How to delete only part of an event clip

In Imovie 09 I reject part of a clip in an event and when I send it to trash it takes all the clip. So all my event is in the trash. All my projects are useless and I have to record all from the camera again.
What I want its just to eliminate part of the clip and stay with the rest. Can anyone tell me how?
Thanks a lot

Don't "Move rejected to trash" You shouldn't trash part of clip or all of clip from imove(even anywhere), when "Project" is NOT finished/finalized. You can right click and "Reject Selection"(Yellow highlighted portion), of clip, but don't throw in trash. If you did Not Empty,you might be able to drag back out to desktop.
The Video that is in Event Library, does not all have to go into Project.(Edit in Event pane, and drag highlighted portion (you want) into Project.
http://support.apple.com/kb/PH2116 This might help with importing to project.
http://support.apple.com/kb/PH2322
http://support.apple.com/kb/PH2320
There are also quite a few very helpful guides that might help with the rest of your project here
Hope this helps. Cheers.

Similar Messages

How to delete only part of a iMessage conversation

How do I delete only part of a conversation in iMessage?

Just press and hold the part of the conversation you want to delete. A black box will appear then press More... A circle will appear to the left then select delete.

How to send only part of a sequence to Encore?

Hi
I'm new to CS5.5 and I've been trying to figure out how to send only part of a sequence to Encore from PPro. I see in the Help file that it says this can be done but it doesn't explain how to do this (or I haven't been able to find where it's explained). When I use "send to Encore" with dynamic link it sends the whole sequence even though I've tried marking in/out or marking the section I want with the work area bar. Is it not possible to do this using dynamic link?
Thanks!
Steve

Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
Thanks
Steve

How do you connect parts of a split clip?

How do you connect parts of a split clip? I unlinked audio from video, split the ambient audio and removed some unwanted background noise. I now need to connect the two parts of the audio and stretch to match the length of the video portion. I don’t want to stretch just one part of the audio; I need to stretch the entire audio clip so that it is uniform. I am using APE12.

Thanks for such a quick reply. I was shooting footage for a soothing background: gently rolling waves washing on the shore, with the sound of the water. In the middle of the clip, some voices were audible. Everything was timed, so it wasn't practical to just cut out the middle of the video. (In addition, this would leave a visual hiccup due to the motion of the sea.)
So it seemed like the best and easiest thing was to cut out only the bad audio (only a few seconds) and then extend the duration of the remaining audio track to match that of the video track. This was easy using Time Stretch, however this method only extended the portion of the audio track prior to the cut, leaving one portion at original speed and the other at 96%. In other words, the audio track is the same length as the video track, but there are two slightly disparate parts to the audio track--one a bit slower than the other.
Now in this particular case it's not terribly important, since the sound of waves is pretty amorphous, and a slight difference between the two parts (96% vs. 100% of original speed) is not going to be noticed. But I would prefer to have a method that would work when such things do matter.
What would be really nice would be the ability to
1. Remove the corrupted audio
2. Fuse/join/recombine the two audio portions
3. Stretch the entire new audio track to match the length of the original video track.
Message was edited by: Kawika808 today is typo day!

How to copy only part of the music media folder and library to another Mac

Dear friends,
I run iTunes in Mac OS. The iTunes music media folder is now located in an external HD because it´s quite large (2T). The problem is that I´got a second Mac and I´d like to copy -in this second Mac, only part of my music using only its internal HD (300 Mb) . How can I do this copy while preserving art and play-lists?
Thanks in advance

tcynk00 wrote:
how I can transfer only selected pieces of music (all library will not fit anyway)
that's what playlists are for.
and how to maintain transfer process in future when I want to change the music on my nano.
add/delete track to/from the playlist you sync to your device.
JGG

How to make only part of a PDF document editable?

I'm looking to see if there is a way to make only part of a PDF document editable. My problem is, I have pieces of collateral that some of our channel partners need to be able to add their logo to and then edit the contact information on them, but we don't want them to be able to change any of the main copy on these documents. The only thing I've been able to come up with as a solution is to create outlines of the text that I don't want editable, but I need the copy to be able to be read by computer systems for disability purposes. Does anyone have any ideas on something I could do for this? Or has anyone dealt with anything like this? Any help would be greatly appreciated!

