How to delete line item in a Work Order (only a line created in operation)

Hi,
I have created a refurbishment order to refurbish a mechanical seal at external parties. In the work order operation tab, I have created one line items for this purpose and a Purchase Requisition is generated. Suddenly, operation decided to cancel this request and I have problem to delete the Work Order and  Purchase Requisition. I have tried to delete the operation line item but failed. This is the message when try to delete the line item " The last active operation cannot be deleted".  Appreciate help on how to delete this Work Order and Purchase Requisition.
Edited by: Zahari Yusof on Apr 4, 2008 3:20 AM

hi
In Standard SAP while creating an order the short text you are specifying will automatically appear in the first operation,also in order system will ask you to enter atleast single operation ,hence it is not possible to delete the operation line ,
what you can do this either TECO the order which will clear any open PR for this
or create another operation with control key for internal activities say dummy with operation no 20 and save,then go in to order in change mode and try to delete the operation line 10 ,i think system will allow you to do that
regards
thyagarajan

Similar Messages

  • How to delete all items in the HUB ?

    How to delete all items on shot in the HUB ?

    Hi all,pay attention to the words I've marked in bold in the first answer from the technical support member:  "From the BlackBerry Hub, hold your finger on the date at the top of the list. A side menu will appear. Click on the Garbage Can to delete all messages prior to that date" At first, I also didn't understand how to make it works, but you have to slide until the date is at the top of displayed messages, then you can tap and hold to select all messages preceding that date. 

  • HT1349 how to delete multiple items in itunes

    how to delete multiple items in itunes

    I inported my music files and see that I have multiple copies on my files so now I have multiple copies in iTunes.
    Some are multiples, some are duplicates, some are from different dates and some do not work and have the symbol for this.
    Thus, I must be picky about which ones I delete.
    Looks like I will have to continue deleting manually.

  • How to delete the items in the recycle bin permanently from the windows using Diruse command

    How to delete the items in the recycle bin permanently from the windows  using Diruse command.
    Because most of the time we get out of disk space issues.
    Can somebody help me in giving with an example

    You can right-click Recycle Bin|Properties and choose radio button for
    Don't move files ....
     This one may also help.
    http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • How to delete an item in the table

    hi all ,
    Is anyone there to give me an idea , how to delete the item in the table , by selecting the row. , for the what i have to do , is there any documentation to follow , guide me itys really urgent.

    Hai Madhu,
    It is pretty simple.
    First u define a button. and in onAction  Event of the button write the following code.
    process is as follows:
    1)get the node
    2)get the element
    3)using the method remove_element() ,remove the element.
    <u><b>The Sample Code is as follows</b></u>
    DATA:
          node_flighttab                      TYPE REF TO if_wd_context_node,
          elem_flighttab                      TYPE REF TO if_wd_context_element.
        node_flighttab = wd_context->get_child_node( 'FLIGHTTAB' ).
      get element via lead selection
        elem_flighttab = node_flighttab->get_element(  ).
        node_flighttab->remove_element( element = elem_flighttab ).
    Follow the above code ,it will definately help you.

  • How to delete line/address in PDF file?

    How to delete line/address in PDF file?
    Joan Willets

    You delete it with teh touchup text/ touchup object tools in Acrobat or mark it for redaction, so it gets blackened.
    Mylenium

  • How to delete an item in adept database

    I would like to know how to delete an item in my adept Inventory or/and in my Distributor with a script putting the ID as a variable.
    What woud you advise ?
    Thanks

    Hai Madhu,
    It is pretty simple.
    First u define a button. and in onAction  Event of the button write the following code.
    process is as follows:
    1)get the node
    2)get the element
    3)using the method remove_element() ,remove the element.
    <u><b>The Sample Code is as follows</b></u>
    DATA:
          node_flighttab                      TYPE REF TO if_wd_context_node,
          elem_flighttab                      TYPE REF TO if_wd_context_element.
        node_flighttab = wd_context->get_child_node( 'FLIGHTTAB' ).
      get element via lead selection
        elem_flighttab = node_flighttab->get_element(  ).
        node_flighttab->remove_element( element = elem_flighttab ).
    Follow the above code ,it will definately help you.

  • How to delete a photo from Device-Work/photos

    How to delete a photo from Device-Work/photosI saved a photo from my work email account (it's a picture of a golf green) and afterward, I noticed that I can't really do anything with it.
    How do you delete files from the "work" side of the phone?
    Also curious why these files are even there if you can't do anything with them...what's the point?

    i didnt even know there was a work side to the phone.
    its my personel phone but i use it for work as well but dont have a work email set up as its the national health nhs.net and there is so much protection that i couldnt be bothered with it.
    only way i think you could get round this problem is sending the email with the attachment to one of your personel emails like yahoo which if you have that set up on your phone and save the attached picture it will automatically be saved in your pictures folder.

