How to delete some data from GLPCA table
Dear Friends,
We have extracted some data in GLPCA table via the ECPA component. We
want to delete these records ( Doc type and Posting date is known).
However we do not want other data already existing the GLPCA to be
deleted. Is there some Std SAP Trx for deletion of partial/select data
from EIS tables.
Please explain us clearaly how we can delete these records.
Your quick reply for this issue is highly appreciated.
Thanks & Regards,
Naveen Kumar.
Hello,
Please check the use of the report ZDELETE_PCA_DATA_BUKRS (mentioned in the SAP note 1174360), to delete totals from GLPCT.
I am not sure of any deletion reports for GLPCA table.
If you open the Source code of this program, you can see the following information :
"This report provides a possibility to delete actual and plan
*& postings on company code level as an alternative for transaction
*& 0KE1."
I do not have much information on this report as, personally I haven't used this anytime. Please run in 'Test Run' mode first and look for the results.
I hope this helps.
Thanks and regards,
Suresh Jayanthi.
Similar Messages
-
How to delete some date in target table at a mapping?
How to delete some date in target table at a mapping?
I extract date from source tabel into target table,
but before extract date I want to delete some date from target?
how to do?Just to change a bit of terminology in the reply, within the mapping, click on operator properties and choose TRUNCATE/INSERT.
Note that truncate is dependent on constraints, so you probably must disable those before doing this. You can of course do DELETE/INSERT...
Jean-Pierre -
How to delete the data from partition table
Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right. -
How to export some data from the tables of an owner with integrity?
Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
PhilipsThanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs... -
Goto: How to export some data from the tables of an owner with integrity?
Hi to all,
Help please: How to export some data from the tables of an owner with integrity?
My thanks in advance,
PhilipsThanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs... -
How to delete PSA Data from any Table
Pls specify the steps to delete PSA Data from any specific table.
You can delete the PSA requests manually one by one as specified in the previous posts.
You can also trigger the deletion of PSA periodically by using Process chain.
'Deletion of PSA request' is the process type that need to be used.
By this way you can delete all the PSA requests of the table, that are older than certain number of days.
you can also schedule the PSA deletion for more than one table at a time, by including the tables in the same Process chain. -
How to delete a record from BSEG table
Dear Experts,
How to delete a record from BSEG table.
If there possible to delete some records from transparent table ?
Please help.
Regards,
TanHi,
Deleting a record from a standard table can be done only if table maintenance exists - Cehck tcode - SM30. But it is not advisable to delete records, coz the records may be dependent on many other tables. If u delete in a single place, there may be chance that inconsistency in the data happens and hence will affect ur financial statements.
Pls. assign points, if useful
Regards,
Sridevi -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to delete a column from the table control in module pool?
Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar Nhi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control -
How to delete the data from KNVP without using the delete statement
Hello friends,
I have a requirement that I have to delete the data from KNVP table without using any delete statement. For it I have to use the Standard BAPI or any standard program.
Can you please tell me the name of the standard program or BAPI to delete the data .
Thanks in Advance
KuldeepHello Raymond,
I have use the function 'CUSTOMER_UPDATE' in which I only gives the data in T_XKNVP table only but still the data is not get deleting. Please see the code below.
=============================================================
REPORT ZK_TEST2 .
data :
I_KNA1 LIKE KNA1,
I_KNB1 LIKE KNB1,
I_KNVV LIKE KNVV,
I_YKNA1 LIKE KNA1,
I_YKNB1 LIKE KNB1.
Data :
T_XKNAS LIKE FKNAS occurs 0,
T_XKNB5 LIKE FKNB5 occurs 0,
T_XKNBK LIKE FKNBK occurs 0,
T_XKNVA LIKE FKNVA occurs 0,
T_XKNVD LIKE FKNVD occurs 0,
T_XKNVI LIKE FKNVI occurs 0,
T_XKNVK LIKE FKNVK occurs 0,
T_XKNVL LIKE FKNVL occurs 0,
T_XKNVP LIKE FKNVP occurs 0 with header line,
T_XKNVS LIKE FKNVS occurs 0,
T_XKNEX LIKE FKNEX occurs 0,
T_XKNZA LIKE FKNZA occurs 0,
T_YKNAS LIKE FKNAS occurs 0,
T_YKNB5 LIKE FKNB5 occurs 0,
T_YKNBK LIKE FKNBK occurs 0,
T_YKNVA LIKE FKNVA occurs 0,
T_YKNVD LIKE FKNVD occurs 0,
T_YKNVI LIKE FKNVI occurs 0,
T_YKNVK LIKE FKNVK occurs 0,
T_YKNVL LIKE FKNVL occurs 0,
T_YKNVP LIKE FKNVP occurs 0 with header line,
T_YKNVS LIKE FKNVS occurs 0,
T_YKNEX LIKE FKNEX occurs 0,
T_YKNZA LIKE FKNZA occurs 0.
