How to delete silence in batch process using Audition CS6

I've started using Audition CS6 recently.
I'm able to delete silence at the beginning and end of the source audio files using delete silence effect (from diagnostics window).
I'm not able to record this as new favorite so that I can apply it in the batch process.
How can I delete silence at the beginning and end of the source audio files (1000 or more files) using batch process?
It will be of great help if I can get guidance on this, instead of manually editing these files.
Thanks in advance for any assistance.

yes, the favorite is not aware of the diagnostic panel (and delete silence action).
and the silence at the beginning and end varies between the files, is there any way to deal with?
it doesn't look productive to scan for the silence and delete the silences manually for each individual file (for more than 1000 files).
can we create a macro or use some scripting in audition to deal with this in a batch process?
Or is there any other tool that's recommended to have this part done in a reliable manner?

Similar Messages

How to automate the data load process using data load file & task Scheduler

Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
Thanks

To follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt.

How to delete an operation from order using the bapi

Can somebody please tell me how to delete an operation from order using the bapi
BAPI_ALM_ORDER_MAINTAIN.
Following was the test data for the BAPI.
000000 OPERATION DELETE 0000040052810070
000000 SAVE 0000040052810070
Even I tried entering the operation table. The BAPI control ends fine, but when I check the order using IW32, the operation still exists.
So, can you please tell me where Iam going wrong.

Hi Subash Mohanvel,
Check bapireturn parameter of the bapi BAPI_ALM_ORDER_MAINTAIN after execution of the code , and if there is no error message in the return table then call bapi_Transaction_commit.
Unless you call this database saving of the records/values will not get reflected in the system.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

I currently have a mac osx, and my CC keeps coming saying its expired, when it should be running the CS6 design standard. So how do I get my platform to use the CS6 as my default instead of the CC one.

I currently have a mac osx, and my CC keeps coming saying its expired, when it should be running the CS6 design standard. So how do I get my platform to use the CS6 as my default instead of the CC one.

Sign in, activation, or connection errors | CS5.5 and later
And you can change the default program for a file type under File --> Info.
Mylenium

How do I create vocal harmonies with Adobe Audition CS6?

Anyone know of an "easy" way to create vocal harmonies using Audition CS6? (That doesn't involve individually recording each part. I'm looking specifically for a method that involves simply recording the lead and then using the software to change the note by either a third or a fifth or change the timing to acheive harmony in a layered multitrack.)
Thanks

If I recall correctly there is a section in the Beatles song Please Please Me for example where the harmony (apart from one note change) is all the same note so as SteveG says there is much more to harmonies than just pitch shifting a lead vocal
In this studio we have just finished about 45 hours of manually pitch correcting lead and harmony vocals (using Audition's excellent manual pitch correction function) for 8 songs and there are parts in there where the engineer had replaced the incorrectly sung harmony with AutoTune generated harmonies - absolutely horrible!
So we removed them and just pitch corrected the original lines - the results were spectacular.
BTW Some of these songs has more than 20 vocal tracks!
However you need to have an understanding of harmony to do this
If this is no help then Waves have a plugin called UltraPitch which may help but the results are just never the same

How to delete cube old request by using abap code?

Dear experts,
Here is one thing need your help:
We have one cube need to delete the old request. This cube is loaded daily and only need to delete the request of that month.
I know there is one "Delete Overlap Requet" type in the process chain, but my concern is: in our DTP filter, different day the selection will have different values, let's say A and B, and A and B are not even overlap at all.
So my question is:
1. Can I still use "Delete Overlap Request" to delete the old request?
2. If so, I see it can be implemented by abap routine, can anyone give me some sample code? Like how to delete request only in this month. And how to delete request whose selection is equal to a specific value.
Note: one of the source cube is real time cube so can not delete the request from infopackage.
Any post will be appreciated and thank you all for your time in advance!
Regards.
Tim

Here is the intial code when I choose "Request Selection through Routine", please help me on how to choose the specific request and delete them in this routine.
program conversion_routine.
Type pools used by conversion program
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
    InfoCube        = ZPC_DEL_REQ_ZBPS_C01
form compute_ZPC_DEL_REQ_ZBPS_C01
tables l_t_request_to_delete structure rsreqdelstruc
using l_request like rsreqdone-rnr
changing p_subrc like sy-subrc.
*Insert Source Code to decide if requests should be deleted.
*All Requests in table l_t_request_to_delete will be deleted
*from Infocube ZPC_DEL_REQ_ZBPS_C01.
*Add new requests if you want to delete more (from this cube).
*Remove requests you did not want to be deleted.
$$ begin of routine - insert your code only below this line        -
     loop at l_t_request_to_delete.
     endloop.
     clear p_subrc.
$$ end of routine - insert your code only before this line         -
endform.

Batch Processing using Bridge to PhotoShop

- I am using CS4 on a PC.
- I shoot RAW and from Bridge I go into Camera RAW and adjust my images.
- Usually I save each one at a time however I would like to learn how to be able to edit each photo using Bridge and Camera RAW ( I’m already doing this), then be able to take all of the photos in the directory and batch process to save as a tiff or jpg for further manipulation.
- I was using Canon’s DPP but want to do all my work in Adobe. The process in DPP is straightforward.
I'm sure this is simple but I can't seem to find it in the menu's or Help.
Thanks in advance for your help.

Curt:
Thank, this gave me the direction I needed. After a few tries I think I've got it down pat.
Thanks again.

