How to Delete Process Chain?
How to Delete Process Chain?
When in the change mode of a process chain, choose the menu entry 'Process Chain --> Delete' (Only available on change mode).
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team
Similar Messages
-
Hi Experts,
I created Process chain for Deliveries in D sys and transported to P sys. Here we have six source systems so first we created 6 process chains for each source systems. Later we decide to add all those variants in one Process chain and we deleted individual process chain and transported to P sys.
So Process chains are deleted in D system and P system but changes are not effected in P system. Process Chains are not invisible both D & P systems.
But when we run the Deliveries Process chain, deleted Process chains are also running. And getting Error due to both are scheduled at same time. Because deleted Process chains are still showing in where used list....
Can any one help me guys!!!!
Thank you,
SureshHi Suresh,
Can you please let us know what type of scheduling option you have used in the start variant.
Also please have a check if the start variant in all the chains are the same?
As per my understanding unless the start variant is triggered the chains will not get scheduled.
Also there is a bug in Bi7.0, that once the process chain transport has been completed to other environemt its starts getting executed if the start variant hold tha option as Direct scheduling - > Immediate.
Prathish -
How to delete Process Chain Variant
Hi all~
I'd like to delete Process Chain Variant .
But I can't find delete menu from RSPC.
It could be easy, but... I can't find it~ ^^;;
Thank you in advance~ ^^;;Hello,
1. Select the necessary process type from the menu.
2. Type in the technical name of the variant and click change button.
3. When maintenance screen is opened you can delete the variant by clicking delete button.
or
chk the tables for your variants :
RSPCVARIANTATTR
RSPCVARIANT
RSPCVARIANTT
RSPCTRIGGER
Or you can go to maintain variant for any existing variant and choose your variant form the list, delete it.
Regards, -
Hello,
How to delete process chain?Hi Roy,
You will save the chain to reflect changes however when you schedule the process chain you will click on Activate and Schedule(F8) to run the chain..
Activation will be done when you schedule the chain..
Thanks,
Sudhakar. -
H how to find if the psa table is included in psa deletion process chain
Hi all
can anybody tell me .
I have a psa table it's technical name is /BIC/B*
h how to find the above psa table is included in psa deletion process chain or not
please help meHi
Ope the PC in RSPC1 -->go to planning view of process chain
in left side you will find different types of process types.
under other BW process types folder -->you will find process type "Delete request from PSA"
drag this into your process chain planning view and customize it based on your requirements.
check the below article for step by step procedure
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh -
How to find deleted process chain and query
Hi All
Some body has deleted one process chain and one query from development system
how can i know who has deleted these?
is there any table where deleted process chain and queries will maintain????
Thanks & Regards,
Krishna
Edited by: krishnamurthy g on Sep 1, 2008 5:33 PMHi,
Usually its totally in tractable to find a deleted chain :
But you can try out with the following options:
1> T-code SLG2 .
2> T-code SLG1 - find out who was logged on to the system on that particular client at that time.
3> Try out the following tables in se16 :
RSPCLOGS --- Application Logs for the Process Chains
RSPCLOGCHAIN --- Cross-Table Log ID / Chain ID
RSPCCOMMANDLOG --- System Command Execution Logs (Process Chains) .
Hope it will be expedite.
Thax & Regards.
Vaibhave Sharma -
How to collect and move the deleted process chain to Prod.
Hi,
I have a process chain (BI 7)that is already in D,Q and P and now I want to delete a Process Chain under "Display Component" and my question is how to collect the deleted process chain to move all the way to Q and P.
Waiting for your response
Regards,
SunilHi Srinivas,
Thank You ,I was scared that i dont get any request to collect and my problem is resolved.
Regards,
Sunil -
How to get back deleted Process chain?
Could some one aid me in getting back the deleted process chain, in production?
Thanks in advance....Hi..................
It is not possible to get it back...........Since generally we don't create Pc in Production Server.......
If it exist in you Development or Quality Server.............again transport it from there....
Regards,
Debjani.......... -
How to activate the deleted Process chain
Hello Experts,
Unfortuantely we have deleted few process chain by in RSPC .But we are in need of this Process chain . Could you please let us know whether there is any possibilties to get back the deleted process chain .
Please let us know where the deleted process chains are stored in the system.
Many Thanks for your Help.
Regards,
KumarHi,
you can restore it from a backup or in case the chain was transported from one of the target systems or the development system. No other way.
regards
Siggi -
How to find process chain using background job in sm37
How to find process chain using background job in sm37
Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM -
How to stop process chain, if it is taking too much time than expected.
Some times if a process chain takes to much time to finish than expected, how I can stop the process chain and execute it again.
Thanks in Advance.
Harmanhow I can stop the process chain ??
If the job is running for a long time ,
1)GOTO RSMO and SM37 and check the long running job over there.
2)There you can see the status of the job.
3)If the job is still running you can kill that job
4)delete the failed request from data target.
for more details go to this below link
how to stop process chain if it yellow for long time
how I can execute it again ?
GOto Function module RSPC_API_CHAIN_START
and give u r process chain name there.and execute. -
How to schedule Process chains in Bi Admin Cockpit
Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please adviseHi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona -
How to change process chain in SAP APO, in RSCP tcode.
HI SAP APO Experts
I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
I dont have any idea how to change process chain.
Could you please help me how to change process chain in SAP APO in RSCP tcode.
Appreciate your help or comments.
Sandeep..Hi Sandeep,
The t-code RSCP does not exist in SAP APO. The correct t-code is RSPC.
Step 1:- In RSPC t-code, select the process chain which you need to change.
Step 2:- Double click on it.
Step 3:- It will display the various programmes attached to the process chain. Go to change mode by clicking on the change indicator (Control + F9)
Step 4:- Select the programme area where you need to do the correction or change. Double click on it.
Step 5:- It will take you to the programme and its selection contents. Make the relevant changes. You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
Regards
R. Senthil Mareeswaran. -
How to create Process chain in BI 7.0
hi,
I dont know how to create process chain in BI 7. If any one have document step by step process to create process chain. help me. thank u.check these links..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171
http://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae
http://wiki.sdn.sap.com/wiki/display/BI/FiveWaystoEnhanceBIFunctionalityUsingABAP--PartV--ABAPinProcess+Chain -
How to create Process chain for Aggregate for Master data
Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please adviseHello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf
Maybe you are looking for
-
My daughter's ipod touch is password locked and attached to a computer that doesnt exist anymore. i want to authorize it to my computer itunes account but itunes wont even read it due to the password failure. what can i do?
-
Firefox does no longer display the Firefox Sync status
I'm running FF 3.6.7 and FF Sync 1.4.1. Now the display from the taskbar has gone missing.
-
Using and creating UI Standards
Hi, I am writing after finding that there need to be some universal standards for the UI design. at times there are application specific standards but still we should develope a document which should consists of standards used by developers around so
-
Using Elements 11, what's the best tool and way to do a detailed selection of an image with hair (a dog)?
-
Error when using Solution database
dear all, i have some problem when i using the solution database we have abap runtime error : Runtime Error RAISE_EXCEPTION Exception condition "LEXICON_DOES_NOT_EXIST" raised.