T_XKNVP-KUNNR = '7000002648' .
*T_XKNVP-VKORG = '0001' .
*T_XKNVP-VTWEG = '01' .
*T_XKNVP-SPART = '01' .
T_XKNVP-KZ = 'D' .
append T_XKNVP to T_XKNVP.
CALL FUNCTION 'CUSTOMER_UPDATE'
EXPORTING
I_KNA1 = I_KNA1
I_KNB1 = I_KNB1
I_KNVV = I_KNVV
I_YKNA1 = I_YKNA1
I_YKNB1 = I_YKNB1
TABLES
T_XKNAS = T_XKNAS
T_XKNB5 = T_XKNB5
T_XKNBK = T_XKNBK
T_XKNVA = T_XKNVA
T_XKNVD = T_XKNVD
T_XKNVI = T_XKNVI
T_XKNVK = T_XKNVK
T_XKNVL = T_XKNVL
T_XKNVP = T_XKNVP
T_XKNVS = T_XKNVS
T_XKNEX = T_XKNEX
T_XKNZA = T_XKNZA
T_YKNAS = T_YKNAS
T_YKNB5 = T_YKNB5
T_YKNBK = T_YKNBK
T_YKNVA = T_YKNVA
T_YKNVD = T_YKNVD
T_YKNVI = T_YKNVI
T_YKNVK = T_YKNVK
T_YKNVL = T_YKNVL
T_YKNVP = T_YKNVP
T_YKNVS = T_YKNVS
T_YKNEX = T_YKNEX
T_YKNZA = T_YKNZA
============================================================= -
How do I make data from one Table flow into a separate Table
How do I make data from one Table flow into a separate Table in iworks numbers?
Great stuff Yvan,
KOENIG Yvan wrote:
Here you may see the way to transfer the contents of a column of Table A in a column of Table B
I used two kinds of formulas.
In the cell A2 of Table B
the formula is :
=Table A :: $B2
It may be :
=Table A :: $B
Apply Fill Down
Copy paste it in cell A1 which is in a header row.
This formula does its duty but it’s not robust enough and will not survive to a Sort.
This is why in B2, I inserted a more robust formula :
=OFFSET(Table A :: $A$1,ROW()-1,2)
You will find details about the functions used in Numbers User Guide delivered with every copy of iWork ‘08
Yvan KOENIG (VALLAURIS, France) samedi 6 août 2011 17:45:22
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
The first suggestion was the simple answer I needed,
Thank you -
How can i extract data from oracle table to flat file or excel spread shee
Hello,
DB Version is 10.1.0.3.0
How can i extract data from oracle table to flat file or excel spread sheet by using sub programs?
Regards,
DHere what I did
SET NEWPAGE 0
SET SPACE 0
SET LINESIZE 80
SET PAGESIZE 0
SET ECHO OFF
SET FEEDBACK OFF
SET VERIFY OFF
SET HEADING OFF
SET MARKUP HTML OFF SPOOL OFF
Sql> SPOOL bing
select * from -------;
SPOOL OFF;
I do not see file.
I also tried
Sql> SPOOL /tmp/bing
select * from -------;
SPOOL OFF;
But still not seeing the fie, -
N82: Memory full. Delete some data from phone memo...
memory full. delete some data from phone memory
i deleted all of the messages in inbox and in memory card. i also tried *#7370#. stil the memory is full. i check the phone memory status everytime i delete the messages and it will show available memory for about 30kb. when i restart the phone and check the phone memory, it will indicate that it has 0 kb left. i didn't installed any application in it.
Message Edited by katnix on 13-Jul-2008 01:39 PMproper advice???? that's the advice i gave, take it or leave it. it's not for you tell me what's proper or not.
i don't remember seeing your name in the thread above, and i don't remember you TELLING me before that you don't want to format.
now just not to go into alot of words. there is a better way you can use to talk to people. because we are trying to help. if you like what we suggest, fine, if not, wait for another suggestion or come with one yourself.
if you have a registery cleaner or a temp file cleaner for symbian , please be so kind to offer it's name here.