Hi vward26,
You can use Acrobat to make only part of a PDF document editable.
Kindly refer this FAQ:http://tv.adobe.com/watch/acrobat-x-tips-tricks/how-to-convert-just-part-of-a-pdf-file/
Regards,
Florence

Mail: How to print only part of a message

I often want to print (on paper) only part of a message. I have tried:
1. Select the part to be printed, but the whole message is printed;
2. Do Print > PDF (button) > Open PDF in Preview (button) >Select and delete the part that I don't want > "Message": The original document can't be changed, so a duplicate with your changes has been created" appears at top pointing to an active down arrow and link labelled "Edited" > I click on that link > Dialogue box :" Header text of message", "Where:" (Documents etc. offered).
But I want to print the part of it without the fuss of saving, searching and then printing, then deleting. My task does not seem unusual. Is there a way? Thanks.

OOPS! I just remembered before going on holiday that on advice from somewhere that for security reasons it was a good idea to prevent Java from being used (Safari Preferences). So I did. I have just re-enabled Java and all is well. Whew!
But is enabling Java a security risk (malware)?

Adobe X Pro: How to Delete ONLY the footer?

As far as I can see, I can only delete both the header and footer at the same time. I would like to delete ONLY the footer to add a new one without disturbing the header. I cannot figure out how to do this. The header was created in word, and then the footer was created in adobe after it was converted. I simply want to update this footer I made, but even if i choose the update header/footer option it deletes the header. I don't understand why adobe keeps deleting the header. This happens on any similar document I try it on.
Thanks for any help!

no you can't with the phone but if you use a computer program like iphone backup extractor and transfer the messages to your computer you might get some indication of size. A safe bet is that the messages with pictures and vids are the big ones

How to export only part of animation?

In the case of a big animation (tens of thousands of frames), is there a way to render (using Export Movie) only part of the animation, e.g. frames 100-500 and nothing more? That way, loss of time would be reduced.

Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
Thanks
Steve

How to delete only a portion of the data portal?

This would be similar to DataDelAll() command, but allow only a limited set of data to be removed.
For some background:
- DIAdem 9.1 sp2
- LabVIEW interface calling various DIAdem/VBS scripts
Using DIAdem to format reports based on various scripts and TDM data
results, I would like to be able to load and unload various data files
(TDM) while maintaining the specific report layout (also TDM) data in
the portal. Two (ugly) options seem to be:
a) load entire data result set into the portal (including layout instructions) and process, or
b) keep track of layout state variables and clear portal/reload layout/load next data
This would all be easy if there is a command to enable the right-click delete... behavior of the data portal UI.
Thanks!
James

Hello James,
there are diufferent commands you can use to delete only a portion of the data in the portal. You can delete single channels, a selection of channels, or entire groups with these three commands:
Call ChnDel(ChnArg) - deletes one channel
Call ChnDelete(ClpSource) - deletes a selection of channels
Call ChnSDel(ChnArg1, ChnNo) - delets a number of channels
Call GroupDel(TargetGroupIndex) - deletes a group including its channels
To create a selection of channels as argument for the second command, have a look at the functions
ChnSelAdd, ChnSelGet, ChnSelCount
Regards
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

Rotating only part of a video clip

Hi,
I changed the position of my camera while filming a video clip. Can I now rotate only part of that clip in iMovie, so that all the frames are the same?
Thank you.

You can do this using TransformMovie, available here:
http://www.macupdate.com/info.php/id/21859
Also, MPEG Streamclip can rotate video while maintaining the aspect ratio as well as the interlacing when converting to DV, which is what iMovie prefers as an input:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
There is also a plug-in for iMovie from GeeThree called rotate/scale that might do the job:
http://geethree.com/slick/index.html
You will have to export the clip in question first, then re-import after correction.

How to delete only events I previously imported from .ics files?

I have a very frustrating problem. A few months ago I added a few .ics calendars and merged them with my main calendar on iCal. For example I added a list of dates of baseball games for my favorite team, a list of holidays in Britain, and a few other .ics files.
Then tragedy struck: I synced my Blackberry to my Macbook and iCal and then somehow all the dates on the imported .ics became one day earlier. For example, valentine's day, which should be February 14, is on February 13 on my calendar. And Christmas is on December 24, rather than December 25.
Strangely, all the events that I manually added (such as my business meetings), are correct and were never changed. Only the dates/events from the imported .ics files changed.
I have waited a few months, but the frustration is just too much. I can not easily delete my main calendar, because it literally has hundreds of business meetings spread out over a 6-9 month period.
So my question is this:
a) Is there a way to move all the date back 1 day for only things imported from .ics? All these holidays and events are i a small purple oval at the top of each date, so they are definitely look different than the business meetings I entered, so I hope there is a way to selectively move them.
b) Is there a way to delete all those events and then try re-importing them?
Tks for your help!

