How to delete or change prefs about coloursettings?

FXPX:
In de text/font-caracter-choise department (rightcorner at top) by clicking on NORMAAL you can make a choise and you save the settings you made in three way's. Then it is stored between the other pre-made-settings by fcpx.
Question:
1. how to remove an (self-made) setting or changing the name of it?
2. how to set my preference (self-made) at the top for quick finding?
I did't found anything about this matter in the help.
Thanks for a suggestion!
bruce

From the Finder, hold down the Option key and select Go > Library.
Navigate to Application Support > Motion > Library > Text Styles
There will be two files for each style: one ends in .molo and the other in .png
Delete both to remove the style.
If you want to rename the style, use the style for some text then Save All Format + Style Attributes with the new name. To get the name to "sort" at the top, precede the name with a number.
You can go into the finder afterwards and delete the old style (I think you should probably quit FCPX first before deleting any resources.)

Similar Messages

  • How do I save changes to about:config?

    I change the keyword url in about:config but don't know how to save this change. If just close the tab or the browser, the old settings reappear.
    How do I save changes to about:config?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.com/kb/Preferences+are+not+saved

  • VKOA Custom Table: How to delete or change VKOA Custom Table

    Hi All,
    We have a requirement to create VKOA custom sequence table to include Order Reason in the access sequence. In order to achieve that I have customized a  table and selected : Condition Type, Sales Org and Order Reason. But in the final output I see 2 columns for condition type in One we have to fill KOFI but the other column was mistakenly assigned and not required for our configurations. I tried to delete or change this table but system is not allowing me to do so. Please help me in figuring out a way to change this table so that I can deselt the Condition Type column.
    No real time documents have been posted and we are still in development.
    Your advise will be highly appreciated.

    programmatically, you may use [BAPI_MATERIAL_SAVEDATA|https://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata&cat=sdn_all] [EAN|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=bapi_material_savedata+ean&adv=false&sortby=cm_rnd_rankvalue]
    Regards,
    Raymond

  • How to delete PO change version.

    (I'm creating the thread instead of customer from Intel Corporation)
    PO has active, History and changer version, customers wants to delete the change version of the PO.
    If you need more detials, they will provide further.
    Regards
    Lauren

    In transaction BBP_POC (Change Order) delete the Purchase Order - At least if it says (Change Version). This will delete the change version and restore the previous PO version.
    Regards,
    Robin

  • How to delete the hidden partition (about 35 GB) on my H430 HDD?

    Hello dear sirs/madams
    I want to delete the hidden partition in my H430 desktop. It came with DOS. I am unable to use OneKey Recovery after the reseller installed Windows 7 Ultimate x32. And it is showing the hard disk capacity is 465 GB in my 500 GB HDD. I googled and found that it has a hidden partition. I am unable to delete it using diskpart because it doesn't show the partition. Here's the screenshot of diskpart.
    Link to image
    Please tell me if I can still use OneKey Recovery.
    Please guide me. I am using Windows 8 Pro x64.
    Moderator note: images larger than 50k converted to links per forum rules:  Lenovo Community Participation Rules
    Solved!
    Go to Solution.

    Hello and welcome,
    Have a look at these two links (among many other similar ones The Google found):
    http://www.pcmech.com/forum/computer-hardware/118330-hard-drive-showing-wrong-capacity-heres-why.htm...
    http://en.wikipedia.org/wiki/Gigabyte
    I don't think you have a hidden partition that DISKPART can't see..
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • How do I delete or change my number in my old iPhone, so that I can still use it for iMessages without issue?

    I have an iPhone 4S that was with Verizon. About a week ago I ported into Virgin Mobile and bought a new phone to use until the next iPhone comes out. I now still have my old iPhone, which I want to use for iMessages, as well as like an iPod, etc.
    The issue I am seeing is that my phone number is still registered to my iPhone and I haven't yet figured out how to delete it or change it. The problem this is causing is it is making my iPhone sometimes intercept messages from those with iMessage who are texting my phone number. The messages should be going to my new phone, not my iPhone, since they are texting my phone number (not my iMessage email) and my iPhone has no service connected to it.
    Here's an example of what I'm trying to say: the other day I texted a guy selling an item online. I used my new phone to text him, not my iPhone. He texted me right back, but the text went to my iPhone, not my new phone. We then texted each other via iMessage and no texts were making it to my new phone.
    I think this is also causing some messages to not go through on my new phone either, where I'm just simply not getting texts from people sending me messages. My iPhone isn't getting the messages, nor is my new phone.
    What I need to do is delete my number or put a random number in my phone so that I don't keep missing or losing texts. I saw the ways recommended to disconnect your number from iMessage, but that then kills my ability to use iMessage on my iPhone. There must be a way that the number in my iPhone can be changed or deleted. We are in 2013 I think, and this was something I always had the option of changing via manual programming on every phone I've had since 1902 or so.
    How to do this?!

    I also already deleted my phone number from iMessage on my MBP.

  • IN adobe or conversion to power point how do I delete or change spacing?

    IN adobe or conversion to power point how do I delete or change spacing? 

    I assume you mean saving a PDF to a PPT from Acrobat (Adobe is the company, not the product). What spacing are you talking about? You generally have two choices of the export process, to retain flow and to retain format -- though I have not looked at the PPT export recently. I am not sure what you are asking. If you could post a screen capture and explain, it would help.

