How to delete Shared Memory?

Hi Gurus,
Please help me to get out of this issue. I have to delete the content in shared memory. My system is R/3 4.6c and SQL 2000.
Thanks and Regards,
Ravi Basavaiah.

You can try to find out which program still have handles open.
http://www.sysinternals.com (now a Microsoft site)
-->      Process Utilities
-->      Process Explorer
Download that and execute it on your SAP system.
Then dig down to the process tree and check all processes of user SAPService<SID> and <sid>adm.
Markus

Similar Messages

  • How to delete autocomplete memory?

    I factory reset my iPad mini for my Mum. She set it up as a new device and signed in to her iCloud. However, although ALL my data has gone, it still autocompletes her messages and emails with contacts from my long-gone address book? Worse still, after a high pitch shrieking session it created between itself and her iPhone (SO odd, never heard anything like it - v loud interference?) her iPhone now does the same - so this "ghost" memory has now been absorbed into her iCloud account.
    Factory reset does NOT delete this autocomplete memory.
    There is no way I can go through 300+ contacts on both devices and manually do this? Even if there were a way it needs deleting from her iCloud account now
    HOW is this possible? Or allowed? If anyone sells a device it will still have personal information on it!

    > Use  the command ipcrm -s <PID>
    >
    > Also award points if workouts
    one more point hunter... useless advice ... reading the message carefully you will detect that this is Windows
    furthermore, please stop duplicating
    How to delete Shared Memory?

  • How to delete the memory in "other"?

    how do i delete the memory in "other" in my iphone4 . i accidentally restored the data in other as well prior.So restore didnt work.please help. i have come across many questions relating and referred communtities . but no satisfactory answers ..

    You cannot delete it all.  It is normal to have a gb or so in other.
    Much more than this indicates corrupt files.  A restore is how you get rid of it.  If restore from backup does notwork, then restore as new.

  • DB_ACTION_STATNEW - Error - How to increase shared memory in shadow instanc

    Hi all,
    We are facing the below error in the DB_ACTION_STATNEW phase:
    TRACE-INFO: 82:                                                                                13  4.822960
    TRACE-INFO: 83:  [developertra,00000]   WHERE TABNAME = :A0;                                           8  4.822968
    TRACE-INFO: 84:  [dbntab      ,06694]  ***LOG BY4=>sql error 604    performing SEL on table DDNTT
    TRACE-INFO: 85:                                                                                222  4.823190
    TRACE-INFO: 86:  [dbntab      ,06694]  ***LOG BY0=>ORA-00604: error occurred at recursive SQL level 1
    TRACE-INFO: 87:                        ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select t.ts#,t.file#,t.block...","Typecheck","seg:kggfaAllocSeg")
    TRACE-INFO: 88:                                                                                21  4.823211
    TRACE-INFO: 89:  [dbeh.c      ,00000]  *** ERROR => missing return code handler                       13  4.823224
    TRACE-INFO: 90:                         caller does not handle code 1 from dbntab.c[3718]
    TRACE-INFO: 91:                         ==> calling sap_dext to abort transaction
    HALT 20080410111303
    We have a physical RAM of 64 GB.
    dcecqv1:root > dmesg | more
    Apr 10 11:24
       $Revision: vmunix:    B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
    Memory Information:
        physical page size = 4096 bytes, logical page size = 4096 bytes
        Physical: 66399504 Kbytes, lockable: 51408244 Kbytes, available: 59648572 Kbytes
    From the error message, I feel that I need to increase the shared memory, can you help me how to increase the shared memory now, bcos system is now running in the shadow instance.
    Thanks & Regards
    Senthil