  • How to delete an item from purchade

    How to delete an item from purchade

    From your computer open itunes and click the itunes store icon.  Go to the the App Store tab.  Click on the "Purchased" link, on the right side under App Store Quick Links.  Locate the unwanted app and hover your mouse over the icon and an "X" will appear in the upper left hand corner.  Click the "X" to hide the app from all "purchased" lists.

  • HT3737 how to delete news items?

    how to delete news items?

    Reading List items?
    "To remove webpages from the Reading List, use one of these methods:
    Click the "x" icon that appears on the right of the webpage preview in the Reading List column when the cursor hovers over it.
    Control-click on the webpage preview in the Reading list and select "Remove item"."
    Quoting from below linked article from Apple.
    Reading List
    http://support.apple.com/kb/HT5364

  • How to stop PR creation from PM work order for a particular vendor?

    Hello Experts,
    We have following scenario for breakdown maintenance activities.
    When a machine breaks down, a breakdown order is created in SAP. The external manintenance services are planned in the order. When the order is released, a single PR (with multiple item numbers corresponding to number of services) is created by SAP. The PR has a release strategy. When PR is released, PO is created followed by the SES.
    The practice followed AS -IS for breakdown outside business hours:- If the breakdown happens outside business working hours, the person releasing the PRs is not available & hence PR can not be released resulting in no PO & no subsequent SES.
    In this case, the maintenance is completed by the external agency & the work order is TECO. The next day, TECO is reveresed, new PR is created, released, converted into PO, & then SES.
    TO-BE process:- Client expects that, for certain vendors identified, PR should not get created at all from the breakdown order. (The list of  vendors will be maintained seperately). For these vendors, a framework order will be created at the start of fiscal year & SES will be created as & when required agaainst the framework order.
    My concern is :- How to stop PR creation from PM work order for a particular vendor? OR delete the created PR?
    Highly appreciate your quick response.
    Thank you.
    Amit
    Note:- My ABAP consultant has checked following BADI's, but could not find it useful.
    IWO1_ORDER_BADI
    ORDER_COSTING_CK
    DATA_EXTENSION_CK
    VALUATION_CK
    ME_REQ_OI_EXT
    IWO1_PREQ_BADI
    ME_CHECK_SOURCES
    ME_REQ_POSTED
    IWO1_ORDER_BADI

    Dear Amit
    I am giving a different dimension to your question check if it fulfills your requirement -
    As we know Vendor selection comes at a later stage only after your PR creation, approval & RFQ etc. & PR generation from maintaine. order is controllled through control key PM03.  While triggering PR from order you have to specify Material group, Purchase group and vendor. Try to control it through authorisation as all these are authorisation objects. The persons executing breakdown order shall no t be given this authoriations
    shakti

  • SAP won't let me delete an item from a sale order!

    I am trying to delete an item from a sale order but i get this message
    "A production order already exists for item 000030
    Message no. V1603"

    What was the item category of material??also what was the movement type assigned??
    If already some production order exists with this line item then ask your PP guy to come out of this...(first you need to take necessary action on Production order--then you can delete line item at sales order level)
    Phanikumar

  • How do I view additional records in Work orders in SSM?

    How do I view additional records in work orders section? I want to view 100 records instead of the present 100 records? What would be the navigation to view more records ?

    Am going to close this one and replace with simpler question

  • How to Attach permit automatically to an work order using abap

    how to Attach permit automatically to an work order using abap
    Moderator message : Not enough re-search before posting, show the work you have already done, thread locked.
    Edited by: Vinod Kumar on Jan 30, 2012 2:16 PM

    At least make sure that you have a default method 'browse' in your class. I mean that make a method for "displaying" or "browsing" or whatever you want to happen when you click the object, and make it default. OR actually if I remember correctly there is a default method existing already, but put your code to there.
    Also try this:
    -Create a container element of type 'sales order' into your task
    -Bind the sales order object from workflow to the the task
    Regards,
    Karri

  • EAM OSP: How to Disable Requisition Import AutoRun on Work Order Release?

    Hi,
    We want to create Purchase Requisition for OSP resource Items from eAM Work Orders by manually running Requisition Import request from purchasing. But as work order is released Import Requisition is auto run and requisition created. Is there any parameter or profile option to stop this request from auto run on release? Kindly guide.
    Regards,
    Syed Mustafa Arshad   

    Hi Hrishi,
    Thank your for your response.
    The second option you specified Operation is used in case of Oracle Discrete Manufacturing not for EAM. It is used when you want to start requisition as Item is moved from one operation to next so it cannot be used in case of EAM.
    We wanted it because our requirement was to generate requisition in incomplete status and with requisition import automatically parameter is passed as "Yes" for Workflow and requisition is generated in Approved Status. There is a patch but it was not working fine with 12.1.3 and the issue is on SR and we needed a work around urgently. But now a new patch was provided and it seems our issue is resolved now and now Workflow parameter is passed as "No".
    And about requisition creation time, I came to know after raising service request that it is standard functionality and requisition import cannot be delayed to run it later manually.
    Thank again for your response.
    Best Regards,
    Syed Mustafa Arshad

Maybe you are looking for