How to delete spool number if is status is waiting?

Seek helps. I use FUNCTION RSPO_R_RDELETE_SPOOLREQ to delete spool number. It works if this spool number's status is finished. But if its status is waiting, I find that the spool number is not deleted. Who can tell me how to delete such a spool number even though its status is waiting?
Thanks a lot.
Jack

Hi Jack,
TSP0E-RQIDENT is a spool number that you want to delete.
Please ensure you have authorization/permission to delete.
Regards,
Ferry Lianto

Similar Messages

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to find Spool number for a 2 steps background job.

Hi All,
How to find spool number (and also the background job name ) for a 2 steps background job.
in the table TBTCO i can see step numbers but i dont get the spool number. Is there any link between TBTCO and TSP01.
Also after getting the spool number i need to drill down on ALV report. I hard coded the spool number and was able to drill down using BDC and call transaction but when i press back button it is not returning to the ALV report.
Thanks,
Shiva.

Which one creates the spool? (first one I guess)
What kind of spool? (WRITE, sapscript, smartform, pdf...)
Do you use special statements like NEW-PAGE, or other things?
Are you sure that the spools are generated by these jobs? (did you compare the spool generation times and job run dates to be sure...)

How to delete my number of ipad messages?

How to delete my number of ipad messages? I know how to turn it off on settings>Messages>Send & Receieve, but my number is saved on my dads ipad and he could switch it on at any time! I want to permanently not have my number on the ipad, thanks in advance

Hi Bran3197,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
- Judy

How to delete a number of photos

Can someone tell me how to delete a number of photos
from my 2g iPhone without downloading them?
I know how to delete them individually but I want to delete a large number
thanks
Pete

you can only delete one at a time

How to delete maximum number of free accounts that is activated?

how to delete maximum number of free accounts that is activated?

You can try calling AppleCare. Otherwise, you can create an iCloud account on another iOS device or computer first, then setup that account on your phone.

How to delete a number from imessage

I have deleted a number from my contacts and its still showing up on my imessage.How can i delete this number?

Hi,
You can disable a "Receive At" item which will in turn remove it from the "Start new conversation from" drop down in the Messages app across Mountain Lion and Mavericks.
You can remove it from the iPhone or other iOS device.
However this will not remove it on either Messages 7.x.x (Mountain Lion) or Messages 8 (Mavericks)
In Mavericks you have to delete the .plist involved to remove the Aliases you don't want (and tend to have to re-enter the Apple ID as well)
With a Finder window Open, use the Go Menu whilst holding down the ALT key.
Select the Library that now appears in the menu list.
Navigate to Preferences.
Find com.apple.ids.service.com.apple.madrid.plist and drag it to the Trash
Restart the Messages app
8:50 pm Monday; April 7, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT3529 i would like to know how to delete a number that is no longer in my contacts but when i pull up my text messages that number still shows up how do i get rid of that

i would like to know to delete a number that still shows up in my text message people i can send messages to but is no longer a contact in my phone. but since i have sent the person a text in the past and when i type the name in it will pull it up how do i delete that

dam122577 wrote:
but wont restoring as new delete all my info on my phone
Yes. That is why I added...
it will disappear over time due to non-use.

How to delete large number of email notifications from facebook

I have been receiving email notifications from facebook for years. I only know how to delete them one at a time. I now want to clean up my computer and do not know how to delete these unneeded emails. they number in the thousands.

Holding Shift while you click selected everything between two mouse clicks.
Using Ctrl you can fine turn what is selected by clicking on thing to unselect them
Got the idea?

How to delete a PS network with status 'Technically Completed' (TECO)?

Dear all,
We have Webdynpro application, which will create a PS network in background. In the past it was working fine and many PS network are created. Now we have a scenario where some of the networks which are with status 'Technically Completed' (TECO) needs to be deleted from system. I tried to delete it from CJ20N, but it was not possible as the status is set to TECO. Please let me know how to delete a PS network which is with status 'Technically Completed' (TECO).
Thanks in advance.
Regards,
Vijay

The cluster goes out and finds all networks that are available. This is an automatic process. As long as there is a network there, it will show it. If you don't want it to show, disable the interface and it will disappear.
. : | : . : | : . tim
Thanks a million Tim! Disabling the correct interface made it disappear!
Actually, I had disabled the interface before I started this thread. When you posted the suggestion, I went back and looked at the network connections again and found out that I had disabled the wrong interface! My bad!
However, here is the interesting thing:
After I disabled the NIC and it disappeared from the FCM I physically disconnected its cable (actually I disconnected all unused / unconfigured NICs) ....then I re-enabled it. Now I see that FCM does NOT pick it up again.
I think FCM picked up those NICs because at one time I had put that NIC in the production VLAN (from the switch side).
One observation:
If you have NICs in a HV machine which are not connected to a switch, they do NOT show up in FCM. Once you connect them to some network, they start showing up. I guess by connecting them to a network, they are able to see NICs in other HV nodes.
Take a look at this screenshot. I have 6 NICs in there which are disconnected, none show up in FCM
-Rajeev rajdude.com

How to get spool number when using SUBMIT job

Hi All,
I am calling standard program using SUBMIT through JOB as below. Now I need spool number for this job to covert the output to PDF and send to mail. See the below code and guide me.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
    jobname          = name
IMPORTING
    jobcount         = number
EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS           = 4.
IF sy-subrc = 0.
data: Zscreen type table of RSPARAMS with header line.
   Zscreen-selname = 'PM_AENNR'.
   Zscreen-kind = 'P'.
   ZSCREEN-LOW = '500000000125'.
   APPEND ZSCREEN.
SUBMIT RCC00130 WITH selection-table Zscreen TO SAP-SPOOL
                    SPOOL PARAMETERS print_parameters
                   WITHOUT SPOOL DYNPRO
                    VIA JOB name NUMBER number
                    AND RETURN.
IF sy-subrc = 0.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = number
        jobname              = name
        strtimmed            = 'X'
      EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5

