How to delete only part of a iMessage conversation

How do I delete only part of a conversation in iMessage?

Just press and hold the part of the conversation you want to delete. A black box will appear then press More... A circle will appear to the left then select delete.

Similar Messages

  • How to delete only part of an event clip

    In Imovie 09 I reject part of a clip in an event and when I send it to trash it takes all the clip. So all my event is in the trash. All my projects are useless and I have to record all from the camera again.
    What I want its just to eliminate part of the clip and stay with the rest. Can anyone tell me how?
    Thanks a lot

    Don't "Move rejected to trash" You shouldn't trash part of clip or all of clip from imove(even anywhere), when "Project" is NOT finished/finalized. You can right click and "Reject Selection"(Yellow highlighted portion), of clip, but don't throw in trash. If you did Not Empty,you might be able to drag back out to desktop.
    The Video that is in Event Library, does not all have to go into Project.(Edit in Event pane, and drag highlighted portion (you want) into Project.
    http://support.apple.com/kb/PH2116 This might help with importing to project.
    http://support.apple.com/kb/PH2322
    http://support.apple.com/kb/PH2320
    There are also quite a few very helpful guides that might help with the rest of your project here
    Hope this helps. Cheers.

  • How to send only part of a sequence to Encore?

    Hi
    I'm new to CS5.5 and I've been trying to figure out how to send only part of a sequence to Encore from PPro. I see in the Help file that it says this can be done but it doesn't explain how to do this (or I haven't been able to find where it's explained). When I use "send to Encore" with dynamic link it sends the whole sequence even though I've tried marking in/out or marking the section I want with the work area bar. Is it not possible to do this using dynamic link?
    Thanks!
    Steve

    Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
    But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
    Thanks
    Steve

  • How to copy only part of the music media folder and library to another Mac

    Dear friends,
    I run iTunes in Mac OS. The iTunes music media folder is now located in an external HD because it´s quite large (2T). The problem is that I´got a second Mac and I´d like to copy -in this second Mac, only part of my music using only its internal  HD (300 Mb) . How can I do this copy while preserving art and play-lists?
    Thanks in advance

    tcynk00 wrote:
    how I can transfer only selected pieces of music (all library will not fit anyway)
    that's what playlists are for.
    and how to maintain transfer process in future when I want to change the music on my nano.
    add/delete track to/from the playlist you sync to your device.
    JGG

  • How to delete the contact name in iMessage memory on iphone5

    Please help how can I delete the contacts name under iMessage memory?
    Eg.: when I start to sent text messages to person name start with K which even contacts are already been deleted from my
            Contact list still pops up.

    After MANY , MANY blogs and discussions and failed attempts I've figured this out. When you go to write a message the contact that was deleted still shows up next to the contact is a letter I with a blue circle all you have to do is tap it then it gives you the option to delete recent contact and lord behold that contact is permanently gone no back up syncing needed or anything !!!

  • How to make only part of a PDF document editable?

    I'm looking to see if there is a way to make only part of a PDF document editable. My problem is, I have pieces of collateral that some of our channel partners need to be able to add their logo to and then edit the contact information on them, but we don't want them to be able to change any of the main copy on these documents. The only thing I've been able to come up with as a solution is to create outlines of the text that I don't want editable, but I need the copy to be able to be read by computer systems for disability purposes. Does anyone have any ideas on something I could do for this? Or has anyone dealt with anything like this? Any help would be greatly appreciated!

    Hi vward26,
    You can use Acrobat to make only part of a PDF document editable.
    Kindly refer this FAQ:http://tv.adobe.com/watch/acrobat-x-tips-tricks/how-to-convert-just-part-of-a-pdf-file/
    Regards,
    Florence

  • Mail: How to print only part of a message

    I often want to print (on paper) only part of a message. I have tried:
    1. Select the part to be printed, but the whole message is printed;
    2. Do Print > PDF (button) > Open PDF in Preview (button) >Select and delete the part that I don't want > "Message": The original document can't be changed, so a duplicate with your changes has been created" appears at top pointing to an active  down arrow and link labelled "Edited" > I click on that link > Dialogue box :" Header text of message", "Where:" (Documents etc. offered).
    But I want to print the part of it without the fuss of saving, searching and then printing, then deleting. My task does not seem unusual. Is there a way? Thanks.

