How to delete parked FI documents through FV60

Hi anyone who can help me!
Got a situation where we're using workflow to send out parked FI documents for approval.
In certain cases the documents are being rejected and need to be deleted, but the Document > Delete parked document option in FV60 is greyed out.
Doing SU53s on opening the document is resulting in The last authorization check was successful! so I think we have to rule out auth problems. But now we're at a loss as to why the option is greyed out. I'm starting to think it's related to the workflow but unfortunately I'm not a developer so wouldn't know where to start looking!
Can anyone help? Thanks in advance!
Jen

Thanks Hari / chaituvaleti
Have since worked out it is definitely workflow related. I think the fact that the document has been either released or rejected via workflow means that it can't be deleted (whereas while it's parked and out for approval, it can still be deleted).
Ideally what we want is to be able to delete the document straight from the workflow the user gets after it is released or rejected, rather than having to go into another transaction code or sending it to a WF consultant.
Have asked our workflow developer to investigate the possibility of this - watch this space!

Similar Messages

Deletion parked invoice document

Hi Experts,
I have company code (ausbk), document number (belnr), fiscal year (gjahr ), using these parameters I need to delete parked document.
Please suggest how to write code or function module for deletion parked invoice document.
Thanks & Regards,
Sridhar

Hi,
You can use a BDC for the same. Create a recording using SHDB or SM35 => Recording.
Best regards,
Prashant

Report on Deleted Parked AR Documents with 'Z' status

Hello Experts,
Any suggestion to obtain the list of deleted parked AR documents which did not get posted in the past. We created AR documents and were not sure about VAT treatment and were parked but later managed to invoice the customer separately. Subsequent to this, we have deleted the parked AR document and I know when these parked document gets deleted, document numbers are marked by a letter 'Z' and you can get a report BY DOCUMENT NUMBER. Is there any standard SAP report that can be run BY CUSTOMER to see all deleted parked documents for that customer only.
Appreciate valuable suggestions to achieve the above.
Rgds
CONMJI

Hi,
use S_ALR_87012293 - Display of Changed Documents to check the deleted parked docuements or any status regarding parked document.
Here if you select park doc radio button and give input document type and posting key, then you will get the customer/vendor/GL related docuements . Take that dump and put in the table and give input of your customer code.it will shows those documents if any.
Thanks
ANJI

How to delete an unwanted document?

How to delete an unwanted document?

Windows:
Click it once to highlight it.
Press Shift+Delete.
Click "Yes".
Mac:
Click it once to highlight it.
Press Cmd+Delete(backspace) to send it to the trash.
Right the trash and select "Empty Trash".

How can i send a document through my email with a ipod touch 2nd generation?

How can i send a document through my email with a ipod touch 2nd generation?

https://itunes.apple.com/us/app/id314894105?mt=8
https://itunes.apple.com/us/app/id306273816?mt=8
They have some limitations though. They have paid versions that remove those limitations

FI - How to reverse Park Invoice created by FV60 (No deletion, only reverse)

Hello FI Guru,
I'm a developper, not a functional
For a client, I have created a tool to allow the Park Invoice for every invoices coming from vendor.
For invoices without PO, the park invoice is created by transaction FV60, but some times the user has to "cancel" the park invoice to allow the creation a-of a new park invoice because it was link to a PO.
The goal is that I have to reverse the parked Document (they don't want to deleted it, only a reversing).
How can we do this in FI ?
Wich transaction, wich procedure ?
Thanks a lot.
JC

Hello Jean,
It is not possible to reverse the parked document in SAP as it is not yet posted finally. But you can able to delete the same with the help of FBV0 t code.
Delete parked doc - Go to FBV0 - give co.code, document no,fiscal year details and press enter.
Now go to document tab and click delete parked document option then it will delete the parked document.
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S

When i park a document in FV60 i should get the messages based on conditions;

Hi All,
In FV60 when amount and amount in doc currency is not equal and if i park it should through as error message as 'Posting is possible with Zero balance',i have done this and it is working.
now when amount and amount in doc currency is equal means 'zero' it should succesfully park the document,but i am getting same error message as above.
Can any one please helpme out how to solve this.
Thanks,
Ram

Hi,
do you really think someone could guess with the poor informations you give ??
regards
Fred

How to Post Parked Invoice Document

Hi ,
   Some basic FI functional qry ... How to post the parked invoice document .If any one can give me the transaction code will be great .
Thanks in advance.
Bye
Raj

FBV0.
Below given is the list of all transactions related to parked documents.
[code]
FBV0                 Post Parked Document
FBV1                 Park Document
FBV2                 Change Parked Document
FBV3                 Display Parked Document
FBV4                 Change Parked Document (Header)
FBV5                 Document Changes of Parked Documents
FBV6                 Parked Document $
FBVB                 Post Parked Document
FV50                 Park G/L Account Items
FV53                 Display Parked G/L Account Document
FV60                 Park Incoming Invoices
FV63                 Displayed Parked Vendor Document
FV65                 Park Incoming Invoices
FV73                 Display Parked Customer Document
FV75                 Park Outgoing Credit Notes
[/code]
Regards
Raja

How to delete the subsiquent document for a sales order

Hi,
Please tell me the tcode to delete the subsequent document of a sales order and a sales quotation.I want to reject or delete the sales quotation.
Please tell me the procedure.
Currently i am trying to cancel the billing document for sales order by VF02 and try to cancel through menu bar.
After canceling the document its still giving the message that subsequent document exists.
Please help.
Thanks and Regards

in the document flow : i am finding documents which are given below :
Doc.                                           Date     Overall Processing Stat
Serv. notif. 00015773
Qt For NewConnection 20022016    23.04.08   -   Completed
Order New Connection 22460 23.04.08           -    Open
Z New Connection 90022430 23.04.08      FI doc. not Required
Cancel. Invoice (S1) 90023731 19.07.08    FI doc. not required
And no accounting document created.
Thanks and Regards
Edited by: Birendra Choudhary on Jul 19, 2008 2:08 PM

How to delete one invoice document in FI module!