Hi,
Do this way, first get print parameters by using function module 'GET_PRINT_PARAMETERS'
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination    = 'LP01'
      list_name      = 'TEST'
      list_text      = 'SUBMIT ... TO SAP-SPOOL'
      immediately    = ' '
      line_size      = '1023'
      no_dialog      = 'X'
    IMPORTING
      out_parameters = wa_pri_params
      valid          = w_valid.
If it returns success then
    IF w_valid EQ 'X'.
      CONCATENATE 'R'
                   w_tabix
                   sy-datum+4(4)
                   sy-uzeit INTO
                   wa_pri_params-plist.
    ENDIF.
    SUBMIT rprccc00
           WITH firmennr = w_cid
           WITH bel_clus = 'X'
           WITH testlauf = ' '
           WITH not_lokl = 'X'
           WITH file_in = w_arc_out
           TO SAP-SPOOL WITHOUT SPOOL DYNPRO
           SPOOL PARAMETERS wa_pri_params AND RETURN.
    COMMIT WORK AND WAIT.
SELECT rqident
         FROM tsp01
         INTO w_rqident
         UP TO 1 ROWS
         WHERE rq2name = wa_pri_params-plist.
ENDSELECT.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid     = w_rqident
      no_dialog       = 'X'
      dst_device      = 'LP01'
      pdf_destination = 'X'
    TABLES
      pdf             = t_pdf.
Hope it solves your problem
Regards
Krishna

How to get Spool Number after submtting the program and return

Hi All,
Could you please assist me on this issue. I have ABAP program which will create a spool number and this spool number is generated by submitting the same report. Now when try to retrive the spool number from sy-spono it is displaying as 000000 but it suppose to be the spool which is created during submit program. COuld you please assist me on this issue. I have added the part of code for your reference,
DATA: l_params TYPE pri_params,
l_valid TYPE string,
w_spool_nr like sy-spono,
p_m_werks like marc-werks.
export p_werks to memory id 'P_WERKS'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING
out_parameters = l_params
valid = l_valid
IF sy-subrc <> 0.
ENDIF.
import p_werks from memory id 'P_WERKS'.
p_m_werks = p_werks.
SUBMIT zmmlist01 with p_werks eq p_m_werks
to SAP-SPOOL
spool parameters l_params
without spool dynpro and return.
write: sy-SPOno.
Thanks & Regards,
Nagaraj Kalbavi

Hi,
You can use the code snippet as below :
SELECT MAX( RQIDENT ) INTO G_SPOOL_NUM
FROM TSP01
WHERE RQCLIENT = SY-MANDT AND
RQOWNER = SY-UNAME.
Also you can use the FM RSPO_FIND_SPOOL_REQUESTS' and pass the relevant parameters to this FM. This should get you the desired results.
Hope this would be of some help!!
Regards,
Lalit Kabra

How to delete IMEI number of i phone5

pls tell is it possible to delete IMEI number of I phone5, which software can we use.

No. Why would you even want to try and do this unless you're a criminal?

How to get spool number within report?

Hi experts,
I have a report that writes some messages to spool. Within this report I want to write out the spool number (where the output goes to) to a Z-table. My question: Where do I get this spool number of the current running report from?
Thanks in advance for your help!
Kind regards, Matthias

Hi,
DATA: LC_RQ2NAME LIKE TSP01-RQ2NAME.
   F_REPID = Sy-repid.
f_uname = SY-UNAME.
CONCATENATE F_REPID+0(9)
              F_UNAME+0(3) INTO LC_RQ2NAME.
CONDENSE LC_RQ2NAME.
   SELECT * FROM TSP01
           WHERE RQ2NAME = LC_RQ2NAME
           ORDER BY RQCRETIME DESCENDING.
    F_RQIDENT = TSP01-RQIDENT.
    EXIT.
ENDSELECT.
TSP01-RQIDENT will be spool number.
regards,
dhan

How to recover spool number for a sapscript

Hi!
I'm using the standard function ' REPRINT_DUNNING_DATA_ACCOUNT' for printing dunning.
I need to send by email instead of print the sapscript that this FM generates.
After changing h_itcpo to do that my problem is that I'm not able to recover the number of spool that it generates (for conversion to pdf and email attachement).
     - syst variable have not this number
     - GET PARAMETER ID 'SPI' FIELD l_spool_c. don't work
     - change this variables to recover later spool with them don't work because standard asigns their own values on them
           h_itcpo-tddataset = 'test'.
           h_itcpo-tdsuffix1 = gt_mhnk-bukrs.
           h_itcpo-tdsuffix2 = gt_mhnk-kunnr.
Any idea?
Thk

I am not sure if I have got you right,but let me try..
there are couple of ways to get the spool number.. try if any helps you.
- by writing a Select query from TSP01, which will give you the lust and then select the latest one
- use of the below FM
     RSPO_FIND_SPOOL_REQUESTS
       RSPO_OPEN_SPOOLREQUEST'
       RSPO_RINIT_SPOOL_SP01
Hope one of them helps.

How to delete spool number if is status is waiting?

Similar Messages

Maybe you are looking for