How to delete several inspection plan

Hi every body,
I need to delete 4000 inspections plan, but I don't know how I can do it?
Somedody could help me?
I try tcode QSR6, but this tcode delete just one inspection plan!!
tHANK for any help.
Cdt
Kari

Thanks for you tcode but do you try it?
I don't know how to use it?
How I can to delet inspection plan?
Coul you help me, please?

Similar Messages

  • How to block deletion of Inspection Plan

    Dear Experts
    Accicendatally, our users are deleting the Inspection Plan,
    Is there any authorisation object to make Restriction on this,Transaction is QP02.
    Regards
    Sandeep patil

    Hi Sandeep,
    As you said User's are deleting inspection plans. They must be putting it for deletions by clicking on deletion flags.
    If you want to restrict this then you have to get help of security team. They will find role for this transaction -
    > then they will find out the objects matanined in this role -
    > this will display all the activities in that object -
    > then they can cancel deletion activity from object list.
    Then when User will access QP02 then this checkbox will appear grey. Then they will not be able to delete inspection plan.
    Hope this resolves your issue, reward points if helpful.
    Regards,
    Avinash.

  • How to use Same Inspection plan for Multiple Plants?

    Hello,
    When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
    Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
    So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
    But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
    Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
    And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
    Thanks
    SAP Fans...

    Dear,
    For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
    Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
    Regards,
    Prasobh

  • How to Delete several Audio clips from Video clips on Timeline of APPro CS5

    I  would like to know how to delete multiple audio clips from Video clips at once in time line in APPro CS5? Please advice step-by-step procedure. I can DELETE audio from a single Video clip. But I wanted to DEL Audio from multiple video clips. Your help is much appreciated. Thanks

    Thanks for the advice given by Shooternz, Colin and Jim. Your help is much appreciated for a beginner like me... Jim's idea was also good..It worked for me and also safe if I need to use the original audio. Following method also found good...but previous audio clip cannot be extracted after deleting it. ... 1. Hold down "ALT" key first then select the first audio clip in the chain of video clips to Delete. 2. Hold down " Shift + Alt " keys together and click right mouse button on all audio clips to be deleted one by one. Make sure only audio clips are selected. 3. Then release ALT+Shift keys and then click right mouse button and select "Clear" from pull down menu to Delete all selected audio clips on the time line. This method works very well for me. Thanks for every one who has adviced me how to do it. Thanks guys... If u all find better method tha above...please inform us. Thx.

  • QM_MATERIAL DELETION FROM INSPECTION PLAN

    QM Experts,
    Is there any transaction code by which we can delete the selected materials from the task list of type Q?
    For example in a task list group XYX with group counter 1, there are 1000 materials assigned. Now I want to delete say 400 out of it.
    Whether QSR6 will serve the purpose? How? what precautions need to be taken while executing QSR6?
    Anand Rao

    Hi Anand,
    Do you want to delete it w/o keeping a track of it in any table you can use this transaction.It will delete it from the table level itself.
    If you are Okay to keep a track of it in table ( Del. Id - X), you can go for a LSMW program to do so.
    Please clarify how do you want to do it ?
    Thanks,
    RAVI.

  • How to delete stored execution plan?

    Hello!
    Version: 11.1.0.7.0
    I need a function, which deletes a stored execution plan from the CBO by sql_id, to force a new hard-parse.
    Background:
    I have an application, which calles a lot of a select-statement (with bind), using a specific execution plan, lets say 'A'. This application will run and call in the next three days.
    Now, I have recalculated the statistics of the table (by DBMS_STATS.GATHER_TABLE_STATS)
    which is used for the query, to improve performance.
    Now, the exexcution plan is good (say 'B'), and the query is fast, IF I copy the sql from the OEM to (any) other tool to get the execution plan...
    But: The application still uses the plan 'A' (which still runs slow..).
    (To opposite of the documentation! see Performance Tuning Guide, Chater 13.3.1 "When statistics are updated for a database object, Oracle invalidates any currently parsed SQL statements that access the object. The next time such a statement executes, the statement is re-parsed and the optimizer automatically chooses a new execution plan based on the new statistics.")
    A short look into v$sql, v$sql_plan shows, that the application still uses the old sql_id, which has the wrong execution plan "A" stored.
    The tested statements with plan B have the same sql, but other sql_id...

