How to delete multiple yellow request in PSA

I am in BI7 and I have to delete the all the request present in PSA But in my PSA there are around more than 500 request which are in yellow status.Please suggest how to delete all the request in one go ,Since it very cumbersome to change status of every request to red and then delte it

Hi,
Debjani thanks for your reply,
It helped me
I have first deleted the contents from PSA table and
then I have searched for request in RSTSODSREQUEST but this table does not contain that requests
then i have got another  table RSREQDONE  whcih contains that request so I have deleted  request from that table.
Final solution is
Go to SE14 >> Give the PSA Table name >> delete it
Then delete the requests from the table RSTSODSREQUEST/RSREQDONE

Similar Messages

  • How to delete 100+ released requests from the import queue?

    Hello
    How to delete 100+ released requests from the import queue?
    One by one or there is more convinient way?
    Thanks

    To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
    1) Highlight the status field of the import queue.
    2) Sort the import queue by the status.
    3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
    4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
    5) Go to menu option Request > Delete.
    If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

  • How to delete a single request from DSO in BI 7.0

    Dear Experts,
    Could you please tell me how to delete a single request from DSO?
    I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
    Please suggest me this issue.
    Regards,
    Prathap

    IN DSO--its a very basic thing....
    ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
    So ,each new request has a realationsip with the older request.
    So in the cases:
    1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
    e.g older request  entries:
    a x 1
    new request
    a x 2
    change log
    a x 1
    a x -1
    a x 2
    so its quite obvious you can't have  a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
    2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
    I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
    thats request reverst posting
    IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
    regards,
    rk

  • How to delete multiple contacts in ios7??

    how to delete multiple contacts in ios7??

    Hi arunvdi!
    Here’s an article for you that will help you with deleting contacts:
    Manage conversations - iPhone
    http://help.apple.com/iphone/7/#/iphf2d85437
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • How to delete multiple contacts in iphone 5

    how to delete multiple contacts in iphone 5

    This is a good little app to check for duplicates and delete multiple contacts all at the same time: https://itunes.apple.com/gb/app/delete-duplicates-+-contacts/id508504148?mt=8

  • How to delete multiple contacts in iphone

    how to delete multiple contacts in iphone

    To Erase iPhone Contacts, SMS and Photo Permanently,you must to use a iPhone data eraser software.
    This use guide about how to deleted iPhone contacts,it can help you erase all contacts from iPhone permanently.
    How to Delete iPhone Contacts Permanently
    http://www.z0download.com/useg...

  • How to delete the duplicate data  from PSA Table

    Dear All,
    How to delete the duplicate data  from PSA Table, I have the purchase cube and I am getting the data from Item data source.
    In PSA table, I found the some cancellation records for that particular records quantity  would be negative for the same record value would be positive.
    Due to this reason the quantity is updated to target but the values would summarized and got  the summarized value  of all normal and cancellation .
    Please let me know the solution how to delete the data while updating to the target.
    Thanks
    Regards,
    Sai

    Hi,
    in deleting the records in PSA table difficult and how many you will the delete.
    you can achieve the different ways.
    1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
    2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
    3.you can restrict the cancellation records at query level.
    Thanks,
    Phani.

  • How to delete the Transport Request?

    Hi all,
       I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
    Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
    Regards,
    Nagesh Ganisetti.

    I am not sure I understand.
    You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
    Transports will be configured in all the systems in your landscape (including production).
    Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
    Added -
    I now see that the request is in production.
    Igore the above in that case.
    If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
    When you try to delete, what message do you get?
    Message was edited by: Ajay Das

  • How to delete the duplicate requests in a cube after compression.

    Hi experts,
        1. How to delete the duplicate requests in a cube after compression.?
        2. How to show a charaterstics and a keyfigure side by side in a bex query output?
    Regards,
    Nishuv.

    Hi,
    You cannot delete the request as its compressed as all the data would have been moved to E table ..
    If you have the double records you may use the selective deletion .
    Check this thread ..
    How to delete duplicate data from compressed requests?
    Regards,
    shikha

  • How to delete the compressed request in bi 7.0?

    how to delete the compressed request in bi 7.0?
    Reverse Posting option available in BI 7.0?
    Thanks,
    Pramod

    Hi Pramod,
    Check this Thread,
    Re: Selective deletion after compression
    before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
    Hope this helps..........

  • How to delete multiple rows from ADF table

    How to delete multiple rows from ADF table

    Hi,
    best practices when deleting multiple rows is to do this on the business service, not the view layer for performance reasons. When you selected the rows to delete and press submit, then in a managed bean you access thetable instance (put a reference to a managed bean from the table "binding" property") and call getSeletedRowKeys. In JDeveloper 11g, ADF Faces returns the RowKeySet as a Set of List, where each list conatins the server side row key (e.g. oracle.jbo.Key) if you use ADF BC. Then you create a List (ArrayList) with this keys in it and call a method exposed on the business service (through a method activity in ADF) and pass the list as an argument. On the server side you then access the View Object that holds the data and find the row to delte by the keys in the list
    Example 134 here: http://blogs.oracle.com/smuenchadf/examples/#134 provides you with the code
    Frank

  • How to delete multiple photos

    how to delete multiple photos at once

    Hello 2075,
    Thanks for using Apple Support Communities.
    To delete multiple photos at once on your iPad, all you need to do is tap on Select while in the Photos app, select the photos you'd like to delete, and then tap on the trash can.
    Organize photos and videos - iPad User Guide
    Take care,
    Alex H.

  • How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

    How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

    Sorry I had to reply through your profile Gail from Maine, my PC has java issues. In any event, when I delete them directly from my device everything is perfect and cool. However, in the rare instance I want to add new music that I actually buy in stores (I know, quite the unique and old-fashioned idea...but hey Im an audiophile) once I upload the tunes, everytime I sync my library it re-adds everything that I spent hours deleting. In a perfect world, I thought I could maintain a massive iTunes Library, and add or delete (remove) songs from my iPhone to save both memory or keep my iPhone selections more current/apt to my musical "tastes" at that time. I know about the whole playlist thing, but thought there might be an easier way. ie - checking/un-checking the little box next to the song name, and then doing a sync. Again, everytime I do this however, whether everything is checked or un-checked it adds the entire library! So frustrating. Any suggestions. Thank you graiously in advance for your help.

  • How to delete multiple duplicates of multiple songs?

    How to delete multiple duplicates of multiple songs from my library at the same time, rather than each individually?

    Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
    Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created.  If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
    Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See thisthread for background, this post for detailed instructions, and please take note of the warning
    to backup your library before deduping.
    (If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
    The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
    tt2

  • How to delete multiple emails from iPad 2

    how to delete multiple emails from iPad 2?

    Update to ios7.0.3. They resurrected the trick of Edit, click a single email, then press move, release the email you checked and then all the e mails can be moved to whatever folder you want.

Maybe you are looking for