How to delete Process Chain Variant

Hi  all~
I'd like to delete Process Chain Variant .
But I can't find delete menu from RSPC.
It could be easy, but... I can't find it~ ^^;;
Thank you in advance~ ^^;;

Hello,
1. Select the necessary process type from the menu.
2. Type in the technical name of the variant and click change button.
3. When maintenance screen is opened you can delete the variant by clicking delete button.
or
chk the tables for your variants :
RSPCVARIANTATTR
RSPCVARIANT
RSPCVARIANTT
RSPCTRIGGER
Or you can go to maintain variant for any existing variant and choose your variant form the list, delete it.
Regards,

Similar Messages

  • How to Delete Process Chain?

    How to Delete Process Chain?

    When in the change mode of a process chain, choose the menu entry 'Process Chain --> Delete' (Only available on change mode).
      Cheers
       SAP NetWeaver 2004s Ramp-Up BI Back Office Team

  • How to delete Process Chains

    Hi Experts,
    I created Process chain for Deliveries in D sys and transported to P sys. Here we have six source systems so  first we created 6 process chains for each  source systems. Later we decide to add all those variants in one Process chain and we deleted individual process chain and transported to P sys.
    So Process chains are deleted in D system and P system but changes are not effected in P system. Process Chains are not invisible both D & P systems.
    But when we run the Deliveries Process chain, deleted Process chains are also running. And getting Error due to both are scheduled at same time. Because deleted Process chains are still showing in where used list....
    Can any one help me guys!!!!
    Thank you,
    Suresh

    Hi Suresh,
    Can you please let us know what type of scheduling option you have used in the start variant.
    Also please have a check if the start variant in all the chains are the same?
    As per my understanding unless the start variant is triggered the chains will not get scheduled.
    Also there is a bug in Bi7.0, that once the process chain transport has been completed to other environemt its starts getting executed if the start variant hold tha option as Direct scheduling - > Immediate.
    Prathish

  • Deleting Process Chain variants

    I apologize if this answer is already in these forums!  I'm a first timer and I've searched as much as I know how.
    We have created many process chains over the past 2 years which have been tweaked and tweaked.  Whenever I add a new Process type to a chain, I'm prompted for a variant.  I can either pick from an existing, or create a new one.  Our list of existing variants has grown and I would really like to clean up old / unused variants.  I would like to know if there is a way to find out whether a variant is currently used in a Process Chain or not.
    Some of my searches on the forum have retrieved a list of tables associated with Process Chains, i.e. RSPC*.  I'd prefer not to cross-check each step in my chains against this list of 29 tables to determine which is actually used.  I'd hope there's an easier way?
    Thanks!

    Hi:
    You have some options to do this. some are.
    a) In RSPCM, Click on process chain, go into PLANNING VIEW. Now when you edit the process chain (ex: double clicking on the START variant), it will display the variant properties. You can find the delete button on the top, just click on that.
    b) If not, just do a selection criteria (F4) on the variant, select the variant you want to delete and then hit delete.
    Hope this helps.
    Prasith

  • Deleting process chain

    Hello,
    How to delete process chain?

    Hi Roy,
    You will save the chain to reflect changes however when you schedule the process chain you will click on Activate and Schedule(F8) to run the chain..
    Activation will be done when you schedule the chain..
    Thanks,
    Sudhakar.

  • H how to find  if the psa table is included in psa deletion process chain

    Hi all
    can anybody tell me .
    I have a psa table it's technical name is /BIC/B*
    h how to find  the  above psa table is included in psa deletion process chain or not
    please help me

    Hi
    Ope the PC in RSPC1 -->go to planning view of process chain
    in left side you will find different types of process types.
    under other BW process types folder -->you will find process type "Delete request from PSA"
    drag this into your process chain planning view and customize it based on your requirements.
    check the below article for step by step procedure
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh

  • How to find deleted process chain and query

    Hi All
    Some body has deleted one process chain and one query from development system
    how can i know who has deleted these?
    is there any table where deleted process chain and queries will maintain????
    Thanks & Regards,
    Krishna
    Edited by: krishnamurthy g on Sep 1, 2008 5:33 PM

    Hi,
    Usually its totally in tractable to find a deleted chain :
    But you can try out with the following options:
    1> T-code SLG2 .
    2> T-code SLG1 - find out who was logged on to the system on that particular client at that time.
    3> Try out the following tables in se16 :
    RSPCLOGS           --- Application Logs for the Process Chains
    RSPCLOGCHAIN    --- Cross-Table Log ID / Chain ID
    RSPCCOMMANDLOG --- System Command Execution Logs (Process Chains) .
    Hope it will be expedite.
    Thax & Regards.
    Vaibhave Sharma

  • How to collect and move the deleted process chain to Prod.