    Thank you for your mail Shaji.
    SQL> show parameter shared_pool_size
    ORA-00604: error occurred at recursive SQL level 2
    ORA-04031: unable to allocate 4120 bytes of shared memory ("shared
    pool","select x.inst_id,x.indx+1,ks...","Typecheck","seg:kggfaAllocSeg")
    When I tried to see the shared_pool_size it gives the above error.
    Regarding the three log files:
    STATNEW.LOG
    LISTNEW.LOG
    DBSTATNEW.LOG
    - I didnot find STATNEW.LOG file in the path /usr/sap/put/log
    - supadm> cat DBSTATNEW.LOG
    1 ETQ201XEntering upgrade-phase "DB_ACTION_STATNEW" ("20080410111258")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '02', GwService = 'sapgw02'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ389 reading file "LISTNEW.LOG" in directory "/usr/sap/put/log".
    4 ETQ275 Created SQL-script "EXSTATE.ORA"
    4 ETQ275 Created SQL-script "EXSTATC.ORA"
    4 ETQ276 Executing SQL-script "EXSTATE.ORA"
    4 ETQ001 START time "2008/04/10 11:12:58"
    4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/SUP/SYS/exe/run
    4 ETQ399 ext. env.: LD_LIBRARY_PATH=/usr/sap/SUP/SYS/exe/run:/opt/java1.5/jre/lib/IA64N:/opt/java1.5/jre/lib/IA64N/server:/opt/java1.5/jre/../lib/IA64N
    4 ETQ399 2008/04/10 11:12:58: put_execute: (tp) forkpid:2537
    4 ETQ002 END   time "2008/04/10 11:13:03"
    4 ETQ278 Errors during execution of SQL-script "EXSTATE.ORA"
    1EETQ203 Upgrade phase "DB_ACTION_STATNEW" aborted with errors ("20080410111303")
    supadm>
    supadm> tail LISTNEW.LOG
    NAME= WTY_OBJNR_INDEX
    NAME= WTY_PARTNER_TAB
    NAME= WTY_RCLHST
    NAME= WTY_RCLOBJ
    NAME= WTY_RELOB_TAB
    NAME= WTY_RELOB_TAB_TX
    NAME= WTY_TABLE_ALV
    NAME= WYT2M
    tp_exec_dbscript: 1 statement(s) successfully processed.
    supadm>
    Can u pl help
    Thanks
    Senthil

  • How to delete "Shared Garageband Settings" & "My Garageband Settings" in Logic's library?

    Hey guys,
    Does anybody out there know how to delete the "Shared Garageband Settings" & "My Garageband Settings" in the library tab? Basically, I just bought Logic Pro and all it's additional content and there's two folders (read above) which have one or two presets inside them which I know I'll never use. Does anybody what files / folders I'll need to delete?
    Cheers,
    Sid

    Are the printer names longer than 30 characters? If so, make sure they are different within the first 30 characters. You should be able to rename your local printer queue without changing the name of the networked printer. Control Panels, Printers and Devices, select your printer, and right-click to "Rename".

  • How to delet 'other' memory from iphone

    My iphone works fine, but I have a problem with the memory of my 8gb phone, i have 2.2 gb of music and one app thats 9mb and when i try to download another app it says i do not have enough memories, i go to seetings to see whats wrong then it says thats 4.3 gb is other? How do I delet the other memory i am not using.

    Good day all,
    I have a 4S that had 5+G of "other" that I was trying to free up.  I searched and searched, tried all the suggestions and had no success.  I tried a full restore and freed up the memory but didn't want to loose all my settings, app folders, etc.  After a process of elimination the solution that worked for me was to delete txt messages!  When I went from the 3G to the 4S I restored from a back up.  I've never delete any of my txt message history...  so all that information, photos, videos, etc were being caried from one device to the other for like 3 years!
    I started with a test.  Pluged in my 4S, synced it.  Registered 5.2GB of "other".  I ejected the phone from itunes.  I deleted my wifes txt message (with whom I txt the most).  I plugged back in and "other" dropped down by an entire Gig!!  So, I tried again with another that I txt often...  and sure enough when down another Gig.
    So, I decided to take the plug and start off fresh...  I deleted ALL of my txt messages and my "other" memory went down to .52gigs!
    This is why a FULL restore has been successful for those trying to clear out "other" memory.  When you initiate a Full restore, you are cleaning out your entire memory of txt messages which includes large files of photos and videos!
    So this is what worked for me folks!  I hope it helps someone!

  • Help... how to delete shared computer????

    I changed the name of my computer, the old name however remains in the shared sidebar and says connected as guest when I click on it. It is on the same computer.
    How do I delete or fix that? Any help would be appreciated.