  • My apple and itunes id are synched but my icloud is an old apple id and I can't figure out how to delete it and change to current Apple Id. i tried to delete it but I have to have the oassword and the knes I know of are not working. Thanks for any he

    I have an iPad 2 with most recent update 8.1.3. I have been experiencing connection problems, wifi dropping all the time. I get the prompts to enter passwords for iCloud and i Tunes all the time. I finally synched my Apple ID with my iTunes ID but the iCloud is still connected to an old email. I cannot figure out how to delete it as iCloud is not accepting the password I am using. I go round and round with changing passwords, etc. What am I doing wrong? How can I sync everything?

    Hi, Abril_Perez17.
    This may be related to a new feature embedded in iOS7 that shows all purchased music by default.  Go to Settings > Music, then turn off Show All Music.  See if the issue ceases once the feature has been disabled.  This information is located on page 63 of the user guide below. 
    iPhone User Guide
    Regards,
    Jason H. 

  • I setup my android sync account with an incorrect email address. How can I delete or change the email adress or account.

    When I setup my sync account on both my pc and my andriod I left off the 'L' in gmail. I type fast and I do it a lot. Normally not a problem because I get an 'incorrect email' error message. So I synced and everything - went fine. However I have no email account that ties into my sync account. I created a new account on my PC, but am unable to change or delete the account on my Galaxy S3 - operating on android 4.3.
    I have tried to add another Firefox sync account, but it prompts that I can only have one account. I can not delete the account because I can't find that option.

    I deleted the account in Windows 7, but I am unable to figure out how to delete it in the Android 4.3 OS. Please see attached pics.

  • My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

    My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

    If the thief enabled activation lock on the device, then there is nothing that can be done.  Only the password for the Apple ID that it is locked with can disable activation lock.

  • I have an icloud account that i am trying to delete or change the email on it and i lost the password.  How can i delete the account if i lost the password?

    I have an icloud account that i am trying to delete or change the email on it and i lost the password.  How can i delete the account if i lost the password?

    You can't and shouldn't.  This is what you should do:
    http://support.apple.com/kb/HT2204
    http://support.apple.com/kb/HT1920?viewlocale=en_US&locale=en_US
    http://support.apple.com/kb/HT5621
    http://support.apple.com/kb/HT5312

  • How do i change my iCloud account on my iPhone? I want to change it to my husbands so all of our information syncs, but will this completely delete my iCloud account? and by doing this how will my phone change (such as contacts, photos etc.) ?

    I want to change it to my husbands so all of our information syncs on to my iphone and our ipad, but will this completely delete my iCloud account? and by doing this how will my phone change (such as contacts, photos etc.) ?

    Bad idea.
    What information do you want to share, exactly?  You can share contacts, reminders, and calendars with other iCloud users without the need for both of you to use the same iCloud account.  You can authorize both phones to use apps purchased under the same Apple ID without sharing an iCloud account.
    Sharing an iCloud account is a bad idea in general. There is too much opportunity for someone to damage or delete data that will affect both.

  • How to check and delete the change logs for DSO

    Hello All,
    I have build a process chain that will delete the change logs for DSO prior to 7 days but when i executed it, the number of entries are still the same within DSO.
    Then i tried deleting directly from "Environment" menu from DSO maintainance but does not work. Can anyone please explain how to resolve this issue or the proper process of deleting the change logs. Appreciated.
    Thanks,
    M

    Hi
    Check out the below two articles
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1058b68f-96c4-2d10-fbb1-de8757ca6a58?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh

  • How to get informed by email about changes on service messages of the servi

    How to get informed by email about changes on service messages of the service desk.
    I need a kind of overview
    functional details
    and a very good guideline to do the implementation
    Does anyone know how to do it?

    Hi,
    Go throw this
    Note  691303, Note 1041455
    you will find each and every thing abt  implementation .
    Send mail to Message Processor in Service Desk
    Points if helpfull
    Regards,
    Neni

  • How to delete HR Infotype Change log

    Hi,
    I would like to know if there are any means to delete the HR infotype change log. I've already executed the standard program RPUDELPN to delete all the employee records every time an environment is refreshed from the production image, however both the long term and short term infotype change log can still be access. I need to remove those change logs as well to prevent unauthorized access to these confidential data.
    Thanks a lot.
    Francis

    Thanks. However, I'd like to know if I can delete the change documents that were already logged.
    My scenario is that in production environment, we have turn on the logging and change documents are already created. Now we have refresh the development environment with the production images, so I've to delete all the employee records as well as the change documents in order to prevent unauthorized access to these confidential information.
    The standard program RPUDELPN already delete all the employee records but not the change documents. Where and how can I delete both the long and short term document as well?
    Thanks.

Maybe you are looking for

  • Running an ActiveX component wrapped as a Java Applet. How to do it?

    I have a legacy ActiveX/ocx plugin that the client wants to be run as a Java Applet. They think that will make things J2EE compliant. How would you wrap that? are there libraries to help? Thanks in advance

  • Installing ios 5 on ipad

    I need to install ios5 on ipad in order to then install ios7.  I've hooked the ipad up to my computer and it says "to preserve your content, apply update on computer where you sync music, video and photos".  What does this mean?  It also says that I

  • Command line with templet?  Wan't a "Job action" to upload to Youtube.

    I'm looking for a automated way to upload to Youtube. We now have job actions in compressor that will do this but it's not stored in a "droplet". Is there a way from the command line to do this? I'm hoping to create a watch folder that will trip a sc

  • Nokia 6300 stronger battery????

    Hi J have Nokia 6300.My battery is bl-4c. J am wondering if there is stronger battery,but the one that will not harm my phone. Is there a such a thing? Cheers Cortana

  • Video Rendering Error -50

    When ever I try to share my video off of iMovie it says "The share operation has failed, video rendering error -50" I have tried to search up on how to fix this and have found nothing. I am using the latest software update and have iMovie updated. Al