How to delete Integration scenario or XI Objects permanently

Dear XI experts
Id like to delete Integration scenarios or XI Objects that I created from Integration Builder.
http://static.flickr.com/43/117549573_30c76b7c0b_o.jpg
They go to the lists under Change List.
I misunderstood if I click on Reject Change it can be deleted permanently.
But in fact, it goes back to the list under Scenario tab.
So I found Once I created them, I cannot delete them.
http://static.flickr.com/49/117549572_3a26138b0a_o.jpg
Probably, I cant find any information how to delete Integration scenario or XI Objects permanently.
If you give me any hints, I will appreciate you.
Thanks,
David

Delete object!
http://static.flickr.com/35/117570416_69ecd78655_o.jpg
Confirm the object is deleted from the list.
http://static.flickr.com/47/117570417_542075e7b4_o.jpg
Activate the change list.
http://static.flickr.com/47/117570418_9a415336dc_o.jpg
Select the object to activate ( delete permanently) from change list
http://static.flickr.com/38/117570419_8f03e54a8b_o.jpg
Confirm its gone.
http://static.flickr.com/47/117570417_542075e7b4_o.jpg
[my mistake]
I tried to find the solution from context menu such as reject change.
The meaning of activate change list is . ..
<b>Thanks a lot my boss! Vijaya.</b>
Regards,
david

Similar Messages

How to delete design time & configuration time objects permanently

Hi All,
how to delete the design time objects & configuration objects permanently, because i have created some objects repeatedly in different scenarios. there was some confliction, that's why i am going to delete the objects. Is it possible, if yes revert back to me asap.
Thanks & Regards,
Nag.

hi,
Check tis for how to delete IR objects.
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
and to delete it from ID delete it from the OBjects TAb.
Activate the change list.
Sachin

How to Delete Complete Scenario 7.1 ?

Hi Expters
How we can delete all the objects of IR (ER) and ID Objects . and SLD TS and BS ,Product, swcv
Where to start like produt,swcv,ir,id ... or ?
Thanks
G.Praveen Kumar

Hi,
As far as I know First we have to delete the
1). ID objects
2). IR objects
3). SLD objects.
Because we are using the Software component version in IR and business system in ID these are created in the SLD and we are using the IR objects in the ID.
Check this link
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards
Ramesh

Power Pivot SharePoint 2010 uninstallations left over entries in config DB .can we delete them? How to delete Power Pivot left over objects in DB?

Name Status Version Properties
MSOLAP$POWERPIVOT 0 0x000000000021CF50 <object type="Microsoft.AnalysisServices.SharePoint.Integration.EngineServiceProxy, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"><fld name="m_Versions" type="null" /><fld name="m_UpgradeContext" type="null" /><fld type="System.Collections.Hashtable, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" name="m_UpgradedPersistedFields" /><fld name="m_Properties" type="null" /><sFld type="String" name="m_LastUpdatedUser">Domain\USername</sFld><sFld type="String" name="m_LastUpdatedProcess">PSCONFIG (11884)</sFld><sFld type="String" name="m_LastUpdatedMachine">ServerName</sFld><sFld type="DateTime" name="m_LastUpdatedTime">2014-02-21T17:39:25</sFld></object>
PowerPivotServiceApplication1_c17206969d204609ac63fe5fb1e84d77 0 0x000000000021D09B <object type="Microsoft.AnalysisServices.SharePoint.Integration.GeminiServiceDatabase, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"><fld name="m_Username" type="null" /><fld name="m_Password" type="null" /><fld name="m_FailoverServiceInstance" type="null" /><fld name="m_Snapshots" type="null" /><sFld type="Boolean" name="m_MultiSubnetFailover">False</sFld><fld name="m_Versions" type="null" /><fld name="m_UpgradeContext" type="null" /><fld type="System.Collections.Hashtable, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" name="m_UpgradedPersistedFields" /><fld name="m_Properties" type="null" /><sFld type="String" name="m_LastUpdatedUser">Domain\USername</sFld><sFld type="String" name="m_LastUpdatedProcess">w3wp (992)</sFld><sFld type="String" name="m_LastUpdatedMachine">ServerName</sFld><sFld type="DateTime" name="m_LastUpdatedTime">2014-02-21T17:58:21</sFld></object>
I am having issues with power pivot uninstallation. These two objects are left over after uninstallation.
How to deal with it?
Is there any way to delete these entries in the config DB?
As i Know we should not delete anything manullay from config Database?
Is there any powershell script or stsdam comand to delete these entries from the config database and re install power pivot for sharePOoint
Ravi