    Hi,
    I have a process chain (BI 7)that is already in D,Q and P and now I want to delete a Process Chain under "Display Component" and my question is how to collect the deleted process chain to move all the way to Q and P.
    Waiting for your response
    Regards,
    Sunil

    Hi Srinivas,
    Thank You ,I was scared that i dont get any request to collect and my problem is resolved.
    Regards,
    Sunil

  • How to get back deleted Process chain?

    Could some one aid me in getting back the deleted process chain, in production?
    Thanks in advance....

    Hi..................
    It is not possible to get it back...........Since generally we don't create Pc in Production Server.......
    If it exist in you Development or Quality Server.............again transport it from there....
    Regards,
    Debjani..........

  • How to activate the deleted Process chain

    Hello Experts,
    Unfortuantely we have deleted few process chain by in RSPC .But we are in need of this Process chain . Could you please let us know whether there is any possibilties to get back the deleted process chain .
    Please let us know where the deleted process chains are stored in the system.
    Many Thanks for your Help.
    Regards,
    Kumar

    Hi,
    you can restore it from a backup or in case the chain was transported from one of the target systems or the development system. No other way.
    regards
    Siggi

  • How to find process chain using background job in sm37

    How to find process chain using background job in sm37

    Better is to select the job.
    Select (Define) Step (s) or F6.
    Select the line and Menu Goto>Variant.
    The variant contains the name of the CHAIN and its VARIANT.
    Success
    We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
    We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
    We could not find the scheduled job via SM37.
    Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
    We delete these entries via function BP_JOB_DELETE....
    Edited by: Jack Otten on Jul 9, 2010 2:50 PM

  • Error in process chain variant

    Hi all.
    I get an error "Variant ALL is not persistent" when I try to add the "Adjustment of Time-Dependent Aggregates"(TIMCHNGRUN) process type to mye process chain. The error message is RSPC023. I am unable to change the variant, or create a new one. I get the same error if I try.
    I suspect that this variant is corrupt or something like that. Any help on this one?
    Regards
    Oyvind Reinsberg

    Hi,
    Thank you for your reply. But how can I delete a process chain variant?
    Regards
    Øyvind Reinsberg

  • How to stop process chain, if it is taking too much time than expected.

    Some times if a process chain takes to much time to finish than expected, how I can stop the process chain and execute it again.
    Thanks in Advance.
    Harman

    how I can stop the process chain ??
    If the job is running for a long time ,
    1)GOTO RSMO and SM37 and check the long running job over there.
    2)There you can see the status of the job.
    3)If the job is still running you can kill that job
    4)delete the failed request from data target.
    for more details go to this below link
    how to stop process chain if it yellow for long time
    how I can execute it again ?
    GOto Function module  RSPC_API_CHAIN_START
    and give u r process chain name there.and execute.

  • How to change process chain in SAP APO, in RSCP tcode.

    HI SAP APO Experts
    I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
    I dont have any idea how to change process chain.
    Could you please help me how to change process chain in SAP APO in RSCP tcode.
    Appreciate your help or comments.
    Sandeep..

    Hi Sandeep,
    The t-code RSCP does not exist in SAP APO.  The correct t-code is RSPC. 
    Step 1:- In RSPC t-code, select the process chain which you need to change. 
    Step 2:- Double click on it. 
    Step 3:- It will display the various programmes attached to the process chain.  Go to change mode by clicking on the change indicator (Control + F9)
    Step 4:- Select the programme area where you need to do the correction or change.  Double click on it.
    Step 5:- It will take you to the programme and its selection contents.  Make the relevant changes.  You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
    Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
    Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
    Regards
    R. Senthil Mareeswaran.

  • How to create process chains,and how to use process like and or xor

    Hi,
    How to create process chains,and how to use process like and or xor.
    can any one please give me a example in each.
    Thanks,
    cheta.

    Hi Cheta,
    Here is step by step procedure to create process chains
    Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
    Creating Process Chains
    Prerequisites
    If you want to include a load process in the process chain, you need to have already created an InfoPackage.
    You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
    Creating Process Chains
    You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
    Creating a Process Chain Directly in the Process Chain Maintenance Screen
    You are in the BW Administrator Workbench.
    1. Click on the Process Chain Maintenance icon in the AWB toolbar.
    The Process Chain Selection dialog window appears.
    2. Choose Create.
    3. Enter the technical name and a description of the chain, and confirm your entry.
    The Add Start Process dialog window appears.
    4. Create a variant for a start process.
    1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
    2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
    The Maintain Start Process screen appears again.
    3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
    You are taken to the Plan View of the process chain maintenance screen.
    In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
    5. Use the drag-and-drop function to add the relevant processes into your process chain.
    You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
    Hope this helps
    Regards
    Karthik

Maybe you are looking for