How can I delete them in batches?
    Thanks,
    Li

    Hello
    the option of the EasyExpert is a nice option (you need to my knowledge an installed expert server in using the easy expert; therefore customizing must be performed, RFC connection etc.).
    In any case there could be a further topic there you could get some "trouble" in some sense. If you exchange by mass the phrase in "state of matter" you can only change the phrase (according to my knowlegde of the easy expert) but nothing else. If you switch from e.g. solid to liquid this is in my opion one of those topics which could be WWI report "critical" (normally it is DG critical too).  Such a change is normally a legal change that means if use the property "State of matter" in MSDS generation then normally most legislations would say: this is a legal change. Therefore you need to "flag" this as "relevant" (standard EH&S process) so that you get the change mark in MSDS. The Easy Expert can not perform this to my knowledge. It can only change the phrase.
    May be you need to consider this behaviour too.
    With best regards
    C.B.
    PS: In your case you will have no problem because you delete something but the topic will come up if you would like to "exchange" something. And I would assume that if you have deleted the "state of matter" you would like to populate the same property again. If you need the "relevancy indicator" one option would be to generate a load file using the standard EH&S approach
    Edited by: Christoph Bergemann on Apr 24, 2010 1:41 PM
    Edited by: Christoph Bergemann on Apr 24, 2010 1:43 PM
    Edited by: Christoph Bergemann on Apr 24, 2010 1:44 PM
    Edited by: Christoph Bergemann on Apr 24, 2010 1:44 PM
    Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM
    Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM
    Edited by: Christoph Bergemann on Jun 10, 2010 10:16 PM

  • Random inspection of 04 inspection type for batch material

    Hi
    My requirement is that against one production order confirmation several batches of 04 insp type are to be created. 1st batch must go for quality check. For other batches configuration will be such that we can chose random batches for inspection if necessary.
    But if I activate 04 type in QM view, wont it create lot everytime batch is generated?

    I think your problem will be the requirement that this is done for the first batch of the process/production order.
    I don't think you can get the DMR to reset to the first stage, (i.e inspect first batch), when you create another order. 
    If you are using an order for a given time frame, i.e. one week, or one day, or one month, you can then set the the maximum number of days to reset.  But that might nto work well depending on when you create the first lot on the frist stage. I.e. you create new orders ever Monday. (once a week).  But you don't create the first batch until Thursday.  The second batch is made on Thursday also and is now a skip lot. Your maximum days at skip is 7.  The DMR won't reset until the following Thursday.   But on Monday you create new orders.  All receipts will be skip lots until Thursday.
    FF

Maybe you are looking for