Hi Trevor,
I have Reviewed uls logs.. It shows follwoing messages.
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='Domain\USername',
UPN='UserName@domain'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.Security.SecurityAccessDeniedException: Access is denied. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity().
Error 2:
MossHost.TryGetWindowsIdentity: Failed to get WindowsIdentity from IClaimsIdentity. SPSecurityContext.GetWindowsIdentity() threw exception: System.InvalidOperationException: Could not retrieve a valid Windows identity. ---> System.ServiceModel.Security.SecurityAccessDeniedException:
Access is denied. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity() -
-- End of inner exception stack trace ---
at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity()
at Microsoft.Office.Excel.Server.MossHost.MossHost.<>c__DisplayClass8.<TryGetWindowsIdentity>b__6()
Error 3:
CredentialsProvider.GetCredentials: Failed to get WindowsIdentity.
Credential delegation failed because Excel Services Application was unable to obtain a Windows Identity.
COuld you please share some ideas for it.
Thanks
Ravi
Ravi

How To Delete a row from view object

Hi
I have a table whose data is populated based on the view object... and for each row i have a delete icon...
when i press on this delete icon i want to delete that particular row from the view object only..but not from the data
base..please help me in this issue
Thanks

Hi,
as per krishna priya says u can delete .
-----1st one thing let me know vo is eo based .???.
If not here is the sample code to delete a row not from the data base.:
public void Deleterow(OAPageContext pageContext, OAWebBean webBean,String prjid)
int idtodelete;
int fetchedrowcount;
Number prjojectid;
RowSetIterator deleteIter;
prjidtodelete=Integer.parseInt(prjid);
OADBTransaction tr = getOADBTransaction();
ProjectsVORowImpl row=null;
ProjectsVOImpl vo= getProjectsVO1();
fetchedrowcount=vo.getRowCount();
deleteIter = vo.createRowSetIterator("deleteIter");
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedrowcount);
for(int i=0;i<fetchedrowcount;i++)
row= (ProjectsVORowImpl)deleteIter.getRowAtRangeIndex(i);
prjojectid=(Number)row.getAttribute("ProjectId");
if (prjojectid.compareTo(prjidtodelete)==0)
row.remove();
break;
deleteIter.closeRowSetIterator();
Regards
Meher Irk
Edited by: Meher Irk on Nov 2, 2010 12:42 AM

How can delete annual values of Control Objects (FMAVCR01)?

I have run OBR1 and OBR2 for deleting transaction data and master data. They are already deleted successfully. When I display the annual values of Control Objects with transaction FMAVCR01, It shows the commitment item values which are used in the FB01, their document number, consumed amount. I want to delete consumed amounts of commitment items.
Wbr.
İlker...
Ankara,Turkey
Edited by: ilker kkeci on Jan 13, 2012 4:04 PM

Hi,
The more correct report would be RFFMDLFM, as RFFMDLFI deletes only actuals but not the commitments from FM.
Regards,
Eli
P.S. To be excuted only in 'sandbox'/test systems!

How to delete CS and ID objects

Hi
How to delete configuration scenario including all objects in ID so that it should not come back if I do reject changes in ID change List
Thanks,
srini

Srinivas,
You can delete the individual objects under the configuration scenario and then delete the configuration scenario. If you think that you may use some of the objects in future then you can just remove it from the scenario. after deletion , go to activation tab and activate it , this would complete the deletion procedure. Reject chnages would bring back the deleted stuff back to scenario so don't use that.
Hope this helps
Thanks and Regards
Arvind

HOW TO DELETE ALL INFO OBJECTS IN A SYSTEM

HI! gurus,
I want to know how to delete all user created info objects in my laptop.the situation is while practicing SAP in my laptop ...creation of user info objects occured heavily resulting in degrading the system performance.so is there any procedure to delete all info objects(user created)making a system a newly SAP installed one....please help me....
Regards
Ravikanth Pinipolu

Hi Ravi,
u can try it manually to delete the User defined objects..
or u can use the prg: RSDG_IOBJ_DELETE and in that u can give some selection of objects for the deletion..
Give it a try..
Thanks
Hope this helps

R/3 u2013 XI u2013 MDM integration scenario - Standard import Maps problem

Hi Data Masters,
We are working on R/3 u2013 XI u2013 MDM integration scenario for Vendor Object. We have extracted main table Data using u201CMDM_CLNT_EXTRu201D program. Now while importing the data in MDM we want to use u201CStandard business content i.e. Standard Import Maps (Name u2013 cremdm - 03 u201D but this maps are not mapping all the fields. So do we need to extend this maps..??
OK. Second, To create own maps we are facing following problems,
1) In source section many fields are reflecting twice means in two segments i.e. LFA1 and ADRMAS like Name, City, Street, country etcu2026 whereas in Target section we have one field for the same so how to maps this fields.
2) In source, There are few fields like ADRNR which have values but in target we donot have any fields to map for the same, so how to handle thisu2026
Helpful answers will be rewarded,
Cheers
RC

closed

Integration Scenario

Hi All,
I am new to XI. I need to know about Integration Scenario. What is it? Why we are using Integration Scenario? How it differs from Integration Process? and how to use Integration Scenario? Give a simple example (like file to file using Integration Scenario).
Thanks and Regards,
Nithya

