How to delete released transport request

Gurus,
We are doing a system synchronization and for that we are going to make a system copy from BWP TO BWD. Hence I am told to delete all modifiable transport requests, which I did without any problem.
But in BWQ there are some transports which are already released and how I can delete them. They don't show under modifiable transports , rather they show under released transports.
(For your information in my company any transport released from BWQ does not automatically go to production, we have to send a manual e mail request with the transport # to basis. Therefore these transports even though they show released they will never make it to production as I have never sent release request to basis and these transport are of no use any ways.
So please guide me how to delete these released transports in BWQ.
Thanks
MK

Hi MK,
Goto Import queue of target system(T Code: STMS) and delete(Shift+F2) from import queue. or from menu --> Request --> Delete.
In this way it only deletes from import queue.
Hope it Helps
Srini

Similar Messages

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

How to delete unreleased transport request where the objects are locked

Hi Experts,
I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

Is it is possible to delete released transport requests...

Hi Experts,
I had created transport request and it is released, moved to quality with errors. I dont know why I am getting errors while transporting the request, Now I am creating another transport request. Is it any possibility to delete released transport request or is there any solution for this. why I am getting errors while transporting from dev to quality.
Thanks & Regards,
RAJ

HI,
Its not possible to delete the released transport request. You should have to follow transport procedure .
T-code for Transport Connection- Check in SE09/se10 for creating requests.
For collecting objects you have go Transport connection without missing the objects.
SE03 for checking the Request objects.
Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
Thanks
sudhakar.

Delete Release transport request

Hi Gurus,
I need to delete a transport request which is already release. Please let me know what is the best way to do that.
Thanks
Liza

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

How to delete a transport request once it is been realised.

Hi Gurus,
I need to delete the object from the existing transport request which is already been released and create a new transport request to transport. Is this options possible.
With Regards,
Shakthi.

- You cannot delete a released transport request, but you (or Basis team) can remove it from the import queue in the following systems (starting with quality) (STMS)
- Then you could also via transport tools add the objects of the released request in a new request, there remove the (no longer wanted) object of the new request and release/transport this new request.. (SE03 - Look for "Merge Object Lists")
Ref : [Working with the Transport Organizer|http://help.sap.com/saphelp_nw04/helpdata/EN/57/38e14e4eb711d182bf0000e829fbfe/frameset.htm]
Regards,
Raymond

How to delete a transport request easily?

Hi Gurus,
I need to delete a transport request. Unfortunately, I received an error that says
"Request/task BWDK903562 cannot be deleted because it contains locked objects".
So, in order to delete that transport request, I have to first delete all objects contained in that request. However, there are just too many of them if I were to do it manually one-by-one.
Is there any approach where I could delete this transport request easily without first deleting all objects contained in that request?
Thanks you in advance.

Hi Fulham,
A transport request cannot be deleted with locked objects. So you have to first unlock the objects in the request. To do this: SE03 --> Request Task --> Unlock Objects.
The in SE10 select the request you want to delete and expand. Then right click on the sub node of the request and delete. Then Select the main request and delete.
Hope this helps.
Bhargava

How to delete the Transport Request release from SE09

Please let me know How can I delete the New Transport release request from SE09 and if I HAVE OBJECTS SUCH AS Process chain and process variant, infopackage in one request. Being A NEW request it has Delevelopment correction ABDK904193 under main request ABDK903667, should I double click on ABDK904193 FIRST AND then go to request editor and change - display and select all request and delete it and save and then delete main request ABDK903667. If I do this will there be any problems on Process chain Objects such as locking or unlocking. let me know if there are any more steps that need to be taken to avoid any trouble.
hope u will help me asap
thanks
hardeep

Hi Hardeep,
Allways delete child node and then parent node.Coz Parent node does not allow you to delete straight away so first delete child node either by double clicking and select all>>delete or individually select each object by placing cursor on it and say Delete by pressing the Delete Icon..it will prompt u message obj is locked press delete that will delete the object, subsequently when all objects are deleted then delete the request also.
when u delete a request all the objects saved or locked onto that request are released or unlocked.
So all the objects that were previously locked or saved onto a req are now ready to save into another req.
Simply say, once the objects are deleted from the req they are independent again with latest changes and readily available to save onto a diff req.
another option is release the req but do not transport it to target system.
Regards
Ellora