    Do you have Back to My Mac enabled? It might be a stale entry on the server. It will probably disappear in an hour or so. You could also try sleeping your computer and waking it up. That sometimes clears stale servers.

  • How to delete shared garageband demo songs?

    Hello there,
    I tried to delete the "GarageBand demos songs" located at the users/shared folder but then I can't empty the trash and they're still there.
    Any suggestions?
    Thank you.
    Julieta

    Hi, Julieta
    You're most welcome. Thanks for posting back and letting me know. Glad to help.
    The full permissions for the /Users/Shared directory are:
    Owner: system
    Access: Read & Write
    Group: wheel
    Access: Read & Write
    Others: Access: Read & Write
    Hence anyone (or any application) can write to that folder, which is its intent: sort of a "Commons" where any user can leave a file for access by any other user on the Mac.
    The GB files may have simply been seen as being "in use" by another process, even though GB was not running, perhaps even GB itself. I've seen this happen with Preview from time to time: view a file in Preview, close (Command-W) the Preview window, trash the file, empty the Trash, the file you were viewing won't empty because it is "in use." If one Quits (Command-Q) Preview, the Trash can be emptied. I've reported a bug on the Preview example.
    One can determine the process that is considered to have the file "in use" as follows:
    1. Open the Trash
    2. Launch Terminal, located in the Macintosh HD > Applications > Utilities folder.
    3. Position the Terminal and Trash windows so they do not overlap.
    4. At the Terminal prompt, type lsof followed by a single space, but do not press Return yet.
    5. Drag and drop the file cited in the alert dialog from the Trash to the Terminal window. The path to the file appears after the command typed in step 4.
    6. Press Return. You will receive output in Terminal listing the file you dropped on the Terminal window in step 5. The process or application that is considered to have the file "in use" is listed under the column labeled COMMAND. Quit that application or, using Activity Monitor, terminate that process.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • How to use shared memory as an array of pointers?

    Hi,
    Can we use the pointer returned by "void** ptr = (void * *)shmat();" for accessing the elements in array fashion?
    I have a pointer to pointer to struct - an array of pointers & I want to access the elements by using array notation of ptr[index].
    But, when I do so, my process crashes with SSEGV.
    My code is somewhat as below:-
    size_t size = nSize*sizeof(void *);
    key_t key = 90000;
    int id = shmget(key,size,0777 | IPC_CREATE);
    void** ptr = (void**)shmat(id,(void*)0,0777 | SHM_SHARE_MMU);
    memset(ptr,0,size);
    void* tmpPtr = ptr[100]; // this line causes crash.I was trying to do this on the basis of following code, which uses malloc & works fine:-
    uht->t = (void **)malloc(nSize*sizeof(void *));
    pUHT_ITEM curr_item = (pUHT_ITEM)uht->t;
    How can I achieve this?
    Please help. Thanks.
    Message was edited by:
    grbSunUser

    After debugging the program using dbx, I found that after certain specific index, I get an error of "dbx: cannot access address 0xfd032000", if I do "print suht->t[51200]".
    What I did is that I created shm segment of size = 50000 * (sizeof(viod*))
    This turns out to be 200084.
    By doing step by step print of each index in this shm segment, I reached upto the index of 51199. When I did "print suht->t[51199]" in dbx, I got "suht->t[51199] = (nil)", means this was accessible location.
    But, when I tried "print suht->t[51200]", I got an error of "cannot access...".
    I think this is index from which, if process tries to access, will cause crash.
    How are these numbers related? Should I not do "50000 * sizeof(void*)"?

  • HELP*****deleting all memory saved on nokia e72***...

    hi can someone please help me concerning my nokia e72, i have bought a 16gb memory card currently waiting on it but in the mean time the 4gb which came with the phone isn't allowing me to put any music on go on the internet, play the radio....do anything really. what is the problem? i have no idea what to do.....also how do i put music on the phone? when i plug it into the computer, files open but which 1 do i put music in too is it the download file?? i am totally lost with this phone actually thinking of taking it back its just very complicated...i need step by step info on how to delete my memory and how to put music on.  
    one other thing the phone is quite slow it freezes alot i have to take the battery out inorder to get it working again why is this? due to no memory?? does this phone save all the web pages i use?? what is using up the memory?? please help!!!
    thansk.