How to delete a database record by using EJB entity beans

Hi, All,
Does anyone know how to use entity bean to delete a database record? I have all the EJB entity beans created, including access beans to each. I can successfully create records, find and update records, however, I haven't find a way to delete records yet.
Your response is appreciated.
Cathy

Please see EJB Forums for continue discussion on this subject.
Reference titile: "how to delete database record by using CMP entity beans "

Is it possible following batch processing using javascript...?

Hi Everyone,
Is it possible with in javascript following batch processing?
• Open all PDF files in folder
• Get which font to be used
• Get which color plate to be used (i.e.) CMYK or RGB
• Get page trim size width and Height.
• Close the file
• Past in Excel or note pad
Please help me, i have do so many files do the same process.
Thanks in advance.
-yajiv

Some time ago I was looking for a way to find out a pdf’s page-count and this was one of the solutions I was presented with (Bridge might offer a better sollution, though):
#target photoshop
thePageNumber = getPDFPageCount ( File.openDialog("select pdf"))
alert (thePageNumber);
// by jezz, based on something by xbytor i guess;
function getPDFPageCount(f) {
f.open ('r');
var gotCount = false;
while (! gotCount) {
next_line = f.readln();
if ( f.eof ) {alert("Aborting the script\nWe've got to the end of the file without finding a page count");
     f.close();
     exit();
     if (next_line.indexOf ("/N ") > 0 && next_line.slice(0, 9) != "<</Length" && next_line.slice(0, 9) != "[/Separat") {
     var p = next_line.match (/\/N (\d+)\/T/)[1];
     gotCount = true;
     else if (next_line.indexOf ("/Pages") > 0 ) {
//      alert (next_line);
     var p = parseInt(next_line.substring(next_line.indexOf("/Pages") +6), 10)
     gotCount = true;
f.close ();
return Number(p);
I suppose this approach could be modified to address some of the features you are looking for.
But the issue might be a fairly complicated one, as a pdf may for example combine many different TrimBox-sizes.
Have you asked over in the Bridge Scripting Forum, too?

Batch processing using JPD suitability

Hello,
In our company, we are using Weblogic Integration 8.1.6 for batch DB processing mixed with some business logic. We have a few applications built around this: an event generator is fired and a JPD (with DB controls and other controls calling EJBs and WSs) runs to process large CSV files (8MB) into the DB, with some other queries for business data in between, on a daily basis.
However, we have been facing (and still are facing) many problems with those JPDs. It seems to me that they are not such a good choice for long running batches. There is always something: memory is to low, memory is too high (yes! there was a time when we had to lower the instance memory from 1.5GB to 1GB, to prevent it from crashing, after endless trial and error), the transaction timeout is too short (in the descriptors or domain wide), processes cannot be monitored in the WLI console for unknown reasons, transaction handling is not clear (you cannot avoid transactions inside the JPD; it is forced by default - you can only disable it through the datasource) and more problems that happened throughout the past few years, which required rather tedious trial-and-error solving.
My question is: are JPDs really suitable/intended for long batch processing? The event generators certainly invite you into using them for that purpose. Is anybody else using them for that? Or is everyone else happy with batch EXEs?
Edited by: KhaledWLS on Sep 19, 2010 10:37 AM

Please repost your question in the SOA Suite forum:
SOA Suite
This forum is for WebLogic Server and readers may not be familiar with WLI.

How to speed up PDF batch processing when creating searchable image PDF's?

When using the batch processing tool in adobe to create multiple searchable image files into PDF, the process is considerably slower compared to scanning straight from the adobe window and importing scan back into adobe. Is there a way to get around this?

The flaw is here:
This is a Windows Server 2012 box
Adobe desktop programs are generally not officially supported on server operating systems. Whatever issues you have are probably due to things like local users vs. network users, disk quota, specific group policies or plain and simple another process occupying or blocking the same port that the QT server is using. In any case, this is nothing we can figure out for you. You have to sit down and work your way through the server's administration tools, turn off stuff, change user permissions. Check the event logs for conflicting processes or use tools like Sysinternals' Process Monitor or Wireshark to track down port collisions and otehr problems.
Mylenium

How to delete meeting through API for Using Adobe Connect 8 Web Services

Using Adobe Connect 8 Web Services support "Create meetings" API to create a Adobe Connect meeting.
But I can't find "Delete meeting" API similar to delete meeting,Could you tell me how to delete meeting through API.
Thanks!

You must have used sco-create to create meeting. To delete a meeting, use sco-delete API call.
Find its documentation here.

How to delete a song from iphone using "itunes 12"

iTunes 12 & iPhone 5s v8.1, iTunes installed on PC with Windows 7
I need to delete some songs from my iPhone. They are not on any playlist. I see no way to delete them using either iTunes or the iPhone.
How do I delete songs from my iPhone using the iPhone OR iTunes?

I also have this question as well. I've done everything from turning off the "show all music" to turning off icloud. After hours of frustration, I decided to delete all music and just re-download the songs i actually want on my phone. Apple makes everything so much more difficult than it has to be. Next time, I'll try the "throw phone at wall" method.

How to delete/abort/terminate a process instance. (Admin purpose)

Hi All,
I have following 2 problems while aborting a process. Any suggestion will be highly appriciated.
1. As admin, I want to delete/terminate/abort a process even if its not marked abortable in the deployed BPM activity. (not sure, if papi provides such facility or any workaround is possible)
2. Is it possble to abort a process, which is on automatic activity. (for some reason if its looping in the automatic activity)
Thanks in advance for your help.
Regards,
Manohar Chhapolia

If the activity does not have its abortable property enabled, PAPI won't be able to abort the instance. Consider adding a Grab activity with from all/to all and abort turned on.
Grab the instance and then abort it.
Dan

How to delete silence in batch process using Audition CS6

Similar Messages

Maybe you are looking for