Hi,
>>>Integration Scenario,Why we are using Integration Scenario,how to use Integration Scenario
Integration scenario is used to logically relate all XI objects for a particular scenario. It also eases the creation of configuration objects.
You use an integration scenario to define the message exchange and message flow for collaborative processes. Normally, these are processes between different business partners that are generally coupled by the exchange of messages.
The integration scenario provides you with a central point of access for all objects that you require for semantic and technical integration, for example interfaces, mappings, and software components.
You can integrate an executable integration process into an integration scenario.
Follow the blogs for more details:
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
/people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
http://help.sap.com/saphelp_nw2004s/helpdata/en/88/7adb7a030b424b8ef29b99461e52a8/content.htm
Modelling Integration Scenarios in XI
Integration Scenario
Integration Scenario
>>> Integration Process
An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
Please refer http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

How to delete object in Integration Repository SAP PI 7.0

how to delete object in Integration Repository SAP PI 7.0

Hi Rashmi,
Right click on the object, you would find the option to delete--> select it. Goto Changelist Tab and activate the changes.
Ref: /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Re: How to delete/remove the software component from integration repository
Thanks,

How to use objects from other SWCs in my BPM Integration Scenario

Dear all,
I am experiencing some difficulties with the following. I have created a BPM Integration Scenario in a SWC. It contains a tranformation step in which a message from that SWC is split and mapped to two IDOCs. These IDOCs are imported in anothern SWC which I use for common objects. I have created Abstract Message Interfaces based on these IDOCs in this "COMMON" SWC, but the probIem is that I cannot use them in my scenario in the other SWC. Even though I have a usage dependency (Installation Time) created to the "COMMON" SWC.
Any suggestions would be much appreciated!!
Thanks in advance.
Will happily provide points for good answers.
Auke

Thus, I would have to copy/import all objects to the same SWC?
Or create a separate SWC for BPM Integration scenarios?
I have tried to create the Abstract Message Interface in the SWC and reference it to the IDOC structure in the "COMMON" SWC. This results in a reference to an invalid object during activation. Even though the defined usage dependency.
What's the standard solution?
Cheers,
Auke
Message was edited by:
A. Schotanus

How to delete unwanted namespaces in Integration Directory

Hi All,
I have made some testing while creating namespaces in Integration Directory. Now I want to delete the unwanted namespaces. Please help me in doing so.
Regards,
Soorya

HI,
If u want delete unwanted namespaces in IR and ID.Please following these steps.
In IR:
1) First u have to select Softwarecomponent.
2)Select u r Unwanted namespace.
3)Delete developed object onebyone.
4)Remove the namespace from Namespace list Press button.
5)Then activate the deleted objects from change List.
IN ID.
1)Select the integration scenario and right click on it..under popup menu select delete.Then auotmatically delete the objects.After u activate all the deleted objects from change list.
Once u complted these steps unwanted objects have been deleted.
Thanks
Ravi

How to delete the objects created for experimenting in XI

Hi,
We have recently taken up XI and have created many objectes in the IR and ID in order to practice the scenarios...
Now there are many such objects existing in the IR which v dont use any more...
But i didnt find any delete option.
plz tell me how to delete them...
thanks in advance
Pavan

Hi Sravya,
thanks for ur reply..
i am following the link u have given me..
but i have one problem in this blog
i am unable to find the sign to delete the name space......
i searched for that sign in thw whole GUI of IR..but didnt get it..
plz tell me the navigation path to it
Pavan

How to delete proxy Objects/structure in R/3

Hi Experts,
In my scenario i generated ABAP proxy. I want to delete that proxy now. I am selected the particular proxy and i deleted. but here only service interface only deleting. not deleting all objects like message type and data type and proxy generated objects are not deleting.
While i am deleting it was allowing me to delete only root object. under root table structure and datatype/message type objects are not deleting. here even i deleted lock entrys also.
Here my question is how to delete all proxy objects. please give me your valuable suggestions.
thanks
Srini

refer this Problem in deleting Proxy Objects that talks about the same issue .

How to delete Integration scenario or XI Objects permanently

Similar Messages

Maybe you are looking for