    Thank you for reading!
    The solution is:
    Add parameter no_invalidate => FALSE at the gather_table_stats call:
    exec dbms_stats.gather_table_stats(ownname=>'xxxx', tabname=>'yyyy', no_invalidate=>FALSE);

  • How to delete several spaces between clips on timeline

    I have hundreds of clip selects in my timeline pulled on a particular track.  However, they have spaces between all of them.  How do I delete all of the spaces, so that I can view the clips back to back.  I don't want to have to click on each space & hit delete a hundred times.  In FCP you could just pull a clip to a separate track at the end & higlight the space from the beginning of the sequence to that clip + hold down the delete..  It would delete, delete, delete quickly, closing the gaps on other tracks where possible.
    How can I do that efficiently in PremPro?!
    TIA,
    Heather

    http://www.youtube.com/watch?v=I89jYuZYvP8

  • Inspection plan deleted

    Hi,
    My users have just "deleted" certain inspection plans. They marked the plan with the deletion flag. How can I take the deletion flag out of it.
    Please this is very urgent!!!!!!
    Charline

    hi
    if you have put the deletion flag it is possible reove it.just go to inspection plan in change mode (QP02),press the header details then remove the deletion flag indicator.
    if you have run the QCR6 without archiving then it is not possible to revoke it
    kindly refer the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/fa9066f0bc11d283d60000e829fdb3/content.htm
    regards
    thyagarajan

  • QM- delete inspection Plan

    Hi Guys,
    i have an issue regarding master data and inspection plan.
    i need to change the base unit of measure on a material.
    when i tried the system gave me this message:
    The base unit of measure cannot be changed.
    The reasons for this are:
    Routings already exist that are assigned to the material.
    Type Group    GrC Plnt
    Q    235723   1   USNA
    so i have checked table PLKO and found my material.
    i have seen that an Inspection Plan has been created, so i deleted the IP with QP02. went to MM02 tried to change the Bum but same error.
    run tcode QSR6 but i am not able to delete this I.Plan. am i missing something?
    can you please help?
    thanks
    C.

    BTW: for your process you don't need to delete the inspection plan.  All you need to do is go to the material assignment screen at the header level of the insp. plan and delete the assignment of the material to the plan.  Then, if you wanted to, after changing the BUOM in the material, you could use QP02 to change the UOM used in the inspection plan, and the reassign the material back to it.  Save you from having to recreate the plan.
    FF

  • How to map revision level materials to already created inspection plan?

    Dear All,
    I have created single inspection plan for many existing raw materials. Now it has been found that each raw material have different revision level as well as valid from date.
    My inspection plan is created on 02.07.2014 and each raw material has different revision level with valid from date which is also very old (like 11.03.2012 for revision level 09).
    My Requirement is:  how to correct my inspection plan?,  so that it will work for each assigned raw material and there will not be any material revision level wise problem created for the inspection lot so that my inspection lot should be created in REL status in QA32 transaction i.e. inspection lot is assigned automatically as per standard SAP functionality.
    Thanks,
    Narresh

    Hi Amol,
    Thanks for your reply.
    In this business scenario, we are not creating inspection plan for each raw material because there is similarity in inspection for 40-50 raw materials and total number of raw materials are around 500. This will be very difficult and unnecessarily data creation in the system.
    As per my understanding revision level is for material master revision and if material master changes then how it affect so much on inspection plan? also is it means that for every revision in future we will have to create new inspection plan?  hence I believe that if I will make back dated inspection plan for raw materials then it may work. Is my understanding is correct?
    Expecting much better solution from QM experts.
    Thanks,
    Narresh

  • How To delete Inspection type permanently  in Mass processing?