Hi all,
Does anybody know the T-code to delete a invoice document in FI module.
Thanks in advance!
Best regards,
Wendong Feng

Hi
You can't delete the invoice document. probably you can reverse(cancel) the invoice document using MIRO or MR8M.
Actual deletion can be done only by archiving.
Regards
Mani

How to create shipment cost document through BAPI?

Hi SAP Guru,
My requirement is to create shipment cost document through BAPI.
Is there any standard BAPI to create Shipment cost documents? If any buddy no please help me out.I am in client place i have find out the solution..
Thanks & Regards,
Pankaj Sinha

Hi Pankaj,
See the following link for more help.
IDOC/BAPI for changing Shipment cost number/document
Regards

How to access indesign cs3 document through VC++

Hello
i am new to VC++, i need to communiacte Indesign CS3 through VC++, for this what can i do? inorder to access indesign docuemnts,
i also need to access a Third party API for CS3 through VC++, for the two puproses, i dont have any idea, so
kindly help me
with regards,
ram

Hi ram As Olav has pointed out, you need to decide whether to use COM or SDK. SDK is hard core - and I really mean HARD CORE. I consider myself to be a reasonably good VC++ programmer, but when I tried to develop an InDesign plug-in using SDK and VC++ I was completely lost. However it is possible to use VC++ to control InDesign via the COM object. Here is what you should do: 1) Make a new VC++ project (MFC, MFC Application) 2) In Wizard dialog select Dialog Based and leave everything else unchanged (simply press Next) 3) You now have a simple empty dialog with 2 buttons 4) Double-click the OK button 5) Insert the following code (before OnOK()): // COM support required for this // Call CoInitialize() to initialize the COM library on the current thread if(::CoInitialize(NULL) != S_OK) return; // Create instance of InDesign Application InDesign::_ApplicationPtr app; // Use the appropriate version here // This string will be used to search the registry for the application // associated with it and the same is invoked. // If you have different builds of the same version and you want to work // with a specific build, call CreateProcess() for that build and then // call CreateInstance() so that the currently running instance is returned. app.CreateInstance(L"InDesign.Application.CS3"); // Open existing document InDesign::DocumentPtr doc = app->Open("C:\\InDesign\\myDocument.indd", true); InDesign::PagePtr page = doc->Pages->FirstItem(); InDesign::TextFramePtr textFrame = doc->TextFrames->FirstItem(); textFrame->Contents = "Hello world"; 6) Go to the start of the file 7) Insert the following code before // CAboutDlg dialog used for App About // Required for calling COM initialization methods #include <objbase.h> // Import InDesign's Type Library #import "C:\Documents and Settings\All Users\Application Data\Adobe\InDesign\Version 5.0\Scripting Support\5.0\Resources for Visual Basic.tlb" 8} Build and run the project (F5). When you press OK, InDesign should launch, open your document, find the first page, find the first TextFrame and replace the text (contents) with "Hello world" How to get in contact with your third-party API is a completely different ball game (not in the scope of this forum), but at least you now have a VC++ project with header files etc. If your third-party API is indeed an InDesign plug-in, I totally agree with Olav that you have to direct your questions to the SDK forum. Best regards, Bo

How to delete parts of documents sent to my iPad?

I use an iPad to receive business documents. I want to print them but first I want to delete as much advertising, etc. as possible. How do I do that?

PLEA

How to delete an untitled document on Pages?

When I first downloaded Pages, I opened it to get comfortable with it. When I was done, I tried exiting the software and it prompted me to either "delete", "cancel", or "save" the document, to which I clicked "delete". However, when I right-clicked on the Pages icon on the bottom line I realized the following
I have tried everything to get rid of that "Untitled" document. What should I do?

You deleted the document, it doesn't exist. What you are seeing is a list of recent files opened in Pages. Go to File > Open Recent &, at the bottom of the list, is "Clear Menu." Select that & it will also clear the list in the Dock icon.

How to launch a word document through VC

Hi All,
I have requirement which is as follows:
I need to provide help for the screens of my application for which there are separate word documents which describes the process of using the application.
There are about 6 help documents (MS word). I need to have a "Help" link on every screen. On click of the "Help" link a new window must open and the word document should be displayed. Can the word documents be stored on the server?
How can we achieve this. The Visual Composer version is 7.1
Regards,
Poojith MV
Edited by: Poojith M V on Nov 18, 2009 10:15 AM

Hi Poojith MV,
You can use a Dynamic Web Project to upload documents, images etc. to a J2EE server (i.e. a server that runs VC).
This is done in the NWDS.
You create a new Dynamic Web Project (from the File -> New -> Project... dialog) with an EAR project, copy the documents to the WebContent folder in the Dynamic Web Project, export the EAR project as SAP EAR file and deploy that file to the VC server (configured in Window -> Preferences -> SAP AS Java). Then you can access the file using the Dynamic Web Project name (http://<server>:<port>/<dynamic web project name>/<document name>).
Let me know if you encounter a problem with this method.
Best regards,
Tal.

How to delete parked FI documents through FV60

Similar Messages

Maybe you are looking for