How to delete self defined "Swatches"?

I work with Adobe Design Std CS5 Illustrator (German version), newly installed - not migrated from an older model! - on iMac27, i7, SSD and OS X 10.8:
German: Ich habe viele eigene Farbpaletten (Farbfelder) unter "Benutzerdefiniert" gespeichert. Ich kann diese von dort auch laden, kann aber die überzähligen "Paletten" nicht löschen, da ich den Order "Benutzerdefiniert" oder die entsprechenden Dateien unter "Adobe Illustrator/Vorgaben/de_DE/Farbfelder (oder Swatches)/..." (Angaben gemäss Hilfe) nicht finden kann. Ich sehe nur die von Illustrator vorgegebenen Paletten. Liegt nun Illustrator Hilfe falsch oder liegt das Problem bei Apple OS X 10.8?
English: I have created my own "Swatches" (Farbfelder) and saved (too) many of them.
Now I want to delete the majority, but I cannot find the directory "Benutzerdefiniert" or "User created?" on the path as hinted by the Illustrator Help (German version: Adobe Illustrator/Vorgaben/de_DE/Farbfelder). I only find the various Color Collections stored during Illustrator installation.
Are Illustrator procedures to blame - or again Apple OS X 10.8 (Mountain Lion) intricacies?
Apple started to confuse even long term users with Snow Leopard (OS X 10.6). Every new version offered many surprises or caveats and endless calls to Apple...
Shall I reinstall Illustrator and create the user defined "Swatches" again from the relevant Illustrator files? A sledge hammer method...

Thank you 1.craighead, but you misunderstood. I should be more specific: as I have the German Version it is hard to find correct terms for the English Version. In the German Version the terms "Farbfelder"(Swatches) und Farbfeldbibliotheken"(Swatch Libraries) are not consistently distinguished in Illustrator Help
What did I do? In my CS5 German Standard Version I saved self-defined Swatch libraries (Farbfeldbibliotheken) the usual way and they are obviously stored under "Benutzerdefiniert (User specified?) as suggested in Illustrator Help.
What can I do? I can activate such self-defined Swatch Libraries.
What is my problem? I cannot delete obsolete "Swatch Libraries" neither using the dialogs within the Swatch Window (Fenster Farbfelder) nor delete them from the subdirectory "Benutzerdefiniert" (User defined?) using Mac OS X 10.8 Finder. (Self defined Swatch Libraries are saved under "Adobe Illustrator CS5/Vorgaben/de-DE/Farbfelder/...").
I ask again: Did I ignore obvious possibilities? Are Illustrator procedures to blame - or again Apple OS X 10.8 (Mountain Lion) intricacies?
I have not yet reinstalled Illustator CS again ....

Similar Messages

How to delete user defined swatches in adobe illustrator CS6?

I'm trying to delete swatches that have been saved as User Defined but i'm unable to locate the local file to do it.
Any help would be greatly appreciated.

It's in your user folder, inside App Data
Where Can I Find Application Data folders in Windows 7? - Microsoft Community

How to delete all color swatches?

How can one delete all color swatches in a palette, or delete all "unused" swatches, such as one can do with Muse?
Or: how can one create a new set of swatches, that would be blank?

I believe you can do it in the Presets Manager.

How to use self-defined class in a jsp page

Hello:
I defined a class for displaying purpose, which is in the different folder(WEB-INF/classes) from my JSP page.
In my JSP page, I want to create an instance of my class and display something, while I get the following error: "
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 12 in the jsp file: /htmls/templateIntro.jsp
Generated servlet error:
[javac] Compiling 1 source file
/home/jiao/jsp_webserver/tomcat/work/Standalone/localhost/syllabus/htmls/templateIntro_jsp.java:72: cannot resolve symbol
symbol : class Display
location: class org.apache.jsp.templateIntro_jsp
Display display=new Display(out);"
How can I solve this problem? Should I redefine my classpath or there are some other actions I should take.
T.I.A.
Oriental Spirit

Here is what I have done:
1) in Display.java, add one line "package tools;" on the top, and compile it to
create Display.class.
2) create a new folder at
/home/jiao/jsp_webserver/tomcat/webapps/syllabus/WEB-INF/classes
named tools and then put the Display.class into the newly created folder.
3) in my jsp page, add " import="tools.*"
But it still doesn't work.
Any ideas? T.I.A.

How to delete system-defined attributes (e.g. author...)?

As title.
I can't find any ways to delete those system defined attributes like author, description and etc.
Thanks.

Thanks for your quick response. Which tool (iTunes?) would you recommend to use on the PC (Windows 7) to select the photos I want to delete?