    OOPS! I just remembered before going on holiday that on advice from somewhere that for security reasons it was a good idea to prevent Java from being used (Safari Preferences). So I did. I have just re-enabled Java and all is well. Whew!
    But is enabling Java a security risk (malware)?

  • Adobe X Pro: How to Delete ONLY the footer?

    As far as I can see, I can only delete both the header and footer at the same time. I would like to delete ONLY the footer to add a new one without disturbing the header. I cannot figure out how to do this. The header was created in word, and then the footer was created in adobe after it was converted. I simply want to update this footer I made, but even if i choose the update header/footer option it deletes the header. I don't understand why adobe keeps deleting the header. This happens on any similar document I try it on.
    Thanks for any help!

    no you can't with the phone but if you use a computer program like iphone backup extractor and transfer the messages to your computer you might get some indication of size.  A safe bet is that the messages with pictures and vids are the big ones

  • How to export only part of animation?

    In the case of a big animation (tens of thousands of frames), is there a way to render (using Export Movie) only part of the animation, e.g. frames 100-500 and nothing more? That way, loss of time would be reduced.

    Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
    But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
    Thanks
    Steve

  • How to delete only a portion of the data portal?

    This would be similar to DataDelAll() command, but allow only a limited set of data to be removed.
    For some background:
    - DIAdem 9.1 sp2
    - LabVIEW interface calling various DIAdem/VBS scripts
    Using DIAdem to format reports based on various scripts and TDM data
    results, I would like to be able to load and unload various data files
    (TDM) while maintaining the specific report layout (also TDM) data in
    the portal.  Two (ugly) options seem to be:
    a)  load entire data result set into the portal (including layout instructions) and process, or
    b)  keep track of layout state variables and clear portal/reload layout/load next data
    This would all be easy if there is a command to enable the right-click delete... behavior of the data portal UI.
    Thanks!
    James

    Hello James,
    there are diufferent commands you can use to delete only a portion of the data in the portal. You can delete single channels, a selection of channels, or entire groups with these three commands:
    Call ChnDel(ChnArg) - deletes one channel
    Call ChnDelete(ClpSource) - deletes a selection of channels
    Call ChnSDel(ChnArg1, ChnNo) - delets a number of channels
    Call GroupDel(TargetGroupIndex) - deletes a group including its channels
    To create a selection of channels as argument for the second command, have a look at the functions
    ChnSelAdd, ChnSelGet, ChnSelCount
    Regards
    Ingo Schumacher
    Systems Engineer Sound&VibrationNational Instruments Germany

  • In iOS 8 will I be able to delete individual photos from an iMessage conversation?

    Right now Messages take up over 3 GB of space on my phone. With the new iOS 8 update, I discovered that it is because it does save every photo or video you send as part of a conversation, even ones that were previously unavailable by scrolling back as far as possible. I want to know if there is going to be the ability to delete photos individually to free up space? I don't want to have to delete the entire conversation to free up space.

    You can delete a photo from a message conversation by tapping and holding the photo, then tap More... above the photo, confirm that the photo has a check to the left of it, then tap the trash icon.  You can also scroll through the conversation and tap multiple items to select them before tapping the trash icon.

  • How to allow only part of users in AD login sharepoint?