Right, I only have 1 calendar. Ok, I did this but nothing seems changed. Here is what I did:
I followed your directions and it ran for about 4 min and I heard my fan starting up and my Macbook slowed. Then things got better and my iCal crashed. I forgot to close it before I ran this I received no error message, but nothing changed in iCal and all the One Day Events were still there.
So I then had the iCal closed, and attempted all steps again. Again it ran for about 4min, things slowed on my computer to a crawl, then got better. Then the Apple error window opened and said again iCal quit unexpectedly (I had not started it in the first place, but I assume the script had to open it to do the work, right?).
So now I'm back where I started -- it seems like the script was doing something but it didn't do anything to my one day events
I REALLY appreciate your help!

How to allow only part of users in AD login sharepoint?

We have a SP2013 farm using windows authentication. On the AD there are 10,000 user accounts and we have no edit permission on AD. (Hence, I cannot setup any group there) As the Sharepoint admin I only have a list of 1,000 users allowed to access. There
is no existing group setup to indicate these 1,000 users.
My question is, how can I allow these 1,000 user login Sharepoint while blocking the other 9,000?
My concern is these 9,000 users will get their My Site self-created when he browse the My Site web application. Another concern is when they access some page without authorization, they will get a form allow them asking for access. The site owner may grant
access to them by mistake which I need to avoid.
Thanks.

Hello Mark,
Regarding the second part of your question. You can uncheck the option 'Allow requests for Access', it is described how in the following thread:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d1e948cf-6289-48f9-9f25-81b57b292c40/how-to-hide-request-access
- Dennis | Netherlands | Blog |
Twitter

How to delete all Messages in B1-Event-Monitor

Hello,
is there a way to delete all Messages from the B1-Event-Monitor.
Now we have:
... But when I try the "Delete All" Function nothing happend, and the Browser hang.
I found this post.B1if db unexplained growth.. and followed all steps.
1)Monitoring->B1 Event Monitor->Switch the log off. Now press delete all button. To clear all the logs.
It is recommended that the B1 Event Monitor is turned on only when debugging& analyzing specific issues. During normal usage, you should switch the B1 Event Monitor off:
2)Maintenance->Cfg Msglog->Click on Manual Delete and provide the appropriate input and press Delete.
3)B1if is handling the message log deletion automatically on the daily bases (B1if -> Maintenance -> Cfg MsgLog -> Daily deletion button). By default it#s set to 23.00. It means the server needs to be up at this time. This value can be set according the customer#s requirement and here you can find more option regarding the message log settings as well. (Kindly check whether Backup buffer(days) is set to 0, if yes check by changing it to 1)
4)Schedule an immediate Transaction-Log Garbage Collect (B1if #> Control Center #> Maintenance #> Schedule TLog GC #> Submit)
5)Open Integration Framework->Control Center->Maintenance->tlog delete->Select the Execution status as "Completed"->submit. Wait for the process to complete.
6)Now restart the Integration service.
Messages are still in the B1-Event-Monitor.
I think our mistake was the LOG-Level ON during all the time.. the daily deletion I switched to 03:00 with 1 day Buffer
Thank you for an Idea.
SAP B1 9.0 PL 12
B1-Integration PL15 = .1.20.8
Regards
Markus

Hi,
You Can use DB Purge tools.
May be it will help you for deleting those data.
You can also view this thread.
http://scn.sap.com/thread/3606618
Thanks,
Tushar

How to transfer only part of the library?

I have over 80GB of music (mainly classical) in my iTunes library and I am using it with my iPod classic. I am planning to buy now a new 16GB iPod nano and my question is how I can transfer only selected pieces of music (all library will not fit anyway)and how to maintain transfer process in future when I want to change the music on my nano.
Thanks for any suggestions.

tcynk00 wrote:
how I can transfer only selected pieces of music (all library will not fit anyway)
that's what playlists are for.
and how to maintain transfer process in future when I want to change the music on my nano.
add/delete track to/from the playlist you sync to your device.
JGG

How to delete only part of an event clip

Similar Messages

Maybe you are looking for