    Do you want to delete all the info on the memory card or from your phone. Dialling *#7370# from the main screen wipes out the phone memory by doing this you will lose all your data stored on to your phone memory like contacts, notes, bookmarks any applications installed, nokia music licenses ( you can later retrieve this) etc. In order to format your mem card so it from your phone go to file manager and use 'format mem card' For storing music on the card create a folder named 'music' or 'mp3' and place all your songs there, open your music player and refresh music library, wait till all the songs are added.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • My iphone's memory is near capacity from photo albums sync'ed with my mac and I haven't found out how to delete select albums without wiping the iphone.  Any suggestions??

    my iphone's memory is near capacity from photo albums sync'ed with my mac and I haven't found out how to delete select albums to free up memory without wiping the iphone.  Any suggestions??

    You do the opposite of how you got them on your phone, you unsync the pics using iTunes.

  • How to delete child appleid from family sharing on ios 8 ipad

    I have two apple ids for one child in Family Sharing. How do I delete one?

    I have the same question.  I'm about sick of reading people referring me to the above link that King refers to.  Primarily becuase it does NOT address the question at hand.  That question is "How do you delete a child Apple ID?". I know I've seen that you can not remove adult ones, but apple does not you "can" do it, but doesn't show "how" to do it.  In my personal case, I need to delete the one I made and create a new one.  This is because having an incorrect child apple ID in my family share takes 1 spot away from my sharing.  I need to remove the child ID from my share plan to create a corrected apple ID for her.  The above linke King posted states,
    "Children under 13 can't be removed from a family.  If you need to, you can transfer the child to another family or delete their apple ID." Now..the phrase "child to another family" is hyperlinked and clearly shows how to do this.  But the "delete their apple ID" is NOT hyperlinked.  So we continue to search for our original answer that I haven't found since iOS 8 was released and I bought my iphone 6 on release day.
    Now on that topic, the family share is messed up HARD for children.  Heres why, while I wait to find out how to delete the incorrectly typed apple ID I made, I tested how it works for my 6 y/o, who was very excited to get her own iphone 5 (w/o cell cervice, glorified itouch).
    1.) While testing it out with the bad ID, I created the family share as the ogranizer.  I then added my wife and made her a Parent/Guardian".  Howver, despite this, when the "child" ID requests permission to purchase something in itunes, it only sends it to my wife and not me.  This shoudl go to both parents! If you want one or the other, make a setting.  Otherwise, if its flagged as an organizer or parent, they should have the power.  After all, as the organizer, she was verified as MY child through my credit card but I can't authorize the purchase as the organizer. Do what? Come on!
    2.) When my daughter asks to buy something, she has to put in a password.  This is simply nuts. My 6 y/o needs to put in a password for PERMISSION to ask her parents to buy something. Of which the parents then authorizes the purchase via either a password or fingerprint scan.  What non-parent thought this up?
    3.) To update an app on my daughters iphone requires her to request permission for each and every app, despite there being an update all.  This means, she has to put the password in on every...single...update...individually. Update all does not work. This means we need to authorize each update too...My God...really?
    4.) On the topic of passwords. Again, CHILD account ID. Apple requires passwords to be 8 characters, has to have an upper and lower case, can't be a simple word, has to have a number. I mean..lets sit and think about this.  a CHILD with such a complex password needing to be entered each time to update an individual app and ask permisison.  If its a child, it means the responsibility should be put on the parent.  Have the OS route the request to ME and let me put the password in for my child.
    5.) Whats the point of Auto Update? I mean, if I APPROVED these apps to go on my daughters phone, then it should AUTO UPDATE itself! It does not! Really?
    6.) How can apple advise in the FAQ's to delet the apple child ID but doesn't hyper link to it? Is someone really that dense?  It sure scares the DEATH out of me to try apple PAY! >.<
    7.) As I sit here looking at my family share settings, this very second, and I look at my daughters ID in there (the incorrect one I need to fix), there is nice itty bitty language on how to transfer an apple ID and a hyperlink there.  This is a GREAT spot for DELETE APPLE ID!  You know, I even logged into apples main management Apple ID section...you can't even delete the ID there either.
    8.) The WHOLE point of the family share is so you can share up to 6 people. BUT, if you try to download prior purchases on the new account's, you get an error message saying that this was previously purchased BUT you are unable to download it (For what ever reason) on every one.  Thank GOD I realized I can manually FORCE the crap onto her phone by pushing it from my desktop computer to hers.
    I mean...how can a "high tech" company be so obtuse? If you can't get CHILDREN policy right, how will your Apple Pay policy work out?
    Sincerely,
    A very disgruntled parent!