    We have a SP2013 farm using windows authentication. On the AD there are 10,000 user accounts and we have no edit permission on AD. (Hence, I cannot setup any group there) As the Sharepoint admin I only have a list of 1,000 users allowed to access. There
    is no existing group setup to indicate these 1,000 users.
    My question is, how can I allow these 1,000 user login Sharepoint while blocking the other 9,000? 
    My concern is these 9,000 users will get their My Site self-created when he browse the My Site web application. Another concern is when they access some page without authorization, they will get a form allow them asking for access. The site owner may grant
    access to them by mistake which I need to avoid.
    Thanks.

    Hello Mark,
    Regarding the second part of your question. You can uncheck the option 'Allow requests for Access', it is described how in the following thread:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d1e948cf-6289-48f9-9f25-81b57b292c40/how-to-hide-request-access
    - Dennis | Netherlands | Blog |
    Twitter

  • How to transfer only part of the library?

    I have over 80GB of music (mainly classical) in my iTunes library and I am using it with my iPod classic. I am planning to buy now a new 16GB iPod nano and my question is how I can transfer only selected pieces of music (all library will not fit anyway)and how to maintain transfer process in future when I want to change the music on my nano.
    Thanks for any suggestions.

    tcynk00 wrote:
    how I can transfer only selected pieces of music (all library will not fit anyway)
    that's what playlists are for.
    and how to maintain transfer process in future when I want to change the music on my nano.
    add/delete track to/from the playlist you sync to your device.
    JGG

  • How to reference only part of Image element in Site Studio 11g

    I have defined a Static List and one of the elements is set as an Image. I have the need to only use the src part of the image element and not actually the entire img tag that is created. How can I do this?
    Example:
    <wcm:element name="LargeImage"><img alt="photo01" src="[!--$wcmUrl('resource','steldev5015106')--]" /></wcm:element>
    I'd like to only use the src= piece. My javascript looks like this and the image is breaking because the entire tag is going within the ""
    src='<!--$wcmListElement("LargeImage", wcmListIndex)-->'
    Edited by: 848038 on Sep 1, 2011 8:32 AM
    Edited by: 848038 on Sep 1, 2011 8:33 AM

    Here is what I put in my code and it works beautifully.
    <!--$myImage=wcmListElement("LargeImage", wcmListIndex)-->
    <!--$myImage=strSubstring(myImage,strIndexOf(myImage,"src=")+5)-->
    <!--$myImage=strSubstring(myImage,0,strIndexOf(myImage,'"'))-->
    <img style="position: absolute; top: 0px; left: 0px; display: block; z-index: 6; opacity: 1;" src='<!--$myImage-->' alt='<!--$wcmListElement("ImgAlt", wcmListIndex)-->' title='<!--$wcmListElement("ImgTitle", wcmListIndex)-->' longdesc='<!--$wcmListElement("ImgLongDesc", wcmListIndex)-->' height="313" width="520">

  • How to set only part of the document as "read-only"?

    Hi,
    I am using SharePoint 2010. I would like to set some of the columns as "read-only" while some of them are still editable. If I use Advanced Settigns>Item-Level Permissions, I can only set the whole document as "read-only".
    Is there a way I can do what I wannt?
    Thanks a lot!

    Hi,
     There is no OOTB way to set a column as read-only.  I think you want to make some of the fields as Read-Only in the EditForm.aspx. If so, then you can use the Javascript to do. 
    Add a Content editor webpart to the Editform.aspx page and place the javascript method to make a field read-only.
    You can use the _spBodyOnLoadFunctionNames.push("MakeReadOnly()") method to assocaite your method to the EditForm.
    Here are the links which will help you.
    http://dishasharepointworld.blogspot.in/2011/08/read-only-field-in-sharepoint.html
    http://nishantrana.wordpress.com/2009/01/30/read-only-field-in-sharepoint-editformaspx/
    http://www.jbmurphy.com/2010/06/01/how-to-make-a-field-in-a-sharepoint-edit-form-readonly/
    *******Don't forgot to MARK AS ANSWER / VOTE AS HELPFUL if it really helps************
    R.Mani http://rmanimaran.wordpress.com

Maybe you are looking for