Fear not those who argue but those who dodge -
How to restrict the user(Schema) from deleting the data from a table
Hi All,
I have scenario here.
I want to know how to restrict a user(Schema) from deleting the values from a table created in the same schema.
Below is the example.
I have created a table employee in abc schema which has two values.
EMPLOYEE
ABC
XYZ
In the above scenario the abc user can only fire select query on the EMPLOYEE table.
SELECT * FROM EMPLOYEE;
He should not be able to use any other DML commands on that table.
If he uses then Insufficient privileges error should be thrown.
Can anyone please help me out on this.Hi,
kumar0828 wrote:
Hi Frank,
Thanks for the reply.
Can you please elaborate on how to add policies for a table for just firing a select DML statement on table.See the SQL Packages and Types manual first. It has examples. You can also search the web for examples. This is sometimes called "Virtual Private Database" or VPD.
If you have problems, post a specific question here. Include CREATE TABLE and INSERT statements to create a table as it exists before the policies go into effect, the PL/SQL code to create the policies, and additonal DML statements that will be affected by the policies. Show what the table should contain after each of those DML statements.
Always say which version of Oracle you're using. Confirm that you have Enterprise Edition.
See the forum FAQ {message:id=9360002}
The basic idea behind row-level security is that it generates a string that is automatically added to SELECT and/or DML statement WHERE clauses. For example, if user ABC is only allowed to query a table on Sunday, then you might write a function that returns the string
USER != 'ABC'
OR TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'So whenever any user says
SELECT *
FROM table_x
;what actually runs is:
SELECT *
FROM table_x
WHERE USER != 'ABC'
OR TO_CHAR (SYSDATE, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') = 'SUN'
;If you want to prevent any user from deleting rows, then the policy function can return just this string
0 = 1Then, if somone says
DELETE employee
;what actually gets run is
DELETE employee
WHERE 0 = 1
;No error will be raised, but no rows will be deleted.
Once again, it would be simpler, more efficient, more robust and easier to maintain if you just created the table in a different schema, and not give DELETE privileges.
Edited by: Frank Kulash on Nov 2, 2012 10:26 AM
I just saw the previous response, which makes some additional good points (e.g., a user can always TRUNCATE his own tables). ALso, if user ABC applies a security policy to the table, then user ABC can also remove the policy, so if you really want to prevent user ABC from deleting rows, no matter how hard the user tries, then you need to create the policies in a different schema. If you're creating things in a different schema, then you might as well create the table in a different schema. -
Delete bulk data from multiple tables
Hi,
I am having two tables from which data needs to be deleted based on some where clause.
Can anyone help me how to delete bulk data means more than 10000 rows at a time to improve the performance.
Regards,
DineshLPS wrote:
This will be simple delete statement and make sure whether the where clause reffered columns are indexed.Indexing may or may not help. If he is deleting 10000 rows out of 20000 it won't help at all. In fact, indexing may
make things worse as it will slow down the delete.
Maybe you are looking for
-
HT204053 How do I alter credit card details
I am unsure how I did it, but my credit card details are stored on my App Store and entering my password lets me pay for apps - previously I had to enter the details of the card, or at very least the authorisation code. How do I undo this?
-
How to use Web Dispatcher in XI
XI receives some messages and passes them onto CRM for processing. The user ID that is used between XI & CRM communication of Service user type.Due to this reason, this user has consumed the dialog processes available during the process.The error
-
How many disk groups for +DATA?
Hi All, Does oracle recommends having one big/shared asm disk group for all of the databases? In our case we going to have 11.2 and 10g rac running against 11.2 ask... Am I correct in saying that I have to set asm's compatibility parameter to 10 in o
-
I clicked the text menu and then I clicked on align. I highlighted the text and the bar but I tried to center the text on the bar but it doesn't work correctly. Can anybody help me? http://server6.theimagehosting.com/image.php?img=fireworks.cd6.gif[L
-
Which middleware to use SAP Netweaver XI or Oracle Fusion
Hello All, I have to integrate several modules like CRM, Siebel, Telephony Supply Change Management, etc. --- ERP Integration Which is better middleware SAP XI or Oracle Fusion. Any suggestions, links/pdfs Regards