  • How do I remove a DB from shared memory in Solaris 10?

    I'm having trouble removing  an in-memory database placed in shared memory. I set SHM key and cache size, and then open an environment with flags: DB_CREATE | DB_SYSTEM_MEM | DB_INIT_MPOOL | DB_INIT_LOG | DB_INIT_LOCK | DB_INIT_TXN. I also set the flag DB_TXN_NOSYNC on the DbEnv. At the end, after closing all Db and DbEnv handles, I create a new DbEnv instance and call DbEnv::remove. That's when things get weird.
    If I have the force flag set to 0, then it throws an exception saying "DbEnv::remove: Device busy". The shared memory segments do not get removed in this case (checking with `ipcs -bom`).
    When the force flag is set to zero, the shared memory is released but the program crashes saying "Db::close: BDB0087 DB_RUNRECOVERY: Fatal error, run database recovery".
    What am I doing wrong?

    This is curious, since a simple program similar to what is described is known to work. I've modified the standard sample program examples/cxx/EnvExample.cpp C++ to use an in-memory database, DB_SYSTEM_MEM, and DB_TXN_NOSYNC. The "Device busy" symptom occurs if the close of the environment handle is bypassed. I have not been able to reproduce the DB_RUNRECOVERY error.
    How does the program's use of Berkeley DB different from what is provided in EnvExample.cpp?
    Is it possible to send me the relevant portions of it?
    Regards,
    Charles Koester
    Oracle Berkeley DB

  • HT5731 My iPad says I cannot download any more because I am out of memory.  I purchased space in cloud and still get same message.  I do not know how to delete shows to open space.  Can you help?  Thanks.

    My iPad says I cannot download any more because I am out of memory.  I purchased space in cloud and still get same message.  I do not know how to delete shows to open space.  Can you help?  Thanks.

    Your iPad is physically out of storage space. Purchasing space in iCloud dosen't magically give your actual iPad more physical  storage space.
    You need to delete content off of your iPad.
    https://discussions.apple.com/thread/5122738?start=0&tstart=0
    http://m.youtube.com/watch?v=mZdBQoE37FA&desktop_uri=%2Fwatch%3Fv%3DmZdBQoE37FA

  • How big a deal is the shared memory for video editing

    Hi,
    It looks like the portable Mac I have been waiting for has been released. The one thing that I am wondering about is the shared video? memory. How big a deal is it?
    It looks like it should not be an issue with iMovie. How about FCE?
    With the Macbook at $1,300 and the entry level MBP at $2,000, $700 is a lot to me- budget and otherwise- Especially since I will add a gig of ram, and the 3 year apple protection plan.

    Hi There,
    I use iMovie most of the time for around an hour project and went back and forth with iSlick FX, iTunes, garage band and iDVD, and I find my MAcBook serve me well (2.0 Ghz, 2 GB), and use external LCD for wider view editing area.
    The chipset is actually allowed to use up to 224 mb of shared memory (with based 80 mb on os X) and the bigger matched memory you install, the more flexibility for that graphic chipset to allocate shared memory.
    The only time my project getting choppy is when I select show waveform for entire clip in my project area. That is when the chipset is lack power to play it real time.
    But if you are serious about getting editing and planning to upgrade to Final cut (express or pro) later, MacBook Pro is a better investment and bigger screen too.
    Good Luck

Maybe you are looking for