How to pass self-defined message to Monitor

Hi all,
i am asked to define several Exception situations and pass the message to monitor if any of the exception situation occurs. Can anyone give me a sample code?
This is what I wrote, but it didnt work... please help! Thanks!
Message Z***** (message ID)
 001 : *****. (message number and text)
 002 : *****
 003 : *****
 004 : *****
 005 : *****.

Hi Linda..
Use like this:
Either declare the Message id at the top of the report:
REPORT zxxxxx
MESSAGE-ID <msg id name>.
Else, you can use the message id in the message too..
MESSAGE <message type> <message no> (<message id>) WITH text.
Where, message type can be E, I, W or S.
For ex. MESSAGE E999(ZZ) WITH 'Incorrect entry'.
Thanks and Best Regards,
Vikas Bittera.

How to disable self defined button from ALV Toolbar when ok_code ='BACK'

here is the code
CLASS Z_CL_6_U_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
 METHODS:
 HANDLE_TOOLBAR
 FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
 IMPORTING E_OBJECT E_INTERACTIVE,
 HANDLE_USER_COMMAND
 FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
 IMPORTING E_UCOMM.
ENDCLASS.
CLASS Z_CL_6_U_EVENT_RECEIVER IMPLEMENTATION.
METHOD HANDLE_TOOLBAR.
DATA: LS_TOOLBAR TYPE STB_BUTTON.
IF G_FLAG = 'X' and ok_code = space.
 CLEAR LS_TOOLBAR.
 MOVE 0 TO LS_TOOLBAR-BUTN_TYPE.
 MOVE 'UPDATE' TO LS_TOOLBAR-FUNCTION.
 MOVE ICON_MODIFY TO LS_TOOLBAR-ICON.
 MOVE 'Update Records'(111) TO LS_TOOLBAR-QUICKINFO.
 MOVE ''(112) TO LS_TOOLBAR-TEXT.
 MOVE ' ' TO LS_TOOLBAR-DISABLED.
 APPEND LS_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
elseif ok_code = 'BACK'.
 CLEAR LS_TOOLBAR.
LS_TOOLBAR-function = 'UPDATE'.
LS_TOOLBAR-butn_type = 0.
LS_TOOLBAR-icon = ICON_MODIFY.
LS_TOOLBAR-quickinfo = 'Update Records'.
LS_TOOLBAR-disabled = 'X'.
append LS_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
ENDIF.
ENDMETHOD.
ERROR COMES when ok_code is 'BACK'.
at this point E_OBJECT has null reference instead of ref to Class cl_ALV_EVENT_TOOLBAR_SET.
tell me why this error coming.
pls help

Hello Neetu
To give you an example I have copied sample report BCALV_GRID_DEMO, added some code (search for $Comment) and modified the GUI-status MAIN100 (replace function code EXIT with BACK for the F3 function).
Run the program and push several times the BACK button: one toolbar function after the other will be inactivated.
PROGRAM test.
DATA: ok_code LIKE sy-ucomm,
 gt_sflight TYPE TABLE OF sflight,
 g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
 grid1 TYPE REF TO cl_gui_alv_grid,
 g_custom_container TYPE REF TO cl_gui_custom_container.
----
 CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-DATA:
 md_cnt TYPE i.
 CLASS-METHODS:
 handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
 IMPORTING
 e_object
 e_interactive
 sender.
ENDCLASS. "lcl_eventhandler DEFINITION
 CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_toolbar.
 DATA:
 ls_button TYPE stb_button.
 ADD 1 TO md_cnt. " a simple counter
 LOOP AT e_object->mt_toolbar INTO ls_button FROM 1 TO md_cnt.
 ls_button-disabled = 'X'.
 MODIFY e_object->mt_toolbar FROM ls_button.
 ENDLOOP.
ENDMETHOD. "handle_toolbar
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
* MAIN *
SELECT * FROM sflight INTO TABLE gt_sflight.
CALL SCREEN 100.
* MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
 CREATE OBJECT g_custom_container
 EXPORTING container_name = g_container.
* Instantiate ALV grid control
 CREATE OBJECT grid1
 EXPORTING i_parent = g_custom_container.
 CALL METHOD grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = 'SFLIGHT'
 CHANGING
 it_outtab = gt_sflight.
*$Comment: Set event handler for event TOOLBAR
 SET HANDLER:
 lcl_eventhandler=>handle_toolbar FOR grid1.
ENDIF.
ENDMODULE. "PBO OUTPUT
* MODULE PAI INPUT *
MODULE pai INPUT.
* to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
 WHEN 'EXIT'.
 PERFORM exit_program.
 WHEN 'BACK'.
$Comment: Toolbar can be modified on-the-fly
 grid1->set_toolbar_interactive( ).
 WHEN OTHERS.
* do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
* FORM EXIT_PROGRAM *
FORM exit_program.
* CALL METHOD G_CUSTOM_CONTAINER->FREE.
* CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
Regards
Uwe

How to delete myself built disk image

How to delete self built disk image?