    Hi SAP gurus,
    I have activated an inspection type 04. Later i found that tis particular inspection type is not useful for me. Using qa08 i deactivated this particular inspection type. But still materials goes to Quality Inspection (QI). But i want materials to go to Unrestricted Use directly. How to delete this inspection type permanently in mass processing.. Or please say me a other solution to make material go to Unrestricted use..
    Thanks in advance..

    Hi Paul..
    Yes i deactivated the inspection type after production is created. You have said that the inspection is still in "Q". Please say me how to find this. Another thing is, i found another option to send it to unrestricted. When doing GR, i selected stock type as Unrestricted. Since 04 inspection type is deactivated, its now going directly to unrestricted even after the production order is created before deactivation.
    Thanks a lot for your help.

  • Inspection plan deletion

    Gurus,
    Is it possible to do mass deletion of  Inspection plans.

    Hi,
    You can use CWBQM to delete multiple material number assignments at once. QSR6 delete the entire task list . Beware that the deletion of the material assignment doesn't completely delete from the tables. You will need to look at OSS note 60386.
    As you want to use the same group number in future, system will allow you but the counter number will be the next available.
    Cheers,
    Tushar

  • Inspection plan copy model

    Hello,
    How to extend the Inspection plan from one plant to another plan by copy model. The Master inspection characteristic were not getting extended, for ex when we coped from A- B , Header, Operation , Material assignment get copied , but the  Master inspection characteristic created as Plant A in the Plant B Header, Operation , Material assignment group counter.
    Thanks for the help
    Thanks,
    Nic

    I think there might be some confusion on what you are expecting to happen.
    Don't expect the MIC's used in a plan to have new MIC's created in the plant the plan is being copied to.
    The plan will simply be copied, using the MIC's in the plan. 
    So if MIC 10002301 from plant 1000 is used in plan 400 and you copy plan 400 to plant 2000, the new plan will use the MIC 10002301 from plant 1000.  
    The copy program does not create MIC 10002301 in plant 2000 for you.
    FF

  • SAP PP-delete Production orders, planned orders, purchase requitions & othe

    How to delete Production orders, planned orders, purchase requitions & other orders .
    Pls send me the T-codes or Paths.
    Any comments welcome   & Thanks in advance.

    Dear,
    1) Delete Production Order,
    Please refer this link,
    [DeleteProduction Orders |http://www.sap-img.com/production/how-to-delete-old-production-orders.htm]
    2) Delete Planned Order,
    MD16 is the only option to delete planned orders in mass.
    During MRP run if you choose - Delete and recreate plan order mode. Automatically the unwanted plan orders
    2) Delete Purchase Requisation,
    Execute MD04, in that it will display the created PR's
    Check in tcode MD62 whether you have any demand for that material which you are getting PRs first delete requirement here/
    Then run MRP by tcode MD03 or MD02 giving input of material and plant. In the initial screen of MD03 / MD02, make field planning mode - Delete and recreate planning data
    Is that Old PR Firmed.
    If yes remove the Firm indicator and Re run the MRP with planning Mode 3.
    It removes the PR from EBAN.
    Now check in MD04
    OR,
    Use Mass change transaction code MEMASSRQ or use BAPI (BAPI_REQUISITION_DELETE) to do the same.
    Or
    Use ME57 with layout ALV, in this also u can delete PR
    If you want delete PR manually then
    goto ME52N --> enter PR number --> select line item --> click delete button
    or
    goto ME52N --> enter PR number --> Item --> Tab Quanties/Dates --> set tick mark for closed check box
    Please check this thread,
    Deletion of SubReq
    Hope it will help you.
    Regards,
    R.Brahmankar

  • Printing inspection plans from engineering work bench

    Dear Gurus,
    How can I print inspection plans from the engineering workbench?
    Regards,
    MaX

    Depends on what you want to print.  From the task list view you can load the plans, select the ones you want to print and you'll gt a list of the selected plans along with various related fields.
    Ditto from the operations view.
    Can you be a bit more specific?
    FF

Maybe you are looking for