How delete the Transport request in Development system

Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.

hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin

Urgent Correction: Release transport request (transport is red)

Hello!
Has some one experience to solve the problem bellow:
By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
AGR_1016 table class is 'C'. Entries are only imported to client '000'.
AGR_1016B table class is 'C'. Entries are only imported to client '000'.
AGR_PROF table class is 'C'. Entries are only imported to client '000'.
AGR_USERT table class is 'C'. Entries are only imported to client '000'.
AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
Main import
End date and time : 20071115141115
Ended with return code: ===> 8 <===
The question is:
I would like to copy some existing role to cutomer's namespace Z... save the rolle and transport the role via CharM.
Is it usual to get the error I get?
Thank you very much!
regards
Thom

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

How can i delete a transport request?

Hello:
I only speak a little english. I wait that you can understand me.
I have a transport request that is released. I make bad this request and i need delete it. But, when i go to se10 and I try to delete I recive this messagge:
Request/task ____ already releaded (not modificable).
How can I delete this request?
Thank you very much.
Report RDDIT076 is internal and should not be executed by customers.
- Reported by Jason ORiordan
Message was edited by: Suhas Saha

Hi,
It is easilly possible to delete the cofile and the datafile of the released transport request but why would you need to do that ?
It is also possible to delete a transport request in the transport tables but it is a very bad idea and could even be seen as a temptative to hide a forbidden action in the system.
It will be seen by a security audit as this would create a hole in the request order numbering.
You would need to use direct database access to delete a released transport request.
As I told you before, I would NOT do it as it is hasardous et may generate security audit problems.
You can also destroy your transport system.
Transport requests are stored in table E070.
We only modify the e070 table after system copy by database refresh to reset the next transport request number. It is done by inserting a line in the table. We never delete inside this table.
Use at your own risk !
Regards,
Raj.

How to release transport request

Hi,
Good Morning!!!!!!!!!!!!!!!
How to realease the transport request?,in that one rquest is header in that one one more task number is there.
can u help me,this is very urgent,
please send step by step procedure.
very urgent.please
Yours
srilatha

Hi,
1) first u r collected objects should be in transportable package(not in $TMP)
then u check in SE09 which are the objects u r collected those things are avilable in that request or not if not there once again u should collect before transport and check that request if any locks are there if there release in SE03
2) now in SE09 first u relase the task(subordinated one) then release the request.and u can see that request in imported server in tcode of STMS.
Thnaks & Regards
sathish

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

Is it possible to delete a released transport request

Hello
I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

You can but you have to chnage status of the request:
Use transaction SE38 or SA38 and run program: RDDIT076
Set your request number and run the program
After request is shown double click on it
You should be able to change status from R to D
And now, you can delete the transport for example in transaction: SE10...
Help on ABAP: Few Tips for Transport Request Manipulation

To delete the transport request.

when i'm trying to delete the transport request by using se09, it responses with " Request/task BWDK916118 cannot be deleted because it contains locked objects." That request is created by me. It showing same name but it will not allow me to delete. Please help to delete how to delete that request.
Thanks
Satish

Hi..
Basically you are getting this messge because first you have to delete all the objects of the underlying sub requests and then the subrequests ......then finally the actual request.................
Secondly, it is better to unlock all the objects first so that you can delete all the objects at a time..............because if you have to delete all the objects one by one.....and if each requests contains 100s objects then it is very tedious to delete all the objects one by one...
Go to SE03 --> There you will get the options "Unlock Objects (Expert Tool) " --> Click over there --> give the subrequest nos and unlock it....
Then go to SE01 --> Click on "Objects" tab --> You will get the change button --> click on it --> Select All and Delete at a time...
Regards,
Debjani..

How to delete released transport request

Similar Messages

Maybe you are looking for