If the image is open (you'll either see the image's disk icon on the desktop or in the left pane of the Finder window) close it. Then put the image in the trash and empty. If you don't close the image it can't be trashed.

How To Delete All Colors In a Swatch Palette?

If I wanted to create a new swatch palette without the preset colors being there, how can I delete all the swatches at once. I know how to delete each color individually but, is there a way to clear the palette?
TIA
knightball

I believe you can do it in the Presets Manager.

Self defined type how to create value attribute

Hello!
How can I create a new context "value attribute" if its
type is doesn't exist in the drop down list
where you can choose either a primitive data types
or a java Type. It is an self defined class.
It's name is "Notebook". I want to bind all the Notebooks
with a value attribute. The method returns a Notebooks-Array.
How can I deal in such cases?
Regards
sas

Hi,
You need to put your java file inside src-->your package. As you said it is already there, then try to reload and rebuild your project. It must show in the java native types when you browse.
Even check the package statement of your java file.
thanks & regards,
Manoj

How to raise a self-defined event with parameters in program

Hi,all,
I want to raise a self-defined event with parameters in one of my method ,how to do that?Thanks

Hi Ray,
If your event name is MYEVENT and the parameter name is MYPARA and the value you want to pass to this parameter is L_PARAVALUE, use the following -
wd_this->fire_myevent_evt( mypara = l_paravalue ).
If the event is to be raised in an a view, then you need to get the component controller instance first and use it instead of wd_this.
Also, this can be obtained directly by clicking on the WD Code Wizard ->Radio button for raise event->selecting your event.
Regards,
Neha
PS:Reward if helpful

Problem with Self defined info structure.

Hi All,
We have Create some Self define Info structure Like ;--
S061 Location and Planning               --->S501
S062 object class and manufacturer --->S502
S063 Danage analysis                        --->S503
S065 Object Statistics                         --->S504
But probleme is when we excute S501 self defined info structure heading comes as
Standard Analysis for Info Sstructure S501: Selection where as in Standard it is coming as Location Analysis: Selection
Any one can tell how can i solve this probleme.
Thanks
Vinit

steps to create own infostructure by copying standard infostructure.
steps.... 1) First Create your own info structure using menu path SPRO> Logistics general > LIS > Logistics data warehouse > Data basis > information structure > maintain self defined ino structure Here create a New stucture called S901 (Follow Custom defined structure naming conventions) for application 07, by copying S115 .
Once inside this Choose the Charateristic button below and CHOOSE SELECTION LIST.
This will popup a list of fields that can be added to the structure for analysis per field catalogue.
Navigate to the notification Object field catalog to select the Order number.
Select other field as appropriate from other field catalog and copy them.Then select or de-select the "Key figures" thats relevant for your needs Check ,generate and activate the same structure and save.
2) Create Update rules for updating this info structure by copying the rules of S115.
SPRO> Logistics general > LIS > Logistics data warehouse > Data basis >Updating > Specific definition using update Rules > Maintain update rules.
Enter the newly created Structure name and choose teh Update group 26 (use drop down) and enter the S115 and 26 as teh group and rules to copy from.
Delete the rules thats not relevant for your needs and then check, and Choose "generate: and then activate the "UPDATING" and save.
3) Activate the Update type for the new structure. SPRO> Logistics general > LIS > Logistics data warehouse > Data basis >Updating > Update Control > Activate Update.
Choose PM and double click on the new structure that you had just created and chosoe Period and Type of updating (2: Similar to other standard info structures). and save.
This should start updating New orders that you are creating from Now on.
However if you would like to pre-populate existing data in this structure for analysis, then you would have to run through the generation program in background for this specific structure.
SPRO> Logistics general > LIS > Logistics data warehouse > Data basis >tools > setup of statistical data >Application specific setup of statistical data > perform setup - PM.
Here make sure to do the PMIS statistical setup (This might be redundant, if you havent changed any value category that updates PMCO table) and Set Up: Plant Maintenance IS(Make sure to choose your specific structure).
You should be able to check the table entries to confirm that the program has updated the table (Name of the info structure).
The defaulted version could be different from the standard version (000).You could copy the data from one verion to another version using the first step in this block.
Once the genration is complete you should be ready to use this structure using MCIS transaction (PMIS > Standard analysis > User defined analysis).
This will list out all the user defined structures and you can pick and execute the one that you had just created.
Regards
Dhiren
Edited by: Dhiren Kumar Sahoo on Feb 2, 2010 3:55 PM

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the data from partition table

Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree

874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right.

How to delete self defined "Swatches"?

Similar Messages

Maybe you are looking for